Crm_ic showing Loading status..........

hai all,
          I am trying to access the following url....
http://FQDN:8004/sap/bc/bsp/sap/crm_ic/default.htm?sap-client=370&sap-
sessioncmd=open
Its showing the "Loading" status.....in the internet browser,,,,,,,,,,,,,,,,,
I activated all the services in sicf.Please let me know,if i need to do anything.....
Thanks and Regards,
Venkat.

Hi Venkat,
All i can think of .
1. ENDLESS LOOP.
2. BREAKP_POINTS may be set somewhere.
3. If buffered Frames are used, browser might not be supporting frames. (which might not be the case as you said you are using IE).
Checl st22 if there is shortdump ((which might not be the case as well).
Cheers
Amandeep

Similar Messages

  • Oracle SSO not showing up status after rebooting the 10gapplication server

    Hi all,
    I installed 10g R2 10.1.2.0.2 application server RHEL AS 4.0 2.6.9-11 kernel.
    After the successful installation IM and MR and MT (BI). All the components in the MT and infrastructure was showing up status. After rebooting the machine i executed the following commands
    For Infrastructure
    1.     To make the metadata repository up and running
    Log in as an oracle user
    #cd /home/oraASInfra/bin
    #export ORACLE_HOME=/home/oraASInfra
    #export ORACLE_SID=mamcinfr
    #./lsnrctl start
    #./sqlplus
    Enter userame: sys as sysdba
    Sql>startup
    Sql>Exit
    2.     To start the other components of the infrastructure
    Log in as an oracle user
    #cd /home/oraASInfra/opmn/bin
    #./opmnctl startall
    3.     To start the iasconsole
    #cd /home/oraASInfra/bin
    #./emctl start iasconsole
    For Middle tier
    1.     To start the middle tier components
    Log in as an oracle user
    #cd /home/oraASmt/opmn/bin
    #./opmnctl startall
    2.     To start the iasconsole
    #./emctl start iasconsole
    In the MT all the components is showing up status
    In the Infrastructure except oracle sso OID , HTTP server and OC4J security is showing up status.
    There is no any port conflicts between the infrastructure and MT.
    Is there any post installation tasks has to be done after the installation?
    please help me to sort out the issue.
    thanks,
    C Saju

    1. After RapidWiz with 11.5.10.2 CDs, do we need to
    do any post installation step to make the browser
    load Oracle Forms. Do we need to create our own
    certificate using envshell.cmd and then adjkey. And,
    apply that to Jinitiator using adjbuild.sh and
    regenerate JAR files using ADADMIN Jar ( I am so far
    assuming that these steps are not necessary after for
    rapidwiz install of 11.5.10.2 )Your assumption is right. You do not have to do anything
    2. Do I need to apply the Oracle App 11i 11.5.10.2
    Maintenance Pack after installing using RapidWiz from
    the main set of CDs labeled as 11.5.10.2No
    3. Should I try by installing manually latest
    Jinitiator 1.3.1.21 or 1.3.1.25You do not have to upgrade your jinitiator version unless you want to go with the latest one.
    Since (adsign.txt, appltop.cer, and identitydb.obj) do not exist in your system, you just need to initialize the java certificate as follows:
    adjkey -initialize
    This will create the following files:
    - adsign.txt directory $APPL_TOP/admin
    - appltop.cer direcotry $APPL_TOP/admin
    - identitydb.obj directory $HOME of the user that launch adjkey
    Metalink note: 365735.1 should be helpful.
    Good luck

  • ABAP Program Name CHanging the PSA Load status

    Hi,
    Our Scenario is Non-SAP -> PI -> BI.
    Every Day PI reads the file from source and it will directly upload to PSA in BI.But in PSA the status will show as yellow only it is not turning to green.But I am able to see the data in PSA but status is yellow.
    When we activate the Data source manually the load status is turning to green.
    I heared there is an ABAP Program to change the status.If anybody knows pl provide me the details.
    Regards
    Ram.

    Hi Ramakanth,
    Yes, that right. I have mistaken here because our pos dispatcher pumps data source every 15 mins thats why its in yellow status. I am sorry about that.
    Usually there are some reasons why the PSA in yellow.
    1. If the data is being loaded from PSA to data target, it will be in yellow
    2. If the data is loaded into PSA then it will be in yellow
    3. If we make any changes in the PSA for example deleting few records in psa and then added and transferred records doenst match then it will be yellow. In this case we have to manually change the status.
    In your case I am not sure y its not getting into green once is done. We never had any issue. Pos dispatcher runs and uploads the data into PSA and then we upload into targets.
    Thanks
    Srikanth

  • Jsp shows wrong status in the browser

    Hi,
              I am facing a problem in JSP. I am working on Weblogic 5.1 JSP's. The problem I am facing is that even after loading the whole jsp in the browser, the status bar on the browser still indicates that it is lookgin for something, It is not showing DONE status. User's of this page r getting misguided.
              please help me
              ram
              

    Can you provide more information? Are you using the latest Service Pack? Do
              you use a proxy in front of WebLogic?
              Please be more detailed.
              Regards,
              Eric
              Which version of WebLogic?
              "Ram Perumalla" <[email protected]> wrote in message
              news:3bb87530$[email protected]..
              > Hi,
              > I am facing a problem in JSP. I am working on Weblogic 5.1 JSP's. The
              problem I am facing is that even after loading the whole jsp in the browser,
              the status bar on the browser still indicates that it is lookgin for
              something, It is not showing DONE status. User's of this page r getting
              misguided.
              >
              > please help me
              > ram
              

  • Where is the refresh button and where is the bar at the bottom of the page that gives the loading status of the page? Why did you mess with something that was perfectly fine??

    I updated to firefox 4 and it's not as good as the former version. There is no refresh button, and I use that a lot. There is no loading status bar at the bottom of the page and I liked the tabs BELOW the page address.
    Why do you keep changing things, just for the H**L of it...

    In Firefox 4 by default the Stop, Go and Reload (Refresh) buttons are combined and attached to the right hand edge of the location bar.
    When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
    If you want separate buttons, right-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar
    For details about what happened to the status bar see https://support.mozilla.com/kb/what-happened-status-bar

  • Show Loading icon during long PPR request?

    Hi,
    I have a 11g taskflow that loads a bpel tasklist which can take some time to load when the user has a lot of tasks. The pagefragment shows the tasks based on a view object. The view object is filled by calling the bpel api over soap which can take some time (did not get the rmi client to work with weblogic). When the view object is filled the UI shows the fetching data text but during loading the view object the UI stays on the calling page and to the user it looks like the application is not doing anything when he clicked the show tasklist page menu item while in fact the page is still loading. Is there a way to show a status/loading icon/component when PPR is loading the pagefragment that contains the task list? The fact that loading takes some time is not an issue but now the user has now idea if there is actually happening something. Showing the loading icon that is rendered at application startup during waiting would be great .....
    Kind Regards,
    Andre

    Hi,
    try af:progressIndicator
    " The progressIndicator component can be used to give users an indication that there is a back end task in progress. A ProgressIndicator's state is tracked by the org.apache.myfaces.trinidad.model.BoundedRangeModel attached to this component through its 'value' attribute. The BoundedRangeModel provides a 'value' and a 'maximum' to the component. If either the 'value' or the 'maximum are negative numbers, the progressIndicator is in an indeterminate state and shows up as a spinner animation. If the 'value' is not negative (and the 'maximum' is negative), the progressIndicator is in a finished indeterminate state and shows up as a stopped spinner. When the 'value' and 'maximum' are non-negative values, the component switches to a determinate mode and renders a progress bar indicating percentage of task completion ('value' / 'maximum'). Each of these various states will show a hover description for that state Once the task is complete, if an 'action' has been assigned to the progressIndicator, then an ActionEvent is triggered.
    The progressIndicator component can be used with a poll component from the page as a partial trigger, in order that it be updated at regular intervals in PPR mode as determined by the pollInterval from the poll component. "
    <af:progressIndicator id="progId" value="#{boundedRangeModel}" />
    value: The data model being used by this progress component. The model should be of type org.apache.myfaces.trinidad.model.BoundedRangeModel.
    Frank

  • Essbase Java Apis- Checking the Load status of Cube

    Hi all,I am using Essbase 7.1 Java Apis.I want to check the Load status of the Cube.I have used the following Api.Cube.getCubeLoadStatus() However there is problem with this Api.If the Cube is not loaded then when I use this Api for the first time, it shows the status as "Not Loaded".However subsequent calls to the same Api shows that the same Cube is "Loaded".Clearly use of this Api results in loading of a Cube which was initilally unloaded.(I belive, in Administrative console right click on Cube -> Stop results in unloading of the Cube)Please answer my following questions :1) Which Api should I use to check the Cube's load status without affecting its current load state.2)I tried using Cube.isActive() Api.However this Api throws an exception for all states of the Cube.3)What is the diffence between a "Loaded" Cube and an "Active" CubeThanks

    1) Which Api should I use to check the Cube's load status without affecting its current load state. <<I don't know the answer to this one.. It seems to me that it may be a bug. You should report this one to Hyperion Tech Support.>>2)I tried using Cube.isActive() Api.However this Api throws an exception for all states of the Cube. <<I haven't tried this one either..>>3)What is the diffence between a "Loaded" Cube and an "Active" Cube <<Finally one I think I can answer.. A loaded cube means, I believe, that the cube has been loaded by the server and is immediately available. An 'active' cube, on the other hand, is the terminology used to specify that a specific connection is connected to, and using, a specific cube. I know several of the VB/C APIs specify that you must set a cube active (on the connection) before you can use the API.Tim TowApplied OLAP, Inc

  • Cisco IOS NTP: "show ntp associations" versus "show ntp status"

    what is the difference of the commands "show ntp ass det" and "show ntp status" ?
    these commands differs on the referenced time source.
    switch#sh ntp ass detail
    Load for five secs: 17%/4%; one minute: 20%; five minutes: 20%
    Time source is NTP, 10:45:15.469 MET Tue Feb 4 2014
    10.1.5.4 configured, ipv4, sane, valid, stratum 2
    ref ID 154.71.99.39   , time D69B3383.9D414772 (10:38:11.614 MET Tue Feb 4 2014)
    our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
    root delay 0.38 msec, root disp 5.93, reach 377, sync dist 11.77
    delay 0.84 msec, offset 0.3778 msec, dispersion 1.06, jitter 0.97 msec
    precision 2**21, version 4
    assoc id 26601, assoc name 10.1.5.4
    assoc in packets 12339, assoc out packets 12361, assoc error packets 28
    org time 00000000.00000000 (01:00:00.000 MET Mon Jan 1 1900)
    rec time D69B347C.4ACDE42A (10:42:20.292 MET Tue Feb 4 2014)
    xmt time D69B347C.4ACDE42A (10:42:20.292 MET Tue Feb 4 2014)
    filtdelay =     0.88    0.87    0.85    0.90    0.84    0.90    0.89    0.87
    filtoffset =    0.31    0.31    0.32    0.28    0.37    0.32    0.25    0.31
    filterror =     0.97    1.00    1.03    1.06    1.09    1.12    1.15    1.18
    minpoll = 6, maxpoll = 10
    FD8C:2208:32F7:8EA::5 configured, ipv6, our_master, sane, valid, stratum 1
    ref ID .PPS., time D69B318B.92FDD88A (10:29:47.574 MET Tue Feb 4 2014)
    our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
    root delay 0.00 msec, root disp 0.42, reach 377, sync dist 17.18
    c4507r01#show ntp status
    Load for five secs: 19%/4%; one minute: 20%; five minutes: 20%
    Time source is NTP, 10:42:03.441 MET Tue Feb 4 2014
    Clock is synchronized, stratum 2, reference is 81.201.114.7
    nominal freq is 250.0000 Hz, actual freq is 249.9987 Hz, precision is 2**10
    ntp uptime is 752342800 (1/100 of seconds), resolution is 4016
    reference time is D69B2950.47571873 (09:54:40.278 MET Tue Feb 4 2014)
    clock offset is 0.9771 msec, root delay is 0.94 msec
    root dispersion is 47.43 msec, peer dispersion is 1.03 msec
    loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000005068 s/s
    system poll interval is 1024, last update was 2881 sec ago.
    switch#sh ntp associations
    Load for five secs: 18%/4%; one minute: 20%; five minutes: 20%
    Time source is NTP, 10:53:12.750 MET Tue Feb 4 2014
      address         ref clock       st   when   poll reach  delay  offset   disp
    +~10.1.5.4      154.71.99.39     2    690   1024   377  0.848   0.377  1.069
    *~FD8C:2208:32F7:8EA::5
                      .PPS.            1    400   1024   377  0.931   0.892  1.007
    * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured

    Its hard to find expert on switches/IOS on the Network Management Forum, which is for NMS applications.
    You should post this thread on Switching community of CSC forum.
    Though, what i can suggest is to use SNTP.  Certain low-end Cisco devices only support SNTP. SNTP is a simplified, client-only version of NTP. SNTP can only receive the time from NTP servers and cannot be used to provide time services to other systems. SNTP typically provides time within 100 milliseconds of the accurate time. In addition, SNTP does not authenticate traffic, although you can configure extended access lists to provide some protection. An SNTP client is more vulnerable to misbehaving servers than an NTP client and should only be used in situations where strong authentication is not required.
    SNTP may not be much of an alternative because it is not widely supported in software.
    You can use command # sntp server. SNTP generally is supported on those platforms that do not provide support for NTP.
    Device (config)# sntp server {address | hostname} [version number]
    For more clarification post this to Lan Switching and Routing section.
    -Thanks
    Vinod
    **Rating Encourages contributors, and its really free. **

  • I want to suppress the page loading status

    Firefox shows the page loading status as a popup on the left bottom corner of the window. I want to switch off this feature, but cannot find a way to do this, it is not in the options.

    ''suppress page loading status, in lower left corner''
    You can hide/show the add-ons bar (formerly status bar) with "Ctrl+/", which is the same as ["Alt"] > View > Toolbars > (check on/off) Add-ons bar
    For more control over the add-ons bar try the "'''Status-4-Evar'''" extension (34KB)
    *https://addons.mozilla.org/firefox/addon/235283/
    * Status-4-Evar Addon Bar Customization<br>http://dmcritchie.mvps.org/firefox/status4evar.htm

  • How to get rid of the loading status at the bottom

    The loading status is like how it is in chrome now. I absolutely hate that. I use the addon bar, so why can't i put it back into the addon bar. Its just additional stuff i dont need. I would also like it to be where if you hover over a link you can see it before you open it in the addon bar instead of the address bar. Problem with it being in the address bar is i can't see the whole link address.

    See also http://forums.mozillazine.org/viewtopic.php?f=23&t=2087945

  • Delivery Document has been created - showing the status of Being Processed.

    Hi All.
    I am facing the following typical problem.
    1. Sales order has been created - showing the status of COMPLETED.
    2. Delivery Document has been created - showing the status of Being Processed.
    3. Goods Issue document created successfully- showing status as COMPLETE
    4. Billing Document has created successfully - showing the status as COMPLETED.
    5. Customer Account got updated properly.
    Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
    If I go T-code Vlo3n see document flow
    Delivery 5080789885 being processed.
    Go to VF03 document flow also it is showing
    Delivery 5080789885 being processed.
    Aditya

    Hi ALL,
    Further to my query I would like to clarify the following:
    It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
    It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
    1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
    2. I checked the Header Level data completed and Item Level data being processed.
    3. If I look into the each item level also it is showing as being processed.
    4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
    5. Removed credit check in delivery.
    The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
    Aditya.

  • I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

    I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?    

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

  • How to show network status in top toolbar?

    how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help

    Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
    I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
    I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here.

  • TS1398 I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays "C

    I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
    Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
    This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.

    We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!

Maybe you are looking for