CRM EXTRACTION PROBLEM
Hi guys,
In DETAILS of the MONITOR screen, i am getting errors in the extraction part.I checked the connection using SM59 Tcode. That part is perfect. In transfer part it is showing some error as 'Request IDoc : Application document not posted '
Please Guide me,
Thanks.
In LO EXTRACTION (eg: 2lis_11_vahdr) I load the data in to my info cube, after that i want to change my data source,i.e append some extra fields, then replicate the data source.Now how can I change my transfer rules with new fields, or, will I have to create a new info sourse for this changed data source? how can I create a new info sourse. Some body please help me?
Similar Messages
-
Hello Guys,
I need to know what are the steps for BW CRM extraction. I know this has been asked for a lot of times, and I have read some threads before I am posting this question.
I know that we have to activate the BW meta data for the CRM to for the extractors to work, but somehow the steps mentioned on the various thread do not seem to be adequate.
Can we have one thread where we talk all about BW CRM extraction ? Right from step 1. Can someone please post it please ? Also, if we can talk the implications (of what goes in side when we execute each step) it would be great. Its also good to get a technical understanding of the thing works.HI Mukund,
Steps for Extracting data from CRM:
Configuration Steps
1.Click on ->Assign Dialog RFC destination
If your default RFC destination is not a dialog RFC destination, you need to create an additional dialog RFC destination in addition and then assign it to your default RFC destination
2.Execute Transaction SBIW in CRM
3.Open BC DataSources.
4.Click on Transfer Application Component Hierarchy
Application Component hierarchy is transferred.
5.SPRO in CRM .Go to CRM->CRM Analytics
6.Go to transaction SBIW-> Settings for Application specific Data Source ->Settings for BW adapter
7.Click on Activate BW Adapter Metadata
Select the relevant data sources for CRM sales
8.Click on Copy data sources
Say yes and proceed
9.Logon to BW system and execute transaction RSA1.
Create a source system to establish connectivity with CRM Server
A source system is created. (LSYSCRM200)(Prerequisites: Both BW and CRM should have defined Back ground, RFC users and logical systems)
10.Business content activation for CRM sales area is done
11.Click on source system and choose replicate datasources.
Which Datasource using....?
Hope this Help
Regards,
Raj -
Regarding CRM extraction.....
Hi Gurus,
I have few questions regarding CRM extraction.
Q1: If we enhance a CRM transactional Datasource, do we have to write the ABAP logic in SE19 or CMOD or both?
Q2: If we enhance a CRM MasterData Datasource, do we have to write the ABAP logic in SE19 or CMOD or both?
Q3: What is the significance of the T-CODES BWA1, BWA5, BWA7 ?
Q4: When do you implement the BADI CRM_BWA_MFLOW and when do we implement the BADI CRM_BWA_SFLOW and when do we implement both of them?
Q5: What is the significance of the function module CRM_BADI_GET_BDOC? Is there any other function module which is used in CRM extraction that has to be implemented in coding?
Please throw some light on my questions.
Thanks
Nice day
Regards
SamHI,
For Delta Extraction of CRM to BI pelase follwo the below steps
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services): BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
info source > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)
start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Hope It helps You.
Regards,
Nagaraju.V -
Hi All,
We are planning to setup the CRM to our BI 7.0 system.
Can any one please provide me the step by step procedure what are all the steps I have to do in CRM system to enable/activate the Data sources.
And also please provide me the steps to be followed to enable the delta for particular data source.
I worked on LO extractors and FI but I m new to CRM extractions.
This is bit urgent.. so can anyone help me in this.
Regards,
Shanthi.Thanks Vijay, Reddy and Hari for fw the links.
I gone through all the links and the previously posted threads.
What I understood is in CRM system we have to do following settings:
1) Go to RSA5 and install the required datasource and activate it.
2) Come to BW system replicate the data source to BW side and assign it respective BW objects.
3) and fetch the full load records to BW system.
4) You can able to view the data in RSA3 in CRM system.
But what I couldn't able to understand is what for we are using BWA1 , BWA5 and BWA 7 transactions in CRMS system.
And are we able to do any setting or activation to fetch the delta records to BW side.
Please could any one clarify my doubts.
Thanks In advance.
Shanthi. -
Any progress on the ACR 7.3+ Bridge repeat thumbnail extraction problem?
Any progress on the ACR 7.3+ Bridge repeat thumbnail extraction problem?
It was very good news that the cropped lens-correction repeat extraction bug was fixed in 8.2, but this newer problem, surfacing in the ACR 7.3 update (and still present in 8.2), is causing a bigger headache than the older bug for some users of Bridge.
Unfortunately, I have been unable to identify a trigger for the condition, which is proving very difficult to recreate reliably, other than it very definitely being introduced with ACR 7.3. Adobe's Steve G told the Bridge forum that the 7.3+ problem had been recreated by Adobe, and was being investigated along with the other (now solved) problem. Has any progress been made? Or is it still a mystery?Been there, done that:
http://feedback.photoshop.com/photoshop_family/topics/unneccesary_bridge_thumbnail_and_pre view_extraction
They know about it, they just don't know how to recreate it.
Best thing we can do is reliably recreate the fault. My workaround is to only enable Lens Profile Corrections when necessary, as it is a combination of that and some other factor(s) which seems to trigger it.
If you read all the discussions, you'll see that there are two bugs which produce the same symptoms. One introduced in probably ACR 6.1, whichg was fixed in 8.2; and the other was introduced in 7.3 and is ongoing. -
Hi,
I have my standard DS and I am able to see the data in RSA3 but when I do a delta load it is returning 0 from 0 records.
How do I enable delta for this DS (This is a CRM DS)
Thanks & Regards.Hi Ganesh,
There might be different issues related to this like authorization etc.., Always make sure that data source is activated in BWA5.
Check these links:
CRM data to BW .. some issues
No data when extracting using 0CRM_SRV_PROCESS_H
Hope this helps.......
Rgs,
Ravikanth. -
CRM - BI Data Extraction Problem
Hi Gurus,
We have CRM 2007 and BI 7.0. We have activated all the DS and also replicated them in BW and also activated all the necessary Infocubes in and Transfer rules etc.
In CRM, the data is available in service order header table but when I check in RSA3 for the 0CRM_SRV_PROCESS_H Data Source, it displays as 0 records.
Hence I am unable to load the data into BI.
And when I try to check the Master datasources in RSA3 then, the data is available, but I am unable to extract to BW.
Would be of great help if someone can guide me if we missed any necessary settings or configurations that have to be performed in CRM or BI system.
Thanks & Regards.Hi,
There is one additional step that you have to performat CRM side before replicating the data source.You have to enable the metadata then only u can extract data from CRM.
*Follow the below steps:*
Go to SBIW in CRM, in the tree choose metadata adapter.Up on clicking it will populate the list of datasources,find your datasource and select the check box besides you datasource and save this.
Now replicate you datasource again, activate the transfer rules by using the program RS_TRNSTRU_ACTIVATE_ALL.
Now try the load it will work.
Cheers,
Upendra. -
Hi All,
We have a data source called 0BBP_TD_CONTR_2. It collects data from SRM related to contracts. We have activated it by using rsa5 transaction and extract data from SRM to BW. It works fine.
However, when we tried to extract data again we came across with an error on BW side pointing out the source system. When we control the SRM side:
On RSA6: Data source is active
On RSA3: When we extract data it gives an error: No corresponding product found.
When we double click this error: it says: No corresponding product found Message no. COM_PRODUCT004
So we can not see the result of RSA3.
Is there anyone who came across with such an error?
Thanks in advance
#Bill J.Hi Bill,
Please take a look at the following SAP Note:
I think it will also apply to SRM system.
The error message "No corresponding products found" occurs if the product GUID from the R/3 System is not the product GUID under which the product has been created in the CRM/EBP System.
This may have the following reasons:
You create the product data of a CRM/EBP System by copying the product data of a different CRM/EBP System.
If this different CRM/EBP System is linked to a different R/3 Back-end System, the products can no longer be identified during another download.The reason for this is that the different R/3 Back-end System has assigned other product GUIDs than the original R/3 Back-end System.
In the R/3 Back-end System, material data - including the contents of table NBDSMATG16 - is overwritten with a copy from a different R/3 Back-end System.If material data from the first R/3 Back-end System has already been transferred to a CRM/EBP System, the corresponding products can no longer be identified in the CRM System during a new download attempt.
You linked the CRM/EBP System to a different R/3 Back-end System.This leads to the above problem if the same logical system is assigned to the new R/3 Back-end System as to the original R/3 Back-end System.
You load materials from two R/3 Back-end Systems to which the same logical system is assigned respectively into a CRM System.
Solution
The logical system of an R/3 Back-end System must not be changed if a download from this R/3 Back-end System has occured.
The creation of product data in a CRM/EBP System should not occur by means of a client copy. When you set up a new CRM/EBP System, the products should be created by means of a download from the connected R/3 Back-end System.
If it is required to make a client copy, for example in the cause of an upgrade test, the R/3 Back-end System must be copied to the new CRM system landscape as well.In the new CRM system landscape, you must not rename any logical systems.However, all RFC destinations have to be redefined in such a way that there is no longer a connection to the original system landscape.
If this restriction is too strict, you must not change the logical system directly in table T000, but by means of Transaction BDLS which must run three times in this process:
o in the R/3 Backend: LOGSYS OLTP old -> LOGSYS OLTP new
o in the CRM/EBP System: LOGSYS CRM/EBP old -> LOGSYS CRM/EBP new
o in the CRM/EBP System: LOGSYS OLTP old -> LOGSYS OLTP new
In a production CRM/EBP System, the data should always be loaded from the corresponding production R/3 Back-end System.That is, the product master data should not be transferred from a different CRM/EBP System by means of a copy.
Entries of table NBDSMATG16 of an R/3 Back-end System must not be changed by a copy from a different system.That is, entries in this table must never be changed.
You must not replace the R/3 Back-end System of a CRM/EBP System with a different R/3 Back-end System just like that.When you replace the R/3 Back-end System, a corresponding new CRM/EBP System should be set up as well.
If the setup of a new CRM/EBP System is not possible in this case, you have to copy the contents of table NBDSMATG16 from the original R/3 Back-end System into the new R/3 Back-end System.You can only do this in turn if no product data exchange with the new R/3 Back-end System has occurred, that is, if table NBDSMATG16 does not contain any entries yet.
Then you have to assign the same logical system that was assigned to the old R/3 Back-end System to the new R/3 Back-end System.In addition, there must not be a connection or (Customizing) setting that points from the CRM/EBP System to the old R/3 Back-end System or vice versa.
Recommendation:You should delete the definitions of the RFC destination (Transaction SM59).
If the problem described above occurs because you do not follow the above recommendations, a data inconsistency exists which has to be analyzed by SAP.From the product master point of view, you can solve this problem by deleting the affected products and creating them again by means of a download.
However, this procedure is problematic or cannot be carried out in production systems if references to the affected products are already made in other objects (for example, in orders). In this case, these references would refer to product GUIDs that no longer exist in the system.
In such cases, individual solutions (which are quite extensive) must be found.
If several R/3 Back-end Systems are connected (currently, this is only supported in EBP Systems), different logical systems must be assigned to them
let me knopw if you have any issues or questions
Regards
Satish Arra -
CRM extraction (0CRM_SRV_CONFIRM_I)
Hi all,
we've extended data source 0CRM_SRV_CONFIRM_I with some additional fields, with amongst others a date field (ZZ_START_DATE type DATS length 8). This seems to be working just fine on development and production. However, on Quality (QAS) we seem to have the problem that in BW the date field is no longer filled. So I looked at the extractor in the source system (CRM) with RSA3. Here the field is filled correctly.
According to the functional BW consultant, the versions, field mapping and so on is exactly the same on all three systems (Development, QAS and production).
Is there a way to debug the extraction from within BW, or another way to find out what the problem could be / is?
By the way, I'm an ABAP developer with just a little knowledge of BW!!
Kind regards,
Micky.Hello Micky,
You have check the RSA3 of QAS and getting the data there.
Could you please Check PSA and check if you are getting data there as well. If yes then check your InfoObject which is going to store that Date in QA whether it is exactly same as DEV and PROD,
IF No then check again in RSA3 , make sure QA user exit is same as DEV & PROD.
you can debug from BW.
1. Go to Monitor Screen under detail Tab
2. Select Data Package (Right Click) and Simulate the load.
3. Debug it, Check Source data and Target Data Options.
Hope it helps.
San. -
Hi,
I'm using 0crm_srv_process_i datasource . While I'm trying to extracting data from CRM to BW (for some dates or some data selections) I found all data showing under one Sales Group in BW,So I checked in RSA3 in CRM than I found all data showing under one Sales Group ,so that effects problem while extraction in BW also. I checked my mappings in BW , it running fine so no problem in my BW.
Please help me to resolve this issue.
Note: My delta was running fine. Daily I'm getting correct data.
Edited by: nsrikanth1.abm on Feb 29, 2012 7:15 AM
Edited by: nsrikanth1.abm on Feb 29, 2012 7:24 AM
Edited by: Joaquin Fornas on Feb 29, 2012 8:59 AMsame problem on windows 2000 as well fedora. Can anyone help?
-
0CRM_OPPT_H Infosource extraction problem (no transfer rules from Content)
Hi there,
I'm having a problem with 0CRM_OPPT_H infosource on BW 7.0 and Content version 703 SP9.
After activating the object from content there is no transfer rules for header infosource, item infosource is ok and I'm getting data. I've tried to created a DTP from scratch but I'm not geting data from source system. I've tested getting data from source system with RSA3 extraction test and it's working fine.
I've been checking on sdn and tested changing authorizations but it doesnt work.
Any ideas ??? It's normal I'm not getting transfer rules from content? Why I can not assing Datasource 0CRM_OPPT_H to inforsource 0CRM_OPPT_H??
Thanks in advance,
Regards,
CarlosI believe I had the same problem as you did. When you're installing the Business Content in BI you have to make sure BI knows which source systems you're installing BC from.
Go to RSA1 -> BI Content
In the Edit drop down menu choose "Source System Assignment"
Make sure your CRM and BI system are checked in the window that pops up. Try collecting for the 0CRM_OPPT_H again and see if the objects you're missing show up this time. If that doesn't work search through the specific object types for items you're missing. For example, search transfer rules for "0CRM_OPPT*" or just "0CRM_OPPT" (i'm not sure if the wildcard is valid in this instance) and see if what you're looking for shows up in the list.
Hope this helps. -
0CRM_LEADS_H EXTRACTION PROBLEM?
Hi,
we are using CRM 5.0 and BI7.0 systems,i'm trying to extract 0crm_leads_h datasource,i'm using BI content Infocube and DSO after transformation and DTP
i ran infopakage in monitor it showing waiting status.just 85 records was avaliable in CRM system under this datasource.In CRM source system ,right click on CRM system clicked on check options the following error was occured"Result of the destination check: Password logon no longer possible - too many faile d attempts RSAR 375 "
Please anybody help on this issuse.
Thanks&Regards,
Vasu.Hi Vasu,
Looks like remrote user password has been locked. goto T CODE SU01 and unlock your remote user,generally it shud be ALEREMOTE. After unlocking check your source system status and load the data.
Hope it shud solve your problem.
Regards,
Jagadeesh. -
RG registers and PLA registers - Extraction Problem
Hi,
We have updated balances in table J_2IACCBAL for initial entries for RG registers and PLA registers but the same is not available for extraction in J2I5.
Could you please advise what the problem is?
Regards
Santosh HegdeHi Prasanna,
We have updated the balance as on 31.03.2007 as per SAP Help. We tried extracting as on 31.03.2007 as well as 01.04.2007.
Cut over data is as on 31.03.2007 and golive date is 01.04.07.
Pls help
Regards
Santosh Hegde -
Extraction Problem- while filling the setup table
Hi all,
I have a problem when i fill the setup table for LO cockpit Extraction on any SD datasources (2_LIS_VAHDR,2lis_13_vdkon etc.,). i am done with LBWQ successfully. i also verified the datasources in RSA6. They are in active status in RSA7-delta queue.
After i submit the request to fill the setup table, i am getting
"datasource 2_LIS_VAHDR contains data still to be transferred". if i check the extract checker (RSA3) i am getting the error msg "data source is not defined in the source system"
Can anybody help me on this?
one of my friend suggested that it could be the reason that some jobs are in active status that loads/updates data into base tables which the datasources refers.
Any idea on the reason and resolutions?
Greatly appreciated !Hi Vijaya,
We too got the same Error : " the datasources are not defined in the source system".
This is source system connection problem. Check whether connection between R/3 and BW is active.
This error occurs when the connection is inactive.
Also, if it is copy client, then check data exists in other client. If so delete the setup tables data in that client as well.
This will resolve your issue.
Thanks
Edited by: Allen Fyne on Aug 9, 2008 6:47 PM -
Crm- Contracts problem with profit center!
HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
Contract Scenario,
I am Creating Contract In CRM and replicating it as a contract in ECC to performe Billing(VF01) and Revenue recog(Vf44) the contract created is replicating to ECC with Internal order as a real account assignment object on the contract , when we are billing / revenue recog the dummy profit center is getting populated inthe accounting entries , the senario is explained as below
I have replicated contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real internal order(IO1),as i am using single object controlling and controlling senario at the transaction level) to all the line items ,when ever the line item is Billed(Vf01) or the Revenue recognized on the Contract(Vf44) the Accounting Entries are getting populated with Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
I there a way we change the profit center on the accounting document on billing and revenue recognition
Goods receipt:
I am Creating Contract In CRM and line item in the contract which is backlined with the princial will generate a PR in ECC with Account assignment cat "F" When ever a Po with u201CFu201D account assignment is created and GR is done on the Same , Dummy profit center is getting populated in the Accounting entries
I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to the line item
We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
I require your help very badly , Please guide me .
ThanksHi,
Did you try using substitution rules for CRm processes ?
Maybe you are looking for
-
Unable to create large image file in iphoto
I make a lot of panoramic images by stitching together overlapping images with hugin in TIFF format, then edit them in iphoto and use it to export them in jpeg format for greater versitality of use. So far I haven't had any trouble, even with large i
-
When I "print to video" FCP works well but suddenly freezes... why?¿
Hi everybody! I'm desperate right now, hope somebody could help me. I'm working on FCP 4.5 and when I'm done with my project I try to "Print to Video" and/or do it manually and all seems ok but suddenly FCP freezes (with audio still running) and I go
-
All text in PDF iphoto books displays 1 or more inches lower than it should
Hi all Im having a bit of trouble with my iPhoto books. Regardless of the theme when I turn the book into a pdf the text displays at least 1 inch lower that it should. It looks ok in iPhoto but is rendered incorrectly when saved as a pdf. Which means
-
No item category exists (Table T184L HID V )
HI ALL GETTING THIS ERROR WHEN CARRYING OUT MIGO FOR INBOUND DELIVERY. PLEASE GUIDE REGARDS REDDY
-
HT1311 Is it possible to sync two accounts on itunes?
I would like to share apps bought with my account with my wife's devices? Is this possible?