CRM 5.0 not booting up after IP Address change to Static

Hi Experts:
I really hope that you can help me out with this.
We had/have a CRM 5.0 system, we changed its IP from Dynamic to Static (that went fine).  We rebooted the system up (that also went fine)
The next morning we noticed that some of the processes were showing red (in SAP MMC).  We waited on that hoping that it would resolve it self. 
HOwever, till early evening, the system was still showing red processes.  So, we decided to reboot the system up.  HOwever, the dispatcher is not starting up.  Essentially none of the java applications (SDM, Dispatcher, and Server) are starting up. 
I have opened up a ticket with SAP, and they beleive that the issue is with Oracle Listener as that is refusing to recognize the SID from our SAP system.
Since then I have turned off the static IP and tried restarting the CI, but still it continues to give the same error.
During the Disp+Work.exe start up protocol...it continues to show "J2EE status info unavailable". 
Have any of you encountered something like this in regards to NetWeaver 2004s or anyother SAP application.
Any help would be appreciated.....
Imran

HI Shaun:
Thanks for your reply, however it is still giving the same error.  As requested I am attaching the trace file:
Again..I really appreciate this.
trc file: "dev_disp", trc level: 1, release: "700"
sysno      02
sid        CRM
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    48
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2584
Tue May 23 14:32:51 2006
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 2584) [dpxxdisp.c   1231]
     shared lib "dw_xml.dll" version 48 successfully loaded
     shared lib "dw_xtc.dll" version 48 successfully loaded
     shared lib "dw_stl.dll" version 48 successfully loaded
     shared lib "dw_gui.dll" version 48 successfully loaded
rdisp/softcancel_sequence :  -> 0,5,-1
use internal message server connection to port 3902
Tue May 23 14:32:56 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >TWATSCRM1001_CRM_02                     <
DpShMCreate: sizeof(wp_adm)          14080     (1408)
DpShMCreate: sizeof(tm_adm)          3954072     (19672)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=2000/8/160056/160064
DpShMCreate: sizeof(file_adm)          160064     (72)
DpShMCreate: sizeof(vmc_adm)          14520     (1452)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05EF0040, size: 4783504)
DpShMCreate: allocated sys_adm at 05EF0040
DpShMCreate: allocated wp_adm at 05EF1E28
DpShMCreate: allocated tm_adm_list at 05EF5528
DpShMCreate: allocated tm_adm at 05EF5558
DpShMCreate: allocated wp_ca_adm at 062BAAF0
DpShMCreate: allocated appc_ca_adm at 062C08B0
DpShMCreate: allocated comm_adm at 062C27F0
DpShMCreate: allocated file_adm at 063436B0
DpShMCreate: allocated vmc_adm_list at 0636A7F0
DpShMCreate: allocated gw_adm at 0636A830
DpShMCreate: allocated vmc_adm at 0636A860
DpShMCreate: allocated ca_info at 0636E118
DpShMCreate: allocated wall_adm at 0636E120
MBUF state OFF
DpSesCreateTable: created session table at 063F0040 (len=138424)
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
  start = TRUE
  state = STARTED
  pid = 3192
  argv[0] = D:\usr\sap\CRM\DVEBMGS02\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\CRM\DVEBMGS02\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\CRM\SYS\profile\CRM_DVEBMGS02_TWATSCRM1001
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=3927
  argv[5] = -DSAPSYSTEM=02
  argv[6] = -DSAPSYSTEMNAME=CRM
  argv[7] = -DSAPMYNAME=TWATSCRM1001_CRM_02
  argv[8] = -DSAPPROFILE=D:\usr\sap\CRM\SYS\profile\CRM_DVEBMGS02_TWATSCRM1001
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
***LOG Q0K=> DpMsAttach, mscon ( TWATSCRM1001) [dpxxdisp.c   11349]
DpStartStopMsg: send start message (myname is >TWATSCRM1001_CRM_02                     <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 48
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Tue May 23 14:33:00 2006
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1412
     (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:3929) [nixxi.cpp    4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3192)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue May 23 14:33:36 2006
ERROR => W0 (pid 1088) died [dpxxdisp.c   13947]
ERROR => W1 (pid 3392) died [dpxxdisp.c   13947]
ERROR => W2 (pid 3560) died [dpxxdisp.c   13947]
ERROR => W3 (pid 3460) died [dpxxdisp.c   13947]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 3972) died [dpxxdisp.c   13947]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 1052) died [dpxxdisp.c   13947]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 2608) died [dpxxdisp.c   13947]
ERROR => W7 (pid 3636) died [dpxxdisp.c   13947]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W8 (pid 424) died [dpxxdisp.c   13947]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W9 (pid 3356) died [dpxxdisp.c   13947]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:46 2006
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Tue May 23 18:33:46 2006
========================
No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
0 DIA     1088 Ended         no      1   0             0                                                             
1 DIA     3392 Ended         no      1   0             0                                                             
2 DIA     3560 Ended         no      1   0             0                                                             
3 DIA     3460 Ended         no      1   0             0                                                             
4 UPD     3972 Ended         no      1   0             0                                                             
5 ENQ     1052 Ended         no      1   0             0                                                             
6 BTC     2608 Ended         no      1   0             0                                                             
7 BTC     3636 Ended         no      1   0             0                                                             
8 SPO      424 Ended         no      1   0             0                                                             
9 UP2     3356 Ended         no      1   0             0                                                             
Dispatcher Queue Statistics               Tue May 23 18:33:46 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     9,  udp     7 ( 77%),  shm     2 ( 22%)
since last update     total     9,  udp     7 ( 77%),  shm     2 ( 22%)
Dump of tm_adm structure:               Tue May 23 18:33:46 2006
=========================
Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
Workprocess Comm. Area Blocks               Tue May 23 18:33:46 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:51 2006
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >TWATSCRM1001_CRM_02                     < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2340) (SOFT_KILL)
Stop icman
killing process (3380) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives  (PID:2340  HANDLE:1496)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:52 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died  (PID:2340  HANDLE:1496)
wait for end of icman
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:53 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:54 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:55 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:56 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:57 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:58 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:59 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:34:00 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:34:01 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:34:02 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:3380  HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:34:03 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died  (PID:3380  HANDLE:1504)
[DpProcDied] Process died  (PID:3192  HANDLE:1480)
DpStartStopMsg: send stop message (myname is >TWATSCRM1001_CRM_02                     <)
NiIMyHostName: hostname = 'TWATSCRM1001'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11633]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1436 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1436 (pos=3)
SiSelNRemove: removed sock 1436
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/10
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1436
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Em2Cleanup: Cleanup EM2
Eg2Cleanup: Cleanup EG2
Es2Cleanup: Cleanup ES2
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
***LOG Q05=> DpHalt, DPStop ( 2584) [dpxxdisp.c   10022]
Good Bye .....

Similar Messages

  • Macbook will not boot up after running Software Update

    My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
    I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
    I cannot get an appointment at my Apple Store before Monday.
    Any suggestions?

    Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
    This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

  • Ipad mini will not boot up after charging

    ipad mini will not boot up after charging

    Hi luckysue,
    If your iPod mini isn't booting up or responding after charging, you may find the troubleshooting steps outlined in the following articles helpful:
    Reset your iPod - Apple Support
    iPod only shows an Apple logo and doesn't start up - Apple Support
    Regards,
    - Brenden

  • Windows xp will not boot up after installation of desktop software 4.3.

    windows xp will not boot up after installation of desktop software 4.3.  Where do I start to get my p.c. going again ???

    I get the message that a recent hardware or software change might have caused this.
    The computer does not boot up in safe mode or last known good configuration.
    I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

  • Imac has white screen and spinning wheel and will not boot up---after lion install

    imac has white screen and spinning wheel and will not boot up---after lion install

    Please read Gray screen appears during startup.

  • 16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What

    16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What happened?what do I do now??????? Help!

    Note that you don't have a Mac Pro as stated. Your profile says you have a MacBook Pro. Please clarify as they are entirely different computers. If nothing below works for you, then make a Genius Appointment and take it in for service.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Cisco 7941G phones will not boot up after factory reset.

    Cisco 7941G phones will not boot up after factory reset.
    The following happens.
    1. Speaker light lit (Green)
    2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
    3. Saw Cisco logo with a Java Powered page.
    4. The whole thing loops again and again...
    I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
    Please help.

    How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
    Sounds like too many devices trying to use TFTP at once.

  • Has anyone's screen go blank and not boot up after installing the new yosemite OS

    has anyone's screen go blank and not boot up after installing the new yosemite OS

    Hi Mofimac,
    Thanks for visiting Apple Support Communities.
    If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
    Mac OS X: Gray screen appears during startup
    I recommend going through these first three sections first:
    Disconnect, test peripheral devices and network cables
    Perform a Safe Boot
    Reset the NVRAM / PRAM
    Best Regards,
    Jeremy

  • R12-oafm, forms and oacore not starting up after IP adress change

    Heloo my friend;
    I had problem while i changed my server IP...when i start adstrtall.sh script its end wiht :
    adstrtal.sh: Exiting with status 3 and adoafmctl.sh: exiting with status 204 ...soo my login page doesnt come to explorer and it gives HTTP 404 page not found error
    So here is the solution:
    Cause
    The OC4J lock files contains the IP adress, after the ip adress change the lock files includes the wrong Ip adress which caused the OJ4J to fail
    Solution
    1 - open a new shell and set your apps environment
    2 - cd $ADMIN_SCRIPTS_HOME
    3 - adopmnctl.sh stop
    4 - check if it is really down: ps -ef grep grep opm
    5 - delete the following:
    rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/*
    rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
    rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
    6 - adopmnctl.sh start
    7 - check if the issue has been resolved: adapcctl.sh status
    I hope its helpful
    Helios

    Helios,
    Thanks for sharing this, but please note that sharing the contents of Metalink notes is illegal. Instead, point to the Note ID or give a hint.
    Note: 412980.1 - oafm,forms and oacore not starting up after IP adress change
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412980.1

  • Computer will not boot up after recent software install

    I recently tried to install a series of software updates. Not all were successful. Soon therafter the computer froze up while in safari. I turned it off and the computer would not boot up on restart, and instead sent me to the darwin login screen. I rebooted in safe mode per these forums, and turned off an itunes startup function, and then rebooted. That seemed to do the trick as I could now get back into the OS, but the computer was dreadfully slow. It froze up again in Safari and I turned it off again, and this time it would not go past the grey startup screen with the apple. I tried safe mode again, but the computer would shut down around 30 seconds after the wheel below the grey apple started turning. I Was able to get my Tiger Install DVD in the drive, and turned the computer back on, but now just get the grey apple screen and the wheel spinning indefinitely. I cannot do an erase and install because my photos are not backed up. Please help!
    Thanks

    Hi, Deaton41. Welcome to the Discussions.
    You wrote: "I recently tried to install a series of software updates. Not all were successful."I suspect the only way you are going to resolve this is by performing an Archive and Install. For important tips on this process, see my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order. If you follow my FAQ's steps to the letter, then your photos should be AOK, assuming directory corruption hasn't damaged them. I suspect directory corruption is the root cause of the unsuccessful software updates, which that then led to your current problem re: start up.
    Before installing future software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Satellite M30-107 does not boot correctly after Recovery disk usage

    Hi
    I've recently got hold of a second hand toshiba Satellite M30-107 laptop, and decided to freshen it up.
    I used the toshiba recovery disk, but after doing so the laptop no longer loads windows.
    When turned on it shows the Toshiba start up disk for about a second then goes to a blank screen and freezes.
    When turned off and on again a screen comes up reporting an error in shutting down and gives the options to start in safe mode etc. but choosing any of the options causes the machine to freeze.
    Any help or advice would be much appreciated.
    Thanks
    jt

    Hi
    Sounds a little bit like the notebook does not boot due to the Windows software issue
    Did you recover the M30 with the original Toshiba recovery CD which was supplied with this M30 unit?
    Maybe Im wrong but for me it looks like a wrong recovery CD was used and an image with non compatible drivers was installed
    You could try to install the OS from original Microsoft Win XP CD and could check if it would be possible to get the notebook ruining using clean OS.
    In such case we ( you and me ;) ) could find out if this issue could be related to the software or hardware.
    Bye

  • MacBook Pro not booting up after Software Update ('prohibited' symbol)

    Hi there
    I'm having some issues with my (late 2008) MacBook Pro after installing a recent software update: the machine is not booting up, instead displaying the 'prohibited' symbol on the grey bootup screen, thus:
    !http://img828.imageshack.us/img828/7215/photovl.jpg!
    The back story: this morning I ran Software Update and installed the iWork update, the latest security update and the Snow Leopard Graphics Update. This installation apparently went fine, however on the required reboot the computer displayed the above image, and did nothing.
    I booted from the Snow Leopard install DVD, fixed disk permissions and repaired the disc, which Disk Utility claimed was successful; the computer still would not boot.
    I then rebooted from the Snow Leopard DVD and restored from my most recent Time Machine backup (dated a few days ago, before the software update). This, still, did not do the trick.
    As I have never seen this particular issue before, I'm at a loss as to what to try next, partly as I don't really know what the symbol is signifying. Any assistance that can be offered would be very, very useful.
    Cheers in advance!

    Thanks for that, I did go looking for it but couldn't find it.
    Unfortunately, resetting the PRAM and NVRAM didn't work. Will a reinstallation of OS X make a difference, bearing in mind I've already restored from a Time Machine backup? (I don't know if those clone everything or don't include system files).

  • Lenovo G780 will not boot up after windows update

    My friend's G780 will no longer boot up after installing a windows update, one for which she cant remember, and ever since she updated it, the lenovo boot screen will appear, then turns black, and stays black. It will, occasionally, give her the option to go to the "windows did not boot properly" screen, giving her options to refresh the pc, restore the pc, advanced options, etc. 
    Changing boot priorities, using "repair" did not work, and neither did trying to find a system image.
    She is unsure what to do, and I am as well.
    Any recomendations? 

    hi connorjacob,
    Thanks for Posting!
         If you can try and get the screen again where it gave you options like Refresh PC,  Restore the PC and Advanced option.
          Choose Advanced option to pull up   a new page with options
        With the options, You can try:
    Try Selecting System Restore and see if you can find a restore point prior to to insalling the said updates.
    Select Windows Start up Settings and Find two options that can help
                  - Boot to Safe Mode (See if the computer boots in safe mode)
                  - Last Known good configuration
    Let me know your findings
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • G4 will not boot up after installing latest update

    Just installed latest OS 10 update (10.4.8 or 9?) Mac will not boot up. The ring sounds on start up and the apple shows on video but it never gets to the rotating circle. It has been over an hour. I have restarted twice to no avail. I have also disconnect all peripheral. Do you have any suggestions as to what to do next?

    Hi-
    Welcome to Discussions!
    Try a boot in safe mode (startup holding"shift" key after chime). This will help determine if you have conflicting drivers, fonts,etc. present, and helps bypass damaged software components:
    http://docs.info.apple.com/article.html?artnum=107393
    If successful, run Disk Utility. If not, try a single user boot, and run fsck:
    http://docs.info.apple.com/article.html?artnum=106214
    Alternatively, boot from your OS install disk, and run Disk Utility.
    Post back with your results, please!
    G4 AGP(450)Sawtooth   Mac OS X (10.4.8)   2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

  • Device will not Boot up after a battery pull.

    Hi guys, today is my first time using this website and I also registered today so I am very much NEW here.
    I live in Jamaica and my service provider is Digicel Jamaica. My phone is out of warranty by 6 months now as it was purchased 1.5 years ago from Digicel through my company that I was working for.
    I have a Torch 9860 with OS version 7.1. 
    Two months ago while charging the phone with the charger that was supplied from the manufacturer, i realised that the phone had become very hot and as such  i removed the charger and let it cool via removing the battery cover, at that point i realised that using the keypad to type messages the slightest tap of any letter resulted in that letter either not responding or it would give me multiples of the same letter , which prompted me to tap delete  which would either delete the whole word or sometimes just the letter. at other times, the keypad would work just fine. the battery also did not keep charge for more than a few minutes, and upon inspecting the battery realised it was swollen, as such I had it replaced with one purchased from my Dealer which solved the issue of not holding a charge, but the keypad was still behaving funny as previously explained above.
    My major issue I am now facing is I did a battery Pull anf after replacing the battery, the Phone will not boot up, no blackberry logo with the load bar being displayed, the phone appears to be dead. the battery indicator light is blank even if the charger is connected. This occurred once  about a week ago and after several remove and replacing the battery it finally booted up and worked, but did another battery pull two days ago and it still will not power on.
    Please Help, can you advise me if this is a new issue or what needs to be done. I am thinking as a last option to replace the entire board, but out here in Jamaica, that is a very costly option.
    Thank you for taking the time to review this, any help or guidance or feedback will be greatly appreciated. 

    Hello Jamaikhan
    If this happened to you because your problem is that is nuked stay dead ...
    I can relive through using programs like BBSACK to apply a Wipe
    You must download the OS from your Blackberry 9860.
    Having the Desktop Manager installed on your PC ...
    Regards
    Kudos **Do not forget to give those people who help and advise you regarding your questions, as well give the answer like**
    @ gutijose14
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Maybe you are looking for

  • User Exit and BDC for ME22N

    Hello All, A code has been written in the User exit for Tcode ME22N, Which sets the indicator on PO line item. This has been done by modifying the standard itab POT by using field symbols, because the fields to be modified are shown in display mode i

  • My screen remains white after the apple logo boot up and other questions?

    Does anyone know why this happens? After not using my Macbook Pro for awhile. whenever I'd start it up, it would boot normally (having the Bong sound and the Apple logo appear), but after that happens, the screen would remain white. I have to do a ma

  • Assign an lov dynamically to a text item

    On a form, I have created static lovs LOV2,LOV3. I have text items t1 and t2. Depending on the value of t1, I would like to assign either lov2 or lov3 to t2. Is this possible? I would really appreciate any help. Regards,Suma.

  • Turn Off Animations in Mountain Lion Mail

    Someone, please write a fix this. I need a thoroughbred, not a circus. I write as many as 100 email messages a day. Everyday I check here and on MacUpdate to see if there is a fix for Mail to turn off the bouncing new message window. I can't take it

  • How to insert Glyphs symbol into JTextPane's document

    Hi all, I m creating an application in which i want to insert symbol of "Symbol", "Webdings", "Wingdings" etc's fonts into JtextPane's document. How can i do that? can nebody help me. Its urgent. Thanks in advance, Regards, Danish Shaikh.