CRM Contract replicate to ECC Debite memo

HI expert team
In standard replication from CRM Contract replicate to ECC Debite memo, I have some material in ECC with Material type KMAT Configurial product, same material code and description created in CRM with material type as service material, When i create service contract and release it is giving replication error with "Product Cannot be recorded in ECC", When i create debite memo with same material code system creating debet memo and item category determination in ecc as debet memo item category in debete memo even though material is configural product,
in the same steps i have some service material in ECC as service material created with service material type, for these material i created in CRM with same code and description, when i create service contract system replicating as debit memo,
Thanks in advance
Regards
Rachappa
9448472121

Hi,
There are prerequisites to be maintained in CRM and ERP for CRM contract to be replicated in ERP as a debit memo.
Please find the details in the below link:
http://help.sap.com/saphelp_crm50/helpdata/en/65/9c4d3bcf95926ae10000000a114084/frameset.htm
In your case I assume Debit memo is not being created for the Service product and giveing error "Product Cannot be recorded in ECC", because system is finding the same product in ECC as configurable material type (Service product in CRM, config material in ECC).
As per the prerequisite Synchronization of master data (SAP CRM and SAP ERP) should be maintained
All business partners used in SAP CRM transaction documents also exist in SAP ERP.
Service products in SAP CRM exist as materials in SAP ERP.
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Oct 8, 2009 6:12 AM
Edited by: Chethan Kumar C M on Oct 8, 2009 6:29 AM

Similar Messages

Replicate CRM Contract to ECC

Hi All
I've a scenario where
(1) I have to replicate CRM Service Contracts to ECC. Is it possible to do the same? If possible then how?
(2) Is it possible to maintain SLA values in CRM Sales Contract at which can be transfered to the Orders which are created with reference to the respective Contract?
Thanks in advance.
Avi

Hi,
There are prerequisites to be maintained in CRM and ERP for CRM contract to be replicated in ERP as a debit memo.
Please find the details in the below link:
http://help.sap.com/saphelp_crm50/helpdata/en/65/9c4d3bcf95926ae10000000a114084/frameset.htm
In your case I assume Debit memo is not being created for the Service product and giveing error "Product Cannot be recorded in ECC", because system is finding the same product in ECC as configurable material type (Service product in CRM, config material in ECC).
As per the prerequisite Synchronization of master data (SAP CRM and SAP ERP) should be maintained
All business partners used in SAP CRM transaction documents also exist in SAP ERP.
Service products in SAP CRM exist as materials in SAP ERP.
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Oct 8, 2009 6:12 AM
Edited by: Chethan Kumar C M on Oct 8, 2009 6:29 AM

Plant Replication CRM Service Contracts & Orders - ECC Debit Memo Requests

Dear experts
we are struggling with the assignment of a plant in SAP ECC Debit Memo Request Line Items created from SAP CRM documents - the Plant field on the Shipping tab stays empty. This refers to Service Products.
We use CRM 7.0 (however, same problem exists in 2007) with ECC 6.0 with the following main relevant settings:
- Service Products do not have a Plant assigned in their Distribution Chain data
- Table CRMC_SEORG_R3MNP contains a correct mapping of service organizations to plants
- Table OFIC_PLANT_SVC does not contain relevant settings, as we assume this table as not relevant in this scenario
This is the end status after some trial&error sessions - we did not find a successful combination of settings amongst the above.
Thanks in advance & kind regards
Christian

Should it be a problem related to the leading zeros?

How to map service contract data from ecc to crm

Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..

Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath.

Billing of CRM Contract   in ECC

Hello Experts
Can we do the billing ( periodic billing )   for a CRM contract in ECC ? .
I am aware of the CRM contract being billed in CRM .
Please clarify if it is possible   and also the   procedure for the same ( Billing of   CRM contract in ECC ).
Early response is   appreciated.
Regards
Raj

Hello Rajesh,
Yes it is possible. You have to maintain some synchronization settings iin CRM and ECC as well mapping the item categories from CRM into ECC.. Read the following link for a start. Good Luck!
http://help.sap.com/saphelp_crm70/helpdata/en/46/94adc087bd13eae10000000a155369/content.htm

Replicate Create CRM BP as an ECC BP

Hi Gurus
Is it possible to create a CRM BP as an ECC BP (Table BUT000) and not a Customer?
I thought this would be possible but the configuration does not appear to cater for this scenario.
Many Thanks in advance
Regards
Panduranga

Hi Panduranga,
If you want replicate a business partner in the good role from SAP CRM to SAP IS-U, try to create a BP (with CRM) by using transaction BUP1 and put "Sold-to Party" for BP role.
Best regards,
Rémi

SLA AND SRVICE CONTRACTS REPLICATION TO ECC IS POSSIABLE? HOW ?

Hi service experts generally contract value and in house order are replicating to ECC. But present requirement is we want replicate the SLA and service contracts and service orders to ECC what are the setting is require to do this job how the contract product will replicate to ECC for this any middle ware settings is required?
help us please.
Edited by: bindhu madhavi on
May 12, 2008 7:35 PM
Edited by: bindhu madhavi on May 12, 2008 7:58 PM
Edited by: bindhu madhavi on May 13, 2008 5:03 AM

Hi Bindu,
Service Contracts do not get repliacted to SAP ECC, all they do is create an internal order if single object controlling has been activated.
Service Orders can be replicated to SAP ECC, they create a sales order their. The settings requried for this are same as that requried for replicating any transaction, i.e.
1. An order type in ECC with the same name as that of CRM trnasction type (Tcode VOV8)
2. Item category in ECC with the same name as that of CRM Item category (Tcode VOV7)
3. Maintain Item category determination (Tcode VOV4)
4. Maintain Pricing Procedure Deterrmiantion (Tcode OVKK)
Other than these, u have to ensure that the master data i.e. Business Partner, Product Master and Orgnizational Data exists in both systems.
For service Products to be replicated, you will have to create a product using R3PRODSTYP and category MAT_DIEN.
WIsh this helps.
Regards,
Shalini Chauhan

ISU- CRM Contract Integartion

I want to replicate ECC 6.0 Contracts in CRM 7.0 as Contract items.
I found ISU/CRM Contract integration Cookbook but that just explains replication in the direction CRM -> ISU, however i want it to work from ISU -> CRM.
Can anyone please help me with that? or let me know any useful document that i could refer to achieve my task.
I will highly appriciate any help.
Regards,
Nasreen Shayeq

hi,
Please, goto service.sap.com - > /utilities - > SAP for Utilities - Product Information -> SAP CRM for Utilities -> Cookbooks&Guidelines -> IS-U/CRM Contract Integration
Hope it's help,
Regards,
Denis.

SRM 7.0 Central Contracts Migration from ECC existing contracts

Hi colleagues
We are facing the implementation of SRM 7.0 in a client who has ECC installed and we have a doubt with contract migration
We are considering using SRM Central Contracts in order to get them replicated on ECC
All the contracts "alive" that exist in ECC should be created on SRM as central Contracts. The problem is that when you create a SRM central contract the system will replicate it to ECC ... in that case we will have the same contract twice on ECC
Does anybody face this situation?
I figure out that if at the moment we are creating SRM central contracts we turn off XI/PI the system would not replicate the contract to ECC but I think it would return an error without creating the contract on SRM... and even if we managed to create the central contracts in SRM without replicating them to ECC we would have the problem that both contracts wouldn´t be linked
We can´t consider the solution to be creating those contracts on SRM as SRM local contracts because we need to follow contract cicle in SRM after migration
Could anybody help me out with these?
Thanks
Regards

Hello,
You can upload contracts from ECC to SRM using report BBP_CONTRACT_INITIAL_UPLOAD in SRM.
If you want take care of document type mappings/ Condition type mappings, use badi BBP_CTR_INIT_UP in SRM.
Thanks,
Sushil.

Product Replication from CRM 5.0 to ECC 6.0

Hi,
 My requirement is to replicate newly created product master from CRM to ECC.
 For this I created subscription with publication name Product Materials (MESG).
 Nest created product in CRM, but this product is not replicated to ECC. But BDoc generated successfully with status green.
 Where as new sales orders,change sales orders, BP changes, Product master changes are replicated in ECC from CRM and Vice Versa.
 Appreciate, if some one could tell me the steps I need to do in ECC & CRM to replicate new products created in CRM into ECC.
Thanks & Best Regards,
SAP CRM MW.
Message was edited by:
 SAP CRM

Hi BPB,
Have you created a number range for materials in CRM?
If you create materials in the R/3 system and the CRM system in parallel, duplicate numbers for different materials may occur if the number ranges in the R/3 system and the CRM system are overlapping. Duplicate numbers do not cause errors because each material gets an internal unique identifier in addition. To avoid duplicate numbers you have to make sure that the number ranges for materials in the CRM system and the R/3 system do not overlap.
Remove the subscription in Adminconsole that is not required for the product upload.
The upload function is only active in product processing if this was allowed in Customizing.
The corresponding path in the SAP reference IMG is 'Customer Relationship Management -> Master Data -> Product -> Settings for Product Type -> Allow Upload for a Product Type'.
Reward points if it helps!!
Best regards,
Vikash.
Message was edited by:
 Vikash Krishna

Shipping point determination is not happening for CRM sales order in ECC

Hi,
When we create direct sales order in ECC, shipping point determination is happening automatically that means all the relevant settings are properly maintained in ECC for automatic determination of shipping point.
But when we create sales order in CRM and replicate it to ECC, shipping point field is empty even though we use same master data.Hence we are unable to create delivery document.
All the master data (Org structure,Customers,Materials and plants) downloaded from ECC to CRM.
Your help would be highly appreciated.
Thank you.
Regards,
Nagi

Hello Nagi,
Shipping point is determined by the following three factors:
1.shipping condition 2.loading group 3.plant
So please check your customization by the following steps:
1.Use T-code OVX6 to check if you have assigned the plant to your CRM order's sales organization.
2.Shipping condition is usually taken from CRM order directly. Please check whether you have CRM order shipping condition set to the same one as creating ECC order VA01
3.Use T-code SPRO then press F5, go to Logistics Execution Shipping Basic Shipping Functions Shipping Point and Goods Receiving Point Determination Assign Shipping Points to check the shipping point is assigned correctly.
I hope this could be helpful.
Best regards,
Maggie

Saels Quotation,Contract, Order, Return, Debit/Credit Memo Request

Hi,
I have Saels Quotation,Contract, Order, Return, Debit/Credit Memo Request. Now I want to change the Sales office, Sales Group and sales District in the existing Quotation,Contract, Order, Return, Debit/Credit. But in all the these requests these 3 fields are not in editable mode. Plese suggest me what is the best way I can change these 3 fields in the existing Quotation,Contract, Order, Return, Debit/Credit.
Thanks & Regards
Venkat

You can also use :
SD_SALESDOCUMENT_CHANGE
FYI
call function 'SD_SALESDOCUMENT_CHANGE'
 exporting
 salesdocument = salesdocument
 order_header_in = da_order_header_in
 order_header_inx = da_order_header_inx
 simulation = simulation
 behave_when_error = behave_when_error
 int_number_assignment = int_number_assignment
 logic_switch = logic_switch
 business_object = 'BUS2032'
 call_from_bapi = 'X'
 tables
 return = return
 item_in = da_order_item_in
 item_inx = da_order_item_inx
 schedule_in = schedule_lines
 schedule_inx = schedule_linesx
 partners = partners
 partnerchanges = partnerchanges
 partneraddresses = partneraddresses
 conditions_in = conditions_in
 conditions_inx = conditions_inx
 sales_cfgs_ref = order_cfgs_ref
 sales_cfgs_inst = order_cfgs_inst
 sales_cfgs_part_of = order_cfgs_part_of
 sales_cfgs_value = order_cfgs_value
 sales_cfgs_blob = order_cfgs_blob
 sales_cfgs_vk = order_cfgs_vk
 sales_cfgs_refinst = order_cfgs_refinst
 sales_text = order_text
 sales_keys = order_keys
 extensionin = extensionin.
Note:you can go SE80 and choose Function group = 'VBAK". you`ll find Fms.
Hope thisll give you idea!!
Pl... award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

How to add new fields to CRM contract Product List tab?

Hi all!
I would like to add a new custom field for CRM contract (CRMD_BUS2000121) item level, on the Product List tab.
Here I found CRMT_0100A_ORDPRP_I_EXT_UI structure, therefore I enhanced this with new append structure and new fields.
I also added the new fields to ORDPRP_I append structure and mapped the new fields in CRMC_MAP.
For some reason the new fields are on the screen but they are grey, not changeable. What did I do wrong?
Thanks,
Tamas Pentek

Actually for the new IC webclient UI you have need to take a look at your options:
1. New Installation:
Use the EEWB and add the fields. As part of the EEWB work, you will have a couple of post-processing steps where you will add your generated fields to the new screens. However this doesn't require any programming.
2. Upgrade from CRM 4.0/50
- New fields to add as part of upgrade
See the directions for new installation
- Existing fields to add as part of upgrade
--See the blog on the 40/52 CUSTOMER_H migration for transaction fields
--Business Partner fields part of BUT000 available via UI configuration tool, no extra work needed
--Business Partner fields part of tabular extension, manual work required, I am still "perfecting" this method and plan on writing a blog once I have the technique finished.
--Product Attributes - use the transaction CRMM_UI_PROD_GEN and CRMM_UIU_PROD_CONFIG
I know CRM 2007 is based on the same tech foundation as 2006s, with some differences in how the UI tool works and the fact there are some screen layout changes(editable overviews). The extension procedures are generally the same. I can answer some of you extension questions based on my work with CRM 52 so far. It will generally apply to your situation.
BTW: The PCUI is no longer supported in CRM 2006s and above. Even the old SAP GUI transactions such as BP, COMM_PRODUCT are removed from the standard CRM menu. The SAP CRM web client should be used instead now.
Take care,
Stephen

Difference between SAP CRM Security and SAP ECC 6.0 security

Hi
I have extensively worked on SAP ECC security but haven't have chance to work on CRM Security.
Can anyone please let me know the difference between CRM security compared to ECC security.
Thanks...

I am sorry to say, but instead of giving the guy a decent answer you are starting a fight or discussion about stupid forum points...
really sad.....
The big difference between SAP ECC and SAP CRM Security (up to release 5.0) was the following:
1) For sure there are very different transaction codes in SAP CRM as compared to SAP ECC in the first place
2) If you are familiar with R/3 or ECC authorizations; then you know that already on transaction code level, the 'allowed activity' is controlled on tcode level , whereas in SAP CRM , in most cases the 'allowed activity is not controlled by the Transaction code, but on authorization object level....
E.g. transaction code BP allows you to create/change/display any type of Business Partner (e.g; sold-to/ship-to/contact person/employee/customer) which is based on the business partner ROLE concept.... anyway...you can control the allowed activity based on different authorization objects.....
another example is business transaction processing...which can be launched by:
a very generic transaction code: CRMD_ORDER
transaction category related transaction codes :e.g.
> CRMD_BUS2000126 for activity management
> CRMD_BUS200115 for Sales processes
Again...allowed activity is not controlled by the tcode, but on authorization object level...
3) As of the new WEBCLIENT UI (which is valid as of release CRM2006s/CRM2007/CRM7.0) SAP also invented an extra authorization layer, which is UI COMPONENT LEVEL and logical links.... controlled by object UIU_COMP.
However, they also introduced the BUSINESS ROLE Concept (e.g; SALESPRO/MARKETINGPRO/...) which defines actually the functionalities, navigation bar, screen configuration, logical links you can use/see within the new WEBclient UI.
Another thing is that instead of using TRANSACTION CODES, as of these new releases, you are actually using 'external services'....so you do not authorize on tcodes basically....but the logic between tcodes and external services in relation to the authorization objects that are checked is more or less the same....
STANDARD authorization setup in the new WEBUI client is therefore controlled by both backend authorizations (not UIU component related) and the UIU_COMP (restricting access to workcenters/logical links/...)
4) Additionally SAP also provides a concept called ACE (which stand for ACCES CONTROL ENGINE)....
This requires a bit of customizing...and the rest is more or less pure customer development, as you will create your own methods where you'll define a logic which dynamically will verify what kind of access you have for an object....
You should now that ACE is actually implemented on top of your 'normal' sap crm security setup....
cheers
Davy Pelssers

How to find the header and item level status of a CRM contract ?

Hi,
Few questions
A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
B. How to get the BPs associated with a contract ?
Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
Note:
1.     It doesnt store the Business Partner
       responsible for the transaction. To
       get the Partner No, link it with
       CRM_ORDER_INDEX.
2.     This table can be used for search
       based on the Object Id(Business
       Transaction No).
CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
CRMD_LINK     Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
Note:
1.     It doesnt store the Business
      Transaction No (Object ID).
      To get the Business Transaction No
      link the table with
      CRMD_ORDERADM_H
2.   This table can be used for search
      based on the Partner No
CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
Pl.reward points.......

CRM Contract replicate to ECC Debite memo

Similar Messages

Maybe you are looking for