CRM_IC default.htm gives error when executed from SE80

Hi Everyone,
When I execute CRM_IC BSP application from SE80, "default.htm" (SAP CRM), then it gives me the HTTP 500 - Internal server error. On that page only when i click the hyperlink "Open the mycompanydomainname.com:8000 home page" It says the error is " BSP Exception: the BSP URL / Does Not Contain Any Namespace Entries."
I feel this error should not come at the first place. I have executed this same BSP earlier on diff CRM systems and it works fine. infact you can use much of the functionality of IC webclient without actually using portal. Is there anything i need to maintain? I tried debugging it. Few things which are observed are as follows:
1) there is no entry in the table TCPDB
2) As soon as i execute the default.htm it should prompt me to login, but it does not, and the error is for namespace hence does it mean that it is not able to find any name value pair like , userid?
Regards,
Dipender Singh
SAP CRM/IPC/Netweaver Consultant

Hello Dipender,
I think you should post this Question in the <a href="https://forums.sdn.sap.com/forum.jspa?forumID=126&start=0">Customer Relationship Management (CRM)</a> Forum.
Regards
Gregor

Similar Messages

Epson Artisan 810 gives error when prints from 10.6.2

I know that Epson update 2.2 was released for 10.6.1. But it doesn't seem to help when printing from any application with 10.6.2. Should I downgrade back to 10.6.1? I have an Artisan 810 that won't print from 10.6.1 on a MacBook Pro that came out in September of 2009. It will print a sample page from the utility, and run the print head cleaning utilities, but won't print a document. It makes some indication that it can't deal with a postscript file in the error in the print queue the moment I send a print job from Neo Office or Safari. I'm connected via USB. Eventually I'd like to figure out how to add it to my Time Capsule's 802.11n network if possible. But first let's get it working under USB.

I just went through this and seriously considered publishing the directions so I reckon this is my chance.
When all was said and done, I only used the Epson utility to remove all of the installed Epson software, did not use any drivers as provided by them, including the already installed Photo R280 drivers for my other printer, and started over.
Once done, I used the OSX Print & Fax System Preference to install the 810 as a new printer and let Software Update do its thing. It seems to load and install everything needed to make the thing work. Most of the Epson stuff seems useless and I find that the OSX Image Capture utility does a great job of running the scanner part.
The most important thing I learned is that the directions and utilities as provided by Epson are not very helpful. The network setup utility they provide doesn't work at all on a Mac and looks exactly like the Windows XP version. I got very frustrated and simply accessed the menus myself on the 810's control panel and joined it with the wireless network manually. It was way easier and less frustrating then trying to get the Epson junkware working.
As an aside, there are a kajillion little plastic thingies that can break and cause problems in this thing. Make sure to register it and get the free extended warranty
Other than the installation pains this has turned out to be a pretty incredible little device. I already have a great scanner and an adequate photo printer, but I needed a fax modem, and for about the same price as the modem I ended up with a lot of other functionality as well.
You can always page me in the lounge if you need any further input.
-DP

IMovie gives error when importing from Movies folder.

When I try to import either.avi or.mov from the Movies folder on my MacBook (the Movies folder has not changed location- it's on the Macintosh HD) iMovie '11 tells me one of two things:
"+*Copy Failed*+
/Users/admin/Movies/filename.mov
+(Insufficient access privileges for operation)+"
or
"+*Copy Failed*+
/Users/admin/Movies/filename.mov
+(File not found)+"
Is this a glitch? What can I do or what am I doing wrong?
Message was edited by: ipodfreak110

Are you saving the events to your internal hard drive or an external via USB as you capture? Reason I ask is I had this problem when capturing directly to my external USB drive I use to store my camcorder footage on. When I switched to saving to my internal it solved the problem. What I now do is save it to my internal (1 tape at a time) and then close iMovie '08 and then copy the event to the iMovie Events folder on my external hard drive. I then delete it on my internal. Open up iMovie and voila, its there and works.

Error when executing interface which load data from csv file which has 320

Hi,
Can some one provide a resolution for below error:
I have created an interface which load data from csv file which has 320 columns, to a Synonym which has 320 columns in it
using LKM File to SQL, IKM Sql Control Append.
I am getting below error when executing the interface :
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: Error during task interpretation. Task: 6 java.lang.Exception: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location> BSF info: Create external table at line: 0 column: columnNo
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Caused by: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location>
BSF info: Create external table at line: 0 column: columnNo
     at bsh.util.BeanShellBSFEngine.eval(Unknown Source)
     at bsh.util.BeanShellBSFEngine.exec(Unknown Source)
     at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:471)
     ... 11 more
Text: The application script threw an exception: java.lang.StringIndexOutOfBoundsException: String index out of range: 2 BSF info: Create external table at line: 0 column: columnNo
out.print("createTblCmd = r\"\"\"\ncreate table ") ;
out.print(odiRef.getTable("L", "COLL_NAME", "W")) ;
out.print("<?=(extTabColFormat.getUseView())?\"_ET\":\"\"?>\n(\n\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
          "<?=extTabColFormat.getExtTabDataType(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022[DEST_WRI_DT]\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
     , ",\\n\\t", "","")) ;
out.print("\n)\nORGANIZATION EXTERNAL\n(\n\tTYPE ORACLE_LOADER\n\tDEFAULT DIRECTORY dat_dir\n\tACCESS PARAMETERS\n\t(\n\t\tRECORDS DELIMITED BY 0x'") ;
out.print(odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")) ;
out.print("'\n\t\t") ;
out.print(odiRef.getUserExit("EXT_CHARACTERSET")) ;
out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_STRING_SIZE")) ;
out.print("\n\t\tBADFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.bad'\n\t\tLOGFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.log'\n\t\tDISCARDFILE\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.dsc'\n\t\tSKIP \t\t") ;
out.print(odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")) ;
out.print("\n") ;
if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {out.print("\n\t\tFIELDS\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\tPOSITION([FILE_POS]:[FILE_END_POS])\\t"+
                    "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
                    , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
} else {out.print("\n\t\tFIELDS TERMINATED BY x'") ;
out.print(odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")) ;
out.print("'\n\t\t") ;
if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){out.print("\n\t\t") ;
} else {out.print("OPTIONALLY ENCLOSED BY '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)) ;
out.print("' AND '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)) ;
out.print("' ") ;
}out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
                    "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
                    , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
}out.print("\tLOCATION (") ;
out.print(odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")) ;
out.print(")\n)\n") ;
out.print(odiRef.getUserExit("EXT_PARALLEL")) ;
out.print("\nREJECT LIMIT ") ;
out.print(odiRef.getUserExit("EXT_REJECT_LIMIT")) ;
out.print("\n\"\"\"\n \n# Create the statement\nmyStmt = myCon.createStatement()\n \n# Execute the trigger creation\nmyStmt.execute(createTblCmd)\n \nmyStmt.close()\nmyStmt = None\n \n# Commit, just in case\nmyCon.commit()") ;
****** ORIGINAL TEXT ******
createTblCmd = r"""
create table <%=odiRef.getTable("L", "COLL_NAME", "W")%><?=(extTabColFormat.getUseView())?"_ET":""?>
     <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
          "<?=extTabColFormat.getExtTabDataType(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022[DEST_WRI_DT]\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
     , ",\n\t", "","")%>
ORGANIZATION EXTERNAL
     TYPE ORACLE_LOADER
     DEFAULT DIRECTORY dat_dir
     ACCESS PARAMETERS
          RECORDS DELIMITED BY 0x'<%=odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")%>'
          <%=odiRef.getUserExit("EXT_CHARACTERSET")%>
          <%=odiRef.getUserExit("EXT_STRING_SIZE")%>
          BADFILE          '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.bad'
          LOGFILE          '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.log'
          DISCARDFILE     '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.dsc'
          SKIP           <%=odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")%>
<% if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {%>
          FIELDS
          <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
               <%=odiRef.getColList("", "[CX_COL_NAME]\tPOSITION([FILE_POS]:[FILE_END_POS])\t"+
                    "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
                    , ",\n\t\t\t", "","")%>
<%} else {%>
          FIELDS TERMINATED BY x'<%=odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")%>'
          <% if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){%>
          <%} else {%>OPTIONALLY ENCLOSED BY '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)%>' AND '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)%>' <%}%>
          <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
               <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
                    "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
                    , ",\n\t\t\t", "","")%>
<%}%>     LOCATION (<%=odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")%>)
<%=odiRef.getUserExit("EXT_PARALLEL")%>
REJECT LIMIT <%=odiRef.getUserExit("EXT_REJECT_LIMIT")%>
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit().
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:738)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

The issue is encountered because the text delimiter used in the source file did not consist of a pair of delimiters.
Please see support Note [ID 1469977.1] for details.

Lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite

lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite
it also says it will attempt to to fix the next time it opens it doesn't do anything

Check this thread. Your Previews Cache files are corrupted.
Re: preview cache?

Error when executing job from BW

Hi,
We have created a job that transfers a set of data to BW PSA.
When executing from data services designer or from the management console the job works fine.
When executing the job from BW administration workbench, the job is executed and does not report failures (we can consult the log in the management console).
But nothing arrives in the PSA, and on the workbench we get the following errors:
Error in a data conversion in record
data record 1 of the fragmented entry is too long.
Error in a data conversion in record
Please advice what to check next.
Best regards
Thomas

Hi,
Thank you for your help.
I tried changing the BW datastore to UTF-8 but am still not able to load these data when it is trigged from BW.
After changing the datastore to UTF-8 I get some additional information in the log but no errors
Additional information in the log:
The specified locale and datastore codepage
Br
Søren Ejlersen

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

Error when executing external workflow process

OWB 9.2 with server on Windows NT.
I can successfully execute a mapping workflow process from the deployment manager, but I get an error when executing a simple external process:
command: move
parameters: ?c:\\data\\owbtest\\src.txt?c:\\data\\owbtest\\trg.txt
Resulting output:
Create Process: move c:\data\owbtest\src.txt c:\data\owbtest\trg.txt error=2
File c:\data\owbtest\src.txt exists.
My questions:
1. What am I doing wrong?
2. What does error=2 mean? Is this a Windows error?
3. Do I have to configure some location for the process? What does 'use default location' mean for the configuration property Working Location? Is a host-logon performed before the host-command is executed?
4. Is there logging available for an external process? In the workflow tables or views?
5. I can't find much documentation for these questions. Is there more documentation than the OWB user guide and the OWF guide?
Jaap.

It seems that commands that are not an executable in some directory, but are part of the Windows kernel (like 'move'), need to be started as a parameter of the cmd command. I did this and now it works fine.

Shell Script gives error when run through cron job.

Hi,
The following shell script runs without any problem when executed manulally.
USED=$(df -h /arch | tail -1 | awk '{print $5}' | cut -d '%' -f 1)
if [ ${USED} -gt 90 ]
then
find /arch/AUBUAT/ -type f -mtime +0 | xargs rm
find /arch/AUBMIG/ -type f -mtime +0 | xargs rm
fi
But the same gives below error when called from a cron job:
/backup/arch_test.sh: syntax error at line 1: `USED=$' unexpected
We are running following version:
bash-3.00$ uname -a
SunOS uaeaubdbdr01.aub.af 5.10 Generic_141444-09 sun4u sparc SUNW,SPARC-Enterprise
Kindly assist.
Thanks
Edited by: user13362786 on Apr 20, 2011 4:36 AM

Hi,
When I used #!/usr/bin/sh now even the manul execution of the script fails with the same err:
bash-3.00$ ./arch_test.sh
./arch_test.sh: syntax error at line 2: `USED=$' unexpected
And when I used #!/usr/bin/ksh the manual execution runs fine but again when the script is run from cronjob it now give dirrect err:
/backup/arch_test.sh[2]: df: not found
/backup/arch_test.sh[2]: tail: not found
/backup/arch_test.sh[2]: cut: not found
/backup/arch_test.sh[2]: awk: not found
/backup/arch_test.sh[3]: test: argument expected

Lightroom encountered and error when reading from it preview cache and needs to quit

A power outage caused my Lightroom 5.2 to shut down without closing. When I powered back up and opened lightroom it gives me an error "Lightroom encountered and error when reading from it preview cache and needs to quit" and then it says it will try to fix it the next time it opens. I have opened it 20 times and it is not fixing it. I removed the program completely and upgraded to 5.5 AND it is still giving me the same error. Is my catalog corrupt or something? I had it set to automatically load the most currently used catalog, so it is not allowing me to open or start a new catalog either. HELP!!!

Search the forum, this has been answered many times.

LR encountered an error when reading from its preview cache and needs to quit.

I have the 30 day trial version of Lightroom. I was able to use it for one week, but the past 1.5-2 weeks, it has been locked up and giving this error message. How do I resolve the problem? And how do I reset the 30 day free trial? I would like to have time using the product, before deciding on the annual contract.
"LR encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
Thank you.

Delete the preview cache from the Lightroom folder in your Pictures folder if you used the default placement. It has the extension .lrdata.
You cannot reset the trial period.

LRCC Error: Lightroom encountered an error when reading from its preview cache and needs to quit.

I just upgraded from LR 5.7.1 to LRCC a couple of days ago. After working with a collection of images in Lightroom CC, this message popped up: "Lightroom encountered an error when reading from its preview cache and needs to quit." What do I need to do to remedy this? Thanks!

Quit Lightroom
Then trash the preview cache. It’s in the main catalog folder.
Delete the folder with the ending Previews.lrdata
The default location for the Lightroom folder is normally Pictures/My Pictures if you did a standard installation.
Re-launch Lightroom after deleting the Previews folder.
N.B. do not touch files ending .lrcat

Error message on start up "Lightroom encountered an error when reading from its preview cache and needs to quit"

Error message on start up "Lightroom encountered an error when reading from its preview cache and needs to quit" I uninstalled and downloaded it again and still get the same error. At this rate I won't have any chance to use the 30 day trial period as it simply isn't working. I have see suggestions elsewhere to delete a particular file, but I don't have it. Any ideas?

You need to trash the preview cache. It’s in the main catalog folder.
Delete the folder with the ending Previews.lrdata
The default location for the Lightroom folder is normally Pictures/My Pictures if you did a standard installation.
N.B. do not touch files ending .lrcat

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

CRM_IC default.htm gives error when executed from SE80

Similar Messages

Maybe you are looking for