CRM 5.0 Installation with MS-SQL and windows 2003 server

Hi,
I have to install CRM 5.0 with MS-SQL 2005 and ECC 6.0 with Oracle 10g and integrate with QAS(Third party tool).
My question are:
1.Can we install all there application on single server.
2. what s/w units we have to chose generally and what are standard(ie. EP,TREX etc.....)
3.Can we install the s/w units later after CRM core installation.
I am a BASIS Consulatnt and first time installing the CRM.
Regards
Alok

Hi Alok,
1. You can install all the applications in one box, But it is not advisable as the performance of all the applications can degrade.
2. Software units like EP, Trex are installed based on the business needs, requirements...
3. You can proceed initially with the installation of CRM Core components and later you can install other components/ software units.
Thanks
Ashok. R

Similar Messages

  • Installation of SAP NetWeaver on Windows 2003 Server ( 32 Bit )

    Hello Gurus,
    I am planning installation of SAP Net Weaver - SR2 on Windows Server 2003 ( 32 Bit ) and oracle 10g is my database.
    can anybody guide me from where I can install the software coz in the market place SAP N/W-SR3 is available.
    Is SAP N/W - SR3 is recommeded for Windows 2003 Server ( 32 Bit ).
    Can any body guide me the process & my qurey.
    Thanks & Regards
    Shishir

    Read SAp note Note 1108852 - SAP NetWeaver 7.0 / Business Suite 2005 SR3: Windows
    it says:
    21/MAY/08
    SAP system installation only supported on 64-bit operating systems, except for  dialog instances
    As of SAP NetWeaver 7.0 SR3 and Business Suite 2005 SR3, SAP only supports to install dialog instances on 32-bit operating systems. All remaining SAP system instances (central instance, database instance, central services instance (SCS), ABAP central services instance (ASCS)) must be installed on 64-bit operating systems. Therefore the folder "SAP Systems" is not available on the "Welcome screen", when you start the installation from a installation master DVD for 32-bit.
    You might need to install dialog instances on 32-bit if you want to use 32-bit SAP NetWeaver components, such as Adobe document services. We recommend, however, to first check whether these 32-bit components can run on 64-bit operating systems. If so, we recommend to also use 64-bit systems for these components, including the dialog instance.
    If you want to install a non-productive SAP NetWeaver 7.0 SR3 based system (test systems or development are normally productive systems)  on 32-bit, proceed as follows:
          1. Install a SAP NetWeaver 7.0 SR2 (SAP ERP 2005 SR2, SAP CRM 5.0 SR2 SAP SCM 5.0 SR2, SAP SRM 5.0 SR2) system.
          2. Patch this system to SAP NetWeaver 7.0 SR3 (SAP ERP 6.0, SAP CRM 5.0 SR3, SAP SCM 5.0 SR3, SAP SRM 5.0 SR3).

  • Calendar Connector and Windows 2003 Server

    I'm trying to get the connector setup and functioning on a windows 2003 server box with outlook 2003, however the install process generates several failures, and never is able to completely finish. Everything goes fine, until it gets to the point of copying files, at which point I recieve a warning about the uninstaller not functioning properly, so I will be unable to uninstall the application, then the installer generates an application error as soon as it finishes copying files. Below is included the OCSETUP.LOG file, should it provide any more information. Thanks for any help.
    Start setup
    Install time: 1-18-2004 01:43:01
    Searching for MS Outlook installation : OK
    Check install package :
    Version :
    Install date : 200312121427
    Enter CheckRequirements.
    Running : Win 2000
    Exit CheckRequirements
    Check admin rights : OK
    Start FillLangIDList
    LCID: 1033
    LCID: 2052
    LCID: 4100
    LCID: 3076
    LCID: 5124
    LCID: 1028
    LCID: 1030
    LCID: 1043
    LCID: 1035
    LCID: 1036
    LCID: 1031
    LCID: 1032
    LCID: 1038
    LCID: 1040
    LCID: 1041
    LCID: 1042
    LCID: 1044
    LCID: 1046
    LCID: 2070
    LCID: 1034
    LCID: 1053
    LCID: 1055
    End FillLangIDList
    Enter GetInstallMode
    Silent install : FALSE
    Exit GetInstallMode
    Loading install dll : OK
    Check if OL is running
    Check OL running exit
    Enter CheckOutlookVersion
    Outlook version : 11.5510
    Get Outlook service option :
    Exit CheckOutlookVersion
    Enter CheckPreviousVersion
    First time install or the uninstall was here before or old version.
    We're installing over another version
    Try to find an old version
    Old version =
    Result check version : 0
    Exit CheckPreviousVersion
    Enter SetupInstall
    Exit SetupInstall
    Enter SetupScreen
    Exit SetupScreen
    Setup screen
    Enter ShowDlgs
    Check the disk space
    Target dir C:\Program Files\Oracle\Outlook Connector
    Select lang
    Select lang: Chinese (Simplified)
    Copy comp: Lang Chinese Si No
    Select lang: Chinese (Traditional)
    Copy comp: Lang Chinese Tr No
    Select lang: Danish
    Copy comp: Lang Danish No
    Select lang: Dutch
    Copy comp: Lang Dutch-Nl No
    Select lang: Finnish
    Copy comp: Lang Finnish No
    Select lang: French
    Copy comp: Lang French No
    Select lang: German
    Copy comp: Lang German No
    Select lang: Greek
    Copy comp: Lang Greek No
    Select lang: Hungarian
    Copy comp: Lang Hungarian No
    Select lang: Italian
    Copy comp: Lang Italian No
    Select lang: Japanese
    Copy comp: Lang Japanese No
    Select lang: Korean
    Copy comp: Lang Korean No
    Select lang: Norwegian
    Copy comp: Lang Norwegian-Bk No
    Select lang: Portuguese (Brazil)
    Copy comp: Lang Portuguese-Br No
    Select lang: Portuguese (Portugal)
    Copy comp: Lang Portuguese No
    Select lang: Spanish
    Copy comp: Lang Spanish No
    Select lang: Swedish
    Copy comp: Lang Swedish No
    Select lang: Turkish
    Copy comp: Lang Turkish No
    Select lang end
    Exit ShowDlgs
    Enter ProcessBefore...
    Exit ProcessBefore...
    Enter MoveFileData
    Enter HandleMove...
    Exit MoveFileData
    Enter ProcessAfter...
    App path : C:\Program Files\Oracle\Outlook Connector
    Exit ProcessAfter...
    Enter SetupRegistry
    Exit SetupRegistry

    Welcome to the forum.
    I hope you mean when robohelp output is published to a
    server, rather than robohelp itself being installed on a server.
    If that is what you meant, look at Snippet 57 on my
    site.

  • Iphone 5 S can't get sync with itunes installed on windows 2003 server SP2

    After successfully installed itunes 11.1.5 for windows (i'm using windows 2003 server SP2 32bit). Whenever time I connect my iphone 5S to this computer, it always pops up an error message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again"
    After I uninstalled/reinstalled many times I got successful install iTunes software, but this still having problem with this error message. When I open iTunes application and plug my iPhone 5S it always show the above error message & on iTunes application --> Files --> Devices I couldn't see any devices available (i.e Syns option is faded out & not clickable)

    Hi Tolga,
    You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
    1) Start sapinst, under your <TREX_PATCH> path
    2) Ignore AMD64 warning popup
    3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
    4) Download and execute "vcredist_x64.exe" then run installer
    5) After respective installation click on "Retry" button on error popup
    At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
    Best regards,
    Orkun Gedik
    Senior SAP Development And Basis Consultant

  • Problems with Tuxedo8.0 under Windows 2003 Server

    Hello All.
    Could you please help me?
    When we were choosing which OS to install on our Tuxedo developers server we
    decided
    to try Windows 2003 server. We did not suppose that we could have any
    problems
    with this choise. But we have!
    We use it with DB 7.2 workgroup edition and Tuxedo 8.0 (PatchLevel 172).
    When one of server processes crashes (for example by exit(1) or by
    exception)
    (it happend not so rarely, because this server is actively used in
    development
    and testing processes) we cannot restart this server process!
    When I write "restartsrv -i SrvId" in command line nothing happens.
    When I write "tmboot -i SrvId" it says "Duplicate server".
    When I write "tmshutdown -i SrvId" it just hangs and I have to wait for 10
    minutes
    while it says "CMDTUX_CAT:949: WARN: Shutdown failed. 0 processes stopped."
    Tuxedo WebAdministration conlsole says almost the same - "Failed to
    deactivate SRVGROUP/200
    (still in state ACTIVE)-10:CMDTUX_CAT:1689: ERROR: Could not shutdown any
    servers".
    As a result any server crash (including expected) leads to 15 minutes
    waiting!!!
    As you understand it cound not be accepted!... and it is very annoying. :-)
    This problem never happened under Windows 2000 server (a week before I
    returned from site
    installation where this software works fine under Windows 2000 server).
    How can we solve this problem?
    Or should we downgrade our OS to Windows 2000?
    With regards,
    Dmitry.

    Dmitry,
    Try a bbclean from the tmadmin command line to clean up the BBL so you will be
    able to restart the server using the tmboot command.
    In addition to this check the values for SCANUNIT and SANITYSCAN in the ubbconfig.
    The observation that it takes 15 minutes for TUXEDO to discover that your server
    has crashed suggests they have values that might be too high.
    Winfried Scheulderman
    "Dmitry Bond" <[email protected]> wrote:
    Hello All.
    Could you please help me?
    When we were choosing which OS to install on our Tuxedo developers server
    we
    decided
    to try Windows 2003 server. We did not suppose that we could have any
    problems
    with this choise. But we have!
    We use it with DB 7.2 workgroup edition and Tuxedo 8.0 (PatchLevel 172).
    When one of server processes crashes (for example by exit(1) or by
    exception)
    (it happend not so rarely, because this server is actively used in
    development
    and testing processes) we cannot restart this server process!
    When I write "restartsrv -i SrvId" in command line nothing happens.
    When I write "tmboot -i SrvId" it says "Duplicate server".
    When I write "tmshutdown -i SrvId" it just hangs and I have to wait for
    10
    minutes
    while it says "CMDTUX_CAT:949: WARN: Shutdown failed. 0 processes stopped."
    Tuxedo WebAdministration conlsole says almost the same - "Failed to
    deactivate SRVGROUP/200
    (still in state ACTIVE)-10:CMDTUX_CAT:1689: ERROR: Could not shutdown
    any
    servers".
    As a result any server crash (including expected) leads to 15 minutes
    waiting!!!
    As you understand it cound not be accepted!... and it is very annoying.
    This problem never happened under Windows 2000 server (a week before
    I
    returned from site
    installation where this software works fine under Windows 2000 server).
    How can we solve this problem?
    Or should we downgrade our OS to Windows 2000?
    With regards,
    Dmitry.

  • SCEP on ISE 1.2 and Windows 2003 Server

    Hi there
    has anyone ever be able to get SCEP on ISE 1.2 working with Windows 2003 Server? I know Cisco recommends Windows 2008 Server onwards, but sometimes the server infrastructure is not yet there.
    Thanks in advance and best regards
    Dominic

    Hmm, good question that I would also like to know the answer to. All of my deployments have been either 2008 or 2012. I believe long time ago I got it working in my lab with 2003 but then my 2003 server blew up so when I re-created it I did it with 2008. However, I cannot confirm 100% and even if it was true it was not in a full production environment. So it would be nice if someone else can chime in here. 
    I did come across this though that would suggest that it is supported with some tweaks:
    http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_ISE.html
    Windows Server 2003, Microsoft SCEP (MSCEP) required a Resource Kit add-on to be installed on the same computer as the CA. In Windows Server 2008, MSCEP support has been renamed NDES and is part of the operating system. NDES may be installed on a different computer than the CA (http://technet.microsoft.com/en-us/library/cc753784%28WS.10%29.aspx).
    Thank you for rating helpful posts!

  • OS 10.3.9 and Windows 2003 Server - Can't get to the network

    My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
    The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
    Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
    Thanks.
    Power Mac G5   Mac OS X (10.3.9)  
    Power Mac G5   Mac OS X (10.3.9)  

    My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
    The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
    Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
    Thanks.
    Power Mac G5   Mac OS X (10.3.9)  
    Power Mac G5   Mac OS X (10.3.9)  

  • WRV54G and VPN and Windows 2003 Server

    Hello. I use Windows 2003 Server on my laptop and trying to establish VPN into my WRV54G. QuickVPN is not compatible with the OS, so that's not an option. I tried the manual setup and I got to a point where I had to enter the destination IP address. I use a DynDNS address and so I won't have a static IP.
    I'm using firmware version 2.39.2.
    Thoughts?
    Thanks!

    First thing i would like you to check is if you are able to "ping" the WAN ip address for the WRV54G.
    Also what are the settings that you have on the WRV ??? typically the remote secure group and remote security gateway should be set at "any".
    In the WRV...under the VPn go to advanced VPN and sset the mode to "agressive" , enable keep-alive and netbios broadcast....
    let me know if this work or let me know a few more details.

  • DLU - Zen3.2sp3 and Windows 2003 Server TS

    Hey guys,
    Im using Windows 2003 Server with TS installed for Citrix 4.0 running
    Netware 5.1 Sp7 with Zen3.2 sp3. Are there any issues with DLU working on
    this setup. At this stage its not working. Using the Novell Client 4.90 Sp2.
    Policy works fine on XP Pro, Windows 2000 server and Pro.
    Any help would be appreciated.
    Thanks
    Rami

    rami,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Software Packager and Windows 2003 Server

    I want to make an installation cd ( with Oracle Software Package 2.2.0.16.0) having my software bundled with Oracle Database 9.2.
    I'm getting the following error log generated each time I try to install my components in windows 2003 Server (OSP action = CopyDllGroup):
    java.io.IOException: The system cannot find the file specified
         at oracle.sysman.oii.oiix.OiixJarClassLoader.updateEntriesList(OiixJarClassLoader.java:263)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.<init>(OiixJarClassLoader.java:209)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:412)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:431)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:444)
         at oracle.sysman.oii.oiis.OiisLibraryLoader.loadLibrary(OiisLibraryLoader.java:161)
         at oracle.sysman.oii.oiis.OiisLibraryLoader.<init>(OiisLibraryLoader.java:103)
         at oracle.sysman.oii.oiis.OiisActionLibLoader.<init>(OiisActionLibLoader.java:40)
         at oracle.sysman.oii.oiic.OiicInstallSession.getLibLoader(OiicInstallSession.java:4633)
         at oracle.sysman.oii.oiic.OiicInstallSession.getActionLibLoader(OiicInstallSession.java:4399)
         at oracle.sysman.oii.oiis.OiisCompActions.doActionImpl(OiisCompActions.java:1046)
         at oracle.sysman.oii.oiis.OiisCompActions.copyGroupActionInner(OiisCompActions.java:885)
         at oracle.sysman.oii.oiis.OiisCompActions.copyGroupAction(OiisCompActions.java:748)
         at oracle.sysman.oii.oiis.OiisCompActions.doAction(OiisCompActions.java:546)
         at Components.PBDK.v10_2_0_75_16.CompActions.doAction(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompInstallPhase1.doActionP1copyDllGroup2(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompInstallPhase1.stateChangeActions(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompActions.stateChangeActions(Unknown Source)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiilActionThr.run(OiicInstallActionsPhase.java:604)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase.executeProductPhases(OiicInstallActionsPhase.java:2199)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase.doInstalls(OiicInstallActionsPhase.java:2052)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiInstRun.run(OiicInstallActionsPhase.java:2945)
         at java.lang.Thread.run(Unknown Source)
    In Windows 2000 Server this installation finished successefully.

    Welcome to the forum.
    I hope you mean when robohelp output is published to a
    server, rather than robohelp itself being installed on a server.
    If that is what you meant, look at Snippet 57 on my
    site.

  • Clean Access and Windows 2003 Server

    I am trying to install the Clean Access Client on a VM running Windows 2003 Server. When I connect to our customer's network the VPN client appears to connect properly and I see the Clean Access window. Then it all seems to fall over. My customer tells me I should see a blue window with a red OK button on it but I never see it. As a result I never get completely into the network. Is this because I am running this on Windows 2003 Server or should I be looking at something else? Can this run in a Virtual Environment and on 2003 Server?

    I work it out partially by myself:
    1)
    (excuse me, I meant "kinit and Krb5LoginModule" not "kinit and kinit.exe").
    Krb5LoginModule seems to work now (with TCP). The output is:
    KRBError:sTime is Tue Jun 01 17:13:51 CEST 2004 1086102831000
    suSec is 945761
    error code is 52
    error Message is Response too big for UDP, retry with TCP
    realm is SSOTEST.RTC.CH
    sname is krbtgt/SSOTEST.RTC.CH
    KrbKdcReq send: kdc=rtcnt978.ssotest.rtc.ch TCP:88, timeout=30000, number of retries =3, #bytes=232
    DEBUG: TCPClient reading 1496 bytes
    KrbKdcReq send: #bytes read=1496
    KrbKdcReq send: #bytes read=1496
    EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
    KrbAsRep cons in KrbAsReq.getReply sso_testuserCommit Succeeded
    Which is what I want (it tries first with UDP, then the KDC says the TGT is too big for UDP and the client tries again with TCP)
    2)
    I still have the error :-(

  • RoboHelp X5 and Windows 2003 server

    Does enyone know if I have to change some robohelp settings
    when robohelp is installed on a windows 2003 server?
    I'm working on merged htm help files and since we moved all
    files to a windows 2003 server, I noticed that the index and the
    search function of the newly compliled files don't work anymore.
    The search displays the message 'No topics found' when I perform a
    search action in a newly compiled project
    The index only displays the index keywords of the main
    project and not the index keywords of the linked projects.
    I'm looking forward for any suggestion to fix this
    problem.

    Welcome to the forum.
    I hope you mean when robohelp output is published to a
    server, rather than robohelp itself being installed on a server.
    If that is what you meant, look at Snippet 57 on my
    site.

  • Oracle Discoverer and Windows 2003 Server

    Did anyone know if Discoverer 4.1 is compatible on windows 2003 server?
    Also if Discoverer 10g is also compatible on windows 2003 server?
    Thanks.

    Hi,
    No, Discoverer 4i is not supported with Windows 2003, see Note 332433.1. 10g is compatible with Windows 2003.
    Rod West

  • Problems with Active Directory and Windows 2003

    Hello,
    I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. However, after some time somehow there are problems and Windows users aren't authenticated anymore on the Mac. I've looked at the firewall and there are no denied packets from the Mac. There are two servers in the domain, all clocks are synchronized and domain information is up to date. When I unbind the Mac, I can see the machine account being deleted on both domain servers and created too on both machines when I bind to the domain.
    Problems occur when I try login in using ssh or samba do I think this is a problem with the AD module.
    I turned on debugging messages on DirectoryServices:
    sudo killall -USR1 DirectoryService
    When in Windows, using the Administrator user I try:
    net use \\10.0.0.1 /user:domain\Administrator
    Where 10.0.0.1 is the Mac.
    In the Mac I get from
    tail -f /Library/Logs/DirectoryService/DirectoryService.debug.log |grep ADPlug
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling OpenDirNode
    2007-06-27 10:48:38 CDT - ADPlugin: Opening Specific Node domain.com.mx
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling CloseDirNode
    2007-06-27 10:48:42 CDT - ADPlugin: Calling OpenDirNode
    2007-06-27 10:48:43 CDT - ADPlugin: Opening Specific Node domain.com.mx
    2007-06-27 10:48:43 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Calling GetRecordList Routine
    2007-06-27 10:48:43 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:43 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:43 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:43 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:43 CDT - ADPlugin: Calling CloseDirNode
    I really don't know what to do. The Windows Event log shows no messages. The link used to work and there have been no changes in the domain servers.
    The key line seems to be:
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    But I don't know what that ADSEngine.mm is.
    XServe G5   Mac OS X (10.4.9)  

    Hello.
    Thanks for your reply.
    I tried the net use with a drive letter with and without the /user switch. When I use a domain user domain\user1 I can't connect. When I use a user local to the XServe it works.
    When I use
    net use x: \\10.0.0.1\share /user:domain\user1
    I get prompted for a password, but it doesn't work.
    I checked the firewall and all packets to or from the mac are accepted, no denied or dropped packages.
    I already went through the MS document on fw ports. Before I opened to Kerberos ports the binding failed. No the binding work OK.
    Some users who were authenticated yesterday still can access files using the Windows domain accounts. It's new users trying to connect those who have problems.
    This is what the Samba log.smbd log shows:
    [2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2007/07/04 14:58:46, 0] /SourceCache/samba/samba-100.7/samba/source/auth/authutil.c:make_server_infoinfo3(1138)
    makeserver_infoinfo3: pdbinitsam failed!
    [2007/07/04 14:58:46, 0] pdbods.c:odssamgetsampwnam(2329)
    odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'user1'!
    [2007/07/04 14:58:46, 2] /SourceCache/samba/samba-100.7/samba/source/auth/auth.c:checkntlmpassword(367)
    checkntlmpassword: Authentication for user [user1] -> [user1] FAILED with error NTSTATUS_NO_SUCHUSER
    This is what the DS log shows:
    2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Calling GetRecordList Routine
    2007-07-04 14:58:46 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-07-04 14:58:46 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-07-04 14:58:46 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=user1)(sAMAccountName=user1)(displayName=user1)( mail=user1)(userPrincipalName=user1)(userPrincipalName=user1@*)))
    2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-07-04 14:58:46 CDT - ADPlugin: Returning 0 Results
    2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Put 0 records in Buffer for RecordList
    XServe G5   Mac OS X (10.4.9)  

  • Developer 6i Installation with Oracle 8i on Windows 2000 Server

    Hi Folks,
         We are using Oracle 8i (8.1.7) with Developer 6i for the past 2-3 years. Oracle 8i is installed on Windows 2000 Server and the client machines have Developer 6i installed. Using the Net 8 Easy Configuration Utility, the clients and the server are linked perfectly and we have never experienced any major issue regarding the connectivity from the client’s sides.
         Now my question is that, is there any possibility that we can also install Developer 6i on the server, ‘cause we have tried this several times and every time after installing Developer 6i on the server, the Net 8 Easy Configuration Utility does not invokes and obviously we are unable to use any of the Developer 6i products and moreover after installing Developer the already installed 8i Database does not gets mounted and we are also unable to use the database.
         Are we missing some basic stuff here or do we need to run some patch for Windows 2000 Server?
         Another thing, all our forms and reports are residing on client’s hard disks; can we also have the option that the forms and reports should also reside on the server so that we can easily update our forms and reports definitions from the server side?
    TIA
    Hassan

    Hi,
    Yeah, I installed both the products i.e, database and developer in separate directories.
    Hassan

Maybe you are looking for