CRM equaling for ECC FM SAP_CONVERT_TO_XML_FORMAT

I am not able to find FM SAP_CONVERT_TO_XML_FORMAT in CRM. Can any one suggest me any other class or alternative FM is there in CRM?

Its because of the mode you selected to execute. ie you are executing it in SE37.
Try the FM in your program (run time). It will work.
Cheers,
Thomas.

Similar Messages

CRM 7.0 = ECC 6.0 Upload: Filter criteria for BUPA_MAIN

Dear Experts,
concerning filtering of BUPA_MAIN in CRM 7.0 => ECC 6.0 Upload we have already learned from SAP (to our surprise) that the only way is to redefine publication BUPA_MAIN as "simple intelligent" (Standard is simple bulk). BUPA_MAIN as "simple intelligent" offers a couple of fields (e.g. partner_no, is_customer) which can be defined as filter criteria.
We have the requirement to filter by a bp status field which is not part of this set. By the way, we expected the filtering in object management (TX R3AC1, filters are only valid for ECC=>CRM Dowload) or at least in the TX CRMC_BUT_CALL_FU by registrating a ZFunction module in CRM outbound for BUPA_MAIN. Under certain circumstances the later leads to errors in the subsequent middleware processing.
Has anybody a similiar requirement or does face the same problems?
Thanks for your help.
Regards, Mark

Hi Mark
Please put this request in the correct forum of CRM Middleware.
I am sure your will get the right help from the middleware experts.
Regards

Replication Issue for ECC BP to CRM BP

Hello Experts,
I am trying to Create a BP in ECC with transaction BP, but whenever i save the BP in ECC, the BDOC gets stuck in CRM with the error message that 'Grouping CUBP does not exist',
Everything was working fine before, but recently we had created a copy of Account Group 001 for ECC customer for a Z accoutn group, we made all the required settings in ECC in transaction PIDE and then ran the inital load 'DNL_CUST_KTOKD' the new account group did come over to CRM in table CRMC_T077D and the account group is working fine, the customers created in ECC are getting replicated to CRM, but now the BP created in ECC does not gets replicated to CRM and give the above stated error message in the BDOC.
PLEASE HELP!!

Hello Shoaib ,
In the CRM as well as ECC system in the customising SPRO :
Cross-Application Components   >SAP Business Partner
Business Partner   >Basic Settings
Number Ranges and Groupings   > Define Groups and Assign Numbers Ranges
    > CUBP Grouping could be missing in any one of the systems. Could you please check this.
Thanks & regards,
Krishnen

Error in Transaction launcher - CRM 5.0 / ECC 6.0

Hello all,
I am trying to pull one ECC 6.0 transaction into CRM 5.0 IC webclient through launch transaction.
When I click the link in the NavBar, I get the logon box for ECC system but after I enter the logon details below error message is getting displayed.
The transaction call failed
Reason:: Function module EWB_PROC_CREATE does not exist
But this FM exists in both CRM and ECC systems.
Any ideas about this error message?
Best Regards,
Nag

Hi Sudeep,
Thanks for the reply.
I am not sure about the EEWB extensions.
Initially I created a launch transaction using BOR method the path of the ECC logical system is given as below.
http://ssever:port/sap/bc/gui/sap/its/CRM_CIC_RABOX
But now I've changed the path as: http://ssever:port/sap/bc/gui/sap/its/CCMP_RABOX
and it is working now. I am able to pull the transaction from ECC although some other data flow issues are there.
So looks like there is some issue with the serivce CRM_CIC_RABOX in our system.
Thanks to all,
Nag

Process to Replication of CRM BP to ECC(REFX) as BP

Hi All,
I have a situation to replicate CRM Business Partners to ECC as Business partners for CRM Intergation with REFX module.
I have successfully replicated the CRM BP to ECC as Customer. but i'm unaware of CRM - REFX BP replication.
As we define PIDV settings in ECC for Replicating BP from CRM to ECC as Customer, is there any middleware configuration settings to replicate CRM BP to REFX BP?
I will be thankfull if someone provides the documnetation...
Thanks and Regards,
Arun

Hi All,
I have a situation to replicate CRM Business Partners to ECC as Business partners for CRM Intergation with REFX module.
I have successfully replicated the CRM BP to ECC as Customer. but i'm unaware of CRM - REFX BP replication.
As we define PIDV settings in ECC for Replicating BP from CRM to ECC as Customer, is there any middleware configuration settings to replicate CRM BP to REFX BP?
I will be thankfull if someone provides the documnetation...
Thanks and Regards,
Arun

Why we need crm middleware for material replication?

Hi Experts,
Why we need CRM middleware for material replication from ECC to SRM when we can do the vendor replication from ECC to SRM with ABAP report? IS there any technical limitation?
Thanks and regards,
Ranjan

Hello,
Vendors and locations, for example, you can replicate from ECC to SRM using ABAP reports.
However, if you want to replicate the following information, you should use the middleware:
- DNL-CUST-BASIS3 - Basis CRM online
- DNL-CUST-PROD0 - Material number conversions
- DNL-CUST-PROD1 - Product : categories
- DNL_CUST_SRVMAS - Customizing: Service Master
- MATERIAL - R/3 Material Master
- SERVICE_MASTER - R/3 Service Master
Check note 872533. It provides more information.
Regards,
Ricardo

View CRM transaction in ECC through document flow

Hi ,
we have a requirement where we need to show a CRM document in document flow of another document in ECC. There is no replication for these documents. I also need to display the CRM document in ECC when it is selected from document flow.
Can any one please help on this?
Regards,
Sharf.

This is all going to be custom development but here is the idea:
In theory, you can read the docflow of the CRM parent document (which is in ECC) by an RFC into CRM and get the subsequent documents. The major assumption I am making here is simple: the docflow is established between the parent and the child in CRM.
Once you have the docflow, you can show the document numbers in the R/3 and again access the individual documents and show relevant header and item details of the "CRM" docment in the ECC screen.
FYI, an exactly "reverse" feature is available in CRM Web Channel (E-Commerce application). Here, you can see the Invoice details in the web, even though the billing documents are never replicated from ECC. We even see the document flow about the Shipping documents (Deliveries).
Easwar Ram
http://www.parxlns.com

View CRM document in ECC through document flow

Hi ,
we have a requirement where we need to show a CRM document in document flow of another document in ECC. There is no replication for these documents. I also need to display the CRM document in ECC when it is selected from document flow.
Can any one please help on this?
Regards,
Sharf.

This is all going to be custom development but here is the idea:
In theory, you can read the docflow of the CRM parent document (which is in ECC) by an RFC into CRM and get the subsequent documents. The major assumption I am making here is simple: the docflow is established between the parent and the child in CRM.
Once you have the docflow, you can show the document numbers in the R/3 and again access the individual documents and show relevant header and item details of the "CRM" docment in the ECC screen.
FYI, an exactly "reverse" feature is available in CRM Web Channel (E-Commerce application). Here, you can see the Invoice details in the web, even though the billing documents are never replicated from ECC. We even see the document flow about the Shipping documents (Deliveries).
Easwar Ram
http://www.parxlns.com

What size of HARD DISC need for ECC 6.0, BI 7.0, SOLMAN 4.07.0), CR

Hi Gurus....
              Can any please tell me what are the standard hardware required for ECC 6.0, SOLMAN 4.0 , BI 7.0, CRM 5.0 AND SOLMAN 7.0
          note: All above servers with both ABAP and JAVA stacks.....
   thanks in advance....
Regards,
BBR.

BBR,
The different SAP Production will require different size.
Product     RAM(Minimum)           Recomended           HDD
ECC 6.0 -    2 GB                          4 GB                       250 GB (IDES)
SOLMAN 4 2 GB                          4 GB                       40-45 GB
BI 7.0          2 GB                          4 GB                       40-45 GB
For furter details please refer to SAP Quick Sizer at
sevice.sap.com/sizing
Thanks
Lokendra

Difference between SAP/APO/DP and the SAP/CRM solution for forecasting

Hi,
Can you please help me identifying the main differences between SAP/APO/DP and the SAP/CRM solution for forecasting? Advantages and disadvantages?
Thanks a lot

Hi LCD777,
Forecasting at DP & CRM are altogether at different entities. CRM involves webbased data transfer mechanism tool whereas DP is database/livecache driven tool.
In CRM, you dont get optimised solution of forecasting out of it whereas in DP you can get as much as
optimised solution & flexibility as per your requirements.
DP is majorly a forecasting tool where in huge statistical method functionalities are embedded in
whereas CRM is majorly a transactional tool wherein it involves gathering of forecast data and executing it.
Typically, CRM will be integrated with DP containing GATP environment & ECC so that DP will plan for forecast data, ECC system drives sales order data & GATP calls for availability check and finally
the forecast execution& transactions will be controlled by CRM
Regards
R. Senthil Mareeswaran.

Initial download from crm 5 to ecc 6

Initial Download of ECC 6 customer_main to CRM works well but mapping of bupa_main from CRM 5 to ECC 6 didn't work.
In R3AS I got an short dump:
GETWA_NOT_ASSIGNED_RANGE
So I tried CRMM_BUPA_MAP to send single customers and I got that error.
Partially send, receivers have errors:
I have checked all the fields in the ecc6 settings and crm5 also.
it is very urgent bec. iam at client side.

Hi Devi,
Ya now its clear. So basically you are dealing with the data exchange between the R/3 customer to CRM business partner.
As you mentioned that the CUSTOMRE_MAIN load is successful
and that means you have already done the account group to calssification mapping in R/3 transaction PIDE from R/3 to CRM. Pls check the same transaction for the data flow from CRM to R/3. Also check the number range assignment. For more detail check the best practice guide C03.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Error in replication sales order from CRM 5 to ECC 6

Hi,
I am new to the middleware
When I am trying to replicate the sales order from CRM 5 to ECC 6, i found the following error in SMW01 R/3 adapter is called
Message no. CRM_ORDER_MISC024
I am unable to track what may be the problem and even I have checked the SMQ1 & SMQ2 in both CRM and ECC but nil.
Can anybody help me out?
Thanks in advance

Hi Binu,
Try check also the SMQ1 & SMQ2 on R/3 when you start trigger the
document transfer from CRM to ECC. If you cannot see any similar document
appear here, seems like your Middleware filter has not properly set.
Check Middleware filter for document transfer, if I am not mistake, the object
is SALES_DOCUMENT.
Just check, if there filter which block the document to be sent to R/3.
Hope this helps.
Gun.

Billing of CRM Contract   in ECC

Hello Experts
Can we do the billing ( periodic billing )   for a CRM contract in ECC ? .
I am aware of the CRM contract being billed in CRM .
Please clarify if it is possible   and also the   procedure for the same ( Billing of   CRM contract in ECC ).
Early response is   appreciated.
Regards
Raj

Hello Rajesh,
Yes it is possible. You have to maintain some synchronization settings iin CRM and ECC as well mapping the item categories from CRM into ECC.. Read the following link for a start. Good Luck!
http://help.sap.com/saphelp_crm70/helpdata/en/46/94adc087bd13eae10000000a155369/content.htm

Master CD for ECC 5.0 MSSQL 64k

Can somebody provide me the label of Master CD for ECC 5.0 MSSQL 64k.
I find the way SAP provides this information in SAP Market place utterly confusing

Hi
According to the Master Guide SR2 of SAP ERP 6.0,
the media label you are looking for is as followings.
SAP Business Suite 2005,
Installation Master for: SAP
NetWeaver 7.0 SR2, SAP ERP 2005
SR2, SAP CRM 5.0 SR2, SAP SCM
5.0 SR2, SAP SRM 5.0 SR2
The detail of media you can see "Master Guide" pdf.

EEWB BUPA - relevance for ECC

I try to enhance BP in CRM 5.0 with EEWB. These fields should be also generated in ECC 6.0.
EEWC customizing is correctly. Enhancements for Business Transaction works fine.
When I generate the extension via wizard in CRM everything is ok, I have only a flag for BW relevance, but not for R/3.
Any idea?

Hi Andreas
You need to maintain the settings for the logical systems for ECC (and similarly for Mobile), if you want to generate fields in the connected systems. Note 649336 and following is describing what settings you need to make in order to have the boxes displayed.
Hope this helps,
Kai

CRM equaling for ECC FM SAP_CONVERT_TO_XML_FORMAT

Similar Messages

Maybe you are looking for