CRM 7.0 upgrade ( i5/OS PASE program not found or in use)

Hi,
We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
When I execute this command
   STARTUP    SID(CD3) TYPE(ABAP) RESTART(YES) DVDPATH('/Inst_DVDs/51036889')
        SAPUPLIB(SAPUP) OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
iSeries show this error message in "UPG_A_CD3" job log.
   Message . . . . :   i5/OS PASE program not found or in use. Path name is
       /usr/sap/CD3/upg/STARTUP.
Does anyone has any idea what could be wrong ?
Thank you,
Jack.

Similar Messages

After installing SL: autochk program not found - skipping auto check

My MacBook was setup to dual boot Leopard/Win XP via Boot Camp, but I just formatted the Leopard partition and installed Snow Leopard in its place, which boots wonderfully, but now when I boot Win XP I get this error: "autochk program not found - skipping auto check"
Seconds later the machine automatically reboots.
I booted off the Win XP disk and ran chkdsk /p in the Recovery Console, but the "autochk not found" message still kills the Win XP boot.
Snow Leopard and Win XP are in different partitions on the same drive. I only formatted and reinstalled the Mac OS partition, I did not format or reinstall the Win XP partition.
Help?

I have the same problem. I had decided not to upgrade Parallels from version 3.0 since hardly (or almost never) use windows programs any more. I did want the option of using Boot Camp and Windows if ever needed though.
I installed Snow Leopard knowing that Parallels would no longer work and later did an uninstall. When I tried a restart to open Windows from Boot Camp I got the "autochk not found" message.
Searching around I discovered that Parallels changes the disk table so that the OS can only boot from within Parallels. The problem appears to be a way of changing the disk table back to a setting that will make it boot normally. There is a utility available for doing this on a windows PC, but I've found nothing for the Mac yet.
Without doing a complete re-install of Windows OS, I'm stuck for another solution.
In the end I may just have to erase the drive (the Windows partition) and be done with it for good. What upsets me is that Parallels should have created an uninstall utility that reverted the disk table back to normal boot settings.

Qualifying program not found

Hey there, I'm in New Zealand - When purchasing I selected the apparently cheaper option because I already have Acrobat on 3 of my computers... However, the code supplied gives me a message "Serial number is Valid but Qualifying Program not found" Leaves me thinking I was suckered into selecting the wrong product. I need steps to activate Acrobat on my new W8.1 computer without having to buy a license from scratch. I've already paid $220 NZD, how do I upgrade to what I need and pay the difference...???

Not answered

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

Getting error in XI"RFC Program Not Found"

Hi All,
I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
Thanks
Amit

Hi,
I am calling RFC FM via SAP XI.
Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
Thanks
Amit

When i download a file from the web i get "Anti-Virus Program not found " message. This has been happening since I change anti-virus programs for CA etrust to Sophos. How do I get Firefox to recognise my new Anti-virus program?

every time i download a file from the web (ie. a PDF file) i get "Anti-Virus Program not found " message. This has been happening since I changed anti-virus programs for CA etrust to Sophos. How do I get Firefox to recognise my new Anti-virus program?

That is a very good warning provided by the Download Statusbar extension. Something like that should been built into Firefox. I filed this Bug report a couple of years ago, about the lack of a warning like that. 
https://bugzilla.mozilla.org/show_bug.cgi?id=480855 
I have looked everywhere that I can think of to find a list of '''IOfficeAntiVirus providers''' ''(as mentioned in the Bug report)'' that will work with Firefox, so I can't answer that for you.
You might want to ask the developer of the Download Statusbar extension about it. He might know which AV programs are compatible with the Windows API that Firefox uses for the download scan. 
http://dlstatusbar.proboards.com/index.cgi?

What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What has happened to the iPad 2 finger select and drag technique?
Since upgrading to iOS7 it does not work?
I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback

MSS: Approve working time Program "       " not found error

Hi,
I am able to enter working time and release in ESS. CAT2, CAT4 and CAT6 are also working fine. Im using the Approve Time sheet data iView in MSS to approve working time. Im not sure if I did all the required configuration in IMG Approve working time.But when I click the iView I get a Java exception as shown below. Pl find the ST22 dump also. Can you please let me know
1. What could be the problem.
2.What are minimum configuration to be done in IMG Approve working time.
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Program                                          not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:200)
     at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface$External.onInit(InternalFcCatApproveInterface.java:313)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.hr.cat.approve.vac.dd.VcCatApproveDrillDownList.onInit(VcCatApproveDrillDownList.java:
ST22 dump
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "BUILD_TABLE_STRUCTURE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
Regards
Srini

Starting a new thread

Create_dynamic_table - error "Load program not found"

Hi experts,
i have receive error "Load program not found" at CALL METHOD cl_alv_table_create=>create_dynamic_table
Runtime Error LOAD_PROGRAM_NOT_FOUND
Exception CX_SY_PROGRAM_NOT_FOUND
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FB_TABLE_CREATE_STRING" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
I'm stuck in this annoying problem,,,can anyone help me?

Hi Maroz,
I know this is not best practise to post my question in some others, but i have posted it separately earlier
Dynamic ITAB from Excel
I have created a dynamic ITAB from 1 Row of Excel Sheet
LOOP AT ist_excel INTO w_excel WHERE row = 2. " Contains the Values provided in 2nd row of Excel
 APPEND w_excel TO row1.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 3. " Contains the Values provided in 3rd row of Excel
 APPEND w_excel TO row2.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 4." Contains the Values provided in 4th row of Excel Etc
 APPEND w_excel TO row3.
ENDLOOP.
LOOP AT row1 INTO w_excel.
 CLEAR wa_it_fldcat.
 wa_it_fldcat-fieldname = w_excel-value .
 wa_it_fldcat-datatype = 'C'.
 wa_it_fldcat-inttype = wa_details-type_kind.
 wa_it_fldcat-intlen = 40.
* wa_it_fldcat-decimals = wa_details-decimals.
 APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fldcat
 IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
I followed the Link provided by to create a Dynamic ITAB
Please guide me how to pass these Value from excel to Dynamic Internal Table
Warm Regards
Ramchander

Isdelete program not found - Skipping Autocheck

Hi everyone,
After rejuvenating my T61p (Vista Home Premium) this message pops-up during booting:
"Isdelete program not found - skipping Autocheck"
The message appears for a few seconds and then disappears. Booting continues and I do not notice any other symptom on my system.
Has anyone experienced this same issue or knows what the message is all about?
What program is that "Isdelete" and what are the consequences of this "skipping Autocheck" warning?
How serious is this?
Please help.
Solved!
Go to Solution.

OK, if anyone ever encounters this issue, I found a solution here:
http://forums.techguy.org/windows-vista-7/583755-solved-solved-lsdelete-program-not.html
It "missing" file seems related somehow to Ad-Aware, which I un-installed recently. The first two letters of the program name (LS) seem to stand for "LavaSoft", which is the publisher of Ad-Aware.
The above linked solution seems to have worked for several other people and it certainly worked for me too -- I got rid of that infamous message...

Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Program not found in ECC 6.0 for manual reposting of primary cost

Hi exps,
The program SAPMLK23F1 is not found in Ecc 6.0. the program SAPMK23B is replacing the program.
now this program is using anywhere else or toally removed by sap in ecc6.0?
is any programs which is not in ecc 6 kindly list out for me. points will be awarded.
Raghav
Edited by: Raghav K on Apr 29, 2009 5:20 PM

Not answered

Can't purchase upgrade serial number? - page not found

I am ready to purchase an upgrade serial number, since my Ap3 trial has expired. But when I click on the "buy" button, I am taken to an Apple Store page that reads "page not found" Has anyone else seen this??
Have they removed the ability to purchase a serial number? That's how I upgraded from Ap1 to Ap2, oh so long ago.
Thanks.

To close this out:
I called Apple store support, and they assured me that if I purchased the "upgrade" that an email would be sent containing the serial number, and no hard product would need to be shipped. I questioned the nice clerk several times, but she was +absolutely certain+ that an email would be immediately forthcoming.
So I believed her.
Bad idea. Wrong. No email. No serial number. I have to wait for the shipped disk (which of course I don't need since I have already installed the trial version.)
And of course, the Apple store can't fix this kind of problem. Maybe the "pro store" can help tomorrow.

ISE upgrade failing with "% Manifest file not found in the bundle"

Hello
I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest). It keeps failing with
% Manifest file not found in the bundle
Here is the output:
company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
fusd-ise-01/admin# sh application version ise
Cisco Identity Services Engine
Version      : 1.0.3.377
Build Date   : Fri May 6 19:30:37 2011
Install Date : Wed Oct 12 22:18:26 2011
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS. Thanks in advance.
Saro

Same problem with 1.1.2 and 1.1.1 patch 5:
ISEcdemo/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Copyright (c) 2005-2011 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISEcdemo
Version information of installed applications
Cisco Identity Services Engine
Version      : 1.1.1.268
Build Date   : Mon Jun 25 05:49:23 2012
Install Date : Wed Sep 12 09:12:53 2012
Cisco Identity Services Engine Patch
Version      : 1
Install Date : Wed Sep 12 10:01:22 2012
Cisco Identity Services Engine Patch
Version      : 2
Install Date : Wed Sep 12 13:10:36 2012
Cisco Identity Services Engine Patch
Version      : 3
Install Date : Tue Nov 27 12:33:19 2012
Cisco Identity Services Engine Patch
Version      : 4
Install Date : Tue Nov 27 12:52:50 2012
ISEcdemo/admin# patch install ise-patchbundle-1.1.1.268-5-68046.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
ISEcdemo/admin#
ISEcdemo/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
Can someone verify the downloaded file details? They are different from cisco.com values:
-bash-4.1$ /usr/bin/md5sum.exe /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
2aa9b75ef5d7c1662a1a51844f178b77 */cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-bash-4.1$ /usr/bin/ls -lAp /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-rwx------+ 1 Administrators Domain Users 1583851520 Nov 29 00:14 /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz

I need help installing itunes 10.3. Says installation program not found??

I keep tryin to download/install itunes update. When it gets to install, computer says the program i am trying to use to install this does not contain an itune installation. Pick another program that does!!! Im not computer savvey. I dont know what to do at this point

Download the iTunes installer from:
http://www.apple.com/itunes/download/
Save it on your PC before attempting to install it.
Put the full text of any error message in your next post including error numbers.
If you prefer you can paste an image of the error into you post.
Press alt prtscrn while the focus is in the error message, then use the little camera at the top of the forum editor to insert the image. (I hope alt prtscrn works in XP, I can't test it myself).

CRM 7.0 upgrade ( i5/OS PASE program not found or in use)

Similar Messages

Maybe you are looking for