CRM 5.2 - Change Work Area Title

Hi Experts,
I wish to change the work area title in the webUI. LIke in search of campaigns, the title comes as "Search: Campaign". I wish to change this to client specific words. In view configuration (BSP_WD_CMPWB), changing this is not available as a possiblity.
KIndly help me finding a way out.
regards,
Ravindra Valy

Hi,
To change the Work Area Title you may have to go to the transaction 'SOTR_EDIT'.
Actually the Title description text is got from the 'GET_STATE_DESCRIPTION' method of the UI Component used.
In this method the OTR(Text repository) might have been used to display the title. Hence, Kindly select the OTR object and use the transaction OTR_EDIT to edit to the required text.
Kindly let me know if you need further details.
Please reward if found useful.
Regards,
Harish P M

Similar Messages

Changing Work Area

Hi ,
I am new to JAVAFX, just going through the documents and samples provided in the site.
Example "IssueTrackingLite" has a single FXML file, based on the selection in the list view(Project1,Project2..) work area content changes.
But if I had a requirement like different project selection should show different layout then how could it be achieved?
Is it possible to create different FXML and based on the project selection can embed that in the content area?
Thank you
Kishan

Hi Danel,
I am experimenting the anchorpane properties to know it better ,
I have created a very template which has AnchorPane,1 SplitPane, 2 text boxes.
It generated the following FXML code,
<?xml version="1.0" encoding="UTF-8"?>
<?import java.lang.*?>
<?import javafx.scene.*?>
<?import javafx.scene.control.*?>
<?import javafx.scene.layout.*?>
<AnchorPane id="AnchorPane1" prefHeight="591.0" prefWidth="359.0000999999975" xmlns:fx="http://javafx.com/fxml" fx:controller="javafxapplicationtest.first">
<children>
<SplitPane dividerPositions="0.5201005025125628" focusTraversable="true" prefHeight="591.0" prefWidth="400.0" AnchorPane.bottomAnchor="0.0" AnchorPane.leftAnchor="0.0" AnchorPane.rightAnchor="0.0" AnchorPane.topAnchor="0.0">
<items>
<AnchorPane minHeight="0.0" minWidth="0.0" prefHeight="160.0" prefWidth="100.0">
<children>
<TextField prefHeight="30.0" prefWidth="139.0" text="left" AnchorPane.bottomAnchor="275.0" AnchorPane.leftAnchor="39.5" AnchorPane.rightAnchor="25.5" AnchorPane.topAnchor="284.0">
<minHeight>
<Long fx:value="20" />
</minHeight>
<minWidth>
<Long fx:value="20" />
</minWidth>
</TextField>
</children>
</AnchorPane>
<AnchorPane minHeight="0.0" minWidth="0.0" prefHeight="160.0" prefWidth="100.0">
<children>
<TextField fx:id="first" layoutX="14.0" layoutY="284.0" text="right">
<minHeight>
<Long fx:value="10" />
</minHeight>
<minWidth>
<Long fx:value="20" />
</minWidth>
<prefHeight>
<Long fx:value="30" />
</prefHeight>
<prefWidth>
<Long fx:value="90" />
</prefWidth>
</TextField>
</children>
</AnchorPane>
</items>
</SplitPane>
</children>
<minWidth>
<Long fx:value="400" />
</minWidth>
</AnchorPane>
I observed few behaviours for which I couldn't figure it out the reason.
In Designer, left Text Box properties "Layout X","Layout Y" are disabled where as right Text Box Layout X,Y are enabled.
If I preview screen in "preview Windows" and try to resize the window then left box is resizing proportionally where as right one is statically located at the same place.
Could you please tell why it is behaving differently?
Best Regards,
Kishan

Benefits - How to change work area?

Hello!
I'm opening an IMG path for benefits. I currently have 2 benefit areas defined in the system (1 is newly created).
The thing is, everytime I click on a subpath, e.g. Define First Program Grouping or Define Second Program Grouping under IMG: PM -> Benefits -> Flexible Admins -> Programs, it always show this message "You are currently working in benefit area XX".
My question is: How to change the work area to another Benefit Area?
Thanks in advance!
Edited by: Yuki C on Aug 15, 2011 2:11 PM
Edited by: Yuki C on Aug 15, 2011 2:11 PM

Problem solved.
Seems like it is reading from memory.
So i just go to some other view where I can select a Benefit Area upon working on it.
So when I go back to the path that I want to work on, now the work area is under the Benefit Area that I want .

Error when trying to copy a work area in Oracle designer

In oracle designer,I tried to copy a work area by selecting.
File-->>Change work area.
Then from the "Work area" pop up window,I selected the new option.
In the Create work area wizard i chose "Copy a work area" and gave the Name ,description and the work area to be copied.
When i click the finish button,I am getting the following error.
"CDR-01005: Workarea compilation failed: ORA-01422: exact fetch returns more than requested number of rows. "
Please let me know how to copy a work area in Oracle designer.
Thanks in advance.

Note 277801.1
Views Return Records From The Wastebasket.
Possible Symptoms
~~~~~~~~~~~~~~~~~
1) executing a SELECT FROM CI_... views return more rows than expected.
2) SELECT ... INTO ... FROM CI_... views raises error
ORA-1422: exact fetch returns more than requested number of rows.
3) Deleting an object from the repository fails with the following errors:
RME-00020: Internal API error -
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "<repos_owner>.JR_NAME", line 3680
ORA-06512: at "<repos_owner>.JR_NAME", line 4138
ORA-06512: at "<repos_owner>.JR_ERROR", line 193
ORA-06512: at "<repos_owner>.SDD_TAB_D", line 961
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-04088: error during execution of trigger '<repos_owner>.SDD_TAB_D'
NB: the name of the trigger (SDD_TAB_D in the above example) will vary
depending on the object type you are deleting
4) Compilation of a Workarea fails with the following errors:
CDR-01005: Workarea compilation failed:
ORA-01422: exact fetch returns more than requested number of rows.
Workaround
~~~~~~~~~~
For symptoms 1 and 2, define the context of a workarea before selecting from
the CI_... views:
exec jr_context.set_workarea ('<Workarea Name>');
For the other symptoms, the errors are caused by RDBMS bugs that were fixed
in the last patch set releases of databases.
We recommend that you upgrade to a version of the database that is certified
with the release of Designer that you are using.
See Note 60705.1 for details

Change Background Color Of Work Area

I am a user of Acrobat 8 Professional and just loaded Acrobat
9 Professional. Does anyone know if you can change the background
color of the work area (documentation pane and navigation pane ).
When I view a PDF the document is ok but the background color of
the navigation pane and documentation is black.
Is this the new look for Acrobat 9?
Is there a way that I can change the color?
I have searched Acrobat>Help and
Acrobat>Support>Knowledgebase and find nothing.
I would appreciate any help I can get.
Ted

Thank you for your post. These forums are specific to the
Acrobat.com website and its set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Note: The color scheme of Acrobat 9 cannot be changed.

Is it possible to change the CATEGORY TITLE font color and/or size of each tile group in start screen, when the tiles are sorted by CATEGORY?

TIA.

Q. Is it possible to change the CATEGORY TITLE font color and/or size of each tile group in start screen, when the tiles are sorted by CATEGORY?
A. No
Carey Frisch

Can't select/change layers in main work area

Been working with PSE11 for a few months. Yesterday it developed a problem. I can no longer click on the layer in the main work area but have to go to the layer panel to select it. What do I need to do to change this back to where it works like it should??

Something to check:
With the tools panel showing in the bottom of the screen, select the selection tool (arrow). Then look in the bottom tool panel to see if the automatic selection of layers is checked.

Navigation Bar & Work areas not appearing in CRM Webclient User Interface.

Dear all,
We are into SAP CRM 6.0 implementation. I have created a new Business role (ZIC_Agent) copying the standard one IC_Agent
I have assigned default layout profile, role key and the assigned navigation bar profile is ZIC_Agent, which is copied form standard navigation bar profile (IC_Agent).
I have assigned the role to a Org unit in the Organization Model.
But when I try to execute the Webclient UI, it is not showing the Navigation bar and work area in the screen, whereas it is working absolutely fine with another standard business role (Servicepro) which has already been assigned in the system.
I could not understand that, why I am getting this error.
I request you to help me in resolving the issue. Your suggestions will be highly appreciated.
Best regards
Edited by: Raghu Ram on Feb 25, 2009 7:43 AM

Hi Raghu Ram,
To do a quick testing if the business role is working properly, assign it to your user directly in transaction SU01.
Add parameter CRM_UI_PROFILE in SU01 for your user and give your Zbusiness role in the value (all caps).
If this is still not working, check the pfcg role that is assigned to the Business role and regenerate the authorizations. You can do this in transaction PFCG.
This should solve your problem.
Regards,
Padma

Canvas/work area image gets stuck, doesn't show any changes made?

For some reason, if I minimize my Photoshop CS4 window for a few minutes and come back to it the canvas image I was working on is stuck for lack of better words. I change the zoom, doesn't do anything, although it shows at the top that I did in fact zoom to x%. Same for even using the brush to scribble, making layers invisible etc. Basically anything that changes what you see on the main canvas.
The only quickest way I have found to fix this is by dragging the tab of the project I'm working on out to show it in a window then dragging it back into the main working area again. This is clearly frustrating, has this happened to anyone else? Any idea of how to fix this? I couldn't find a single thing about this issue on Google.
The program itself doesn't even say not responding or anything at all, all menus open etc. so Photoshop itself isn't actually frozen, I'm baffled.
I'm running Photoshop CS4 (Extended) on Windows 7 32-bit Ultimate.

Sounds like you need a display driver update.
Go to the web site of the maker of your video card, and download and install their latest driver for your hardware.
That usually fixes this.
If it doesn't try disabling the OpenGL Drawing setting in Edit - Preferences - Performance.
-Noel

No Withholding tax calculated when the work area is changed

Hi All
I have changed the work area in infotype 208 for an employee from OH to IL. Then i ran the payroll, but no withholding tax for IL was calculated. The employee residence area is IN.
Any inputs on why its not calculated ?
Regards
Vamsi

Hello Yogesh,
Thanks for your reply!!!
We have solved the issue.
the issue is really due to after 7.3 Upgradation the RSPC_MONITOR had two more new feilds added
1) UNAME & 2) CHECK_TIME
and this fields doesn't exist in the 7.0 Version so due to this inconsistancy the Structure was failing.
so we have included two new Fields in the structure in the program and in the Customer Exit and working fine now.
With Regards,
PJ.

Render Work Area/Warp Stabilizer Changes Video Duration

Hi everyone,
I'm quite new to Premiere Pro and I have no doubt this question has a simple answer.
I've put in a small video, say 5 seconds into my timeline. I then for example apply the warp stabiliser effect. I think select Sequence - Render Work Area.
But every time I do it, the full video is no longer showing. It's like it has kept the same amount of frames, but because warp stablizer (I'm assuming) has inserted frames to smooth it out, I'm only seeing a fraction of the total clip length.
So video length is still 5 seconds, but I'm now only seeing say, 60% of what was shown before.
Just for further info, I'm using a 720HD 30fps sequence, but the video in question is a 120fps from a GoPro. I wonder if that's causing the issue?
Any help would be greatly appreciated.

Hi Jonathan,
I hope you get a good answer from the gurus at ADOBE on this one. I use ProDADS Mercalli V2+ Stablizer in Cs5.5.2 with 4 cores Xeon processor, i suggest you trial it as I have had no issues with the exception of cutting the clip after stablization, do it befor hand. I was thinking of upgrading to 6.1 ?
Good luck

Is there a way to force for rendering ALL clips in work area?

Is there a way to force for rendering ALL clips in work area? All clips: not only the ones with the red horizontal line indicating that they need rendering! I ask for this because the rendered clips preview very smoothly, but the unrendered ones do not! My source footage (and project) involves Full HD (1920*1080i 25fps).

If a Clip does not need Rendering, it will not be Rendered.
Basically, what Rendering does is to convert the Clips, that do require Rendering, to DV-AVI (SD Projects on a PC). This will yield AVI files in the Media Cache, Render Files, and for playback, PrE will rely on those. If you look in the Render File folder, you will see a bunch of abstractly named files, but those files are now Linked in the PREL (Project file), and will be used by the program for playback.
If one were to remove those Render files, and then Open that Project in PrE, they'd receive a message, "Where is file 04u434ip0ow.AVI?" [Note: that is just an example of the abstract Render file name, and is not the actual name, that one would see.]. One could Ignore those now missing Render files, and where they were used, there would then be red lines over those Clips.
As Steve mentions, the Render files are used only for smoothest playback. As I use DV-AVI files for SD Projects on my PC, I will not need to Render for smoothest playback, until I make changes to the Clips, like overlay Titles, PiP, Effects, etc.. I might never Render the Timeline, even with those additions, but sometimes, I will Render a small segment many times, especially with animated Effects, as I adjust the parameters.
If one is not getting the smoothest playback, then Rendering all files requiring Rendering will usually improve playback greatly.
Good luck, and hope that this makes sense.
Hunt

Transaltion in work item title not working consistently

Hi,
I am seeing a strange behaviour in SAP business workfplace with respect to the work item title (subject line) translation........................
- Some prelimenary info : All work item translations for title (subject) and work item body are completly maintained
- System : SAP ECC 6.0
Problem being faced
1. Workflow is trigerred by an user with English login and this generates a work item to the another users
2. The work item receipent logs in in different langiage say german...................he then starts SBPW to check this work item
3. The title of the work item appears in english while the same title which appears in the work item body also is shown in German (User log on language)..................
4. The user displays (not execute) the work item........................The work item title is shown in in German.
5. The user returns to the inbox and then the work item title changes to German language.........................
Has any one encountered this problem.......................I looked for SAP notes but could not find any note suitable for this..........................
I assume it is more a SBWP bug but want to gather some experience from this group
Thanks
Kiran

Hi,
This may happen due to the problem in language translation. Please maintain the language translation properly then test it agian.
Pleae check the table HRS1206 where OTYPE = 'TS' and OBJID= 99000031 ( task number ) whether the multiple language translation is maintained or not. If not thenyou need to maintain through transaction SE63.
Please visit below link for more details.
http://wiki.sdn.sap.com/wiki/display/ABAP/TranslatingTaskDescriptionusingSE63
Thanks and regards,
SNJY

Delta Download from ISU BP to CRM BP doesn't work

Hi Experts,
We are currently new implementing a CRM7.0 system which is connected to an existing ISU system. We now have an issue about the BP delta download from ISU -> CRM.
Replication Scenario:
ISU BP -> CRM BP, NOT SD Customer -> CRM BP. As ISU is the leading system to create BPs and in ISU a MKK BP will be created first then a SD customer will be generated based on a template. So the change of a BP is via BP transaction for MKK role, not via XD02 SD Customer.
Issue:
The middleware setting is done and initial download from ISU BP -> CRM BP is done and successful. However when I trying to change a BP (change a MKK BP via BP transaction) in ISU, the change is not replicated to CRM (no queues, no BDOCs). It seems the delta download is not triggered at all.
However, I have maintained all the settings based on the ISU Specifics on the Set-Up-and-Load Guide for BP. So the followings are maintained:
- ISU: COM_BUPA_CALL_FU maintained based on the Guide
- CRM: CRMC_BUT_CALL_FU maintained based on the note 757955
- CRM: V_SMOFEVOB maintained based on the Guide
- ISU: BTE table (T-code: BF31) maintained based on the Guide
After setting above, the initial load is working (necessary table like CRMCONSUM, CRMRFCPAR etc. are maintained otherwise the initial download won't successful). However, the delta download from ISU BP (MKK) to CRM BP doesn't work.
The only uncertain thing for me is the setting for ISU : CRMC_BUT_CALL_FU. In the Guide only one sentence saying CRMC_BUT_CALL_FU needs to be maintained both in CRM and ISU and details refer to note 757955. However, the note 757955 only talks about FMs for CRM not for ISU/ECC. So in ISU/ECC the table CRMC_BUT_CALL_FU I activated for the following entries:
BPOUT BUPA 0100000 COM_BUPA_MWX_CREATE_MAIN
X
BPOUT BUPA 1000000 BUPA_OUTBOUND_MAIN
X
BPOUT BUPA 2000000 BUPA_CREATE_CHANGE_POINTER
X
BPOUT BUPA 3000000 BUPA_OUTBOUND_ALE_MAIN
X
BPOUT BUPX 1000000 MDS_BUPA_OUTBOUND
X
CLEAR BUPA 0100000 COM_BUPA_MWX_CLEAR_FLAGS
X
CLEAR BUPA 1000000 BUPA_OUTBOUND_CLEAR_FLAGS
X
CRMIN BUPA 1000000 BUPA_INBOUND_MAIN_CENTRAL
X
CRMIN BUPA 2000000 ABA_FSBP_INBOUND_MAIN
X
CRMOU BUPA 1000000 BUPA_OUTBOUND_BPS_FILL_CENTRAL X
CRMOU BUPA 1000010 ABA_FSBP_OUTBOUND_BPS_FILL
X
CRMOU BUPA 2000000 ABA_FSBP_OUTBOUND_BPS_FILL
X
MERGE BUPA 1000000 MERGE_BUPA_CENTRAL
X
MERGE BUPA 2000000 MERGE_BUPA_FINSERV
X
MERGE BUPR 1000000 MERGE_BUPR_CENTRAL
X
PXYIN BUPA 1000000 BUPA_INBOUND
X
XIIN BUPA 1000000 ABA_BUPA_MAP_PROXY_TO_DDIC
X
XIIN BUPA 2000000 ABA_FSBP_MAP_PROXY_TO_DDIC
X
XIIN BUPA 2100000 ABA_FSBP_MAP_PROXY_TO_DDIC_1   X
XIIN BUPA 3000000 ABA_FSBP_MAP_PROXY_TO_DDIC_1   X
XIIN BUPR 1000000 ABA_BUPR_MAP_PROXY_TO_DDIC
X
XIOUT BUPA 1000000 ABA_BUPA_MAP_DDIC_TO_PROXY
X
XIOUT BUPA 9000000 ABA_FSBP_MAP_DDIC_TO_PROXY
X
XIOUT BUPA 9000010 ABA_FSBP_MAP_DDIC_TO_PROXY_1   X
XIOUT BUPR 1000000 ABA_BUPR_MAP_DDIC_TO_PROXY
X
Not sure if the above setting is correct or not (some of the setting may not necessary, is that will impact the delta download from ISU to CRM)
Also what's the purpose of maintain two tables in ISU/ECC (COM_BUPA_CALL_FU and CRMC_BUT_CALL_FU)?
Also I have read some notes that the ISU BP -> CRM BP delta download is not triggered by above tables, it is triggered by BADI PARTNET_UPDATE, is this true, a bit confused.
I am looking forward a solution from you experts.
Thanks,
Laurence

Any inputs experts?

SOME FIELDS OF WORK AREA ARE CONVERTED TO ***** AT AT NEW STATEMENT

HELLO
SOME OF THE FIELDS OF WORK AREA ARE CONVERTED INTO *********** AT AT NEW STATEMENT .FIND BELOW THE CODE
*& Report YTEST_OBJECTS7
REPORT YTEST_OBJECTS7.
Program Description
Author.........: Jitendra Dash                                       *
Creation date..: 17/09/2010                                                    *
GAP ID/FS Id...:                                                     *
Transport......:                                                     *
Description u2026..:                                                     *
CHANGE HISTORY u2013 Should be completed in reverse date order           *
Revised by........: <Developer name>                                 *
Change date.......: Date of creation>                                *
CR/Defect No......: <Change Request No>/ <Defect#<xxx>              *
Transport.........: <Request No>                                     *
Description.......: Description about modification                   *
Data Declaration
TYPES: BEGIN OF gx_input,
         NEMI      TYPE EXT_UI,
         DIVISION TYPE SPARTE ,
         DATE      TYPE ERDAT,
         DATE1     TYPE ERDAT,
       END OF gx_input.
TYPES: BEGIN OF gx_input1,
         NEMI      TYPE EXT_UI,
         DIVISION TYPE SPARTE ,
         DATE      TYPE ERDAT,
         DATE1     TYPE ERDAT,
         int_ui    TYPE INT_UI,
         ANlage    type   anlage,
         SERVICE   TYPE SERCODE,
         SERVICEID TYPE SERVICE_PROV,
         SPARTE    TYPE SPARTE,
        END OF gx_input1.
TYPES : BEGIN OF gx_euitrans,
        INT_UI TYPE INT_UI,
        EXT_UI type EXT_UI,
        END OF gx_euitrans.
TYPES : BEGIN OF gx_eservice,
        INT_UI TYPE INT_UI,
        SERVICE TYPE SERCODE,
        SERVICEID TYPE SERVICE_PROV,
        SPARTE    TYPE SPARTE,
        END OF gx_eservice.
TYPES : BEGIN OF gx_inst,
        int_ui TYPE INT_UI,
        ANlage type   anlage,
        END OF gx_inst.
TYPES : BEGIN OF gx_ever,
        ANLAGE TYPE anlage,
        EINZDAT TYPE EINZDAT,
        AUSZDAT TYPE AUSZDAT,
        VERTRAG type VERTRAG,
        vkonto TYPE VKONT_KK,
        END OF gx_ever .
TYPES : BEGIN OF gx_fkkvkp,
        VKONT type VKONT_KK,
        GPART type GPART_KK,
        END OF gx_fkkvkp.
DATA : GIT_INPUT TYPE STANDARD TABLE OF GX_INPUT,
       git_euitrans TYPE STANDARD TABLE OF gx_euitrans,
       git_eservice TYPE STANDARD TABLE OF gx_eservice,
       git_inst TYPE STANDARD TABLE OF gx_inst,
       git_ever TYPE STANDARD TABLE OF gx_ever,
       GIT_INPUT1 TYPE STANDARD TABLE OF GX_INPUT1,
       GIT_fkkvkp TYPE STANDARD TABLE OF GX_fkkvkp,
       WA_INPUT TYPE gx_input,
       wa_euitrans LIKE LINE OF git_euitrans,
       wa_eservice like LINE OF git_eservice,
       WA_inst LIKE LINE OF git_inst,
       wa_ever LIKE LINE OF git_ever,
       wa_INPUT1 like LINE OF git_INPUT1,
       wa_fkkvkp like LINE OF GIT_fkkvkp.
DATA: gv_v_localfile TYPE localfile,
      gv_g_localfile type string,
      gv_g_alocalfile type string,
      gv_g_sender type SERVICE_PROV,
      gv_g_reciever type SERVICE_PROV.
CONSTANTS : GC_AINP TYPE c LENGTH 50 VALUE '/tmp'.
************Selection screen for input *********************
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE t1.
PARAMETERS : p_rad1 RADIOBUTTON GROUP grp DEFAULT 'X' USER-COMMAND chk,
             p_rad2 RADIOBUTTON GROUP grp,
             p_file TYPE file_table-filename MODIF ID m1,
             p_afile TYPE file_table-filename MODIF ID m2.
SELECTION-SCREEN END OF BLOCK b1.
***************Initialization*****************************
INITIALIZATION.
t1 = text-001.
***Selection of Appl ser and Presen ser for I/P file******
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_rad1 = 'X'.
      IF screen-group1 = 'M2'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ELSEIF p_rad2 = 'X'.
      IF screen-group1 = 'M1'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
ENDLOOP.
**F4 help for inputting the Filename from presentation Ser*
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      program_name = sy-repid
      dynpro_number = sy-dynnr
      field_name    = p_file
    CHANGING
      file_name     = gv_v_localfile
    EXCEPTIONS
      mask_too_long = 1
      OTHERS        = 2.
IF sy-subrc = 0.
    MOVE gv_v_localfile TO p_file.
    move gv_v_localfile to gv_g_localfile.
ENDIF.
***F4 help for file on Application Server*******************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_afile.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = GC_AINP
      filemask         = ' '
    IMPORTING
      serverfile       = p_afile
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc = 0.
    move p_afile to gv_g_alocalfile.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
START-OF-SELECTION.
IF p_rad1 = 'X'.
*************Upload file into Itab from pres server*********
    CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
         FILENAME                      = gv_g_localfile
FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = '|'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
       TABLES
         DATA_TAB                      = GIT_INPUT
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSEIF p_rad2 = 'X'.
*************Upload file into Itab from Applic server*********
************file should be ; seperated and not tab seper******
   TRANSLATE gv_g_alocalfile USING '\/'.
   OPEN DATASET gv_g_alocalfile FOR INPUT MESSAGE gv_LC_MESSAGE in TEXT MODE ENCODING DEFAULT.
   IF sy-subrc = 0.
     DO.
       READ DATASET gv_g_alocalfile INTO wa_xls.
       IF sy-subrc IS NOT INITIAL.
         EXIT.
       ELSE.
         APPEND wa_xls TO git_xls.
       ENDIF.
     ENDDO.
   ENDIF.
   close DATASET gv_g_alocalfile.
ENDIF.
SELECT INT_UI EXT_UI from EUITRANS
                       into CORRESPONDING FIELDS OF TABLE git_euitrans
                       for ALL ENTRIES IN GIT_INPUT
                       WHERE ext_ui = GIT_INPUT-NEMI.
SElect INT_UI
         SERVICE
         SERVICEID
         SPARTE    from ESERVICE
                   into CORRESPONDING FIELDS OF TABLE git_eservice
                   FOR ALL ENTRIES IN git_euitrans
                   where INT_UI = git_euitrans-INT_UI .
SELECT INT_UI
         ANLAGE from euiinstln
                into CORRESPONDING FIELDS OF TABLE GIT_INST
                FOR ALL ENTRIES IN git_eservice
                WHERE INT_UI = git_eservice-INT_UI.
LOOP AT git_eservice into wa_eservice.
    READ TABLE git_euitrans into wa_euitrans
                            with KEY int_ui = wa_eservice-int_ui.
    IF SY-SUBRC = 0.
      READ TABLE git_input into wa_input
                           WITH key NEMI = wa_euitrans-EXT_UI.
      IF SY-SUBRC = 0.
        READ TABLE GIT_INST into WA_INST
                                 with key int_ui = wa_eservice-int_ui.
         IF Sy-subrc = 0.
              wa_input1-NEMI = wa_input-NEMI      .
              wa_input1-DIVISION = wa_input-DIVISION.
              wa_input1-DATE = wa_input-DATE.
              wa_input1-DATE1 = wa_input-DATE1.
              wa_input1-int_ui = wa_eservice-int_ui.
              wa_input1-anlage = WA_INST-anlage.
              wa_input1-SERVICE = wa_eservice-service.
              wa_input1-SERVICEID = wa_eservice-serviceid.
              wa_input1-SPARTE = wa_eservice-sparte.
        Append wa_input1 to git_input1.
         ENDIF.
      ENDIF.
    ENDIF.
    clear : wa_eservice,wa_input,WA_INST,wa_euitrans,wa_input1 .
ENDLOOP.
SELECT anlage
         EINZDAT
         AUSZDAT
         VERTRAG
         VKONTO from ever
                 into CORRESPONDING FIELDS OF TABLE git_ever
                 FOR ALL ENTRIES IN git_input1
                 WHERE anlage = git_input1-ANLAGE
                   and EINZDAT = git_input1-DATE
                   or AUSZDAT = git_input1-DATE1.
Select Vkont Gpart from fkkvkp
                     into CORRESPONDING FIELDS OF TABLE git_fkkvkp
                     for ALL ENTRIES IN git_ever
                     where Vkont = git_ever-Vkonto.
LOOP AT git_input1 INTO wa_input1 .
IF wa_input1-SPARTE = 01 .
CASE wa_input1-SERVICE.
WHEN 'FRMP'.
    gv_g_sender = wa_input1-SERVICEID.
WHEN 'LNSP'.
    gv_g_reciever = wa_input1-SERVICEID.
ENDCASE.
ELSEIF wa_input1-SPARTE = 02 .
CASE wa_input1-SERVICE.
WHEN 'FRO'.
    gv_g_sender = wa_input1-SERVICEID.
WHEN 'DB'.
    gv_g_reciever = wa_input1-SERVICEID.
ENDCASE.
ENDIF.
data : int_ui TYPE INT_UI.
*int_ui = wa_input1-int_ui .
AT NEW int_ui .
READ TABLE git_ever into wa_ever with key anlage = wa_input1-anlage.
READ TABLE git_fkkvkp INTO wa_fkkvkp with key Vkont = wa_ever-Vkonto.
CALL FUNCTION 'ZIN_COMEV_CUSTDETAILNOTIF_OUT'
EXPORTING
    Y_SENDER              = gv_g_sender
    Y_RECEIVER            = gv_g_reciever
    Y_PARTNER             = wa_fkkvkp-gpart
    Y_BASIC_PROCESS       = 'ZCDNO'
Y_SWITCHNUM           =
Y_SEN_LOAD            =
    Y_INTUI               = wa_input1-int_ui
Y_TRANSACTIONID       =
    Y_DATE                = wa_input1-DATE
IMPORTING
X_TASK_ID             =
TABLES
   IDOC_STATUS           =
   IDOC_CONTRL           =
   XYT_ERROR             =
EXCEPTIONS
GENERAL_FAULT         = 1
NOT_FOUND             = 2
OTHERS                = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDAT.
ENDLOOP.
IN THIS PROGRAM AT AT NEW STATEMENT IN LOOP SOME OF THE FIELDS OF wa_input1 IS CONVERTED TO ***** E.G wa_input1-anlage.
pLEASE HELP ME OUT

HELLO
My Q is some fields at AT NEW statement turns into *****.Please help me out
TYPES: BEGIN OF gx_input1,
         NEMI      TYPE EXT_UI,
         DIVISION TYPE SPARTE ,
         DATE      TYPE ERDAT,
         DATE1     TYPE ERDAT,
         int_ui    TYPE INT_UI,
         ANlage    type   anlage,
         SERVICE   TYPE SERCODE,
         SERVICEID TYPE SERVICE_PROV,
         SPARTE    TYPE SPARTE,
        END OF gx_input1.
GIT_INPUT1 TYPE gx_input1.
LOOP AT git_input1 INTO wa_input1 .
AT NEW int_ui .----
>hERE FIELDS OF wa_input1 ARE TURNED INTO *
EX: wa_input1-ANLAGE =******** AFTER AT IN COMMAND.
END AT
eNDLOOP

CRM 5.2 - Change Work Area Title

Similar Messages

Maybe you are looking for