CRM Datasources for Activities & Business Partner Address

Hi Experts,
Can you please help in understanding following issue?-
For both these datasources-
1) 0CRM_SALES_ACT_1
2) 0BP_DEF_ADDRESS
I can see huge queue stacked up in CRM side in tcode SMQ1/RSA7.
But delta loads for these datasources bring exactly 1 millions records every day and this is happening since last month.
Even after delta load completes, I don't see corresponding decrease in delta queue entries.
-For second datasource delta queue entries are varying around 21+ million records
-For first one its varying from 5 million entries to 7 million entries
It started happening around the time when people from CRM team loaded data in huge amounts in CMR from other lagacy systems. Historical data loads & conversion in CRM is finished long time back but queues for some cases are still stuck at big numbers.
-->When I double click on queue, following is the status-
"NOSEND"
-->Further double click on it gives following two types of entries-
a) Transaction Recorded
b) Message Edited in Target System
Any helpful responses are welcome.
Thanks,
Arun Purohit

In R/3 you can check
WB2_PARTNER_ADDRESS_CREATE
also confirm in which system u need to create the business partner address.
Additionally you should also check out
BAPI_BUPA_ADDRESS_ADD
BAPI_BUPA_ADDRESS_CHANGE
BAPI_BUPA_ADDRESS_GETDETAIL
BAPI_BUPA_ADDRESS_GET_NUMBERS
BAPI_BUPA_ADDRESS_REMOVE
These may be helpful
Regards
Alok Pathak
Message was edited by: Alok Pathak

Similar Messages

Datasource for ISU business partner line items from DFKKOP & VBRK

Gurus,
I am looking for a datasource that will allow me to report on the individual line items from table DFKKOP. Basically credit/debit posting.
Bill from VBRK
Pay from DFKKOP
My research has led me to 0FC_BP_ITEMS which lacks VBRK
If there is another one please would you share with me.
thank you
Vijay

Why don't you create your own function module, ensuring you get the best possible index use. There is an index for contract account as well as one for business partner (at least here in ECC 6.0).
You just need to make sure your, or the standard function module's select statement has values for as many of the index fields as possible. If that's not fast enough you need to look at completely different possibilities.
As I usually say at that point: CPU is cheap...

Updating business partner addresses in CRM

Hi,
I Need to build a interface to update business partner addresses in CRM and assign it to a address usage. I can not find a suitable FM/BAPI for this purpose. Please advise me how to accomplish this.

Hi,
Where do you start to activate or configure Business Address Services in R/3 Business partners. Any links to user guides or startup documents will be greatly helpful.
Thanks very much
Cheers!
Padi

To Get the list of sales orders for a Business partner in CRM.

Hi all
Is there any Function module or BAPI to get the Sales orders for a Business partner in CRM. I know there is a BAPI to get the list of sales orders for a customer in ECC, but I donu2019t know how to get the list of sales orders for a Business Partner in CRM.
Can anybody tell me if there is an inbuilt function module or BAPI available?
If not how can I pick the sales orders of a business partner in CRM? Between which tables should I apply a join and write SELECT statement to get list of sales orders for a business partner in CRM.

Hi Jessica,
Try CRM function module CRM_BUPA_READ_ORDER_OBJECTS.
You'll get a table with the documents associated to that partner, where you can work on.
Kind regards.

Business Partner Address not populating

Hi,
The Business partner address field is not getting populated properly. We did a full load last week and still we could not see those addresses for certain business partners. However we were able to see the addresses in RSA3 and PSA too but not in the InfoObject. Can anyone throw a light on this issue. Anything will be highly appreciated.
Thank You,
Kishore
Edited by: Mayank Agrawal on May 11, 2010 10:41 PM

Hi,
As the data is getting populated successfully till PSA there should be no problem with the datasource.
Now, if you are using 3.X, then check for the transfer rules and update rules also check whether
any routines have been implemented and check the routine for any logic implemented in filtering/hiding/removing the address data. Try to debug the same using "simulate update" option over any datapackage.
If you are using 7.0 then check in the transformation for the mapping of fields or any routines implemented in
filtering/hiding/removing the address.
Regards,
Lakshminaraasimhan.N

Business partner address issue

Hi Experts,
I am involved in a CRM upgrade project from 4.0 to 5.1.
There is a typical problem.
For some business partner types, all the BPs are having double address maintained in the database,i.e., the address of the business partners are maintaned twice, though only one address has been entered for them during BP address entry.
So whenever we are working with tcodes like opportunity, it is prompting us to select one of the address from the pop-up. Whenever we are entering any partner value in the Partner tab, a pop up comes to select one of the address though both the addresses are same.
What I saw in ADRC table is there are 2address no.s maintained for the same address.
No clue why it is happening and how to rectify it.
Please help, its an urgent issue.
Regards,
Sangeeta

Hi,
You can write an executable report to determine the duplicate addresses and then delete them selectively from ADRC table using the API
BAPI_BUPA_ADDRESS_REMOVE
or using delete statement and then calling
commit_work
If you are using mobile sales application and having the same problem, then i would advise you to use Middleware concepts of Bdoc creation to create bupa_main Bdocs with the delta mode set properly for address and then trigger the mobile bridge programmatically to create the relevant sBdocs and replicate to the clients.
Also, if you would this problem in R/3, then you would need to trigger the bupa_main adapter object upload using request loads.
Reward if helpful.
Thanks,
Sudipta.

The visit frequency specified for the business partner

Hi.
Anybody knows how I can specificy the visit frequency specified for the business partner ?
CRM Mobile 5.0
Thanks.
Antonio.

ok, in transaction FPP3, for a given business partner, you can see the standard address and connection object address.
Is there any function module which can enable me to change the connection object address.

Business Partner Address Template Import

We are importing Business Partner Address Template showing error
"invalid item 'S' in enum 'BoAddressType' oBusiness Partner

USe
bo_ShipTo for ShipTo Address
bo_BillTo for BillTo Address

Business Partner address in GTS is "garbage" characters

We are testing our upgraded ECC 6.0 system and if a customer master in ECC has an international version maintained (Kanji) the business partner address in GTS (version 7.1) has garbage characters for that business partner. Do I need to make an adjustment in ECC to /SAPSLL/DEBMAS_SLL so that it pulls the address data from the customer General data screen (always maintained in English there) rather than from the International address screen?
These customers looked correct in GTS when we were on ECC 5.0.
Any thoughts?
Thanks.

Hello Vicky,
what is your highest support pack installed on ECC6 and on GTS? Did you search for notes?
General question, in case you wont transfer international addresses would be the GTS user happy not to have this information is GTS? For instance for preference mngmt it is required.
Cheers,
Gabriel.

Are there any bapi for create Business Partner

Dear Sir,
Do you know are there any bapi for create Business Partner in CRM
Please advise.
Thank you and best ergards,
Vimol

Dear Vimol,
BAPI_BUPA_CREATE_FROM_DATA ......SAP BP, BAPI: Create Business Partner
BAPI_BUPA_FS_CREATE_FROM_DATA .......SAP BP, BAPI: Create Business Partner
BAPI_BUPA_FS_CREATE_FROM_DATA2 .......SAP BP, BAPI: Create Business Partner
Hope this will help.
Regards,
Naveen.

Formatted search - Copy Business Partner address of active screen

Hello,
I am using a credit card addon that creates a tab in Business Partner Master Data labeled "Credit Card". On this tab, credit card information is stored for the business partner. This includes CC Name, CC Type, CC Cardholders Name, CC Number etc.
Credit cards are added on this tab, similar to an address being entered on the address tab. You have to click "Add New"
The business process is the following:
- CSR receives call from random customer (no BP data exists)
- CSR creates new BP
- Enters address for Bill to and Ship to.
- We are required by this addon to enter address on credit card for a third time. This is where we would like to streamline the process by creating a formatted search to copy the Bill to information from the Address tab, to the address information on the credit card tab.
This is where my dilema is. I am not sure how to capture the active record's information and bring it over to the credit card tab.
Does anyone have an recomendations?
John Sefton

From what I have noticed. You can create individual FMS and place them in the respective fields in the CC Tab. I could only test this on the BP Remarks and they seem to work.
For Address Name
SELECT $[$178.1.0]
For Street
SELECT $[$178.2.0]
For Block
SELECT $[$178.3.0]
Please enable system information from the VIEW menu for the other field co-ordinates

Find the SetCurrentLine in Business Partner /Addresses/ billing address

I am using B1 2004.2 B
In this below example:
            oBp.Addresses.SetCurrentLine(0)
            oBp.Addresses.AddressType = BoAddressType.bo_BillTo
            oBp.Addresses.AddressName = "Test1"
            oBp.Addresses.Add()
            oBp.Addresses.SetCurrentLine(1)
            oBp.Addresses.AddressType = BoAddressType.bo_BillTo
            oBp.Addresses.AddressName = "abc"
My requirement is to synchronies the BP master with another database.
I have some issues in Business Partner /Addresses/ billing address.
How to find the SetCurrentLine in oBp.Addresses.SetCurrentLine(XYZ)?
I see a Line number in CRD1 table, is that refers to the line number which I can use in oBp.Addresses.SetCurrentLine(xyz) ?
I tried it but it fails, the line number is based on the order in which the records are displayed in the BP/Addresses/ billing address Screen.
For example:
Address          Linenum
Abc               1
Test1               0
In the above example Test1 is added first and Abc is added second.
So the line number is 0 and 1.
When the records are displayed in BP/Addresses/ billing address Screen,
it displayes Abc first and Test1as second record.
So according to the screen display the Abc is line 0 and test1 is line 1.
But in the database the values are vice versa. So when I want to update the
Values using the DIAPI , I need to know the value for SetCurrentLine(XYZ)
How can I find it?

Line number in CRD1 table has nothing to do with SetCurrentLine.
SetCurrentLine index depends on the order of
the records displayed in BP/Addresses/ billing address Screen, which is sort by
Name.

Error while changing the PO BOX value for a Business partner

Hi Friends,
We are getting an error when we try to change the PO Box value for a Business Partner.
We have the dependency like when we give the value for the PO Box we also need to give the postal code value. And also we have a specific format for the Postal code. We gave both the values (a valid postal code) and try to save the details, then error message "The attribute GUID of Organization (a Contact Person is assigned to) of the Business Object contact person is not valid" is displayed. We have no clue why there is a conflict for the contact person details.
Can any one suggest the reason for this?
Thanks & regards,
Swarna Seeta

Hi Swarna,
You are getting this message not because you have entered wrong Post code .It will come even if you try to change some other field and save it. This is because on saving a business object, the framework tries to validate all the associated objects depending on the relation.In this case the data in the mobile client is either not present or is no longer valid.
Check if the field of the Business object which is being shown as invalid, has some data in the table. Check the combo associated to it and from where the combo is doing the validation. The table from where the combo is doing the validation does not have that data and so the value is invalid.
Also compare the number of entries in smokna1sht table in ides and in CDB.
Regards
Vivek

Set order block for new business partner

Hi experts,
I have the requirement to set the order block for a business partner (based on some attributes) at the moment when it will be created or changed.
I tried to use the BAdI BUPA_GENERAL_UPDATE where I am using the FM CRM_BUPA_FRG0050_READ/ CRM_BUPA_FRG0050_GET_DETAIL to retrieve the already existing status data and the FM CRM_BUPA_FRG0050_CREATE/ CRM_BUPA_FRG0050_CHANGE to add or change this data.
In the SAPGUI at least the update scenario (CRM_BUPA_FRG0050_CHANGE) is working.
In the WebUI application none of the both is working: In the create scenario the application is even dumping (SAPSQL_ARRAY_INSERT_DUPREC) but this dump happens in an other implementation of this BAdI!
In the BP update scenario nothing happens though the UI will be refreshed by some coding like
lr_bol_core = cl_crm_bol_core=>get_instance( ).
lr_bol_core->modify( ).
Is there something wrong or missing or is there a better BAdI to achieve this requirement?
Thanks for any help!
Regards,
Wolfhard
PS: I found another post which covers exactly my requirements but unfortunately without a solution...
[Re: Update of BP General Data during creation of BP]

Hi Bruce,
I propose to select the right value programmatically and then hide the original combo box (use the FromPane / ToPane properties - better don't disable it or make it invisble) and display a disabled EditText item which displays the pricelist which should be applied to new customers when the Form is switched to - or launched in "Add" mode.
When the form is switched to other modes than "Add" reactivate the original ComboBox...
HTH,
Frank

Count of number of campaigns executed for a business partner?

Hi all
I'm hoping someone can advise me on how to fulfil this requirement. Basically I need to find a way of ensuring that customers are only included in a maximum of five campaigns per month.
My current idea centres around
1) Creating an interaction object for each business partner every time they are included in an executed campaign
2) To execute a custom-developed program (or a BW query?) that will count the number of interaction objects created per business partner in the past month and write the count value to a marketing attribute called "campaign count" assigned to each business partner
3) Exclude any business partners with "campaign count" >=5 from the target group of future campaigns
I'm sure there's a cleaner and better way of doing this. Can anyone point me in the right direction?
Thanks
Mike

Greetings from ABAP General.
Please do not leave meaningless comments when closing age old threads only to make room for new ones.
The comment box can be left empty. Only fill it when you have something to say about the solution that might help the community.
Thanks
Thomas

CRM Datasources for Activities & Business Partner Address

Similar Messages

Maybe you are looking for