CRM 2011: Can you control which form is used based not security roles, but on a field value?

I see that you can control which form is used based on security roles, but can you control it based on other field values?  I'd like a new record to use a different form until a given status is updated.  I have a status of draft and active. So
it would be nice if I could use form1 for those in draft, form2 for those that are active.  But I only see where you can control that via the security roles.
I can code all of this via JavaScript, but having the ability to use two separate forms would be nice.  Is that even possible.
Best regards,
Jon Gregory Rothlander

Hello,
Recheck following article - http://gonzaloruizcrm.blogspot.com/2014/11/avoiding-form-reload-when-switching-crm.html
Dynamics CRM MVP/ Technical Evangelist at SlickData LLC
My blog

Similar Messages

  • Can you control which devices are on network

    Is there an application to control and monitor the Airport Extreme Base Station Network?
    I'd like to be able to shut down access to, for example, my kids' devices at night without shutting down the whole network.

    Timed Access in AirPort Utility will allow you to control individual devices and the times that the device is allowed to connect to the wireless network.
    For example, you could setup Junior's iPad to be allowed to connect to the network Weekdays between 9:00 AM and 9:00 PM. Junior would not be able to connect to the network at any other times than those listed.
    Another device could be setup to have access to the network Weekdays between 5:00 PM and 10:00 PM, and so forth.
    Devices that do not have a specific rule set up for them are allowed to connect to the network at any time.

  • How can I control which email FaceTime uses?

    When my daughter uses FaceTime from her Mac, both my wife's and my iPads ring.  She would like to be able to choose to FaceTime just one of us at a time.  When she initiates the call from her Mac, she chooses my wife's email address, but I also get the call even though that address is not entered in my iPad's FaceTime settings as an address that I can be reached at.  The same happens if she tries to call just me, my wife also gets the call.  My wife and I have no email addresses listed on our FaceTime settings in common.  The thing we do have in common is an Apple ID with the credit card we share, so all purchases are done through that Apple ID.  My wife has a separate Apple ID on her iPad for everything else though.
    Any ideas on how to allow my daughter to choose which of us that she'd like to contact?

    For Apple IDs, we have:
    My iPad:  [email protected] (this is our shared account with credit card for purchases)
    Wife's iPad:  [email protected]
    Daughter's Mac:  daughter [email protected]
    We don't have iPhones, so there are no phone numbers in our settings for how we can be reached.  None of us share the same email addresses in our "You can be reached at" settings.  My wife had her work email address there, along with her AppleID address, but the work email said "verifying" next to it, but that has probably said that for years.  My daughter tried that email, and my wife's Apple ID emails, and every time my iPad also rang.  Even after my wife completely removed her work email, my daughter was able to make a FaceTime call to that address and got both of us.
    I appreciate your help on this, but these were what I thought were obvious settings to check and already checked them all.  What seems to be obvious to both of us, is not working.  Weird.

  • How can you determine which pages are using a specific symbol?

    I want to find all the pages that are using a specific symbol, but I don't know how.  I can't simply switch symbols because some have specific text & want to switch them with more generic smart buttons.  I'll have to find every instance to update the text.
    thanks!

    me too, my file has 39 pages with many unuse symbols, now I want to delete those unuse.
    I found that after deleteing those unuse in Page 1, actually they are being used in other page,
    I can't find the way to delete them all at one time for all pages.
    and I am using CS3

  • Can you tell which number is used to call your iphone?

    I have 2 numbers, my iPhone and then a Google Voice number that rings on my iphone.
    Is there a way to tell which number someone is using when they call me? There caller ID is THEIR number, not mine. Looking at all the information, I don't see how to tell which number they are calling me with (preferably real time).
    thanks
    bob

    Not really. The only option is to change your Google Voice caller ID settings.
    Caller ID (in)
    Display caller's number
    Display my Google Voice number

  • Can you create a javascript dynamic menu based on security data in oracleDB

    I am looking for a dynamic javascript menu that is generated based on the user role... basically i get the user role from ldap and then I have a Security table in oracle data base that has the permission info and i want to generate my dynamic menu based on the data in the database table.... the table has the following columns
    private String userId;
    private String security_level; // page level , field level
    private String permission; //CRUD
    private String permissionType; //ALLOW, DENY

    Hello Suzie,
    It is possible but you have "many" ways to do it, since what will happen is the javascript will be generated by an application.
    Are you developing a J2EE application? with or without JSF?
    The best way will be to Google to find a good Javascript menu library, and adapt the generation of it based on the content of your database.
    Regards
    Tugdual Grall

  • Can you control volume without using side controls?

    Can you control the volume without using side controls?

    Or, if your iPad is asleep/locked, double click the home button and you'll get an on-screen volume control and play/pause iPod controls (no need to unlock).

  • I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form".  I can't figure out how to get to the page that you choose which form you want

    I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form".  I can't figure out how to get to the page that you choose which form you want. How would I do that?

    Pct,
    In the Numbers spreadsheets window where all your documents are shown as icons, tap the Plus Sign.
    Choose Create Spreadsheet
    Select the template you want to use
    Jerry

  • Can you control Lion on your desktop with an iPhone?

    Can you control Lion on your desktop with an iPhone?  I do not want to buy a wireless trackpad.  Who needs all those batteries?  Hoepfully the iPhone can control it in the meantime, and then they need to make wired trackpads. 

    fliplip1 wrote:
    hhmmm. possibility, buT why? It's there in black and white, it just takes a few more mins to read it.
    I guess there are multiple ways in which people interpret the same sentence. Not everything is obvious to everyone.
    If confused, people generally ask in the forums.

  • IOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

    iOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

    I think that is influenced by the order in which the apps are installed on the iPad (I believe that it's the most recent 10 ?) - but as I haven't got more than 10 apps that support any document/file type I can't check.
    If you want to able to edit the list, then you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

    When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
    I store my PSD files adjacent to the original RAW file from which it was derived.
    If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
    How can I control which Photoshop will open a file I select when opening it through Bridge?.

    Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
    Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
    But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
    Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
    And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

  • Can I control which files a transferred on migration assistant

    Can I control which files are imported from my pc using migration assistant?

    Limited.  You can choose user accounts, but not individual files or foldes.

  • Can I control which of my devices shows photo stream

    can I control which of my devices shows photo stream?  I want to be able to store my photos privately in iCloud.  I have my sons iPods synced to my iTunes Library but do not have my pictures on their devices.  Can this be in the iCloud without going to all devices?

    The only way to prevent a device from showing your photo stream photos is to either go to Settings>iCloud and turn off photo stream on the device or to not share the same iCloud account with the device.  If you want to turn off photo stream on your son's iPod you can then go to Settings>General>Restrictions, set a restrictions passcode, then go to Accounts (at the bottom) and set to Don't Allow Changes.  This will prevent him from changing this setting without the passcode.  (If you do this, be sure to write down the restrictions passcode.  If you ever lose it, the only way to remove it from the device is to restore it as a new device, without using the backup, losing all data and start over.)

  • HT4260 Can i control which wireless clients i like to betrol which wireless clients i like to be connected on my airport base station?

    Can i control which wireless clients i like to betrol which wireless clients i like to be connected on my airport base station?

    Yes. Use AirPort Utility's MAC Address Access Control.
    AirPort Utility > select your base station > Edit button > Network tab > "Enable Access Control" > click the Timed Access Control button.
    You need to specify the clients you want to control by their MAC address, which is usually printed on the device's exterior case.

  • Can you see which timeline clips are being used in Media Browser?

    I'm a relatively new user and may not be familiar enough with cs5.5 but
    is there a way to see what clips are being used on the editing timeline in the media browser.
    I open premiere pro - Project is loaded. I edit the scene until it is finished.
    When I look over at the media browser, all my raw clips (some of which I'm
    using on the editing timeline) look the same - I can't tell which ones I using on the timeline.
    The reason I ask - when I fiinish editing a scene it would be nice to glance over at the
    media brower folder where my raw clips are located - easily see which ones I'm using because they
    are highlighted or checked and then delete the ones I no longer need.
    Is there a way to do this now?
    Thanks
    Jeff

    I dont think so  but a better way is to look in the top of the Project Window and there is a drop down that will show you all the useage instances of the clip.  You can click on them to go to them in the timeline.

Maybe you are looking for