CRM: Acount Group download

Dear Colleagues,
In R/3, there are 20 acount group(a/c group can be chacked in trx. ovt0). Table name is T077D.
I have downloaded these acount group from R/3 to CRM with inital download of object DNL_CUST_KTOKD. So CRM a/c group table CRMC_T077D gets populated with 20 entries. And then corresponding CDB table SMOT077D also populated with 20 entries.
So far so good. But now I realize that I need only 10 a/c group in CDB table SMOT077D. Rest are unwanted entry, so now how to proceed?
There is a object <b>DNL_CUST_KTOKD1</b> which transfer entries from CRM to CDB, but I am not able to set the filter condition on this object. Also, even if I am setting this filter, this is not going to remove the entries which are already there.
Please suggest...
Rgards
Milind

Hi,
have you tried:
1. Adjust the filter settings for object DNL_CUST_KTOKD (R/3 -> CRM) to your requirements
2. Run the synchronisation R3AS4 for this object --> check whether CRM tables only contains your desired values
3. Run the synchronisation for DNL_CUST_KTOKD1 --> check whether CDB tables are populated correctly
Regads
Wolfgang

Similar Messages

CRM Target Groups and Product Segments - BW and BPS settings

Hi gurus,
I have some questions regarding the CRM Target Groups and Product Segments as it relates to BW and BPS planning layouts.
1. When a target group is created in CRM, is it supposed to also be create master data entry for the object 0TGGRP_ID in BW? If it is, what kind of settings need to be made to ensure that? When we create target groups in our CRM instance, we donu2019t see the master data being updated for the 0TGGRP_ID info object.
2. Where exactly (in BW) is the relationship between the target group and the underlying customer/business partners stored/updated? We have a requirement to use target groups for defining the trade promotions and still being able to explode and plan on (individual) customers in the embedded BPS Planning layout. I believe that we need to have target group and associated customer assignments stored somewhere (?) in BW and use BPS characteristic relationships to populate all the possible combinations for a target group ID being passed from CRM. Am I correct in my assumptions? Any ideas if SAP has already delivered something similar in the BPS business content for TPM?
3. We are planning to use product segments to define the trade promotions as well. I believe BW info object is 0CP_SEGMENT. Similar to what I mentioned in Question 1, I donu2019t see any master data being updated for 0CP_SEGMENT. Am I looking at a wrong BW object or missing some key settings?
4. Where is the relationship between a Product Segment and the associated products stored/updated in BW? How do I create a trade promotion using a product segment and make the BPS planning layout populate individual products in the lead column?
Thank you for your help

Hi Anna,
After reading your post, what i understand is that there is no existing relationship present in CRM system between the Org BP and the contact person BP.
As per my Knowledge in order to create a Target group with Contact Persons you should have an active relationship persent in the CRM system bewteen the BP and the Contact person.Now as your sceanrio suggests that the Contact person's are present in the BW system but not in CRM, i would assume that the relationship also exsits in the BW . So if it does then your BW team should be able to help you in creating the necessary infocube with there analytical tools and you can then use there cube as the datasource and create the necessary Target Group with Contact persons.
Comming to the second part of your question, your guess is absolutely right but to give you more detailed infomation , the BP ID is converted in a unique GUID and this is passed into the program to retrive the necessary information from the BP after the campaign is executed.
Hope this helps!!
Regards,
Naveen

CRM Org Structure download

Hello Experts,
Our business team would like to verify the information in CRM Org Model to see if all the users, groups, … etc. been assigned to the correct model?
With transaction CRM_PPOMA, we could look for each one. If we pull entire company, it is very difficult to verify on the screen.
Hence, we would like to know if there is a way to pull these information into a flat file or spread sheet to verify the information we have. Or could you please tell which are the tables contain these information.
Regards,
Akash

Hello Akash,
In SE16 or by a report you can download any table or view into Excel. So as HRP stores the relationships you could filter them by excluding users and positions if you want and download them to Excel. Even better look for the table with the descritpion of the orgunits (which I don't know at the moment but which can be found out) and make a view where you join and filter the tables and do the same. Or if you want to do sophisticated changes wirte a report, make an SQL-statement based on HRP1001 and give out a list which you export.
Best regards,
Thomas

Org. unit and associated material groups download from Org. structure

Hi,
I want to download the material groups and associated material groups(Defined in External attributes) from organisation structure.
Please suggest how to do it.
Best regards,
Sambit

Hi. There's a point. You said you wanted to download a list so I presumed you wanted all the org units and all the material groups assigned to them.
If you only want to do it 1 org unit at a time the function will work perfectly.
I f you do want to see all I have had another thought actually.
You could run program RHOMATTRIBUTES_REPLACE.
This allows you to replace 1 attribute with another, but if you do not press the "change" button it works as a good report on attributes.
If you just put in attibute PRCAT and then Old Value = Logical System of backend and New Value = Logical system of backend and tick substring then execute, it will show you all the org units and all the material groups.
Just be careful not to press the replace button on the output, that would actually change data.
Regards,
Dave.

Exporting CRM target groups to BW

Hello
Could you pls suggest ways to export Taregt groups generated in CRM to be exported to BW
Thanks & Regards,
Raju

Hello,
did you get the needed informations?
I have the same quetion, haw to get the target groups from CRM to BW.
Thanks,
Cornelia

Sending CRM target group to BW

Hello,
Could u pls tell me how to export a target group created in CRM to BW
Thanks & Regards,
Raju

Hello,
did you get the needed informations?
I have the same quetion, haw to get the target groups from CRM to BW.
Thanks,
Cornelia

FTR_SUBSCR Function Group Download in a EHP4 version

Hi Guys
Im facing an upgrade from 4.6C to an Ecc 6.0 and unfortunally my client had the brilliant idea to install the EHP4 in your QAS system but ddnt installed in the DEV system...
I dont need to mention that transporting the requests from DEV to QAS some of them gave errors..
What i need now it's the FTR_SUBSCR function group EHP4 version in order to compare in the DEV system version but im not getting to the original version thru SE95..
Can anyone donwload this function group in and version with the EHP4 instaled and send it to me? i'll be appreciated.
johnny_martinsAThotmail.com
thanks in advance
Best Regards
João Martins
Edited by: joao martins on Nov 3, 2009 11:26 PM

Z program to download all Z programs,
refer the post by " Arun Sambargi"
check this link,will be useful for you.
Regards
Srikanth
Message was edited by: Srikanth Kidambi

Additional download of ZMaterial Type ECC to CRM after initial download

Hi Gurus
What is the procedure for downloading the additional Zmaterial type from ECC to CRM?
I have already run the initial download .
Thanks in advance

Hi Devi,
1. Use adapter object DNL_CUST_PROD1, for the initial load(Tcode: R3AS).
OR
2. You can also make use of Requests( R3AR2), table is T134
OR
3. Try sychronizing of objects.(Tcode: R3AM4)
Regards,
Shalini Chauhan

Group download in progress...

Dear user, This group is not locally stored, but now due to your
request it is being downloaded. Articles should be available in a
few minutes. To see a progress report you will have to re-read
this article, you may have to set the item as 'unread' or even
restart your news software to cause this article to be reloaded.
DNEWS Home page http://netwinsite.com
DNEWS FTP site ftp://netwinsite.com/dnews

Hi Try this
https://service.sap.com/swdc
Installations & Upgrades-> Entry by Application Group-> Installations and Upgrades" SAP Technology Components" -> SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 4.0-> pick your platform
You have to configure the Maintence optimizer
Check the sim files at https://service.sap.com/RKT-SOLMAN
You can download the sim files so that you can configure the maintenance optimizer.
Do you have SAP Tutorplayer installed ? If not install it from the below link
https://websmp109.sap-ag.de/~sapidp/011000358700001572552002E

Send data from APD to CRM target groups

Hi everybody.
I am trying to make a marketing segmentation of customers in the APD (BI) and I need to send the results to a target group in CRM, my problem is that I can´t see target groups in the u201CData Target CRMu201D.
I select the Logical System and when I select the Data Target the system shows CRM error: Data target TARGET_GROUP_FROM_B not known.
I know that the communication is OK, the RFC is working cause I can see Marketing Attributes (I released data target for replication and maintained attributes) but I don´t know if I need to do something similar with Target Groups of CRM or how.
Does anyone have an idea how can I see target groups in the window of the Data Target?
Thanks.

Does someone have the manual CR900? the manual BW380 sais that there is the information I need, Is there a kind soul that can help me? I will thank it a lot.

Looking to get a new itunes account for my nephew, but he's been using my acount to download his content to ipod. How do i get him his own acount and allow him to download his own content without losing his current content?

Any tips? The key thing is not losing his current content! Most of his content has been downloaded with MY account to his ipod, but now hes wanting his own account, so essentially id prefer to just switch over.

Sure, you can mulitiple accounts on the iPod and on a computer. It will require that the login be changed on the computer and iPod to do various actions like updating apps. When apps from more than one account need to be update, you have to update them one at a time since you can only be signed inot one account at a time. Also see:
iTunes: How to share music between different accounts on a single computer

Block Purchaisng screen for one time vendor acount group

Hi Experts,
Hope everyone is doing good.
How can we block purchasing screen for one time Vendor account group.
User requirement:
He wanted to maintain only Accounting data for one time vendor but not purchasing data.Though I have suppressed all the Purchasing related fields in Screen layout for Vendor account group but still at the time of creation of one time vendor "create Vendor:purchasing screen is coming"
Is there any option to suppress/Skip this screen "Create Vendor:Purchasing Data" ?
Regards,
Uzair

- Account group is just one of the four factors influencing the field status. (If all the fields are suppressed in a screen the screen will not appear during the creation of the VMR).
- Company Code, Transaction Used and Purchasing Organization are otehr influencing factors.
- Since the field status depend on several influencing factors, Link rules are necessary which determine the instance of the field status if different influencing factors have different effects.
- Hide has priority 1, Display 2, Mandatory 3, Optional entry 4
- Say for e.g. you want a field to be suppresses due to account group but a mandatory entry due to purchasing organization. Instance hide has the highest priority. If a field was suppresses by account group what was specified by purchasing organization becomes irrelevant.
- Display overrides Required & Optional Entry
- Required entry overrides Optional entry

Upgrade Project: CRM Function Groups

Hi All,
The Function groups like "CRM_ISALES_SOLDTO" which was present in SRM 3.0 is replaced in SRM 5.0.
I am currently on an upgrade project anr there are several Z FM's which gives a call to the FM's under this function group. Since they are unavailable in new system, all these Z FM's are showing syntax error.
Please let me know if there is any replacement made by SAP for the above Function Group or FM's under it?
Thanks
Sangharsh

Hi
Incase nothing suits you, then you need to go for Custom Z function modules in this case.
Take help of ABAP resources and create Z function modules, referring to the Standard Function modules in your old SRM 3.0 Version.
Also, raise an OSS message with SAP on this at the earliest.
Regards
- Atul

ECC - CRM Pricing Condition download

Hi all,
I am trying to replicate condition tables and access sequences into CRM. However, I getting an error message below :
"Field MAINT_STAT of table is not referenced in access CRM PR ZC00"
I have checked the corresponding table in CRM "CUS913" and this table could not be activated due to the error message above.
When I check in SLG1, I get error message :
"Field MAINT_STAT of table is not referenced in access CRM PR ZC00"
"Creating names of generated objects failed"
I have checked my condition object "YDNL_CUSTCNDALL" for any duplicate records, but couldn't find any..
I have no idea why I am still getting this error message. Can anyone please help?
Points will be rewarded accordingly.
Cheers,
Weng

Hi,
ipc is inbuilt in Kernel to CRM 7.0
BR,
Darshan

Materials are not downloading automatically from R/3 to CRM

Dear All,
My R/3 team has created 10 new u201Cmaterialsu201D in R/3 system and these materials suppose to interface to CRM automatically, but it was not.
Before creating these new u201Cmaterialsu201D in R/3 I should have download the u201Cmaterial groupsu201D to CRM. But mistakenly I created the material in R/3 on 14/04/2009 and I downloaded the material groups to CRM on 16/04/2009.
Does u think this delay stopping automatic u201Cmaterialsu201D replication from R/3 to CRM?
I even check for middleware errors in SMW01, but i did not find any error messages.
Kindly advice!
Regards,
Silpa.

Hi Arup,
Thanks for the reply,
I undersatnd that, before we download the "materials from" R/3 to CRM, "material groups" must be exist as "categories" in CRM system.
Materials created in R/3 on 13/04/2009, but materials groups have been downloaded to CRM on 16/04/2009, that's why system unable to interface the materials to CRM automatically.
System tried to interface the new materials on 13/04/2009 but it could not , because new material groups not available in CRM at that time.
Since our material groups are existed in CRM system, we would like to download the 10 newly created materials from R/3 to CRM system.
Please tell me what load i have to execute ?
R3AS (Adapter object -Material) - Initial donwload ?
R3AR4 (Adapter object -Material) - Start request ?
Is there any way to system to donwload them automatically ?
Regards,
Silpa.

CRM: Acount Group download

Similar Messages

Maybe you are looking for