CRM_DNO_MONITOR not showing any records

CRM_DNO_MONITOR shows all the records if using the userid used in the configuration of the service desk but does not show any records if using any other user. We even gave SAP_ALL and SAP_NEW but still does not show any records. We've gone through all the threads in SDN related to this issue but no help.
Please provide any suggestions.
Lalit

Hi,
does not show any records if using any other user.
Check the following
1. If the user has a Business Partner (BP) number
2. If yes, whether his User name has been configured in Identification tab for the BP under Employee role
You can try this in CRM_DNO_MONITOR
1. Change the Status to "All"
2. Change the Layout
Regards,
Rajesh Kumar

Similar Messages

AP_Checks table not showing any records.

I am using oracle e-business suite 11.5.x. The table ap_checks is not showing any records at all. Please let me know as when i have to look into ap_checks and when into ap_checks_all table. The code that i am looking into is running for very long time and am sure the ap_checks is waht it is pointing to and it is correct.

Hi.
What is the result of?:
SQL>SELECT DISTINCT org_ig FROM ap_checks_all;
Octavio

VF46 is VF44 are not showing any records, while executing

Dear All,
Yesterday, we have notice that T. Codes: VF44 and VF46 are not giving any records, while executing.
Even if, we do PGI, its not reflecting in VF44.
Could anybody suggest the probable cause and solution?
Best Regards,
Amit

Hi,
you must first execute the transaction VF42, remove all fields marked (seems to do nothing, but it makes when you run the VF44 has data)
best regards

Server 2008R2 with AD DNS Panel not showing any records only shows the zone name

Hi All new to the Form. We have had this new domain controller running dns for a few years now and recently I went to edit some DNS records and found them missing in the DNS console the zone names are there but nothing is under the zones just one record
for the server under our AD domain. If i do a nslookup to this server it still displays the records as it should. It is also setup to forward the zones to a secondary server which is only pulling info from this Master 2008R2 server. Any ideas where i can try
and recover the records for my Zones.
Thanks

Hi,
According to your description, there are several possible reasons resulting in the DNS records disappearing.
1. If the aging and scavenging was configured in the DNS server, scavenging can cause records to disappear. Even Windows-based computers that have statically assigned servers register their records every 24 hours. Verify if the
No-refresh and Refresh intervals are too low. For example, if these values are both less than 24 hours, then we will lose DNS records. To view the settings, right-click the zone in the DC, click
Properties, click Aging.
2. Is there a DHCP server in your environment? DNS Dynamic Update Protocol updates to existing records fail can also cause them to be deleted by the scavenging process as aged records.
Also, event logs are helpful to isolating the issues. Is there any event logs in your computer?
For more details about DNS records disappearing, please refer to the link below,
DNS Records Disappearing and DNS Auditing
http://msmvps.com/blogs/acefekay/archive/2010/12/09/dns-records-disappearing-and-dns-auditing.aspx
Using AD Recycle Bin to restore deleted DNS zones and their contents in Windows Server 2008 R2
http://blogs.technet.com/b/askds/archive/2010/08/12/using-ad-recycle-bin-to-restore-deleted-dns-zones-and-their-contents-in-windows-server-2008-r2.aspx
Best Regards,
Tina

R12 Invoice Concurrent LOV not showing any Invoice after upgrade from 11i

Hi All,
We had 11i instance and then we upgraded to 12i.
Now one seeded program named "Invoice Print Selected Invoices" has a parameter called "Transaction Number Low"
, having LOV AR_RAXINV_TRX_NUMBER ,
does not show any record in R12.
When i opened LOV i could see following tables:
1. RA_CUSTOMER_TRX
2. RA_CUST_TRX_TYPES
3.AR_LOOKUPS L1
We are using this value set for one of our custom object too.
I was wondering if it is not pulling any data for seeded how it could it pull for custom objects.
I am a newbie in R12.
Any one has any idea why is it so , i can speed up my work and learn from your experties.
Thanks,
Swapnesh Parmar

Hi
Did you get the above sorted ? how ?
I have a similar problem with Selected Invoice Print where the Transaction Type parameter lov doesn't show any values. The seeded value set uses ra_cust_trx_types which (in R12) is a synonym for ra_cust_trx_types_all.
There is data on ra_cust_trx_types_all.
Pam

ALV GRID Report is not showing all records which is in internal table

hi all,
have one doubt. please clarify me. ALV Report is working fine since long tiem. But suddenly this report is showing few records only for the given input.   Example:   it_main table have 50 records, but output is showing only 10 records only. (we have not made any modifications in this report).
temporarily i have given excel output file from it_main table. excel file is showing all records.
here it_main have all the records. but output is showing few records only. it is not showing any error. i have tested with REUSE_ALV_LIST_DISPLAY function also. but it also showing same results(few records only.)
please give me some idea.
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_buffer_active          = 'X'
      i_callback_program       = sy-repid
      is_layout                = wa_layout
      it_fieldcat              = it_fcat
      it_events                = it_events
      i_save                   = 'A'
      is_variant               = wa_variant
    TABLES
      t_outtab                 = it_main
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE text-204 " 'Error in Display the list'
    TYPE 'I'.
    LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM.            .                    "DISPLAY_ALV_REPORT
Best Regards,
Srinivas

hi
Please study this program and give me suggestions.
ALV Declaration
DATA : it_events TYPE slis_t_event,               "ALV event
           it_fcat   TYPE slis_t_fieldcat_alv,        "Field catalog
           it_list_top_of_page TYPE slis_t_listheader,
           c_tabname TYPE slis_tabname   VALUE 'IT_MAIN'.
DATA : wa_layout TYPE slis_layout_alv,
            wa_event   TYPE slis_alv_event,
           wa_fcat    TYPE slis_fieldcat_alv,
           wa_variant TYPE disvariant.
START-OF-SELECTION.
PERFORM material_pass.
PERFORM data_retrieval.
END-OF-SELECTION.
PERFORM sub_display_report.
FORM sub_display_report .
DATA status(1).
IF r1 = 'X'.
    PERFORM build_fieldcatalog USING :
      '1' 'ERDAT'     'S.O DATE'             '' '10' 'X',
      '2' 'VBELN'     'SALE ORDER'           '' '10' 'X',
      '3' 'POSNR'     'SALE ITEM'            '' '6'   '',
      '4' 'BSTKD'     'CUSTOMER PO'          '' '35' '',
      '5' 'BEZEI'     'REASON FOR REJECTION' '' '40' '',
      '6' 'PLNUM'     'PLANNED ORDER'        '' '10' '',
      '7' 'AUFNR'     'PROD.ORDER.'          '' '12' '',
      '8' 'MATNR'     'MATERIAL NUMBER'      '' '18' '',
      '9' 'MAKTX'     'MATERIAL DESCRIPTION' '' '40' '',
      '10' 'WERKS'     'PLANT'                '' '4'   '',
      '11' 'KWMENG'    'SALE ORDER QTY'       '' '15' '',
      '12' 'VRKME'     'UNIT'                 '' '4'   '',
      '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13' '',
      '14' 'IGMNG'     'CONFIRMED ORDER QTY' '' '13' '',
      '15' 'GMEIN'     'UNIT'                 '' '4'   '',
      '16' 'MENGE'     'G.R QUANTITY'         '' '13' '',
      '17' 'SOBAL'     'S.O BALANCE'          '' '13' '',
      '18' 'PRDBAL'    'PROD.BALANCE'         '' '13' '',
      '19' 'GSM'       'GSM'                  '' '4'   '',
      '20' 'SIZE1'     'SIZE1'                '' '10' '',
      '21' 'SIZE2'     'SIZE2'                '' '10' ''.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename              = pathname
        filetype              = ftype
        append                = 'X'
        write_field_separator = 'X'
      TABLES
        data_tab              = it_mains
      EXCEPTIONS
        file_write_error      = 1.
    IF sy-subrc = 0.
      status = 'S'.
    ELSE.
      status = 'E'.
    ENDIF.
ELSEIF r2 = 'X' OR r3 = 'X'.
    PERFORM build_fieldcatalog USING :
      '1' 'ERDAT'     'S.O DATE'             '' '10' 'X',
      '2' 'VBELN'     'SALE ORDER'           '' '10' 'X',
      '3' 'POSNR'     'SALE ITEM'            '' '6'   '',
      '4' 'BSTKD'     'CUSTOMER PO'          '' '35' '',
      '5' 'BEZEI'     'REASON FOR REJECTION' '' '40' '',
      '6' 'PLNUM'     'PLANNED ORDER'        '' '10' '',
      '7' 'AUFNR'     'PROD.ORDER.'          '' '12' '',
      '8' 'MATNR'     'MATERIAL NUMBER'      '' '18' '',
      '9' 'MAKTX'     'MATERIAL DESCRIPTION' '' '40' '',
      '10' 'WERKS'     'PLANT'                '' '4'   '',
      '11' 'KWMENG'    'SALE ORDER QTY'       '' '15' '',
      '12' 'VRKME'     'UNIT'                 '' '4'   '',
      '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13' '',
      '14' 'IGMNG'     'CONFIRMED ORDER QTY' '' '13' '',
      '15' 'GMEIN'     'UNIT'                 '' '4'   '',
      '16' 'MENGE'     'G.R QUANTITY'         '' '13' '',
      '17' 'SOBAL'     'S.O BALANCE'          '' '13' '',
      '18' 'PRDBAL'    'PROD.BALANCE'         '' '13' '',
      '19' 'GSM'       'GSM'                  '' '4'   '',
      '20' 'SIZE1'     'SIZE1'                '' '10' '',
      '21' 'CUT1'      'CUT1'                 '' '11' '',
      '22' 'SIZE2'     'SIZE2'                '' '10' '',
      '23' 'CUT2'      'CUT2'                 '' '11' '',
      '24' 'SIZE3'     'SIZE3'                '' '10' '',
      '25' 'CUT3'      'CUT3'                 '' '11' '',
      '26' 'SIZE4'     'SIZE4'                '' '10' '',
      '27' 'CUT4'      'CUT4'                 '' '11' '',
      '28' 'SIZE5'     'SIZE5'                '' '10' '',
      '29' 'CUT5'      'CUT5'                 '' '11' '',
      '30' 'SIZE6'     'SIZE6'                '' '10' '',
      '31' 'CUT6'      'CUT6'                 '' '11' ''.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename              = pathname
        filetype              = ftype
        append                = 'X'
        write_field_separator = 'X'
      TABLES
        data_tab              = it_mainall
      EXCEPTIONS
        file_write_error      = 1.
    IF sy-subrc = 0.
      status = 'S'.
    ELSE.
      status = 'E'.
    ENDIF.
ENDIF.
PERFORM build_layout.
PERFORM build_events.
PERFORM sub_comment_build USING it_list_top_of_page.
PERFORM sub_set_variant.
PERFORM display_alv_report.
IF status = 'S'.
    MESSAGE 'Excel Output file Downloaded to Given Path' TYPE 'I'.
ELSE.
    MESSAGE 'Download Not Possible' TYPE 'I'.
ENDIF.
ENDFORM.                    " SUB_DISPLAY_REPORT
FORM BUILD_FIELDCATALOG
FORM build_fieldcatalog USING p_col_pos
                               p_fieldname
                               p_text
                               p_datatype
                               p_outputlen
                               p_col_freez.
wa_fcat-row_pos        = '1'.
wa_fcat-col_pos        = p_col_pos.
wa_fcat-fieldname      = p_fieldname.
wa_fcat-tabname        = c_tabname.
wa_fcat-reptext_ddic   = p_text.
wa_fcat-datatype       = p_datatype.
wa_fcat-ddic_outputlen = p_outputlen.
wa_fcat-key            = p_col_freez.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
FORM build_layout.
CLEAR: wa_layout.
wa_layout-window_titlebar   = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_layout-colwidth_optimize = 'X'.
wa_layout-totals_text       = 'CUMULATIVE'.
ENDFORM.                    "BUILD_LAYOUT
*&      Form BUILD_EVENTS
FORM build_events.
CLEAR wa_event.
REFRESH it_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_events
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc = 0.
    READ TABLE it_events INTO wa_event
         WITH KEY name = 'TOP_OF_PAGE'.
    IF sy-subrc EQ 0.
      wa_event-form = 'TOP_OF_PAGE'.
      APPEND wa_event TO it_events.
      CLEAR wa_event.
    ENDIF.
ENDIF.
ENDFORM.                    "BUILD_EVENTS
     -->P_IT_LIST_TOP_OF_PAGE text
FORM sub_comment_build USING it_top_of_page TYPE slis_t_listheader.
DATA ls_line TYPE slis_listheader.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = str1.
APPEND ls_line TO it_top_of_page.
CLEAR ls_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary = t_header[].
ENDFORM.                    " SUB_COMMENT_BUILD
*&      Form SUB_SET_VARIANT
      text
--> p1        text
<-- p2        text
FORM sub_set_variant .
CLEAR wa_variant.
wa_variant-report = sy-repid.
wa_variant-username = sy-uname.
wa_variant-variant = c_variant.
wa_variant-variant = p_layout.
ENDFORM.                    " SUB_SET_VARIANT
*&      Form DISPLAY_ALV_REPORT
*Display Report Using ALV GRID
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_buffer_active          = 'X'
      i_callback_program       = sy-repid
     i_callback_pf_status_set = c_pf_status
     i_callback_user_command = c_user_command
      is_layout                = wa_layout
      it_fieldcat              = it_fcat
     it_sort                  = it_sort[]
      it_events                = it_events
      i_save                   = 'A'
      is_variant               = wa_variant
    TABLES
      t_outtab                 = it_main
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE text-204 " 'Error in Display the list'
    TYPE 'I'.
    LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM.            .                    "DISPLAY_ALV_REPORT
*ALV Report Header
FORM top_of_page.
DATA : t_header TYPE slis_t_listheader WITH HEADER LINE,
         wa_header TYPE slis_listheader,
         t_line LIKE wa_header-info,
         ld_lines TYPE i,
         ld_linesc(10) TYPE c.
wa_header-typ = 'H'.
T_HEADER-INFO = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_header-info = str1.
APPEND wa_header TO t_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_header[].
ENDFORM.                    "TOP_OF_PAGE
here it_main internal table having all data. but output is showing few records only.
pl. give some idea.
Thanks & Regards
Srinivas.

FDM for PBCS - Drill Thru does not return any records in landing page

This is referring to the Data Management functionality in PBCS, not on-premise FDMEE.
I loaded in a file, for example:
Region|Product|Account|Amount
10|100|1000|9,000
10|100|1000|1,000
In FDM, I am using a multi dimensional map to derive another field. For example, if Region is 10 and Product is 100, than Department = 555.
so in FDM, I would end up with
10|100|1000|555|9,000
10|100|1000|555|1,000
Once loaded to PBCS, that loads in as:
10|100|1000|555|10,000
I built a form that shows this intersection, and then 'drilled to source'. When I get to the FDM landing page, there are no records shown. Is this because the derived field (department) does not exist in the source, or am I doing something wrong?
Appreciate any help.

Do you have access to the server logs by any chance?
Can you check the dimension class for your Scenario dimension in your target application? is it set to SCENARIO?
not showing source records is typically related to FDMEE not finding values in TDATASEG table.
HTH

Team calendar My trainings not showing any DATA on Production Server

Dear ALL,
We are facing very critical issue on Production Server.
We have two Id's for which Team calendar, My trainings is not showing any DATA .
We observed that this is happening to both the users who had MSS role previously..
now for your information we have check the following things already .
1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
2. The authorization. Is correct..
3. We got help from SAP..But not solved problem.
Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
Let me know ASAP.

Hi,
All r correct in both system .............even following things i have checked .................which i got from reply from U.
01.07.2009 - 11:29:52 UK - Reply by SAP
Hello Pinki
You need to check the settings in your different systems
the #group of organizational views# MSS_LTV_EE is maintained
for the Team Calendar and MSS_LEA_EE for the request mode.
Check the IMG step
Integration with Other mySAP.com Components ->
Business Packages/Functional Packages -> Object and Data Provider
-> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
MSS_LEA_EE (Leave Request: Employee Selection) the two
organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
These organizational views are defined in IMG step #
#define Organizational Structure views#:
They have the following Object selections:
MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
Also check these
Please use the evaluation path "ORGASS".
To change the evaluation path kindly go to the view V_TWPC_V , look for
the ESSDIR view and double click on the ESSDIR.
Please check the above customisation,
Tthe evaluation path SAP_MANG is used to determine
the root objects. "Eval.Path for Root Objects" on the detail
screen in the view V_TWPC_V "View Definition" for further information onthis topic).
Also check the customisation using
report RHSTRU00
In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
01 should exist. Please correct it as well
and ensure that
In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
a record for the group 'ATTEND'.
Hope this will help you.
Best Regards,
Siddharth Rajora
HCM
SAP LABS India

Issue regarding LSMW, not showing all records after Read Data

Dear Experts,
Plz help.. I need to configure a LSMW for ROH material.. so I made recording, n then create a structure.. accordingly.
the problem is.. at the time of reading data from .txt file.at the step of Display Read Data it showing only 50 records, rest are not displaying.. but not showing any error.. so my question to our expert that is their any limitations for reading data... if their.. then how could it be elasticated...
plz suggest..
regards,
sandy

the read step has a selection screen where you can define from which to which record you want read.
make sure this selection is empty for a test.
Further check if your source file has more than 50 records.
then make sure that you really read this source file and not any other version (check path and file name in step 7 of LSMW)

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

How do i update 10.5.8 if my macbook does not show any software updates?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

IOS 7 Calendar Day View does not show any all-day events ?

Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.

Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

CRM_DNO_MONITOR not showing any records

Similar Messages

Maybe you are looking for