CRM BP Identification number entries (Identification tab) from CRM to ECC

Hi,
I have a requirement to map the CRM BP Identification number entries (under Identification tab) from CRM to ECC alongwith BP flow from CRM to ECC.
1. Is it mapped by standard framework and do we have any view in ECC customer master to display the identification numbers?
2. If not, Is it stored in some table in ECC?
Please suggest,
Thanks.

Hi,
Were you able to resolve this as I am looking to do the same thing? From my investigation, I can't see anything standard that would transfer this data, although it does look like the Identification number is held within the BDoc.
I assume the solution would be to map the field into an XD01 field (either a bespoke field or standard - we are planning to use Corporate Group) but i'm not sure how to progress this... I have found some FM's in table CRMSUBTAB which look like the right sort of thing so that is my next area to investigate.
Please let me know if you have managed to solve this some other way!
Cara

Similar Messages

  • Initial download from crm 5 to ecc 6

    Initial Download of ECC 6 customer_main to CRM works well but mapping of bupa_main from CRM 5 to ECC 6 didn't work.
    In R3AS I got an short dump:
    GETWA_NOT_ASSIGNED_RANGE
    So I tried CRMM_BUPA_MAP to send single customers and I got that error.
    Partially send, receivers have errors:
    I have checked all the fields in the ecc6 settings and crm5 also.
    it is very urgent bec. iam at client side.

    Hi Devi,
    Ya now its clear. So basically you are dealing with the data exchange between the R/3 customer to CRM business partner.
    As you mentioned that the CUSTOMRE_MAIN load is successful
    and that means you have already done the account group to calssification mapping in R/3 transaction PIDE from R/3 to CRM. Pls check the same transaction for the data flow from CRM to R/3. Also check the number range assignment. For more detail check the best practice guide C03.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Relation ship from CRM to R/3?

    Hi Friend’s
    Can we send Business Partner Relation Ship? From CRM to R/3
    Can we Download Relation Ships from R/3 to CRM?
    Can we Download Relation Ships from CRM to R/3?
    Plz give me the solution with Example plz
    Regard’s
    Mahesh Kumar
    My mail id is [email protected]

    Hi,
    ->Can we send Business Partner Relation Ship? From CRM to R/3
    Ans: Yes. For this you need to have the subscription 'All Business Partner Relationships (MESG)' assigned to the site 'OLTP' in the transaction SMOEAC.
    ->Can we Download Relation Ships from R/3 to CRM?
    Ans: Yes. Use the adapter object CUSTOMER_REL . You can find this from the transaction R3AC1. Run this using the Tcode R3AS.
    ->Can we Download Relation Ships from CRM to R/3?
    Ans. This is same as Q1.
    It is tough to give examples for such questions. Let me know if you need any help.
    Hope this helps.
    Karuna.

  • Classifier mapping to read Sender & Receiver  Identification Number from XML. How to handle in B2B Add on

    In current See burger tool, We have this functionality to read Sender and Receiver Identification number from the XML. Is there any way in b2b add on to do this.

    Hi,
    The classifier within the Seeburger context is being used to call your parent mapping, in case you want to dynamically determine your mapping, based on data in the UNB/UNH segment.
    Within the B2B add-on, there is no need to.
    Only use module localejbs/EdifactConverterModule in case you want to convert to or from EDI.
    You have a specific requirement or do you want to test something out?
    Kind regards,
    Dimitri

  • How to get Account Identification Number  from a different component

    Hi,
    My requirement is
    I have created a  zview in component  ICCMP_BT_IRHIST.
    I am navigating from one view in ICCMP_BT_IRHIST to this zview.
    I want to get the account identification number in this zview.
    The account identification (attribute is present in this component CRMCMP_BPIDENT.
    For getting the account identfication number
    i m writing this code in the layout of the zview
    TRY .
            lr_cuco  ?= controller->get_custom_controller( 'CRMCMP_BPIDENT/CuCoBuPa' ).
        CATCH cx_sy_move_cast_error.
          RETURN.
      ENDTRY.
      check lr_cuco is bound.
      lr_entity ?= lr_cuco->typed_context->SEARCHCUSTOMER->collection_wrapper->get_current( ).
      check lr_entity is bound.
      lv_account_name = lr_entity->get_property_as_string( iv_attr_name = 'BP_NUMBER' ).
    But im not able to get the account identification number  the problems are
    lr_entity is initial ...where as   lr_cuco is bound only....to this view....
    waiting for suggestions....
    Regards,
    Sijo....

    Hi ,
    In the IC Agent Role there is predefined Global Context Node, You can use the Following
      DATA: lr_gdc       TYPE REF TO if_crm_ui_data_context.
      lr_gdc     = cl_crm_ui_data_context_srv=>get_instance( me ).
      lr_entity = lr_gdc->get_entity( name = if_iccmp_global_data_cont_con=>gdc_currentcustomer ).
    Based upon ur Rrequirement you can use
    GDC_CURRENTBT
    GDC_CURRENTCASE
    GDC_CURRENTCONTACT
    GDC_CURRENTCUSTOMER
    GDC_CURRENTINBOXITEM
    GDC_CURRENTIREC
    GDC_CURRENTCONTEXT
    GDC_CURRENTIBASE
    GDC_CURRENTIOBJECT
    GDC_CURRENTSERVICETICKET
    Parameters in the  if_iccmp_global_data_cont_con
    Regards
    Vikranth

  • What is the use of Withholding tax identification number field?

    Hello SAP Experts,
    I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
    Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
    As per SAP:  Withholding tax identification number
    This is a number issued by the tax authorities per withholding tax type.
    This number must be specified in Customizing either:
    (a) As part of the withholding tax information defined for the company code, or
    (b) As part of the withholding tax information defined in the customer or vendor master record.

    Hi Pete,
    The only thing that I could check is the content used in US:
    See content of this field for US:
    LFA1-STCD1      Social security number
    LFA1-STCD2      Employer identification number
    LFBW-WT_WTSTCD  Withholding tax identification number for WT Type
    In order to populate it, please kindly check the following:
    The reason why you cannot fill in the field WT_WTSTCD in transaction
    Fk02 however you can do it in XK02 (Change vendor centrally) can be due
    to wrong customizing of the field status group.
    Kindly check the following:
    SPRO->
    Finantial accounting -> Accounts receivable and accounts payable ->
    Define screen layout per activity (vendors) -> Change Vendor(Accounting)
    Company code data -> W/holding tax data, w/h tax 2 ->
    FIELD Withholding tax code,w/h tax 2 will be probably just available to
    display. Please, change it to optional entry.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • SAP CRM 7.0 Webclient - Product Identification (IBase or IObject)

    Dear SAP IC-Experts ,
    I am new in the configuration of the SAP Interaction Center (SAP CRM 7.0) and have a process orientated question.
    In my proyect the company is producing bathroom products which are installed in hotels, private homes, etc.. They sell their products via partner so they in most cases dont know where there products are installed until the end-user calls when they have a service problem. In the Interaction Center I have seen the Account and Product-identification Workcenter Page.
    1. My first question is do I have to use IBase or IObjects to save the proyects in the Database? If I understood correctly IObjects can only be used if I have a serial-number for example which are used for cars or laptops to be able to uniquely identifie a product. As Bathroom products does not have this this kind of identification number to identify a single object I have to use IBase right? Additionaly I the company sells for example 30 times a shower cabine to a hotel I can not use IObject too because there is installed 30 times the same product in different floors and hotel rooms. This leads me to the conclusion that we have to use IBase which leads my directly to the second question
    2. When using IObjects there is a Create-Button to create a new IOBject but this create button does not exists for a IBase in the View. When the end-user is calling me can I create in a very short time the installed base (IBase)? I hope I could make myself clear?
    Basically I need to know if using IBase or IObjects for bathroom products and if using IBase how can I create it quickly as an IC Agent when the client is calling?
    Best Regards
    Oliver

    Hello Oliver,
    Yes, you are correct. The IObject (individual object) is intended primarily for consumer-facing scenarios involving serialized registered products. For a B2B scenario where a company has a footprint of installed products (whether it be HVAC equipment, plumbing systems, faucets, etc.) it is probably preferrably to use the Installed Base object to model the installation.
    As you noticed, there is no native possibility to directly create new Installed Base hierachies from inside the Interaction Center directly (though there is an option for IObjects). The rationale here is that while a contact center agent would often register a new consumer product, they probably would not usually create new Installed Base hierarchies; rather this is something that, like creation of service contracts for example, is typically done by a Service Professional using the ServicePro role. However, you can always add a link to your IC menu to launch the ServicePro screen for IBase maintenance/creation in order to allow the agent to create or maintain the IBase hierarchy. A little cumbersom of course, but definitely a possible workaround.
    Warm regards,
    John

  • How to mask SSN number in Identification Number field in BP?

    Hello Gurus,
    We have a requirement to mask the initial 5 digits of SSN number when displayed in the Identification Number field in the Identification tab of BP transaction. What is the best way to go ahead with this enhancement?
    We do not want to encrypt the data at the database level. Just encrypt at while displaying SSN Number on BP transaction.
    If anyone has carried out such enhancement, would appreciate if you can share how you did it?
    Thanks to all in advance,
    Shyamak

    Shyamak,
    This is for CRM -
    Go the PBO of the screen that has identification details. In a suitable PBO module, you can implement and implicit enhancement point and change the data in internal table.
    In my system it is function group BUD0. It would be same in yours as well. Screen is 1520 for me, it may be something else for you. I would have done in module - 'pbo_1520'. Do it at the end of this module. Internal table name GT_BUT0ID
    You need to so something similar in ECC
    Cheers
    Niraj

  • How to get Account identification number in a ZVIEW ( Empty View )

    Hi  ,
    I created a  ZVIEW in  component ICCMP_BT_IRHIST from an existing standard view in this component im navigating to ZVIEW. In the Zview i want to get the account identification number.In the ZVIEW
    I am writing this part of code
    <%
    data: lv_account_name type string,
            lr_entity       type ref to cl_crm_bol_entity,
            lr_cuco         type ref to  CL_CRMCMP_B_CUCOBUPA_IMPL,
            lv_account_id   type string,
            lv_account_type type string.
      TRY .
            lr_cuco  ?= controller->get_custom_controller( 'CRMCMP_BPIDENT/CuCoBuPa' ).
        CATCH cx_sy_move_cast_error.
          RETURN.
      ENDTRY.
      check lr_cuco is bound.
      lr_entity ?= lr_cuco->typed_context->SEARCHCUSTOMER->collection_wrapper->get_current( ).
      check lr_entity is bound.
      lv_account_name = lr_entity->get_property_as_string( iv_attr_name = 'BP_NUMBER' ).
    %>
    eventhough lr_cuco is bound lr_entity is not getting populated.
    as a result im not able to get the account identification number in the ZVIEW.
    Any suggestions on this ...................
    Regards,
    Sijo.......
    Edited by: sijokjohn85 on May 7, 2009 3:12 PM

    HI,
    I have a similar kind of Issue and would like to k now How you resolved the issue.
    I have two standard components, I am trying to read the custom controller of Component-1 in component-2.
    The Object is bound but the value is empty, Similar to what you experienced.
    Any tips will be really helpful.
    Cheers..

  • BP Identification Number Authorisation

    Hi All,
    My requirement is to hide certain Identification Numbers based on ID TYPE in BP from certain users. I can't seem to do this with standard Auth Objects.
    As standard there seems to be two options:
    1. Use the Field Group Auth object B_BUPA_FDG, but this hides the whole field, it is not possible to specify which ID Types are visible to the user.
    2. Use Auth Object B_BUPA_ATT by maintaining a Authorisation Type for the ID Type field in customizing. This doesnt meet the requirement because if the auth fails then the user cannot display the BP at all, not just the specific field.
    I have read this thread and it seems to work in the same way as 2 above.
    BDT and event AUTH1
    Has anybody else done something similar to what I am trying to achive?
    Thanks,
    Sam

    Hi,
    Were you able to resolve this as I am looking to do the same thing? From my investigation, I can't see anything standard that would transfer this data, although it does look like the Identification number is held within the BDoc.
    I assume the solution would be to map the field into an XD01 field (either a bespoke field or standard - we are planning to use Corporate Group) but i'm not sure how to progress this... I have found some FM's in table CRMSUBTAB which look like the right sort of thing so that is my next area to investigate.
    Please let me know if you have managed to solve this some other way!
    Cara

  • Mapping of Identification Number Categories for Business Partners

    Hi people!!!
    I´m working with the table BPIDCONV on Solution Manager, which is the table of Mapping of Identification Number Categories for Business Partners.
    Somebody knows how create an entry on this table?
    I suppose that is on Customizing.
    Is very very urgent, please.
    Helpful answers will be rewarded.
    Thanks and regards,
    Manuel.

    Hi,
    The tax category of all the countries are stored in Table TFKTAXNUMTYPE
    and it is a standard SAP delivered table and should be identical in all
    our customer systems.Table TFKTAXNUMTYPE is governed by the legal
    requirements and hence SAP provides Tax category for only those
    countries which have defined legal requirement for maintaining that
    particular Tax number to keep system legally complaint.
    Please find the note 775919 which comprises of all the available
    Tax types to our customers which are delivered by SAP.
    I hope this information is usefull and help you to resolve your
    query.Feel free to get back to me if you have any issue further.
    Regards,
    Tauseef Ahmad

  • Taxpayer Identification Number

    Hi!
    I live in Sweden, I´m a individual person, not a company. I want to publish my app on the App Store. I need a Taxpayer Identification Number according to the "tax information and banking" part. How do I get it?
    And do i choose "Exempt Payee" or "Subject to Backup Withholding"?
    Best regards
    Michal

    You can get a taxpayer ID from the IRS. you'll want to file if you start making a lot of money without having any operations in the US. If you have operations in the US, you can deduct those expenses and end up with no taxable income.
    You have to be grossing mutli-thousands of dollars in sales before tax is really much of an issue. And even then you'll owe almost nothing. You can make yourself exempt if you expect to owe no tax.
    But if Obama gets reelected, or if the mandated tax for "no insurance" sticks, then I wouldn't worry about honoring the IRS, because they'll already be having a **** of a time with tax compliance from us ordinary Americans. Plus global currencies will be a train wreck.

  • Call identification number not activated

    Hi guys,
    It`s already 1 week since I bought credit and I asked for the call identification number.
    I have tried several times but without any success or error message.
    It`s very important to have this number otherwise my friends will not answer to my `private or 0000011` phone number.
    Thanks. 

    FDH wrote:
    I am wanting to use my Japanese contact number for my CALLER ID but there is no country code (+81) available in the drop down menu. Is there some other way to enter this as there is an obvious oversite by Skype in leaving out Japan in this field.
    Skype can't use a Japanese number as Caller ID. Online Numbers from a few countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US) can be used as Caller ID, and Japan is one of the two countries (the other is Mexico) where a mobile number can't be used as Caller ID when calling from Skype. 
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Mobile Identification Number

    Hi,
    I have a requirement to identify the mobile device from its specific identification number. I have studied the differences between MIN, MDN, IMEI etc.
    Is that possible to get the identification number in j2me core.
    Any ideas ?
    rizzz86

    Rizz86,
    Below is (found on the net) how to get IMEI for some handset vendors.
    Looking at it, everyone uses some form of imei in the name of the property, so maybe getting all properties and enumerating through all searching for case-insensitive imei would simply work on most if not all handsets...
    I am not sure, whether retrieving MIN or MDN numbers is possible and whether it makes much sense. MDN is not stored within the phone but mapped to the SIM card and MIN is definately stored by the operator.
    Please also keep in mind that 10% of IMEI numbers out there might be duplicated, so you might get exceptions now and then.
    Anyway, here is the list:
    Nokia
          System.getProperty("phone.imei";);
          System.getProperty("com.nokia.IMEI";);
          System.getProperty("com.nokia.mid.imei";);Note ; Requires signed midlet. S60 3rd edition device does not requires signing for this to work.
    Sony-Ericsson
      System.getProperty("com.sonyericsson.imei";);Note ; might not work on all model, YMMV
    Motorola
    System.getProperty("IMEI");
          System.getProperty("com.motorola.IMEI";);
    Samsung
    System.getProperty("com.samsung.imei";);
    Siemens
    System.getProperty("com.siemens.imei";);Good luck!
    Daniel

  • Create user column in Identification number assigment block

    Hi!
    Does anybody know how to find user that create the identification number.
    I want create new column in Identification number assigment block.
    BuilIDNumber entity  and BUT0ID table don't have fields with that information.
    Searching BAPI doesn't give any effect.
    Regards, Marat.

    Hi!
    I have new task.
    Add "Create user" column in "Addresses" assigment block.
    In BuilChangeHistoryRel I can find records with full text of address ( Country, PostCode, City etc ) , but not records with addrnumber or addressguid what unique determinate any address.
    Does anybody know how to find address author from addrnumber or guid?
    Regards, Marat.

Maybe you are looking for