CRM IMG nodes are missing in SOLAR01 - configuration Tab

hi Experts
i am facing very strange issue. I am trying to link IMG nodes from the backend system in configuration tab.
the IMG nodes are available in backend system from SPRO , whereas when i try to add the IMG object from the configuration Tab in solar01, these nodes are not available for the selection.
Does any body faced these kind of situation.
Please help with the solution
Thanks
Sol man

Hi,
Make sure that those nodes are selected in the IMG project scope. This can be seen at SPRO_ADMIN for the IMG project, under tab "scope".
If the nodes are not selected, select them and generate the project IMG.
best regards,
Fabricius

Similar Messages

Positions and BPartners in CRM Org Hier are missing in BW after extraction

Hi BW experts,
When I load CRM Organisational Hierarchy from CRM 7.0 system through datasource 0CRM_ORGUNIT_HR01_HIER into BW 7,01 system, only the organisational units such as Property Sales, Team 1, Team 2 etc were loaded into BW. Positions such as Team Leader and Sales Executives which are assigned to their respective teams ie. Team 1, Team 2 etc were missing in BW. Likewise, Business Partners ie. the staffs which are assigned to these positions in CRM were also not in BW.
Please let me know if you have encountered this issue and the steps you took to fix it.
Thanks very much,
Rdgs,
Anthony

Hi Anthony, although i cannot provide a solution yet i´m also trying to find a solution. Did you finally solved this point ?. Maybe this link could help you if yo still are looking for it.
https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=681722
http://www.biportal.org/sap_bi_blog?mode=PostView&bmi=22716
Hope it helps.
If you have been able to solve it please tell me the steps. I wouldl appreciate it.
Regards,
Joaquin

In elements 11 all my icons are missing under the expert tab in the panel bins, How can I get these back?

I'm using Photoshop Elements 11 and I'm wanting to add some effects and graphics. I went under the expert tab and the panel bin for the effect and graphics seems like it's not loading the icons/options, it's just blank. How can I get the panel bin to display the effects and graphics options?

Go to
C:\ProgramData\Adobe\Photoshop Elements\11.0
and delete the
ThumbDatabase.db3
Then go to
C:\ProgramData\Adobe\Photoshop Elements\11.0\Locale\en_us
and delete the
MediaDatabase.db3
Then start the photoshop elements 11 editor and wait till the effects database rebuilds, which could take awhile, like 10 to 20 minutes, so just pse 11 idle so to speak until it completes.

Img nodes

Hi Solution Manager Experts,
We are using Solution Manager for SAP Configuration & Testing .
The IMG nodes are created at Business Process Level in the CONFIGURATION TAB.
Can the IMG nodes that are created for one Business Process, be re-used /copied to an another
Business Process in Solution Manager.?? .
Thanks in advance your answers.
Thanks and Regards,
Umesh Karane.
SAP SD Consultant.

Umesh,
You can do this at both business process level or at another project level in Sol man.
In both the cases you have to take 'projects' in the drop down which exists on the right hand side in blueprinting phase (SOURCE).This shall take you to the project as suggested by you and then will give you an option to copy the blueprint structure of the project.This structure then will get copied onto your project and the IMG nodes shall also get copied in the config phase of your project.
Write back in case the problem persists...it shouldnt!
Mukhraj

The boxes representing my screen displays in arrangement tab are missing

Hey guys, the blue boxes that represent the two displays that i have are missing in the arrangement tab. my computer will not let me move my cusor between the monitors, but i still see my desktop backround. and if I turn on mirroring it works fine. anyone know how to fix this? thanks

Click "View" in the Menu Bar at the top of your Firefox window, if there is no check mark next to "Status Bar", click on "Status Bar" to place a check mark. Did that solve your problem?
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

Missing IMG node for Scenario definition

We are currently configuring FIORI PR approval and the IMG node for Scenario Definition under Task Gateway Service is missing. Components installed as well as the IMG screenshot is below. Any thoughts on what would be missing is appreciated.
Tags edited by: Michael Appleby

FYI.
I see you use old UI components which were released in May 2013.
Important Note: Please use new UI with new SAP Fiori Launchpad
New UI components have UI extension points and work with new SAP Fiori Launchpad.
Please find correct components based on your Backend version.
SAP Fiori - Add-on quick reference for transactional apps
Regards, Masa
SAP Customer Experience Group - CEG

SPRO Customer IMG Nodes Missing

Hi all, i created some nodes in SIMGH for some maintenaces Ztables. But last week our customer did an update or applied some patches, and now the links in SPRO/IMG are missing, the entries that i created are in the tables as TFM18 or CUS_IMGACH, but the links are missing.
Could you please help me!!!!
thnks in advanced.
BR!

thanks you!! and in this cases, do you know how restore them??

Where used list is not working for IMG nodes/Document in solar01

hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol man

Hello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius

Custom nodes are deleted for IMG after upgrade

Gurus,
We are in processes of upgrading form ECC5 to ECCC6.
In ECC5 we have custom node in IMG , which were created using SIMGH.
After the upgrade all the custom nodes are deleted , is there a way to retrieve the custom node or is there a way custom node are not touched during upgrade .
Thanks for the help in advance.
KJ

Hi Ketan,
You have used transaction SIMGH for modifying the SAP reference IMG in the old release. Those modifications gets lost
while upgrading your system. Right?
Even these custom node disappeared from IMG structure, but the customerspecific IMG structures or IMG-activities should be
still available within the upgraded system. That means, you only need to reassign your IMG structures or IMG-activities with transaction S_IMG_EXTENSION .
Those enhancements do not get lost with the next upgrade in future.
With Best Regards
Julia Song

SCCM Client Configuration Tab missing and actions are also missing

Hello All,
Stuck from few days in installation of Client in Secondary Site. Actions are missing in tab and Configuration Tab is also missing.
1. Boundaries and Boundaries Group are properly configured
1a. Client Push installation is performed through Primary Site
2. Client Push Account has Administrative Rights (Verified from CCM Log file)
3. Installation performed successfully (Verified from Log file)
4. Firewall settings are configured proper.
5. WMI repository is consistent.
6. Machine restart several times but no result
Snapshots are attached for your further reference
Need your suggestions / Help.
REGARDS DANISH DANIE

CCMEval.log File
==========[ ccmeval started in process 2304 ]====================================
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
ccmeval version: 5.0.7958.1000 CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Loading manifest file: C:\Windows\CCM\CcmEval.xml
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Successfully loaded ccmeval manifest file. CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Begin evaluating client health rules. CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Successfully retrieved all client health checks.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {4AB7D77D-3BB0-4EAB-BEFD-7C0F7DA10296} : Verify WMI service exists.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {518C0699-03F8-4F38-85C4-4D319EAEFC05} : Verify/Remediate WMI service startup type.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {7F4B6E15-2221-455B-9615-93C379E470D5} : Verify/Remediate WMI service status.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {14E6774A-1795-4E09-B17D-B6F36A124205} : WMI Repository Read/Write Test.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {690A959D-6210-4930-865F-E3BB82F02133} : Verify/Remediate client WMI provider.
CcmEval 8/22/2014 12:03:43 AM
1620 (0x0654)
Evaluating health check rule {A81778B5-9A1E-4A52-9C6E-6939CEFAA118} : WMI Repository Integrity Test.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {5CC6C949-5001-4765-84B4-DD4FDC1E6940} : Verify BITS exists.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {C6E29CF5-F9B2-450B-AE61-C4B256A75023} : Verify/Remediate BITS startup type.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {2F373187-6295-4CBB-BE9E-8E43C459883A} : Verify/Remediate client prerequisites.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {AD9CAF50-6602-4857-A9F4-64864EA30BDF} : Verify/Remediate client installation.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {8883C683-04C8-4228-BB76-2EDD666BA781} : Verify SMS Agent Host service exists.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {13F46523-5B82-417d-A363-A644E80CAD76} : Verify/Remediate SMS Agent Host service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {70BECB51-44A1-4b46-8A23-6EA3D345B677} : Verify/Remediate SMS Agent Host service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {C35E790D-4C05-40A8-BB46-A68578966D19} : WMI Event Sink Test.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {0614757F-7AA6-4933-965B-06D6A8243D0B} : Microsoft Policy Platform WMI Integrity Test.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {7EF00FDD-3DF0-496A-A999-AADD1B3016C1} : Verify/Remediate Microsoft Policy Platform Service Existence.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {D9D0245D-0617-4C2F-8837-84A397AC5B22} : Verify/Remediate Microsoft Policy Platform service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {09886543-BE8B-431F-BC00-7D917632E22C} : Verify/Remediate Antimalware service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {5B50566C-363E-4F1C-8A7D-6F2D2A51B142} : Verify/Remediate Antimalware service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {6BC824B4-BD8C-4779-BB10-ABDBCD5AFAEB} : Verify/Remediate Network Inspection service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Failed to get SOFTWARE\Policies\Microsoft\Microsoft Antimalware\Real-Time Protection\DisableIntrusionPreventionSystem
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {D6CB32EA-423D-44CB-9C58-97CE55D2148E} : Verify/Remediate Windows Update service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {E8030BE0-B773-4742-B6A1-0870CF139117} : Verify/Remediate Windows Update service startup type on Windows 8.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {9040BA8C-580D-4FCA-8846-BBD5F5BB1597} : Verify/Remediate Configuration Manager Remote Control service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {9DCD49EF-E021-46FF-A777-49210B558527} : Verify/Remediate Configuration Manager Remote Control service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {934F12E3-295E-4BA0-AE0F-09859685720F} : Verify/Remediate Configuration Manager Proxy service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {43029EED-EB9D-4E35-A5F7-7FDD93EC8C57} : Verify/Remediate Configuration Manager Proxy service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {7B9F8FF6-EDF7-42CA-A67F-073A2E161C19} : Verify/Remediate SQL CE database is healthy.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Successfully evaluated all client health rules.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Fail to get integer from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get MPFailCount from registry, restart counting from 0
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Client is set to use HTTPS when available. The current state is 224.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Client is set to use HTTPS when available. The current state is 224.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:8E1768FD-5FB5-4191-A804-F26D05EB636C";
DateTime = "20140821190415.358000+000";
HostName = "uekkisc001.uead.uep.com.pk";
HRESULT = "0x00000000";
ProcessID = 2304;
StatusCode = 0;
ThreadID = 1620;
CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Client's current MP is http://uekkisc001.uead.uep.com.pk and is accessible
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
MP check succeeded CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Send previous report if needed. CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get time from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Can't determine whether previous sent succeed, assume sent failed
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Fail to get string from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
There is no previous report sent CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get time from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Can't determine whether previous sent succeed, assume sent failed
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Previous send is not complete, need to send report this time.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Begin to send client health status report CcmEval
8/22/2014 12:04:16 AM 1620 (0x0654)
Successfully sent client health status as a state message.
CcmEval 8/22/2014 12:04:16 AM
1620 (0x0654)
==========[ ccmeval finished normally in process 2304 ]==========================
CcmEval 8/22/2014 12:04:16 AM
1620 (0x0654)
REGARDS DANISH DANIE

Associations for the selected entity are missing since ADP not configured

Hi All,
I am using OEM 12.0.1.0 and have created one composite application consisting one SOA composite and one web service. I have deployed and registered ADP manager and ADP agent also. On my composite application whn I am selecting "Service topology" from the menu of composite application, and in the topologi when I am selecting one element its giving me the following information *"Associations for the selected entity are missing since Application Dependency and Performance (ADP) is not configured. Please check the logs for more details."*
But O have deployed ADP manager and ADP agent and registered the ADP manager also. What can be the issue with this? Have anyone of you any idea??
Thanks in Advance!!

I am not clear what you mean by "selecting one element". Can you upload a screenshot with the error that you are seeing?

Product Configurator tab missing in Sales Order in ICWC for complaints

Hello
Our environment - ECC 6.0 & CRM 6.0
We have variant config items created in ECC & downloaded to CRM via Knowledgebase & runtime versions.
The customer service reps place the order via ICWC.
Till now only standard sales orders were being created in CRM ICWC and the Credit Memos were created using Transaction launcher.
Now we are trying to move the creation of Credit Memo's in CRM via the complaints function.
I am running into an issue while testing Variant Config items in a Credit Memo in the ICWC. I get an error saying Configuration for the Item missing. I am not able to find the Configuration tab in the Order.
When I place the same item in a Standard Sales order, the Configuration tab shows up and I can select my option and all works fine.
Is there any setting specific to the transaction types or Item type for a Credit Memo ?
Can anyone let me know what I am missing ?
Thanks in advance
Vinit

Hello Vinit
I will add the most simple case to create a new configuration:
A role configuration key must be created in path
IMG-CRM-UI Framework -- Technical role definition -- Define role configuration key
The role configuration key must be assigned to your business role in
IMG-CRM-UI Framework -- Business roles --Define business role
Then to create the configuration:
Transaction bsp_wd_cmpwb
`component BT162I_CPL
Btn display
Go to views and double click BT162I_CPL/CreditItemOVViewSet
Tab configuration
New configuration
Role Config. Key <Your role configuration key>
Component Usage <DEFAULT>
Object Type <DEFAULT>
Object Subtype <DEFAULT>
Type: Overview page
Then use the arrows to move available assignment blocks to displayed assignment blocks
You can also use load option to decide if the assignment block will be initially displayed or the end user must press one click to display it.
Btn Save
The configuration is saved and will be displayed if you enter the web UI with the business role that was assigned to your role configuration key.
Another option instead of creating a new configuration for the view is to copy the configuration from the standard one and then make changes to it, but I am not sure if it would work in this case because the standard configuration was created before the note had been implemented. For this you should use button "Copy configuration"
Best Regards
Luis Rivera

CRM 7.0: set up IPC product configuration

Dear experts,
we set up a CRM 7.0 with ERP 6.0 backend integration. In the ERP we apply ERP variant configuration (Materials). Quite simple: some configurable materials (material type KMAT) with a few characteristics and product variants of them (material type FERT) which are maintained in order processing. Variant conditions are maintained and automatically determined for product items. Now we need this in CRM for opportunity processing.
Therefore we have created Knowledge Base and Runtime Version for the configurable products in ERP and downloaded test materials (one KMAT and one FERT (product variant) into CRM (download objects MATERIAL and SCE). In CRM product master data maintenance for the KMATconfigurable tab with the configuration profile is displayed. Afterwards we downloaded condition master data into CRM, among others variant condition VA00 with condition table A057. Everything looks fine.
In CRM we want to set up opportunity management. In the opprotunity transaction processing pricing is working already besides the determination of variant pricing. As we intend to maintain only FERT materials (product variants)we do not need interactive product configuration in CRM sales order or product simulation in CRM product master data. We only want the variant prices to be determined automatically for the product variants (FERT) in opportunity processing. That is why we are not sure if it necessary to set IPC configuration settings (XCM etc.). This is my first question. Nevertheless we started to maintain settings for product configuration in order to find out if this is solves our problem:
1.) XCM configuration (IPC): we set up a customer application for "crmproductsimulation" and defined customer components jco (RFC test worked) and productvariants and restarted J2EE Instance in TX: SMICM
2.) We set up product configuration customizing:
table: COMM_IPC_PROP: caller; crmproductsimulation; scenario.xcm; ZCRMproductssimulation
table: COMM_IPC_URL: UI_CFG; http://<host>:<port>100/ipc/ipc/command.do
When starting simulation of product model for configurable product in TX: COMMPR01 I get following error message: "HTTP500: ISA Framework: The [XCM application configuration]='ZCRMproductssimulation' does not exist. Check XCM configuration.
Details: No details available". This application is maintained in XCM so I assume something else is missing.
To sum up my questions:
1.) Is it necessary to set up IPC product configuration as described above when we only want to maintain FERT products which are product variants and determine corresponding variant prices (VA00). No interactive product configuration is necessary.
2.) If it is necessary to set up IPC product configuration to active product configuration (to see product variants in product master data maintenance and opportunity processing and corresponding variant condition data), what did I do wrong?
Thank you very much for your help.
KInd regards,
Mark

Hi Arup,
thank you very much for your reply.
Concerning XCM / CRM customizing I have done the steps you recommended:
1. XCM: I created customer applications for crmordermaintain and crmproductsimulation and maintained customer component JCO for both of them (Assigned JCO User has SAPALL / SAPNEW, test run was successful) Active and default are ticked. Are there any further steps missing.May be in General Application Settings > Customer > ipcwebappconfig - I changed nothing there (SSLenabled: true)
2. In CRM customizing I maintained tables as follows:
COMM_IPC_PROP:
caller crmordermaintain scenario.xcm Zcrmordermaintain (name of customer xcm app -case sensitive)
caller crmproductsimulation scenario.xcm Zcrmproductsimulation (name of customer xcm app -case sensitive)
COMM_IPC_URL:
Destination: UI_CFG ;Appl. <blank>; URL: http://<host>:<J2EEport/ipc/ipc/command.do
Calling the IPC product configuration e.g. from the CRM product master (simulate model), I get the already mentioned HTTP error:"ISA Framework: The [XCM application configuration]='Zcrmproductsimulation' does not exist. Check XCM configuration.".
That's why I am thinking that something is missing concerning the communication between CRM application and IPC,because XCM applications do definitely exist.
Is the URL correct .../ipc/ipc/commando.do which I maintained in table COMM_IPC_URL?
Is it possible to check if communication between CRM Online and Java does work respectively what do you exactly mean by "IPC URL must be available for UI_CFG"? UI_CFG ist a RFC-connection which has to be maintained additionaly and if so what has to be maintained exactly?
You mentioned a RFC_USER (This is the JCO-User I suppose?)and J2ee user. Is the J2ee user just the admin user of the J2EE engine or do you mean something different?
Thanks in advance for your further help.
Best regards,
Mark
Edited by: Mark Willhoeft on Jun 4, 2010 8:36 PM
Just one further thing: After changing XCM config I restarted J2EE by TX SMICM (Administration - J2EE Instance local - Send soft shutdown - with restart). Is this enough to restart J2EE and activate changed XCM settings or has the restart to be handled different?

Please guide me:LWF NODE IS MISSING

Dear Experts,
We have applied new Support packages : BASIS - SAPKB62062 and
SAPKB62063 ABAP - SAPKA62062 and SAPKA62063
HR - SAPKE47045 to SAPKE47074
But in spro LWF (Labour Welfare Fund ) node was missing and system was
showing an run time error.
I have gone through the SAP note 973398 and done IMG changes in Tables
: V_7In0p_all, V_t7INU1, V_T7INU3 and (V_T7INU5)
BASE WAGE TYPE:Created base wage type by copying /140
SM30:
table V_512W_D maintained the processing class 20 with specification
3 for wage type basis and checked the cumulation class 40.
PE51:
I have edited the HR form and transferred the wage type
Schema Changes:
I have made changes to Schema IN00> INN1 we have delimited the old
LWF funaction INLWF and incerted new function as per sap note as
INUCD -
here i have maintained the parameter LWF, basis wagetype , -- and
01 (Universal grouping).
PCR Change : Sytem was throughing an error saying that "STOP: No rule
in key INCS******".
I have copied INCS and created ZNCS incerted basis wagetype init.
now while running payroll error is not there,
but wage type is not appearing either in RT table or in payslip,
has any one come across LWF missing , what are the steps you have followed.
I am missing something.
Please guide me.
Thanks in advance
Paramshetty.

hiii,
Please find the screeshot.Differeniace is coming in the tax on totl income as after calculaton it should be arnd 19k,Please help.
I hope screenshots are clear to you.
Thanks

Dispatcher/server folders are missing under j2ee\cluster

Hi Experts,
We had one portal system and we found the dispatcher, server0, server1 folder and the instance.properties file were missing from one of the instance server.
Another symptom was that we can not see the instance in the configtool. We did't know what happened, could be deleted by someone accidently.
We had daily backup of the disk drivers, so we could restore the whole folder. My question is, we can not even see the instance in configtool, does it mean the instance was also missing on the database? Could restore the whole cluster folder work in this case?
Thanks,
Jason
Edited by: Jason Wu on Nov 3, 2010 9:14 AM

You won't see any server node in config tool if the configuration files are missing. You should be able to restore the missing folders from your last successful backup. You can check the system logs who has logged on to your system and should be able to trace the culprit.

CRM IMG nodes are missing in SOLAR01 - configuration Tab

Similar Messages

Maybe you are looking for