CRM : creation of service in transaction COMMPR01

Hi  Experts
                Can anyone tell me how to create a service in transaction COMMPR01  and also the BAPI or function modules
used to create service in CRM .
Thanks & Regards.

Hi Lakshmi soujanya ,
                Can u give me an example by using the FM  and also the import parameters to be passed.
Thanks & Regards,
Lakshmi Rajkumar.

Similar Messages

  • CRM 2007 New Service Ticket Transaction not visible in WEB UI

    Hi Gurus
    I don't understand why this is so difficult.
    To me I have done everything correctly.
    I have a Service Ticket Transaction visible in the WEB IC.
    I now want to make it visible for use in the WEB UI, I have set the channel to WEB UI.
    Yet when I try to create a new Service Ticket from the Service Professional Role under Service Order the Transaction is not visible. Yet I can can search for the Transactions created in the WEB IC from the WEB UI without an issue.
    Maximum Points for the right answer.
    Regards
    Panduranga

    Solved
    I needed to add the Service Ticket Object Create option into the Navigation Bar Generic OP Mapping Option.
    After that the Transaction Type was visible.

  • Automatic creation of Service Arrangements in SAP CRM 2007

    Dear all
    we're using SAP CRM Resource Planning with HCM integration, so get the Employee Master and requried Availability Info Types replicated from HCM via ALE.
    Unfortunately, between the creation of an Employee and the Time Distribution, a Service Arrangement must be created manually. As both the HCM-side steps are executed automatically as background job, we are trying to find a way to also create Service Arrangements automatically. We do not need to maintain any data other than ID and Name for the Service Arrangement in the first place.
    Can you point me to a way to do this - eventually a function module that would be available for this purpose?
    Many thanks in advance!
    Christian

    Hi Christian,
    You need to do customization settings for automatic creation of Service Assignments. And for the same you need to do all these settings according to the SAP Help Document.
    You can have a look at the flow of the Service Assignment from the link below
    http://help.sap.com/saphelp_crm40/helpdata/en/c6/c14769c3fc814fbe3e5df8edcba791/frameset.htm
    You need to do the customizations from the sap help document. You can have a look from this link:
    http://help.sap.com/saphelp_crm40/helpdata/en/c6/c14769c3fc814fbe3e5df8edcba791/frameset.htm
    Technical Information : As Assignment functionality is based on WFM  Core, there are some BadI's exposed. You can implement them to achieve your functionality.
    Badi : CRM_SRV_SDL
    Implementation                                                     Purpose
    CRM_SRV_SDL_WFM                                         R/3 connection to the WFM Core
    CRM_SRV_SDL_RFC                                          TCP/IP connection to the SAP Business Connector when using the external   Scheduling Engine of a third party vendor.
    In our development scenario, we have used the BadI's CRM_SRV_SDL to achieve the functionality.
    Hope this helps.
    Thanks,
    Samantak.
    Edited by: Samantak Chatterjee on Sep 11, 2009 9:43 AM

  • Creation of Service Product with Set Type and Attribute

    Dear All,
    Please guide me with proper step by step process,
    How to create the product with the set type and attribute for service industry in sap crm 7.0
    Regards,

    Hi Nitin,
    Before creating the Service type of product, you have to define the Base category for Service type product. Generally the category for service will be created under the R3 hierarchy R3PRODSTYPE. You can create this category using the TCode:
    COMM_HIERARCHY. Here you have to select the product type as Service and have to assign the set types to the category.
    You can create a service product using the transaction : COMMPR01 -> Click on Service ICON -> Select the Category for Service Type. Then fill in the details for Service Product description, Service ID(Based on number range settings for products), Language.
    Also fill other details like Base Unit of measure, Pricing condition for different sales areas for the service product.
    Since you are using CRM7.0, you can do all these activities using a POWER USER role.
    For more information about Set types and hierarchies please refer the following help link:
    http://help.sap.com/saphelp_crm70/helpdata/EN/46/57672501a208e7e10000000a114a6b/frameset.htm
    Hope this helps!
    Regards,
    Chethan

  • Creation of Service Order from Service Plan

    Hi Experts,
    I am working on sap crm 5.0 version
    Pls help in the service order creation from service plan  document
    I have Created a service plan product and maintained a service plan template with an interval of 3months
    In Service Plan to service order action  i am using the Standard method call
    CREATE_ORDER_SRVPLAN in the action profile and Action profile Start Condtion 
    Start of interval equal to todays date . when i am executing the action
    First service order is getting created immediately on the serviceplan Creation date.
    Subsequent service orders are getting generated respectively as per defined frequency .
    So I am getting one extra service order . how to restrict the additional service order creation and
    order creation to happen as per template frequency
    Regards,
    Prajit.P

    Hi vishant,
    thanks for ur quick reply.
    I am not able to find the scheduling type as u mentioned for changing the planning start date in template.   I am using the standard date profile SERVPLAN in my  service plan action profile
    Please suggest me the daterule i need to select in the date type start of interval  in my date profile
    Regards,
    Prajit.P

  • Transfer material type DIEN in ECC system to CRM product type Service

    Hi Experts,
    I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
    How can we do this?

    Hi Viswanath,
       I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
       Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
           Customer Relationship Management -->
                 Master Data -->
                        Products -->
                            Settings for Product Type -->
                                    Allow Upload for a Product Type.
       Now here select the check box for product type 02(service).
      To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
             Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
    //Bhanu

  • Auto PO creation from service PR(ME59N)

    Hi All,
    We have service PR's and need to convert to PO's automatically via ME59N.
    I have followed below steps but unable to convert to Po's getting message no Pr's found while executeting ME59N
    checked VMR and Automatic PO check box selected.
    Step1: Creating PR for services
    Step2: and assigned source to this PR through t.code: ME56 (contract existed for this vendor)
    Step3:Run the ME59Nby giving PR Number, but PO is not created
    what could be the reason..is any idea about auto PO creation for Service PR's
    Incase of material i can successfully converts PR's PO's but services i can't.
    Thanks in Advance,
    Warm regards,
    Venkat
    MM/SRM Consultant

    Hi venkat
    it should create a PO if the contract is valid..
    Note 733045 - Wrong Interface values passed to Services for ME59N
    When transaction ME59N is used to convert service purchase requisition
    (PR) to purchase order (PO),the program within the ME59N transaction
    calls the service package with the wrong interface values.
    The following example illustrates one such case :
    A Service PR is created and an Outline agreement is assigned as a source of supply to the PR.
    when the transation ME59N is executed using the PR's the system performs a mandatory check against the Tax code and tax code has to be entered against each service line to complete the transaction even though the tax code is maintained as a condition.
    In the above situation,system behaves in a correct manner for the
    transaction ME59 but fails for the transaction ME59N.
    Other terms
    MS_SERVICE_PACKAGE , ME59N , ME59 , WITHOUT_SCREEN , COPY_SERVICES
    Reason and Prerequisites
    The calling program of the transaction ME59N calls the function
    MS_SERVICE_PACKAGE of services with the wrong interface values.
    is it applicable for you?

  • Dump during creation of service entry sheet (ML81N)

    Dump during creation of service entry sheet (ML81N)
    Hi,
    ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.--> enter (here we get Dump ABAP RUNTIME ERROR "TABLE_INVALID_INDEX").
    This is happening only for some POs. What can be the problem?. Is this has something to do with SAP database ???
    - rahul

    Hi,
    it could have the cause that the note 1113220 was missing from your system or that data are inconsistent in your PO.
    If you implemented 1113220 and you still get the dump, please check in transaction ST22 the run time error long text to the dump:
    Parts:
    - How to correct the error?
    - Information on where terminated
    - Source Code Extract -> if you set a breakpoint before the line where the error occured, you could debug the process.
    - Active Calls/Events: if you have an own program displayed here, please check first your program wether it has caused the issue.
    If these do not help to find out the problem cause, please open a SAP ticket and include all of the relevant information regarding the dump.
    Regards,
    Edit

  • Service Request - Transaction type not appearing in IC Webclient Pop-Up

    Hi,
    The service request transaction types SMRQ and YMRQ do not appear in the webclient pop up when i click on Create Service Request.
    All the other transaction types are working fine.
    I have checked the entries in --> SPRO--> Solution Manager --> Capabilities --> IT Service Management --> Transactions --> Specify several transaction Types.
    The entries are SERVICE_REQUEST_TYPE / Seq No 1 / Field Value YMRQ
    Please find attached the 2 snips of error message.
    Thanks,
    Ritesh

    Hi Ritesh,
    Can you check,
    First with SAP all access so that we can rule out this
    second check if you have below setting in wizard or confirm in transaction type in SPRO i.e. channel CRM UI
    also these are active
    Thanks
    Prakhar

  • CRM 5.0 - IC WebClient - Transaction Issue

    Hi
    We have a Service Ticket Transaction as our main Transaction with Business Activity & Task as Dependant Transactions.
    I wanted to remove the dependant transactions (Business Activity & Task) so used: Define Business Transaction Profile for current Web Client Profile and deleted the 2 transactions.
    Unfortunately when I go into Follow Up Transaction I see I still have these 2 Transactions as possible options.
    Even went so far as to delete the Business transaction profile and create another, but still thes 2 Transactions are visible.
    Any guidance on thids will be richly rewarded.
    Regards
    Panduranga

    Hello Panduranga,
    First of all, make sure the buffer is not the problem.
    Refresh all buffers by entering /$SYNC in the transaction box. (Don't do this on a production system!!)
    If that doesn't solve your problem you can try this:
    1. Delete them as follow-up transaction in the copy control customizing.
    SPRO->CRM->Transaction->Basic settings->Copying control for Bus Trans.->Define copying control for Trans. Types.
    Delete here the follow-up transactions you don't want to see in the dropdownbox.
    2. Edit the follow-up transaction types and remove the channel 'ICW Interaction Center Webclient' so they are no longer usable in the WebClient.(Only CRM 5.0)
    SPRO->CRM->Transactions->Basic settings->Define Trans. Types.
    Select the trans. type you want to hide. CLick on "Allowed channels for trans. type" and delete the WebClient entry.
    This should solve your problem.
    <b>Reward points if useful!</b>
    Regards,
    Joost

  • Internal Order on Service Process Transaction

    Hi All,
    I have complex problem for which i need your guidence.Our Client wants is the internal order(r/3 side) for the service order created on the CRM using service process transaction.He has asked us to create a view using eewb trans having internal order field(aufnr).Now the problem  is how to get the internal order which is created at the r/3(automatically) side on the crm side.
    Any input would be of great help.
    Thanks
    Gaurav

    Hi Madhu,
    It is possible to create the return order as a follow up of the service confirmation.
    All u need to do is to maintain the copy control settings.
    I think it is better to copy the header level and not the items. Since ur service confirmation will have the items which are used and not the replaced items.
    The replace item can be entered directly in the return order.
    Wish the information is useful.
    Regards,
    Shalini Chauhan

  • SAP CRM Sales or Service or Marketing Professional Certification Exam

    Dear Experts,
    I have Experience in SAP ABAP and BW .
    I want to write SAP CRM Professional Certification Exam.
    But my Question is in which CRM module(Sales/Service/Marketing), I should do the certification.
    I mean which would be useful in  my career.
    Please let me know.
    Thank you.
    Regards
    Sam

    As you know in ERP, BW is cross system, in CRM happens the same, fristly I would ask myself in which ERP process where I was more involved. If I dealt with docuemtns (business transactions) I would go for SAP CRM Sales, if my vision is wider (MM, FI, CO) and not so focused on the SD area I would go for the services.
    In your situation I would go for the SAP Certified Application Associate - CRM Fundamentals with SAP CRM 7.0 EhP2 and forget about the "Professional" ones.
    https://training.sap.com/shop/certification/c_tcrm20_72-sap-certified-application-associate---crm-fundamentals-with-sap-…
    Cheers!
    Luis

  • ECC dien material to CRM product type service

    Hi Experts,
    I have a requirement to transfer material type DIEN in ECC system  to CRM product type Service.
    How can we do this?

    Hi Viswanath,
       I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
       Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
           Customer Relationship Management -->
                 Master Data -->
                        Products -->
                            Settings for Product Type -->
                                    Allow Upload for a Product Type.
       Now here select the check box for product type 02(service).
      To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
             Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
    //Bhanu

  • Prevent auto creation of service entry sheet

    Dear friends,
    I am using maint plan for creating service entry sheets automatically. I am using framework order where I give the validity period. Now when I try to generate service entry sheets through the plans after the end of validity period given in framework order,the system is allowing creation of service entry sheets. Is it possible to prevent a maint plan triggering a service entry sheet if the call date for the service entry sheet to be generated falls outside the validity period given in framework order.
    best regds
    Arun

    Arun,
    This doesn't suprise me...
    I'm not sure if there is a standard solution, but you could do this via user-exit/BADI (see [here|http://www.sapfans.com/forums/viewtopic.php?p=648307] under maintenance plans )
    PeteA
    [www.pjas.com]

  • Invoking Siebel CRM OnDemand Web Service via BPEL

    I'm trying to invoke a Siebel CRM OnDemand Web Service via BPEL. Basically, the Siebel guide says to post to a url with user/pwd to get a session ID returned from a cookie. I did that using embedded java and have the session ID as a variable in my BPEL process. My problem is with now calling the Web Service to perform the action. I have a WSDL from Siebel, but the guide says to use an HTTP post with the session ID in the url and the XML in the body. How do I do that? Shouldn't the WSDL handle that when I create the Partner Link? Do I need to use more embedded Java for this or can I set up a Partner Link? I created a Partner Link and it shows the methods I want to use, but I get the following error when I try to call it because I don't know where to add the session ID:
    <ErrorCode xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">SBL-ODU-01006</ErrorCode>
    <ErrorMessage xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">Internal Error: Session is not available. Aborting.</ErrorMessage>
    Any help would be GREATLY appreciated. Please let me know if you need more information.
    THANKS!

    The Siebel OnDemand web services can accept the siebel session token in the URL. Append ';jessionid={%sessionIdFromCookie%}' to the end point. Obviously this has to be done dynamically. Refer to the article called 'Making BPEL Processes Dynamic' (http://www.oracle.com/technology/pub/articles/bpel_cookbook/carey.html) pay particular attention to the 'Eliminating address dependency at run time' section.
    Peter

Maybe you are looking for