CRM 7.0 IDES Supplement Error

We have installed CRM IDES 7.0.
When we try to supplement Russian Language we have Runtime Errors         DATA_UC_STRUCT_C_LENGTH
Error analysis
    In Unicode-compatible programs, the offset and length specifications
    for structures are limited to the length of the character-type initial
    part.
    In this case, the length specification 176 for the structure "<WA>"
    exceeds the length of the character-type initial part (=70).
Information on where terminated
    Termination occurred in the ABAP program "CL_CTS_LANGUAGE_SUPPLEMENT====CP" -
     in "REFILL_TABLE".
    The main program was "RSTLAN_SUPPLEMENT ".
    In the source code you have the termination point in line 228
    of the (Include) program "CL_CTS_LANGUAGE_SUPPLEMENT====CM008".
    The program "CL_CTS_LANGUAGE_SUPPLEMENT====CP" was started as a background job.
    Job Name....... "SAP-LANGUAGE-SUP RU"
    Job Initiator.. "SAPADMIN"
    Job Number..... 18531300
We don't find information about this problem on service.sap.com/notes.

Please, follow the SAP NOTES 1130387 and 1294109, and download the package to the adequated level due to your version.

Similar Messages

Satellite Pro A10 fails to boot - IDE #0 ERROR

On starting I get the Toshiba start-up screen and there is a regular clicking from the HDD. After 20-30 seconds I get:
IDE #0 ERROR
then a pause, followed by the following codes from the boot agent (Intel FE v4.1.09)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting Intel Boot Agent
Insert system disc in drive.
I have a nasty feeling that the HDD has died. I can replace it if required, but is there any way of extracting the files from it before I go this far?

Thats a clear symptom of a HDD fault.
The +IDE#0+ error means that the BIOS didnt recognize the HDD (due to a hardware fault probably) and cannot boot from the HDD.
Then it swishes to the further boot possibility > LAN
The +PXE-E61: Media test failure, check cable+ error appears because the notebook cannot boot from LAN.
I think you should simply replace the HDD and then you should reinstall the OS again.
This helps for sure.

Satellite Pro A10: IDE#1 Error - drive appears only if CD is inserted

Hi,
I was recently laying on my bed watching a DVD when I fell asleep with the laptop sat next me on my bed. During the night however I moved and accidently knocked it off the side of my bed.
The next day when I booted it up on loading it said IDE#1 Error which I have since come to understand is a CD/DVD drive error, The unit itself works fine, boots up ok (except the IDE error), and I can use it as normal except that there is no DVD drive in 'My computer' which is a bit of a pain when I want to watch a film/play a game or install something.
The drive itself is totally unresponsive, when I press the eject button the tray it doesn't do a thing.
I decided to try and remove and re-seat the drive to see if it was just knocked loose when it fell off the bed as it only fell a short way (about an 18" drop.)
I removed all the covers on the bottom of the laptop and checked that everything was seated correctly and to try and figure out how to remove the drive but didn't want to get too adventurous as to make the situation worse, the only thing i did do is remove the CPU fan and remove some fluff and remove the HDD and had a look to make sure it wasn't damaged in anywhere (it wasn't) and then replaced it and replaced all the covers.
When I rebooted the system it booted up fine as usual and the drive responds when I press the eject button, but the DVD drive is now (sometimes) displayed in 'My computer' but only when I insert something (be it a DVD/Game/Program) and then it displays an error message stating there is an I/O error on the device.
Any help from you all would be a great help, I was thinking of just removing the drive and replacing it with a new one such as a DVD RW one but I don't know how so I would be very grateful for any advice/guidance you could provide.
Many Thanks,
Michael

Hi Michael,
It is possible that reseating your optical drive may be necessary to return it to full functionality. Unfortunately on the A10 this will involve some dismantling in order to reach its securing screw which is underneath the keyboard.
Please check the following link for full dismantling instructions. The DVD drive is covered in step 13. http://www.irisvista.com/tech/laptops/ToshibaA15/SatelliteA15_laptop_disassembly_1.htm
regards

Satellite Pro A10 - IDE 1# Error on boot up

HI there, i have a Satellite pro A10 and all has been working fine for the last few years until now.
A few days ago i started getting an error reading cd's / dvd's invalid disc format yet the discs work fine on every other pc.
Today i am getting IDE#1 error on boot up... the laptop is still standard from when i got it off the shelf. thinking the drive may have died due to wear and tear i replaced the drive with a working drive and i still get the same error. I have removed the ODD altogether and its still coming up.
I have also updated the bios from usb floppy which was successful. and the best part of all this. the dvd rom that came with the laptop works fine in my other tosh a10!!!!!!
Anyone got any ideas. i don really want to replace the main board if i can help it. this is the only issue with the laptop.
thx in advance people.

Hello James
IDE 1# Error is typical when ODD is not accepted by the system. The reason for that can be defective drive or usage of non-compatible drives. The fact is that every drive can not be used with every notebook model because of different pin assignment.
In your case it is really strange that drive work on other A10 but not on this one. Because of that I presume there is maybe some problem with connectors. I am afraid there is not much to do. You can try to check them and see if they are clean and not oxidized.
Sorry but we can only speculate what the problem can be but, like you know, only intensive test can give you more answers.
Good luck and pleas let us know if you will find out what the problem is.

IDE #0 Error on Satellite Pro A10

We have a Sat Pro A10 which shows the following errpr on boot; IDE #0 Error.
The bios is not showing a hard drive.
Have tried a new hard drive, same error

Hello
This error is definitely because of HDD. If there is no success with new HDD it must be problem with contacts or with HDD controller on the mainboard.
Please contact your local dealer or Toshiba ASP directly. I really don't believe that you can do anything alone.

IDE #1 Error on Satellite Pro A10

Hi, My Satellite Pro A10 laptop displays IDE #1 Error everytime I attempt to put it on. That message is all I get, although it is displayed for a short time- the laptop always comes back to that message, it attempts to load the screen just go's blanbk and then that message comes up everytime! I was wondering if anyone could explain what this means and how do i fix it?
thank you
david

Hi
This is very strange that this error message appears and you have not changed the drive.
Did you try to 'flash' the drive or to install any firmware or update the BIOS?
I ask it because I can't believe that this error message appears without any reasons.
Like Jack and Silas say, this error appears because of no compatibility of the drive.
The unit was delivered with compatible drive and should works. I assume the BIOS cannot recognize the drive at this time because it's dead.
In my opinion you have to replace the drive. (try to check it it's possibel to install/to boot Toshiba recovery CD)
Ps: Just for info: I have read in the net that sometimes it's possible to flash the drive with any illegal software to change the master/slave settings but this is not advisable. But I have never tried it.
I have also read in the forum that if this error message appears every time and it's not possible to use the drive and the BIOS cannot recognize this device so the connection of pin 45 and 47 could solve this issue sometimes.
Check this topics:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5457&messageID=18649
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=7005&messageID=24482

Error in Action when CRM Order is updated as Error from R/3 update

Hi,
Currently we are in CRM 6.0 SP04 and R/3 4.7 SP14
Process:
1) B2B user places order through ISA
2) Order gets replicated R/3 from CRM through middleware (Scenario A setting)
3) If there are any changes in order on either side, changes gets replicated.
Requirement:
We have a requirement from business to trigger workflow in CRM if order is in error. Following are the possible scenarios
1) Error while saving order in CRM
2) No errors in CRM. However, Order will get error in R/3 because of inconsistent configuration or master data between CRM and R/3. The BDOC will be green while replicating to R/3 and acknowledgement to CRM.
3) BDOC status is in error
Solution approach:
We created an action to trigger event when order status set to "Contains error". The condition for Action trigger are Order have error free flag NE X(BUS 2000115 ) OR Status = I1030 OR status = I1056.
Issues:
1) Scenario : Order is successfully create in CRM without any error. Order gets replicated to R/3 u2013 BDOC is green. However, the order gets error status in R/3 because of inconsistent configuration or master data. The acknowledgement BDOC updates the error status in CRM. However, Action does not get trigger when the order is updated as Error from R/3.
Pls advise possible solution and also suggest any other way to achieve the required functionality to generate workflow for CRM order updated as Error from R/3.
Regards,
Anil Rithe

Hi Anil,
Try this, implement ORDER_SAVE BAdI. This BAdI is triggered every time an order is saved, you could put in your logic to see if the order has errors, if yes trigger your workflow.
I haven't tested but this should work for your case when the crm order is set to error status after the replication to R/3(the BDOC scenario).
This may not be the most efficient method of doing, but this would definitely work.
Make sure you use proper checks at the beginning of your order_save BAdI implementation as this badi would get executed on save of every 1-order object.
~Kiran

Satellite A25-s3072 and LG GWA-4082N DVD - IDE #1 error

Hi,
i just bought GWA-4082N DVD, firmware CS01. It doesn't want to work
with my laptop, Toshiba Satellite A25 ( Win XP SP2, latest available
bios v1.4). After turning it on, "IDE #1 error" appears, and windows
boots without DVD. And it does not appear in Device Manager.
I find a way to make it show up in windows by changing in BIOS
"Configuration" part from "All Devices" to "Setup by OS", but this
error still appears. Most probably ( didn't try yet, but people say
this) laptop will not boot from CD in this case. Also, laptop does not
show DVD if i don't open/close the tray during Windows loading! It
flashes the light on the BIOS loading stage, but disappear whn Windows starts to load...
DVD is set to Master by connecting 2 pins (45 & 47), as it was recommended
in some forums, but it does not resolve the issue.
Also, putting a paper to isolate 45-47 pins to make it Slave does not help either
(DVD is not shown in the Device Manager).
Is there a program (csel-changer) to change Master/Slave mode available?
I try also to reflash it with HV02 firmware from TDB page ( i understand
that this is for Toshiba laptops specifically , originally DVD came
with CS01 firmware). "IDE #1 error" still here.
Question is - are there any suggestions , how to make it works on BIOS level
with my laptop ? I need CD booting and hate IDE #1 error.
Is there any firmware specifically for Toshiba laps, for this DVD, which allow BIOS to recognize it?
Please, if you have GWA -4082N DVD working with your laptop, let me know what is a firmware version?
DVDinfo or Nero InfoTool can help to find it out.
Thanks in advance for any suggestions...

Hi,
thanks a lot for answers!
> This occurs if there is different pin assignment on
> the notebook and the drive. Because of that the
> notebook and the drive can not ??communicate?? and
> drive is not recognized correctly by BIOS.
Well, pin assignment _should_ be the same. I think it's a standard.
People with the same problem fixed it completely by connecting pins 45-47,
or by using csel-switch programs (available for NEC for example, but not LG).
> It is always best option to replace the drive with the same one.
I was looking for DVD burner, my present drive is Combo, but i need to write DVD.
> Next time before you do something like that be
> careful and pick up all possible information.
Yes, i definitely will look for all possible sources :)
Problem is that this drive is new, probably not many users had it.
Or they were lucky with other brands of laptops.
As far as i saw, people managed to fix the problem with new DVD by connecting pins, change firmware, etc.
Unfortunately this is not my case :-(
BTW, i bought this laptop 3 years ago, so new compatible models of DVD will not be in the list (in manual),
and that models that are in the list are old, or even not supported any more :-\
Interesting thing is that i forced this drive to work (read, record, etc) by changing in BIOS
"Configuration" part from "All Devices" to "Setup by OS", so most probably pins are the same, but something
in the BIOS does not work properly , so no CD booting available.

Satellite A50-512 PSA50E - IDE #0 ERROR

SATELLITE SA50-512 It does'nt detect any harddrive.
In Acpi bios V. 1.20 i get the msg.:
DRIVES I/0
BUILT-IN HDD
=NO DRIVE
CD-ROM =SECONDARY IDE(170H/IRQ15)
And in dos the msg.:
IDE #0 ERROR
It is NOT hdd problem, because i have tried 3 other harddrives from Toshiba with same rpm and cap. and 2 other in the store without any luck.(All harddrives working perfectly on other laptops
It is a very old Pc and therefor i do not have any recovery cd for it either.
It has no Fdd so updating bios with Cd was unsuccessful.(couldnt make diskett from Bios-update file "P0015v140" in other computer either)
I have tried everything i could find on google in over 3 weeks without any luck.
So wondering if there is a way to fix this....
Thanks

Thats really strange
Looks like the notebook is muddled up completely
On the Toshiba European driver page (in Archive area) the BIOS 1.40-Win version has been published.
But its a win based version and can be upgraded only from running Windows system.
In my opinion the technician should check the hardware parts (HDD controller, motherboard) maybe the guys would be able to update the BIOS using an special BIOS version

CRM b2b IC_CRM gives communication error

Hi Guys,
CRM_IC tcode on crm 2007 gives the below error,have configured fully qualified hostname , and J2EE service is running. i have checke dthe settings in smicm . the too look fine.
Appreciate Any help .
Error when processing your request
What has happened?
The URL http://socw3s1er65.solnet.com:8000/sap/bc/bsp/sap/ic_base/main.htm was not called due to an error.
Note
The following error text was processed in the system CR5 : Exception condition "COMMUNICATION_ERROR" raised.
The error occurred on the application server SOCW3S1ER65_CR5_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CREATE_SESSION of program CL_SAM_BSP_SESSION_LAUNCHER===CP
Method: START_WORKER_SESSION of program CL_ICWC_SESSION_REGISTRY======CP
Method: ONCREATE of program CLO23UTXK1DHIM8WX0QZD2TBW2KZ9CP
Method: %_ONCREATE of program CL_O23UTXK1DHIM8WX0QZD2TBW2KZ9CP
Method: DO_INIT of program CL_BSP_PAGE===================CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP

Hello Prasanna,
Actually, the CRM Interaction Center does not have any J2EE components since CRM 4.0. CRM 2007, CRM 2006s, and CRM 2005 are fully ABAP based with no need for any J2EE components.
Also, transaction CRM_IC is deprecated and no longer supported in CRM 2007. The Interaction Center is now started via the CRM WebClient (BSP application "CRM_UI_FRAME").
Warm regards,
John

IDE #1 ERROR on start up Satellite Pro Series 2100

Hi... I am getting a IDE #1 ERROR displayed on starting the computer. My CD/DVD drive doesn't seem to be recognised (In Device Manager the drive is not shown) and certainly doesn't work at all. I have not installed a new CD/Drive drive, it's the original factory supplied.
Also, another clue is when I press any of the dvd control buttons on front panel the following pop-up window appears:
"The drive setting in Toshiba controls is wrong. so the audio/video control buttons won't work.Please select the correct drive letter.for the internal CD/DVD drive"
However on the drop-down box there is no drive letter to select!
Any help would be gratefully receieved. Many thanks, Matt

HI Matt,
it seems that your IDE Controller is damaged. For playing safe you should recover the notebook with the Toshiba recovery Image and if the failure occures on a fresh new system, the IDE controller is bad!
It could be possible that only the IDE cable is loose, but to kow that it would be better to bring the notebook to a Toshiba Service Partner!
Bye daniel

Satellite Pro 4290: How to solve the IDE #1 error issue

I have recently aquired a DVD-ROM drive to upgrade my Sat Pro 4290 optical drive from a CD-ROM to DVD-ROM. As suspected I am having the problem that the drive is not recognised and get the IDE #1 error.
I can get windows XP to recognise the drive by deleting the Secondary IDE Channel in the Hardware and then searching for new new hardware. It then installs the IDE Channel and then finds and installs the DVD-ROM and works fine. I reboot the laptop and back to square one!
I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on theh IDE connectors.
I do not want to risk this and was wondering if anybody found an easier way of doing this?
Many Thanks

Hi
> I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on the IDE connectors.
Thats not 100% true. This is not a setting issue on the motherboard but the setting of the CD/DVD drive.
The drive supports different master\slave\c-sel settings and if they are not compatible the BIOS will not recognize the drive correctly.
On the external drives (for desktop PC) its possible to change such settings by switching the jumper but this is not possible to the slim notebooks drives.
The notebook drives settings are stored in the firmware!!
I found different not legal tools which can change the master/slave/c-sel settings but I would not recommend using it.
The risks are too high that the drive will be damage.
So try to replace the drive with a compatible one

Qosmio F10 get the error "IDE #0 ERROR

hello all, just bought the Qosmio F10 installed all things i had to do. installed and registerd the norton anti-virus. everything went good. now few hours later i want to start my notebook and get the error "IDE #0 ERROR"
so i put my dvd recovery disk in, follow the steps. windows xp english, Start installation, recover entire disc, continue...
then i get the error: "error checking for a player partition - please try again! press any key to continue. then i just get: c:\>
thats all i got
any help ?
thx in advance,

Hi Maarten
I suppose that there is some problem with HDD. Obviously the HDD is not recognized by BIOS and it is not possible to access on it.
Please contact your local dealer immediately and explain him the problem.
Bye

HT201210 dose someone has any idea about error 1015 when trying to restore iphone iOS?

Dose someone has any idea about error 1015 when trying to restore iphone iOS?

Error 1015 means the phone was jailbroken. You can not get help here.

Jsp ok but IDE display errors in javascript+tags and taglibs include file

Hi,
The JDev 10.1.3 IDE display errors on running JSP in following cases:
1) When tag libs declaration in include file.
2) When jstl/struts tags are used in javascript
JDev 10.1.2 didn't diplay those errors
More details:
extracts:
Type of error: Character data not allowed in head
alert("Your session has been closed automatically after a long period of inactivity.\nOR\nYou used an invalid or old bookmark.");
javascript comments: (use for debugging)
// alert("agt: "+agt+", is_ie: "+is_ie);
Type of error: element <used tag> not expected here
<fmt:bundle basename="com.photoswing.webview.MainshopAppMessageResources">
alert("<fmt:message key="alert.timeout.noRedirection"/>");
</fmt:bundle>
JDev 10.1.3 has no javascript editor, so it should ignore the content of <script> .. </script>
Regards
Fred

Hi,
Same message but with formatting tags.
Closing tag is [ / code ] without blanks.
Thanks to Didier,
IDE displayed errors => jsp runs and compiles ok.
It is not obvious to reproduce those errors because they vary upon external or internal tag declaration.
Remark:
I tried replacing jsp tag declaration:
<%@ include file="../../helper/TagLibsInclude.jsp"%>by simple file but it doesn't help:
<%@ include file="../../srcInclude/tagLibs.inc"%>Case 1) all tag declaration are external but jstl c and fmt also internal:
<%@ include file="../../helper/TagLibsInclude.jsp"%>
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c"%>
<%@ taglib uri="http://java.sun.com/jstl/fmt" prefix="fmt"%>Element c:out not expected:
=====================
<c:set var="numberOfRows">
<c:out value="${bindings.LoadedPhotos}" />
</c:set>Element logic:messagesPresent not expected
==================================
     </tr>
    <logic:messagesPresent message="true" >
        <html:messages message="true" id="msg">
         <tr>
          <td colspan="5" class="txtMed txtBold">
             <c:out value="${msg}"/><br/>
          </td>
         </tr>
        </html:messages>
    </logic:messagesPresent>
    <tr>Element fmt:param not expected .
========================
              <fmt:message key="event.photoCommentInLang.prompt">
               <fmt:param value="${pageScope.langName1}"/>
              </fmt:message>
..Case 2) all tag declaration are external
Element set not expected .
===================
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<c:set var="sourceId" value="${bindings.EventId.attributeValue}"/>
<c:set var="sourceId1" value="${bindings.AlbumId.attributeValue}"/>
...Element bundle not expected .
======================
</head>
<body>
<fmt:bundle basename="com.photoswing.webview.MainshopAppMessageResources">error: Character data not allowed in head
=============================
Example:
<script language="JavaScript" type="text/javascript">
function FL_init() {
<c:if test="${not empty requestScope.SessionWasInvalid}">
    alert("<fmt:message key="general.loggedIn.timeout"/>");
    location.href="<c:url value="/accountLogin.do"/>";
</c:if>
</script>Regarding my workaround:
You don't have to remove the tag declaration, but I prefer to keep my jsp as clean as possible.
But I found another problem, this time it's a serious one, when you reformat the source ALL tag prefixes are removed.
Example
<c:set ... becomes <setOther example:
<c:set var="numberOfRows">
<c:out value="${bindings.LoadedPhotos}" />
</c:set>becomes:
    <set var="numberOfRows">
     <out value="${bindings.LoadedPhotos}"/>
    </set>Good luck!
Fred

CRM 7.0 IDES Supplement Error

Similar Messages

Maybe you are looking for