CRM BSP customization

Hi Gurus,
we have upgrading our CRM 3.0 system to CRM 4.0(Mobile sales). initially we have VB front end for our mobile clients. Now we want to migrate all applications to SAP Portals. In this process we need some customization in our existing BSPs. I am new to ABAP development. 1) How much ABAP skills we need to customize the existing BSPs.
2) Any steps I can follow to customize the BSP applications would be helpful?
Advance thanks to You all
Murthy

Hi Murthy,
You can activate (invoke) the CRM Designer by doing the following
1) Install the CRM Designer on the local machine - from where you will do the modification.
2) Call the Blueprint Application Builder (Transaction CRMC_EXEC_BAB_C or through IMG)
3) In Application dropdown - select the Application which you want to do design changes
4) In View dropdown - select the View which you want to design (leave empty if you haven't yet created a new view for that application. Its recommened to have a view assigned to the application)
5) Expand the Save button
6) Create Transport Request
7) Select the screen area which you want to Design
8) Click on designer and the CRM Designer will open as a seperate application.
Thanks
Harsh

Similar Messages

CRM - BSP applications - Getting started

Hi Experts ,
I have a knowledge of BSPs used in R/3.
and for my project requirement now i am asked to study CRM BSPs.
And i am not aware of the CRM BSP applications at all.
what is the difference between BSPs and CRM BSPs ??
Can anybody give me a Document containing overview of CRM BSP applications?
Also for this do i need the knowledge of CRM functional areas?
Regards,
Ashish Shah

Hi Ashish,
CRM BSPs and R/3 BSP are similar. They are similar, if you are designing custom BSPs.
In CRM we have SAP standard BSP applications which were develped on MVC architecture. They are 1) CRM_IC ( CRM Interaction Center) 2) CRM PCUI
These are standard SAP developed BSP application which are ready to work.
Each customer using CRM system, may need some customization in these Applications.
So in CRM we will work on These standard BSP applications as well on Custom build applications, depending on customer needs.
Thanks,
Babu

Using CRM BSPs in Mozilla -- getting Design2002 error

Hi there,
we're trying to integrate the BSPs of CRM 4.0 to our NW04-Portal. On the WAS 6.20 of the CRM system SP49 is installed. For example we're calling http://fqdn:8005/sap/bc/bsp/sap/crm_bsp_frame/entrypoint.so?appl=CRMD_BUS2000126 (to maintain activities in CRM).
Now when we call the BSPs from Mozilla 1.7.5 we get the message, that just IE >5.50 and NN>6.20 are supported by Design2002.
I'm not a developer. So how can I make the CRM BSPs work with Design2003 that is also supported by Mozilla/Firefox.
Is it possible to switch to Design2003 and can somebody tell me step-by-step, what to do???
We tried using the URL-parameter sap-htmlb-design=Design2003, but this wasn't the solution.
Any help appreciated
Marko

The CRM PCUI framework 4.0 only supports DESIGN2002. CRM uses in combination with our design2002 a lot of additional custom rendering, which does not match the HTML outputed by design2003. It will not be possible to have CRM 4.0 support Mozilla. (As far as I know, CRM only supports IE with the 4.0 version. You should check their release documents.)
This thread is moved to CRM forum.

How to call CRM BSP for F4 (CRMM_BUPA_SEARCH) from BIW BSP

Hi,
we have a BIW BSP showing:
- query results using a web template and
- an input field for business partner no (bp) to process.
Now we would like to call the F4 value help for bp CRMM_BUPA_SEARCH in a popup from the connected CRM system, which is reachable with CRM BSP CRM_BSP_FRAME.
How can i populate the value selected in the result list of the bp value help in the popup into the the input field in BW BSP?
Can anyone give some advice?
Thanks and kind regards,
Peter

>I found your blogs, but this seems to be very complicated?!
Complicated to implement the extension element -> yes unfortunetely that probably is the case. Hopefully once you have the extension element in your system though, you would find that it is easy to use in applications.
Any type of highly generic programming (as is necessary to support complex search helps) is going to be somewhat complicated by necessity. I tried to hide this complexity from the consumer of the element, but someone has to get the element into your system in the first place.
We are going to ship an enhanced version of the search help on a CD with the upcomming release of the BSP Book for SAP Press.
<a href="http://www.sap-press.com/product.cfm?account=&product=H1903">Advanced BSP Programming</a>
We include a transport file if you just want to import it into your system or text files/screen shots if you want to implement it manually. There are also example and test applications to help you use the extension.

CRM BSP's

Hi All,
I am learning BSP's.I have practiced some of examples which is provided by SAP like Slight example like that.
Can anybody please provide some relatime examples on CRM BSP's.So that i will get little bit real time experience in BSP's.
Thanks,
Taragini

And how do you think they can be delivered?
CRM BSP's tend to be quite complicated, with all of its views, controllers, application classes etc. etc. Bottom line, this is hardly feasible and the 'only' way would be to get access to a CRM system.
But I guess that any other BSP will do for that matter, so if you have access to an arbitrary R/3 system, they to have a lot of real time BSP's.

Help Debugging a CRM BSP...

I need to be pointed in a direction on how to best troubleshoot a CRM BSP application. The application is a Portal Iview that call the CRM Application called CRMD_WF (Workflow).
I understand BSPs and ABAP and web programming, just looking for some good tips, transactions in CRM to review this.
Regards,
Tom

just place a HTTP break point in your BSP application, when the same is called from portal a new GUI debugger session will open up when the process reaches the break point.
Aother options would be to set the trace for your BSP application and from SICF.
Regards
Raja

Cannot open PDF link in CRM BSP application

Hi There,
I am using CRM BSP application. While I am on the CRM Webpage and I choose a tab like Processing Sale. I go to attachments and there is a link to open the PDF file. On the Development environment if I click the link, the PDF file opens but in the Production environment if I click the PDF link, the file does not open.
What sort of settings do I need to change in the config i.e. in the transaction SICF to be able to open the PDF file. The difference that I found in the environments was that in TCode SICF, default_host->sap->bc->contentserver. There was no user setup in the Production environment but in Development there was one. But I created a similar user but still the problem not solved. Any suggestion would be appreciated.
Thanks in advance !

Hello,
We are facing the same problem actually and oss ask us to check the following :
635049 CRM Content Management:Word integration in People-C
606745 CRM Content Mgmt.: Document does not open
646177 CRM Content Management: Error/no response in the to
Also check if the logon data is maintained for the service
/default_host/sap/bc/contentserver in the transaction sicf.
Maybe it can help you.
Regards,
Frédéric

BSP Customization

Hello SDNers,
We have upgraded 4.6c to ECC 6.0, implementing Portal 7.0 ESS/MSS.
We have deployed the Bussiness package 1.0 (mySAP ERP 2005) for ESS/MSS. There were lots of changes in this business package.
Since, we were trying to use training and event management in Portal, the documentation tells to use LSo for the TEM.
LSo is an BSP based application HCM_LEARNING, we need to customize this application as per our bussiness needs.
Can anybody guide, how to go ahead with the BSP customization. Any help in this regarrds would be highly appreciated.
Thanks in advance.
Kind Regards,
Anil Kumar

Some mroe links..
<a href="https://websmp104.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002005592003E">SAP Learning Solution Configuration Guide</a>
https://websmp104.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006514932006E
<i>*Reward each useful answer</i>
Raja T

List of CRM BSP Applications

Hi All
Can any body please send the list of CRM BSP applications.
I have done E-Recruitment BSP changes.
Now my requirement is to change CRM BSP pages.
Is there any difference in normal BSP and CRM BSPs?
as I am seeing some PCUI layout and others.
Thank you in advance.
Ravi..
[email protected]

Hi,
CRM BSP applications normally refer to BSP applications based on PCUI framework. While BSP applications can be any *.htm pages with embedded ABAP code.
You can see a list of all the CRM BSP applications (PCUI applns.) as follows :
1. Go to SE80.
2. Open BSP application
CRM_BSP_FRAME
in the repository browser.
3. Right-click on the application name and TEST.
4. Select
select.htm
from the pop-up.
You will find the full list of the latest versions of PCUI applications.
Please reward if helpful!
Thanks,
Sudipta.

Need some material regarding sap crm base customization

hi to
this is nagaraju want some material about base customization in sap crm ,
if any one having plz forward to me
my mail id [email protected]

Hi nagaruju,
Look at best practices.
-<a href="http://help.sap.com/bp_crmv250/CRM_DE/index.htm">SAP Best Practices for Customer Relationship Management - V2.50</a>
Regards.
Manuel

CRM - ISA customization

Hi
I am new to this CRM- Internet Sales Application. My client requiremnt is to modify the existing ISA Application. Client installed NWDI-NWDS successfully. They have created the track in the NWDI and imported into the NWDS.
Here , I am not understand how can we figure-out which component we need to modify for the customization.
For example , which java file , par file ...
If anybody having idea on the CRM-ISA applications please share it with me.
Sure.. points will be rewareded
Thanks
Ravi

Hi Fredrik,
the configuration files are kept outside of the application folder and even after upgrading it the configuration will not get lost - that is the main idea behind the XCM tool.
If you deploy a new ear (or even the already deploy one) you have two possible answer:
- re-configure the new application
- or use the old configuration
To reconfigure the application you can just start the XCM took and proceed as you did with the first application.
If you want to use the same (old) configuration you can just change one line in the WEB.XML file of the new one and the new application will be pointed to use the configuration files of the old one. I hope that this was lear enough.
In other words, after you deploy the first application a new folder will be created and this folder will contain three XML files with all the application configuration: please check the following path <j2ee instance>sys/global/xcm/crm.b2b in case you deploy the standard b2b application.
If you deploy the next application (named b2b_fredrik) another folder will be generated: sys/global/xcm/crm.fredrik - this folder will contain the configuration of the newly deployed application. But as I said if you want to use the old b2b configuration please open the web.xml file of both application and check how are these sys/global/xcm paths maintained - just make sure that the customer.* parameter contains the same path as in the B2B web.xml.
After you restart the application you can use it.
cheers
Borislav

Restricting the drop down menu contents in CRM BSP application for portal

Dear All,
I have a problem with CRM BP where I am accessing a BSP application for ACTIVITIES - SEARCH "CRMD_BUS2000126_F4" as an iview. This iview has been assigned to a user who is an external employee of the organization. This contains a drop-down menu to search for ACTIVITIES based on user's choice(ME, MY DEPT, MY GROUP..etc). My problem is to restrict the choices in the DROP-DOWN menu to only ME and remove all others.
How do i do that???
rgds
Chan

Hi Chan,
u r on right track.
Save the changes that you make to the field group (entering a default value and tick 'read-only')
I hope you are changing the field-group in CRMC_BLUEPRINT_C.
after u have saved the canges to the fieldgroup, you need to re-gerenate the layout.
Layout of User Interface (People-Centric UI) -> Application Element -> Field Group -> Layout Generation.
Enter the name of the fieldgroup that u just changed.
First run it as it is (with the "Only Check Field-Groups" ) to see if it is running into any errors.
If there are no errors, Make sure that you remove the "Only Check Field-Groups" option and then execute.
The layout will b generated and you should see the desired changed now.
Hope this helps. / reward points if helpful..
Regards,
Raviraj

Direkt link from a web dynpro (non crm system) to the crm bsp page from sap

Hello,
we are trying to call the bsp page like opportunities details edit in edit mode with a parameter that discriebes the opportunity. AT the moment we can the page but don't know how to tell the system what opportunity should be displayed and in edit mode or not . Any hints ? or documentations ?
thanks
Juergen
http://rxxxx.com:8080/sap(ZT1yOFhyMTZmamJ1am1PX01yOHlUMENRLS12Y1VwVHlKUElWckR4X25DZDRxeVJnLS0=)/bc/bsp/sap/CRM_UI_PORTAL/BSPWDApplication.do?sap-syscmd=nocookie&sap-client=900&sap-language=en&sap-accessibility=&sap-ep-version=7.00.200711172137&sap_ep_version=7.00.200711172137&sap_ep_baseurl=http%3A%2F%2Fsi0bos49.boschrexroth.com%3A50100%2Firj%2Fportal&NavPathUpdate=false&buildTree=false&crm-portal-theme=BRCOMPASS_LIGHT_STD&crm-portal-role=portal_content%2Fbr%2Fcom.br.fICM%2FCRM%2FSALESPRO%2FSALESPRO&saprole=SALESPRO&crm-logical-link=SLS-OPP-SR

Hi, the central class which is used for external navigation to a component, is CL_CRM_UI_EXT_NAV_SERVICE.
In the URL of the Web Client, you can specify 4 different parameters:
1. Object type : crm-object-type
2. Object action: crm-object-action (A for search, B for Display, C for Edit and D for Create) -> see details in "Define Navigation Profile" and in Define generic OP mapping.
3. Object value (optional) : crm-object-value
4. Object key name (optional): crm-object-keyname
If you use option 3 and 4, then you also need to define a mapper class in customizing to create a BOL entity based on the key name and value. See for example class CL_CRM_UIU_BT_OBJ_MAPPER and method IF_CRM_UI_OBJ_MAPPER~GET_ENTITY_FROM_UI_OBJECT. This is done in "Define Object Mapping". Fro example, for BuilHeader BOL object which is linked to Object type BP_ACCOUNT, you could use the class CL_CRM_BUPA_UIU_OBJ_MAPPER as an example.
Example of an URL:
http://<server_name>/sap/crm/crm_logon/default.htm?sap-client=100&crm-object-type=BP_ACCOUNT&crm-object-action=B&crm-object-value=110&crm-object-keyname=PARTNER
Hope this helps,
Xavier

CRM BSP Framework tuning

Hello,
Is there a guide on bsp tuning in the CRM systems. Calling a BSP, like orders, IC Web client) in the CRM system takes too long (more than a minute).
Any pointers anyone?
Arun

Hello Arun,
how is your enviroment? Is that via a LAN or WAN connection? How is the Bandwith? Is HTTP 1.0 or 1.1 used? Please provide more details.
Regards
Gregor

CRM form Customization part

hi all
I think a problem of dynamic crm is that there is no item for searching a field in customization-field part. I guess it would be much better if this item is added.

Hello,
I believe you've posted your suggestion in a wrong portal. In case you have suggestion regarding wanted features for CRM you should post it on
Connect portal. In case feature would get a lot of voices it could help to get this feature implemented.
Dynamics CRM MVP
My blog

CRM BSP customization

Similar Messages

Maybe you are looking for