CRM 4.0 and BI 7.0 - CRM Workbooks are blank after upgrade to BI 7.0

We have upgraded to BI 7.0 SP13. When executing CRM reports they return no data. It appears that the variants are not being passed correctly to BW to extract the data. We have run all of the required programs to convert variants after upgrade.
This is very urgent. Any suggestions would be greatly appreciated.
Thank you,
Teri
Message was edited by:
teri chandler

Hello Shivani,
please do not request documentation via E-Mail. Try to share it i.e. in the SDN Wiki.
Regards
Gregor

Similar Messages

Performance by system and utilization reports are blank after upgrading SCOM 2012 SP1 to SCOM 2012 R2

Hi Experts,
We are getting blank Performance reports after upgrading to SCOM 2012 R2. Can anyone provide fix for this issue?
All the reports are working fine except Performance by system and utilization report.
Thanks in advance.
Regards
Karthick Malayalan

Hi Karthick,
Here are two links for your reference regarding to the blank report issue:
SCOM 2012 performance by system report and perform by utilization
https://social.technet.microsoft.com/Forums/systemcenter/en-US/b1b13318-2de5-4940-82a2-a8ce5b832c11/scom-2012-performance-by-system-report-and-perform-by-utilization?forum=operationsmanagerreporting
Base OS MP Version 6.0.6989.0 Imported? And Now Some Reports Are Partially
Empty?
http://thoughtsonopsmgr.blogspot.com/2012/11/base-os-mp-version-6069890-imported-and.htmlRegards,
Yan Li
Regards, Yan Li

Safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

There are several threads about this problem, most notably one called 'Invalid Certificates' is over 4 pages long. Many of us have experienced difficulty connecting to banking and other secure sites. On my Macbook Pro, I cannot get to my banking site with any browser, however I can get there on my iMac using Safari, but get the 'Invalid Certificate' notice with FF and Chrome. The problem started after the installation of 10.7.4. I have sent a message to Apple--they will be dismayed to hear that I cannot complete an order at their online store!

IMessage and FaceTime won't accept my Apple ID after upgrading to Mountain Lion

iMessage and FaceTime won't accept my Apple ID in order to activate after upgrading to Mountain Lion on my MacBook Pro.
My Apple ID works to sign in to the App store as well as on my iphone and iPad.
What do I need to do?

This Apple doc might help ya out -> iOS: Troubleshooting FaceTime and iMessage activation
Troubleshooting Apple ID activation
After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that you have an active Internet connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location.

Xul runner platform version is not compatible and fire fox will not open - this is after upgrading to v 5

After trying to updat from 4.0 RC2 to 5.0.1 Error message appears
error: Platform version '2.0.1' is not compatible with min version >=5.0 <=5.0.
Have uninstalled and tried to re install earlier version but now get same error message but now get is not compatible with version >=2.0 <=2.0
currently not able to run or load fire fox at all

See:
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
The updater wasn't able to update all the files and some were left as older versions.
You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

"show my windows and tabs from last time" does not work after upgrade to 8.01

After I upgraded to the latest v8.01 I have lost all my tabbed sites and even when trying to add them and save them with the Tools>Options>General>Start up>when Firefox starts selected feature "show my windows and tabs from last time" it does not hold the saved sites and when browser is restarted it always loses all the tabs and only shows one tab with Firefox home webpage. I need to have several sites open to work and the only way to do that now is to make sure I click the "Use current pages" under General Option in Tools. It is getting very annoying because I keep changing my tabs to different websites during a session and I am used to just closing the browser, relying on having them all back in when restarting Firefox.

Make sure that you do not use Clear Recent History to clear the Browsing History when you close Firefox.
*https://support.mozilla.com/kb/Clear+Recent+History
*https://support.mozilla.com/kb/Firefox+does+not+ask+to+save+tabs+and+windows+on+exit
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created

Can't sync my iPad 2 and can't open my newly purchased app after upgrading to iOS 7

Ever since I upgraded my iPad 2 to iOS, I have two problems.
First off, I can't sync my iPad 2. This error message keeps popping up: "The iPad '(my ipad name)' could not be synced because the sync session failed to start. My iTunes is the lates version 11.1.1.11. I even tried to deauthorize the computer and reauthorize it. I also tried to log out and log in again. I also tried to re-install the iPad driver from the Device Manager of my Win 7 (browse to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers and click OK > next.) I tried all possible ways suggested in the communities discussions but still can't get the sync to start.
Second problem, since I can't sync from the iTunes database, I purchased the app from App Store on my iPad. After downloading the app, I touched the "OPEN" button but the app could not be launched. This happens to all app's purchased after I upgraded the iPad to iOS 7, not matter the app is free or costs money. Apps purchased BEFORE iOS 7 update can be opened without any problem.
Any suggestion?

Just think of the third problem. I can't do backup neither, so I dare not restore my iPad to its default as I didn't do the backup the moment before upgrading it to iOS 7 (which I regret very much now). I have trusted Apple for years and didn't think of such problems could happen after iOS upgrade.

Photos and Podcasts won't sync to Apple TV after upgrade

I recently switched from one MacBook (10.5) to a newer one (10.6) running iTunes 9.0.2 (25) and have upgraded my Apple TV software to 3.0.1. I was able to sync the Apple TV to the iTunes library on my new MacBook, but it will only sync music and movies. I get an error message saying "iTunes cannot sync photos because of a problem on your computer. An unknown error occurred (-50)." I have already tried deleting and re-creating the iLife preferences file and the xml file for iPhoto. Can anyone help me figure this out?

I had a similar problem with my cousin's Apple TV and new 27" iMac. After finding a warm body to speak with at Apple, they asked if there were any slide shows in iPhoto. When I said, yes, they suggested deleting them. Since the photos were already in albums, that was not a problem. After deleting the slide shows from iPhoto, the photos sync'd to the Apple TV just fine.
They did have a follow on suggestion that I did not need to try and that was to restore the Apple TV to the factory settings, downloading the software updates and trying to sync. Please note that this was not necessary and so I do not know if this is an alternative "fix".
Deleting the slide shows from iPhoto did the job.

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

PDF presets are lost after upgrade to CS6 and uninstallation CS4

Since upgrading to CS6 from CS4 and subsequently uninstalling CS4 (and CS3) - as advised by IT - I have lost the presets I had when I export to pdf from Illustrator & Indesign - the drop down menu options of PRESS QUALITY, HIGH QUALITY and SMALLEST FILE SIZE have gone.
I have a back up of CS4's settings but no idea which one I need and what to do with it in order to reinstate these options.
Any ideas?
Thanks so much

You simply would have to copy the presets into the folder:
C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Settings
I'd be careful, though. Overwriting default presets with an older version may cause compatibilty issues.
Mylenium

My camera folder does not open and all my pictures are lost after upgrading?

after the upgrade and i dont think i am going to use cloud.....i tried to open my camera roll and there are no pictures at all! and now it keeps crashing i click it and it closes right away???? anyone have any ideas?

Hello swordbreaker. Thanks for the response.
The "My Safe" bit seems to be a Toshiba programme written by UPEK as part of the fingerprinting set-up on the Satellite 200. My Safe is an encrypted folder that is sitting on the desktop. The problem I had was that it no longer did anything when I double clicked it. The problem occurred after I went through the Norton de-install and then install routines. (I was trying to install Ghost but it would not install.
Then I found a Norton Protection suite which I never used had been installeed on my U200 when I bought it and I had to deinstall it before Ghost would install.) I think you were correct that Norton was the cause of the problem because it corrupted something in the UPEK programme.
After a little thrashing about I found that I could download the UPEK programme from Toshiba and I did that and re-installed the fingerprint stuff and My Safe then worked. your response did give me the heart to find the answer.
Thanks.
Regards, Robert.

Is anyone else having issues with firefox checking toolbars and add ons every time you log on after upgrading to 10.0.2

I upgraded to the newest Firefox 10.0.2 a few days ago and now every time I log onto the internet with Firefox it says checking tool-bars and addons and loads slowly with my homepage and Firefox page saying thanks for upgrading anyone else having this issue have 2 tool bars that load they are charter and yahoo

Which security software (firewall, anti-virus) do you have?
Some security software has virtualization features that can cause problems by protecting and restoring files in the Firefox profile folder.

YouTube Videos and others won't play on iPad mini after upgrade to iOS 7.0.2, any suggestions?

I upgraded my iPad mini to the iOS 7.0.2 software and now videos (YouTube, USA Today, etc) won't play. I have already done a restart (holding down the menu button and on button) and eern after restart, videos won't play. Any suggestions?

when u do a restore it deletes off everything on the device, including software. then it reinstalls the software from a new download package. this will ensure ur device isnt getting the same glitch in its system that ur current software has if that is the issue. when u restore from the backup u made AFTER uve done the 'restore ipad' that will put all of ur stuff back onto the ipad. i would suggest deleting off the youtube app b4 doing the back up and then readding it after the restore and restore from back up phases. if all of that doesnt work, youtube is the one with the problem and u should contact them.

Top leven navigation and Tool area dissapear after upgrading SP19

Hi all,
we have upgraded the J2EE engine and the EP to the SP19 and when we enter the Portal, the top level navigation and tool area have dissapear.
It could be some parameter wrong or an error during the upgrading?
Thank you in advance for your help.

Hi Rahul,
See SAP Note: 1002832. These are the details:
Reason and Prerequisites:
The problem is caused by a program error.
This note applies to NW04S SP8 - SP10 and NW04 SP16 - SP19.
Solution:
The problem is fixed with NW04S SP11 and NW04 SP20.
The reason for the problem are missing ACLs that are normally created automatically when roles are imported.
In order to resolve this problem please do the following steps;
1 - Logon to the Portal with user having "super admin" rights.
2 - Replace in URL the "/irj/portal" part with the following /irj/servlet/prt/portal/prtroot/com.sap.portal.admin.acleditor.listPermissions.
This starts a component that lists all permissions in the PCD. It might take some time until it is finished.
3 - Please scroll all the way to the bottom of the list. If there is a botton "fix inner acl", click the button. The missing permissions for the roles will be created. If there is no such button, the permissions are OK. The reason for the symptom is something else then.
Hope this helps.
Regards,
Pooja.

IPhone and iPad won't sign in to iCloud after upgrading to iOS 6

After upgrading to iOS 6, get the message "check that you are signed in to iCloud."

Look here.
http://support.apple.com/kb/TS3988

CRM 4.0 and BI 7.0 - CRM Workbooks are blank after upgrade to BI 7.0

Similar Messages

Maybe you are looking for