CRM Interfaces SD with CRM

Hi Gurus,
Can any one Explain SD and CRM Interface with step by step.
Like,
It we do any Transaction in CRM how it will get Update in R/3.?
Or,
If we want Retrive Data from CRM to SD what steps?
Like,
We Maintain Partner Determination Procedure in SD how it will get Uploaded to CRM on what Basis?

Three question, one answer [CRM Middleware|http://help.sap.com/saphelp_crm60/helpdata/en/c3/95fc381478ab6fe10000000a11402f/content.htm] See this SAP Help on the integration of CRM and R/3 (SD).
R/3 and CRM are integrated very nicely and the middleware helps to integrate
Configuration data
Master data
Transaction data
One can do Initial download of all of the above and set up Delta downloads of Master and transaction data (I am not sure about delta of configuration data).
You can also configure the middleware adapter to filter master and transaction data and you can also configure the flow of data - like Business partner data comes from R/3 to CRM and not the reverse. Sales Order changes flow back and forth - this too is configurable.
Pricing procedures, Pricing conditions, Codition records are all downloadable from R/3 into CRM.
There experts who havae spent their whole life time on CRM middleware. Start from the [CRM Middleware help document|http://help.sap.com/saphelp_crm60/helpdata/en/c3/95fc381478ab6fe10000000a11402f/content.htm].
Easwar Ram
http://www.parxlns.com

Similar Messages

Vertex integration with CRM 5.0 - Need Configuration document

Hi CRM Gurus
I need to interface Vertex to SAP CRM 5.0. I am implementing E Commerce (B2B / B2C). We have R/3 - 4.7 and has Vertex.
1) Do i have to interface the Vertex with TTE for the tax determination in the web shop? (If yes, how to do this, need config documents)
2) Do i have to interface Vertex with CRM 5.0 with RFC connectivity?
(If yes, how to do this, need config documents)
3) Does Web store depend on R/3 interface of Vertex for tax jurisdiction determination while a B2C consumer registers in the web store (or) does the web store uses TTE interface with Vertex?
Many thanks in advance.
With Regards
Keerthi
507-401-1030 (Chicago, IL)

Hi
This may be of some help:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/71/fc2f38cec1f705e10000009b38f8cf/frameset.htm

Upgrade from CRM 4.0 to CRM 7.0 and disconnect mobile sales

Hi
With CRM 7.0 we want to utilize the web UI and stop using Mobile Sales. This means we will no longer need the comms station or workbench machines. Assuption is that with links to EEC6 from CRM 7.0 we no longer need to download sales orders and that CDB is redundant so mobile bridge can be turned off..
Has anyone done this before ? Do we need to be aare of anything ?
Best Regards
M

Hi,
we are also plan to do the same - replace CRM 4 MSA with CRM 7 Web UI. Technical Topics are more planning and checking: How does the User access the Solution (Netbook and UMTS), global availability, closing Mobile Bridge and deleting CDB Tables, check your Z Reports - some Developer used smo Tables which are not updated after the Upgrade. Plus Organizational challenges: With MSA you could do Rolloutwaves - Now for Example Frday Evening shut down all MSA User -> Monday morning All Users Go Live with CRM Web UI. This has to be handled (incl. deinstall/disable of TS Mobile) incl. Training and Support effort
Hope that helps for the Start
Andreas

CRM Open Interface Tables for Integrating with CRM

HI all, We are evaluating integration with CRM from Telco Billing system. The TRMs of CRM talk about using some published open Interface table in CRM. I could not find any TRM or User manual where I can get this info.
Also need to know API for CRM for intregation. PL. reply to [email protected] . Thanks - Pradip

I think you also need V14496-01 Part 1 of 2 and V14496-01 Part 2 of 2 (English Language Extension Packs).
Installation is explained in the Bookshelf: V29095-01

How to attach java program with CRM OD

Hi
i have a java program that i want to attach with CRM OD user interface so that i can run it on the press of a button or through any other way. Please suggest me some way to do this.

Hi,
The web applet and web tabs features allow you to embed content within CRM On Demand. You can develop an interface to your code (i.e. HTML page containing a button that will invoke your java application) which can appear within the CRMOD UI using these features.
Thanks,
Sean

Link between Oracle Forms(6i/9ids) with CRM on Demand

Can I connect oracle forms 6i or 9ids with CRM On Demand through web link or any other way? if yes how is it possible?

How you link Forms applications to other applications usually depends on what interface that 3rd party application exposes to Forms. For example, if functionality is exposed via a web service then Forms can quite easily call a web service. But the answer depends on how CRM exposes its functionality.
Regards
Grant

Number for bDocs processed per hour in custom interface to SAP CRM from Tibco

Hello Experts,
Could you please let me know the ideal Number for bDocs processed per hour for a interface which has SAP CRM and TIBCO.
The intent is to use to most easy to scale technology for a custom interface to SAP CRM from Tibco .
I did check the forums but was not able to get a definitive answer.
I understand that it is not possible to quantify the exact number of BDocs that can be processed in an hour,but could you please let me know the factors on which it depends.
Regards,
Akash

It depends on type of data you want to process and the size of your hardware. My rule of thumb is that you should be able to do at least 1 BDOC per second in a worst case scenario or 3600 records for a small size system. Keep in mind the biggest bottleneck is the database update/lookup times. A properly sized large system, could do much more volume. Your best bet is put in the desired transactional throughput into the SAP quicksizer and then work with your SAP hardware partner to approriately size your production box.
If you already have hardware for production bought/existing, then find out the current SAPS rating for your hardware and then use the quicksizer to determine the target SAPS needed to meet your requirements.
Take care,
Stephen

Is it possible to connect R/3 4.6c with CRM 7.0 EHP 1 to use Webchannel

Hi Team,
As per release notes of EHP1 for CRM 7.0 it is understood that, minimum ERP version required is
: SAP R/3 Enterprise 4.7 Extension Set 1.10. to connect to CRM 7.0(EHP1).
Question: In any way is it possible to use R/3 4.6C with CRM 7.0 EHP1for Webchannel scenario.?
Please share any information on this scenario if anyone is aware.
Thanks in advance.
Points would be rewarded.
Thanks,
S.Pingili

Hi,
Check Product Availability Matrix (PAM) on the SAP Service Marketplace under http://service.sap.com/pam.
Note 1147879 - webshop 4.0 and mySAP ERP 2005
Note 1587172 - Maintenance strategy for "SAP E-Commerce 5.0 for SAP R/3"
Denis

Multi resource Scheduling with CRM

Hi MRS Experts,
I am an CRM consultant working on a scenario of resource planning in SAP CRM services. We have a scenario where the user creats a service order in IC web client. As soon as he creates a service order two things should happen:
1) Appoint scheduling based on customer availibility
2) resource (employee) scheduling
Regarding this I have following questions:
1) Can MRS work in this scenarion (resource scheduling in/with SRP CRM?
2) Is it a standard integration?
3) What it takes to integrated MRS with SAP CRM?
4) What data points are required to in mRS from CRM to for resource scheduling and appointment scheduling:?
5) If we are correct WFM is not requred for MRS?
6) How MRS integrates with mobile application fro the service scenario?
7) is it advisibel to use WFM or MRS, with CRM?
PS: Guys its great to have such discussion, the doc links mentioned in the first page do not work.
I would realy appriciate if somebody clarifies the above queries as early aspossible as i am struggling at this point a lot.
Thanks in advance.
Please assist.
Regards
Adi

Hello Aditya,
1) Yes MRS can work with CRM. But with the current release in service market place (whcih is MRS 610) it is not possible to have this as out of the box solution.
You will need to enhance MRS to enable this.
2) With the new release, which is due this year, it will be possible to integrate CRM service orders with MRS.
3) MRS provides more functions with respect to service planning. So I would say MRS should be preferred solution.
Regards
Varun

Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

Hello together,
The system of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
In the Billing Due List a dump occurs when clicking on an item and then on conditions
Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
(Other classes are new generated after the upgrade)
During the Analysis we looked to the billing engine navigator:
In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
BR, Anne

Hi Nawanit,
we checked the key figure settings and categories. Everything is maintained correctly.
Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
"Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
As far as we work with ECC 6.0, EHP4 this message makes no sense.
Does anyone have another idea?
Thanks
Jan

How to Configure and Integrate EP with CRM

Hi Everybody,
I want to integrate EP with CRM.
I am using SAP WAS Server.I have installed Portal.
I downloaded CRM Business packages.
1)How to integrate and configure in the EP with SAP R/3(CRM Module).
2)What are the prerequisities.
Plaese prove the exact help and documents.

Hello,
I think this <a href="http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N12_Scen_InstallGuide_EN_US.doc">Scenario Installation Guide</a> from the <a href="http://help.sap.com/bp_epv260/EP_EN/index.htm">SAP Best Practices for Enterprise Portal V2.60</a> can help you.
Regards
Gregor

Best practice for developing with CRM 2013 (On Premises)

Hello all. I'm just starting to work with CRM, and I have some questions that hopefully will be simple for the seasoned developers. It's mostly just some best practice or general how-to questions for the group.
- When creating a new Visual Studio CRM Project I can connect to my CRM Instance and create new WebResources which deploy to the CRM instance just fine, but how can I pull all the existing items that are in the CRM Solution into the Visual Studio CRM project?
Or do I need to export the solution to a ZIP, expand it with SolutionPackager.exe, then copy these into my Visual Studio project to get it into sync?
- When multiple developers are working on changes is it best to keep everything in a Visual Studio project as I mentioned above, or is it better for everyone to have their own instance of CRM to code with so they can Export/Import solutions as needed then
these solutions be manually merged before moving into a common Test/QA environment?
- When modifying the submenu on a CRM form is it suggested to use Ribbon Workbench or is it better/easier to just export the solution, expand it with SolutionPackager.exe, modify ribbondiff and anything else required for the change, package it
back up, then reimport to CRM? I've heard from some that Ribbon Workbench has some limitations, but being green I wasn't sure what those limitations might be or if it'd be best to just manually make these changes. Or is thre any way to have a copy
of ribbondiff in Visual Studio and deploy this without having to repackage the Solution and Import in the ZIP?
I think that's it for now :) Thanks for any advise or suggestions. I really want to start learning the in's and out's of CRM and how all the pieces fit together. Also can someone direct me to some documentation or books that might give
more insight on developing for CRM 2013 or 2015 (moving to this soon)?
Thanks for your time.

Hi Sam
Also interested in best practice around this area - especially recommended development routes, unit testing, continuous integration etc - it would be great if you posted here if you find any good articles etc. At the moment we tend to just push changes
onto a live system as and when appropriate and I'd prefer to move away from that...
Thanks
Stuart

Upgrade - Installation CRM 7.0 with W2K3 and J2EE AddIn

Hi all,
Because of the end of maintance I have to upgrade CRM 4.0 to CRM 7.0.
During the upgrade phase Iu2019ve detected changes within the CRM System installation and architecture.
First thing I discover was that itu2019s not possible to install CRM 7.0 with the W2K3 64bit OS.
You have to install the system with Windows 2008 Standard 64bit Edition.
All our SAP Systems running with W2K3 64bit OS with very good performance and that is why itu2019s our standard OS.
The different between W2K3 and W2K8 is enormous. (Everyone who changed from WinXP to Win Vista knows what I mean.)
Even the change of the SAP Kernel causes yet unknown problems
But I thought so what, thatu2019s IT and upgraded the ABAP stack to 7.0
The upgrade was fine and finished.
After that I would like to install the missing J2EE Components and TREX.
But the next catch Iu2019ve discovered was that it isnu2019t possible to install the J2EE Engine as an AddIn Installation into the upgraded ABAP Engine.
Wow, thatu2019s a thing!!!!
Our company IT strategy is System consolidating and now I should make 9 out-of 3 systems.
(DEV-QS-PROD Landscape)
Not to mention the administrative complexityu2026.
Now Iu2019m searching for solutions to avoiding this problems.
For the J2EE AddIn installation I want to try a intermediate upgrade to a former CRM Release where a AdIn Inst is possible (e.g. CRM 5.0 or something) and than upgrade to CRM 7.0
But whatu2019s about the prescribed OS W2K8?
As far as I know there is no SAPinst for a CRM 7.0 Upgrade/Installation under W2K3.
Ok, for a company with a huge webshop it makes sense, but our webshop isnu2019t so big that there could be same performance problems.
As noted before, all our SAP Systems running with a W2K3 64bit OS and we donu2019t have performance problems.
Does anyone have an idea how I can solve my CRM 7.0 Inst/Upgrade Problems?
Best regards
Mario Fischer

Hi Mario,
We installed CRM 7.0 a couple of months back with DVD- 51035700 (Master) on a Win 2003 server.
NW 7.01 (base for CRM 7.0) is supported on Win 2K3...but PAM does mention 2008 exclusively for CRM 7.0
As far as the Java Add In is concerned, ABAP & JAVA stacks have been seperated in order to simplify things.
The dual stack was difficult to administer & manage; hence, now you need to install 2 different systems & connect them via JCO.
We had a 16 GB server for CRM 7.0, which instead of hosting one "ABAP+JAVA" system, now has 2 systems (a seperate ABAP system & a seperate JAVA one)..n so far we havn't faced any issues as such.
In fact it's a good thing that since the 2 stacks have been seperated, the dependancy factor's been minimized.
Thanks,
Have a nice day,
S
Edited by: Saba Sheikh on Feb 24, 2010 1:08 PM

Communicate (CRUD) with CRM Online from SharePoint Online

Hi,
I'm working on an offer to a client where I'm considering if I'll recommend SharePoint Online.
Most of the requirements from the client are out of the box SharePoint and doesn't affect the decision to go for SharePoint Online. However, the client has one requirement, which is that they need to be able to update Entities/records in their CRM Online
solution from SharePoint. I'm not sure how those updates should be triggered, but my guess is it should be triggered when an item in a list/document library changes it's status (a status field). This would probably require custom development of some sort (Event
Receiver? Workflow?) which uses the CRM web services.
Is this even possible in SP Online?
I've done a lot of searching for this in Google, but haven't found anything interesting yet. I come across solutions for integration the other way though (FROM CRM to SharePoint), but I need integration with CRM FROM SharePoint.
Thanks!

Hi,
According to your post, my understanding is that you want to communicate SharePoint Online and CRM Online.
We can use the Business Connectivity Services (BCS) to communicate SharePoint Online (SPO) to CRM Online.
The following blog for your reference:
http://blogs.msdn.com/b/girishr/archive/2013/05/13/connecting-sharepoint-online-and-crm-online-using-bcs-2013-edition.aspx
Best Regards
Dennis Guo
TechNet Community Support

Crystal report integration with CRM

Hi, Guru:
I would like to check with you.
I need show a demo to integrate crystal reports with our CRM product.
I know for CRM mobile (mobile system maintenance), we could have this option. however, my requirement is to seek any other options to integrate crystal reports with CRM webclient UI, so just like to check with you if you know how I can start to implement this.
Cheers,
Eric

Hello Eric,
Check
SAP Customizing Implementation Guide -> SAP NetWeaver ® Business Intelligence -> Links to Other Systems -> Crystal Enterprise Integration):
Also,in the following URl you can search for CRYSTAL REPORT.
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Hope this helps!
Regards,
Shanthala Kudva.

CRM Interfaces SD with CRM

Similar Messages

Maybe you are looking for