CRM EXTRACTOR 0CRM_SRV_PROCESS_I PROBLEM

Hi,
I'm using 0crm_srv_process_i datasource . While I'm trying to extracting data from CRM to BW (for some dates or some data selections) I found all data showing under one Sales Group in BW,So I checked in RSA3 in CRM than I found all data showing under one Sales Group ,so that effects problem while extraction in BW also. I checked my mappings in BW , it running fine so no problem in my BW.
Please help me to resolve this issue.
Note: My delta was running fine. Daily I'm getting correct data.
Edited by: nsrikanth1.abm on Feb 29, 2012 12:06 PM

Hi
This looks like a midlewear type of problem.
first try to process the Idoc.
IDocs stuck? Go to where it's stuck and run BD87. Find the stuck one, and "Process" it.
That'll get it through.
Alternatively, check the TRFC monitor via SM58 to see if it's stuck there and need
"Execute LUW".
If this does not help try you basis admin for more help.
Reg's
Edan

Similar Messages

CRM-BW replication problem.

Hi friends,
I have edited existing Standard CRM extractor with all requried steps in CRM Dev system
Later i have activated in RSA6 in CRM Dev system and pressed Data source Transport button and further saved in CRM Dev system.
Later in BW Dev system i have created new Infosource relevent to this extractor, but It is showing old CRM extratcor without any changes.
Please let me know how can we make all new changes replication to BW Dev system.
I have also, performed replication in BW using RSA1 and also using a programe but No use.
Is i am missing any step after RSA6 in CRM?
Plz suggest.
Thanks.

HI,
Symptom
Inconsistency in the assignment of the info-object for the Territory extraction in One order datasources
If the one order Infosources are activated then the mapping of the Datasource fields TERR_GUID and PATH_GUID are assigned to the same infoobject 0CRM_TR. Therefore, activation of the infosource causes an error.
Other terms
Sales Analytics, Service Analytics, One order data Extraction, Territory extraction
Reason and Prerequisites
PATH_GUID field of the Datasource is not marked as field hidden in BW
Solution
Please note that this correction is available from the following CRM Releases
CRM 4.0 SP08
The correction is relevant for the following datasources
0CRM_LEAD_H
0CRM_LEAD_I
0CRM_OPPT_ATTR
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_QUOTATION_I
<b>0CRM_QUOTA_ORDER_I</b>
0CRM_SALES_CONTR_I
0CRM_SALES_ORDER_I
0CRM_SRV_CONFIRM_H
0CRM_SRV_CONFIRM_I
0CRM_SRV_CONTRACT_H
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
In order to have this functionality available, please re-activate the datasource in the OLTP (CRM system) and replicate the datasource in the BW systems
The correction is the following:
The Datasource had the fields Territory Guid and Path Guid. The path guid should be marked as Field hidden in BW.
Or in other words in the datasource maintenance in the transaction BWA1, for the extract structure tab, the field PATH_GUID should have the value for Selection as 'A'.
If you still have any problems, do let me know.
regards,
ravi

CRM Extractor: Exception condition 'PROBLEM_WITH_QUERY'.

Hello all,
we have a problem when trying to execute a CRM extractor. This extractor is a copy of 0CRM_OPPT_H standard extractor. We have copied it with BWA1 transaction, add some new fields, and add two fields to the selection.
One of the fields is a date ( STATUS_SINCE ), when we execute the extractor with filter for STATUS_SINCE field empty, no problem, but if we enter a value to filter STATUS_SINCE, we get a dump.
Dump sais Exception condition 'PROBLEM_WITH_QUERY' , the information is the following:
The termination occurred in the ABAP program "CL_CRM_REPORT_ACC_OINDEX_JE
in "DOES_FIT_TO_QUERY".
The main program was "RSFHGEN2 ".
The termination occurred in line 54 of the source code of the (Include)
program "CL_CRM_REPORT_ACC_OINDEX_JEST=CM005"
of the source code of program "CL_CRM_REPORT_ACC_OINDEX_JEST=CM005" (when
calling the editor 540).
This only happens with this field, for the other field we have added to the extractor there is no problem, everything works fine.
Any help is appreciated.
Regards, Inma

Hi Inma,
Please see if OSS note 827332 (Exception-DOES_FIT_TO_QUERY in source system) helps you.

Enhance CRM extractor for BW

Hi all,
To enhance CRM extractors we enhance the BDoc and then used the BADI CRM_BWA_MFLOW or CRM_BWA_SFLOW whichever is applicable to extract the data for the enhanced fields and fill the data source.
Also we go to transaction RSA6 enhance the datasource structure.
Now my basic question is why User exists are also enhanced. The procedure is
In transaction RSA6 select the datasource structure and choose the menu "Function enhancment". This goest to CMOD transaction and there the user exit "EXIT_SAPLRSAP_001" is enhanced
Could someone explain me why some coding is done in the user exit when the data which needs to be send from the BDoc is already filled in the badi implementation. When does this user exit actually used. In what scenarios do we use this user exit along with the badi implementation.
Any idea. Thanks for the continued support and I wish "Happy new year" to all of you.
Thanks in advance
Jothi

Hi all,
To enhance CRM extractors we enhance the BDoc and then used the BADI CRM_BWA_MFLOW or CRM_BWA_SFLOW whichever is applicable to extract the data for the enhanced fields and fill the data source.
Also we go to transaction RSA6 enhance the datasource structure.
Now my basic question is why User exists are also enhanced. The procedure is
In transaction RSA6 select the datasource structure and choose the menu "Function enhancment". This goest to CMOD transaction and there the user exit "EXIT_SAPLRSAP_001" is enhanced
Could someone explain me why some coding is done in the user exit when the data which needs to be send from the BDoc is already filled in the badi implementation. When does this user exit actually used. In what scenarios do we use this user exit along with the badi implementation.
Any idea. Thanks for the continued support and I wish "Happy new year" to all of you.
Thanks in advance
Jothi

CRM Extractor Failure - DATA_LENGTH_0 CX_SY_RANGE_OUT_OF_BOUNDS

Hello Experts,
One of the CRM extractor fails during extraction with the below short dump. Every thing worked absolutely fine until now. Please advise on resolving this issue.
Short Dump Details:
Short text
Invalid partial field access: Length 0
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not caught in procedure "ZRSAX_BIW_GET_DATA_SIMPLE_2" "(FUNCTION)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is: In the executed program "SAPLZRSAX", the system attempted to access the field "TEMP_TDLINE_T" using the length 0. However, a partial field access with the length specification 0 is not allowed.
This extractor is based on RSAX_BIW_GET_DATA_SIMPLE_2 FM and worked fine without any issues previously.
Please advise.
Thanks!

Sorry, but then something has changed in the data.
Perhaps a debug of the extractor using current data will help you to find the source.
One possible reason which comes to mind is, that someone changed the Customizing in the source system and a field is no longer mandatory.
But the reason is definitly in the source system, not in BI.
Kind regards,
Jürgen

CRM Extractor change

CRM Extractor change
I need to redirect one Transaction Type into a different BW Queue.
I have the transaction type ZZ01 which is extracted by one extractor. The changes are written into the delta queue.
I need however to extract the ZZ01 with different extractor. Different queue.
The transaction type ZZ01 is a transaction category BUS2000112
I have changed the extractor in BWA1. I have added the line
ORDERADM_H PROCESS_TYPE I EQ ZZ01
Now the selection looks like this
ORDERADM_H OBJECT_TYPE I EQ BUS2000112
ORDERADM_I OBJECT_TYPE I EQ BUS2000147
ORDERADM_H PROCESS_TYPE I EQ ZZ01
But the changes have no effect. When I change the any transaction type ZZ01 it is still written into the 'old' queue.
System CRM 5.0
I did reinitialize both extractors.
Thanks for any hints
Martin

no solved

Enhancing CRM Extractors

Hello Gurus,
I have done some enhancement for 0CRM_SRV_PROCESS_I data source using user exit program by calling CRM_ORDER_READ function module.
With this we are experiencing some performance problem as CRM_ORDER_READ is bit slow.
That was my concern till today......
But today when I start debugging the DS, I came to know that standard extractor itself calls CRM_ORDER_READ FM to fill some standard fields. So, I thought of enhancing the DDS at WA by adding segments and it's fields and thought that we dont need to write code for this (I mean no user exit program, but need minimum code in MAP FM). But, even I assigned segments to fields, data is not populating. The reason I found here that these enhanced filed's are not included into standard DS's ..MAP_I function module.
Here my question is, do we have to generate any thing to include those fields into the FM? If Yes, from where? Or do we have to write user exit program to fill the fields?
Or any other ways can we solve this problem?
appreciate your help....
Thanks
RKR...

Hi RKR,
Yes if you're using the function crm_order_read, it take quite time,,, but it's very powerfull, since it will take a lot of information from there. You just use 1 function to get so many information about order.
I suggest you 2 ways :
1. Instead using that function, you can fetch the directly to the table according to your data's need. e.g. table crmd_orderadm_h, etc.
Or.
2. You make small program in BW to get data from CRM (using fm: crm_order_read), then you put the data to some table in BW.
Then, you create generic datasource whose type is <b>view -> get data from that table in BW </b> ( not a function module).
That small program can be scheduled periodically / you use process chain in order to run :
1. the small program
2. fetching those data from table using generic datasource whose type is view.
Hopefully it can helps you a lot ...
Best regards,
Niel.
(Many thanks for any points you choose to assign).

Attribute Set in standar CRM extractor

Hello all,
I have to get reporting about Marketing attributes in CRM. I´m using business content extractors for this information:
0CRM_MKTATTR_ATTR
0CRM_MKTATTR_TEXT
0CRM_MKTMETA_ATTR (metadata)
0CRM_MKTMETA_TEXT (metadata)
But the standard doesn´t retrieve attribute set field.
Did anybody enhance this standard to retrieve this field? If so, could you give me some ideas about how to do it?
Thanks,
Carmen

Hi Carmen,
Can you please elaborate the problem a bit more. I cant see this attribute set field anywhere in the standards.
regards,
Parth.

CRM Extractor issue 0CRM_SRV_IBASE_ATTR

Hello,
This is a production issue.
CRM system has the installed bases created and extracted to BW and reporting is fine.
When there is a change to these installed bases such as
* serial number is changed AND/OR
* material number is changed
the delta still brings in the complete hierarchy 'After Image' only.
Meaning old material number and old serial number still remains in the BW cube and hence reporting is faulty.
Example.
In Ibase 30, Material 500085 with Qty 1, is overwritten/changed in CRM as Material 600088. (This is seen in Activity log in CRM correctly).
The extractor sends whole Ibase content as one row for Component header and one row for Material 600088 details(as seen in PSA).
However material 500085 row is still valid in BW as the validto is 12/31/9999.
So BW reports qty as 2 instead of 1.
I see the extractor delta process is AIM.
So this should have been an ongoing issue. However user complained only now.
How to solve this problem. Since this is a generic extractor others would also face this situation i would think.
Please advise.
Thanks

Hi Meenakshi,
As i understand you had two issues 1. with the new material 2.with qty.I hope the modified record is not coming to DSO.Some part of the code in the start routine is blocking the record.Please analyze the code in start routine.And check the change log table for this record for any clue how it is not being overwritten.
Regards,
Rambabu

CRM Extractors for Product & Customer

Hi Experts,
Iam new to CRM, can any one provide me the extractors for Product and Customer. Here we are trying to extract Product and Customer data from CRM source to BW/BI target, so if i know the extractors for the above it will be really helpful. Also if there is any step by step guide for the same it would be a great help.
Thanks in advance
Shiv

Hi all, this may be too late based on the posted dates, but this is a current issue for me that I have found solution for now and I will post up anyways same thing. There is very little documentation so hopefully this is helpful for whoever else has unique requirements to use this delivered functionality.
Finally I am able to find a solution to this problem and now my system is tracking all status changes and providing me detail conveniantely on duration and time between status changes.
There are some table entries that need to be created plus a couple notes that will help. This applies to people who are not getting any data whatsoever in their CRMD_TSS_DTRACK table or 0CRM_TSS_DTRACK extractor.
Goto transaction --> SMW3FDCUST and make the following entries:
BDoc Type BUS_TRANS_MSG
Context mBDoc Notification (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
and
BDoc Type BUS_TRANS_MSG
Context mBDoc Notification Multiple (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
and
BDoc Type BUS_TRANS_MSG
Context mBDoc Initial Load (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
To also ensure your statuses are being captured after all your configurations have been made, be sure that for these 2 key notes you have the approriate corrections existing in your system:
1024652 - This ensures your custom statuses groups are captured in table and extractor (once you have enhanced it of course)
1239530 - Ensures that all status changes are captured according to your configurations
Thanks.

Several clients in CRM PCUI. Problems reusing the same iView for ValueHelp

Hi, all:
We are implementing a new scenario with PCUI (based on Case Management) and using the client number 400.
The problem is that this is the second scenario because there is an already customized scenario using client 200 of the CRM server and the same EP.
These are the symptoms:
a) Launching the application from the SAP_GUI (like a CRM BSP Application) the main screen and the value helps (pop-up windows) are working correctly.
b) Launching the application from a newly create BSP iView, the main screen appears correctly; but the pop-up windows are not working. These are the issues i have seen:
1.- The system object with the system alias SAP_CRM points to client 200.
2.- The iView that is called when the value help is clicked has the value SAP_CRM as the system alias. And it is accessing client 200 even thought the URL parameter sap-client=400 is passed to it.
I tried a workaround copying standard iView located in:
pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.core.defaultservices/com.sap.pct.crm.core.valuehelp
to another location in Portal Content and changing the parameter system alias to SAP_CRM_400 (which is a correct system object pointing to client 400). But i don't know how to configure the search to use this iview instead of the standard one.
Can anyone help me with this workaround or with other solution to this problem?
Thank you,
Fran
Edited by: Francisco Javier Rodríguez Nieto on Apr 15, 2009 9:13 AM

Saurabh,
If you have added your field through the EEW you can follow my weblog to add them to the PC-UI application: https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/2040. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] If you are missing something and/or something is unclear let me know and I will update this BLOG and help you solve your issue. Tiest.

Consumer Contact's Web Service CRM On Demand: Problem to do an operation!

Hi,
I'm trying to consume a Web service offered by CRM On Demand, namely it is the Contact object.
The steps I followed were:
1) Download the file .wsdl associated with contact from CRM On Demand
2) Generate Proxy web service from JDeveloper 10g (version: 10.1.3)
3) Configure the client to consume the resource and to do, for example, the contact’s insertion.
I can make a login and a logout on the Web Service correctly, but when I try to do an insertion I can’t do it.
The log generated by JDeveloper when running the client is as follows:
WARNING: Unable to connect to URL: https://secure-ausomxgfa.crmondemand.com/Services/Integration due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: www-proxy.au.oracle.com
error: java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: www-proxy.au.oracle.com
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: www-proxy.au.oracle.com
at crmondemand.runtime.Contact_Stub.contactInsert(Contact_Stub.java:283)
at crmondemand.ContactClient.contactInsert(ContactClient.java:96)
at crmondemand.ContactClient.main(ContactClient.java:71)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: www-proxy.au.oracle.com
at oracle.j2ee.ws.common.util.exception.JAXRPCExceptionBase.<init>(JAXRPCExceptionBase.java:93)
at oracle.j2ee.ws.common.util.exception.JAXRPCExceptionBase.<init>(JAXRPCExceptionBase.java:89)
at oracle.j2ee.ws.client.ClientTransportException.<init>(ClientTransportException.java:33)
at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:144)
at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:121)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:169)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:111)
at crmondemand.runtime.Contact_Stub.contactInsert(Contact_Stub.java:265)
... 2 more
The HTTP Proxy Server settings (Tools-> Preferences-> Web Browser and Proxy) in JDevloper is:
- Host name: www-proxy.au.oracle.com
- Port: 80
- Exceptions: xpvmware | *. oracle.com | *. peoplesoft.com | *. jdedwards.com | *. mlab.jdedwards.com | *. oracle.com | *. peoplesoft.com | *. jdedwards.com | * . mlab.jdedwards.com
- No authentication.
I'm not sure if it's a problem with HTTP proxy server settings or URL/ENDPOINT problem, because maybe I am trying to access an incorrect URL.
If I try to access from the browser to this URL I can't access the wsdl, so I do not know if this address is correct, but is specified in the file. Wsdl:
<soap:address location="https://secure-ausomxgfa.crmondemand.com/Services/Integration" />
For this reason, I supposed that it is correct...
I have tried to access via URL with the follows:
- https://secure-ausomxgfa.crmondemand.com/Services/Integration
- https://secure-ausomxgfa.crmondemand.com/Services/Integration/Contact
- https://secure-ausomxgfa.crmondemand.com/Services/Integration/Contact?wsdl
In all I have the next response from the Internet browser:
<?xml version="1.0" encoding="UTF-8" ?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>Client</faultstring>
<detail>
<ErrorCode>SBL-ODU-01001</ErrorCode>
<ErrorMessage>An invalid command was specified: doGet with no data</ErrorMessage>
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
Since the client generated, I have tried with the follows:
1) System.setProperty("javax.xml.ws.BindingProvider.ENDPOINT_ADDRESS_PROPERTY", endpoint);
2) myPort.setEndpoint(endpoint);
where endpoint = "https://secure-ausomxdsa.crmondemand.com/Services/Integration" + ";jsessionid=" + idSesion;
or "https://secure-ausomxdsa.crmondemand.com/Services/Integration" (with both options I can do the operation...)
and idSesion = logon("https://secure-ausomxdsa.crmondemand.com/Services/Integration",USERNAME,PASSWORD);
Do you know what is the correct URL (endpoint)?
Is that a correct HTTP proxy server configuration to invoke a Web service CRM On Demand? But so, what is the correct setting? And if it is a good configuration, what am I doing wrong?
The source code from my client is:
String idSesionFull=null, idSesion=null, endpoint=null;
try {
crmod.DefaultClient myPort = new crmod.DefaultClient();
System.out.println("Invoking: " + myPort.getEndpoint());
ListOfContact list = new ListOfContact();
ListOfContact outlist = new ListOfContact();
Contact[] contacts=new Contact[2];
Contact contact=new Contact();
//ContactWS_ContactInsert_Input in=new ContactWS_ContactInsert_Input();
//ContactWS_ContactInsert_Output out=new ContactWS_ContactInsert_Output();
// Login WS (HTTPS)
//URL = "https://secure-ausomxdsa.crmondemand.com/Services/Integration"
idSesionFull=conexionWS_CRM.logon(URL,USERNAME,PASSWORD);
idSesion = conexionWS_CRM.getSessionId(idSesionFull);
//Another option I have tested: endpoint = "https://secure-ausomxdsa.crmondemand.com/Services/Integration" + ";jsessionid=" + idSesion;
endpoint = "https://secure-ausomxdsa.crmondemand.com/Services/Integration";
myPort.setUsername(USERNAME);
myPort.setPassword(PASSWORD);
myPort.setEndpoint(endpoint);
System.setProperty("javax.xml.rpc.service.endpoint.address", endpoint);
System.setProperty("javax.xml.rpc.security.auth.username", USER);
System.setProperty("javax.xml.rpc.security.auth.password", PASSWORD);
System.setProperty("javax.xml.ws.BindingProvider.ENDPOINT_ADDRESS_PROPERTY", endpoint);
// Add contacts
for (int i = 0; i < contacts.length; i++) {
contact.setContactId("WSCRM"+i);
contact.setContactFirstName("JDeveloper"+i);
contact.setContactLastName("prove"+i);
contact.setCellularPhone("77777777"+i);
contact.setExternalSystemId("1234"+i);
contacts=contact;
list.setContact(contacts);
//in.setListOfContact(list);
//in.setEcho("OFF");
outlist=myPort.contactInsert(list,"OFF"); //<--- Is it correct????
Contact[] results = new Contact[2];
Contact result = new Contact();
for (int i = 0; i < contacts.length; i++) {
results=outlist.getContact();
System.out.println("ID:"+results[i].getContactId()+" Name:"+results[i].getContactFirstName());
// Logout WS (HTTPS)
logoff(URL, idSesion);
} catch (Exception ex) {
System.out.println("error: "+ex);
ex.printStackTrace();
logoff(URL, idSesion);
Any idea to solve this problem?
Thank you very much in advance for any help.
Edited by: user12158402 on 03-nov-2009 12:39
Edited by: user12158402 on 03-nov-2009 12:45
Edited by: user12158402 on 03-nov-2009 12:47

Hi Royston,
thank you for your help, but unfortunately I have the same error message.
Here is the XML I use, I added the authentication that you provided me.
<?xml version="1.0" encoding="utf-8"?>
<soapenv:Header>
     <wsse:Security>
          <wsse:UsernameToken>
               <wsse:Username>EUROMASTERFR/AELMASKOUNE</wsse:Username>
               <wsse:Password>aqwAZE19</wsse:Password>
          </wsse:UsernameToken>
     </wsse:Security>
</soapenv:Header>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:crmondemand/ws/account/10/2004" xmlns:xsdLocal1="urn:/crmondemand/xml/account">
<soap:Body>
<tns:AccountWS_AccountQueryPage_Input>
<tns:PageSize>10</tns:PageSize>
<xsdLocal1:ListOfAccount>
<xsdLocal1:Account>
<xsdLocal1:CurrencyCode/>
<xsdLocal1:AccountName>IBM</xsdLocal1:AccountName>
</xsdLocal1:Account>
</xsdLocal1:ListOfAccount>
<tns:StartRowNum>0</tns:StartRowNum>
</tns:AccountWS_AccountQueryPage_Input>
</soap:Body>
</soap:Envelope>
but for (xmlns: WSSE = "http://schemas.xmlsoap.org/ws/2002/xx/secext" do not forget to enclose the tag with a '>') I do not know to include it.
Best Regards.
Anas

CRM Extractor for service management - date type

Hi,
I want to extract data for the service management from crm system. I find the data with crm_order_read in the table et_appointment. I need the field appt_type with the time stamps.
Is there a business content extractor available? I can not find one for this issue.
In which table is the data from et_appointment really stored?
Thanks in advance.
Best regards
Nils

Hi Sunita,
I think you wanted to calculate the time duration of the service requests. you can refer to tables
CRMD_ORDERADM_H,
CRMD_SRVPLAN_I (Service Plan Item - Service Cycle Interval).
Or you can refer to FM CRM_ORDER_READ and export parameter ET_APPOINTMENT.
Regards,
Karthik.

CRM WebUI Caching problem

hi all,
We are creating/Updating CRM products as a background job. When we update the products, we dont see the changes immediately in the WebUI. These changes are immediately visible in SAPGUI.
If we close and open the browser we will be able to see the changes we have made from background.
Is it a caching issue? How to resolve this problem?
Please help.
Raghav

Hi Raghav,
Thanks for the details!
I think the issue is because the page is not refreshed hence fresh data transfer does not happen with the backend. So the new results are not included in the search result. Check if you can manually refresh the search result to every time make a backend call and get the results.
You can also opt for refreshing of the page as well.
Hope this helps!
Regards,
Saumya

CRM and LAE problem

Dear all,
I hope someone knows the solution of my problem.
We are implementing a Leasing solution. It includes CRM, R/3. Normally if a Leasing contract is created in CRM, it will transferred to R/3 automaticllay and prpcessed by LAE (Leasing Accounting Engine) automatically.
but now we face the following problem. When we create a leasing contract in CRM, it is transferred to R/3 automatically. (we can find it in LAE_CRM_HEADER, LAE_CRM_ITEMS table). But the contract is not processed by LAE automatically. We have used transaction FILATEST, we can process the contract. But if we go back to CRM and want to do some change process, a error occurs that the contract is still processing by LAE.
Is there some LAE expert who can tell me where may the error?
Thanks and regards
Tao

Hi,
thanks for your response. But the problem of us is even the status of the contract is 9, in CRM, we can not process it. We get always the eorror that the contract is processing by LAE. Do you know where CRM check the status?
regards
Tao

CRM EXTRACTOR 0CRM_SRV_PROCESS_I PROBLEM

Similar Messages

Maybe you are looking for