CRM is unicode R/3 is non-unicode
We are about to install a new CRM 4.0 system based on WAS 6.40 and choose the unicode option. This system will be talking to an R/3 system which is enterprise and is non-unicode. CRM will be accessed via a portal. We will be installing about 18 languages in the CRM system, including Bulgarian, Czech, Slovene, and polish and most West European languages.
The question is what will happen to data which is generated in CRM in one of these languages and transferred into R/3?
Will character substitution occur?
What will happen if this data is updated in R/3 and copied back to CRM? Will it contain the substitutions?
Hello Paul,
we are running our CRM 4.0 with Unicode against a non Unicode R/3 system productive since April 2005. But we only use German on the Portal which is used for the User Interface. Our R/3 is a MDMP system with support for the slowenic charset. But we've filtered the transfer of Buisiness Partner Data by the Sales Org. So no Data with the other Codepage is transfered to our CRM System.
I would advise you to avoid complicated codepage translations in the middleware to upgrade your R/3 to 4.70 with Unicode. Otherwise shure get problems.
Regards
Gregor
Similar Messages
-
CRM IDES Exports data into existing Non IDES System?
Hello,
Is it possible to import SAP CRM IDES data using IDES Exports into any existing non IDES SAP CRM System without re-installation? The thing is that we already have some data in two clients (client 100 and 200) and we don't want to loose it and recently we have received IDES DVD's and would like to have this data as well. So, is there any way to get this IDES data without re-installation?
Thanks and Regards,
VasuNo.
An installation doesn´t know anything about "clients", sapinst deletes the database if it exists and then loads the data from the export DVDs.
Markus -
CRM2007 unicode system display broken charactor downloaded non-unicode R/3.
Hi all
CRM2007 is only unicode system and R/3 is 620 non_unicode system.
CRM2007 unicode system display broken charactor downloaded data from non-unicode R/3.
how can I do??
any help
thanksLee,
Technically it is not supported. You could change a few middleware settings to transmit the bdocs as XML to prevent issues, but really if your CRM is unicode then ERP needs to be unicode and vice-versa.
Only exception is that generally the english code-page non-unicode works okay with unicode english.
You can adjust CRMRFCPAR for the bdoc to transmit in xml vs native.
Take care,
Stephen -
Performance Problems after migration to unicode
Hello,
we have migrated our crm40sp6/msa-system to unicode. But now system is very slow, and the greater problem is that when we replicate via modem and conntrans I often get connection error while receiving data. And when I receive some data, the mas-client is very slowly to import the data. I often do not get all data so that I have to replicate repeatedly.
Before unicode I didn't have this problems.
Does anyone have the same experince with crm/msa-unicode ?
Best reagards
GerdHi Gerd,
You have mentioned that the system is migrated to CRM 4.0 unicode. What do you mean by unicode. Are u able to see in the MAS client several languages in the same screen in CRM 4.0.
I heard that CRM 4.0 is a unicode system but I don't think still you could see different languages in the same screen. For eg display japanese, chinese and english in the same screen.
For your information search on OSS notes you will get a note for Unicode which needs to be applied. Also in general the unicode solution is comparitevly slow when data is transfered from Middleware to mobile client via conntrans as the data is transfered in the XML format which contains more information than the regualar RFC format.
Best regards
Silivia -
CRM server connecting to NON-R/3 servers & R/3 Servers
HI Experts,
Please explain how the r/3 sysytem & CRm system are connected ,
how the crm system & Non -r/3 SYSTEMS are connected.
the above mentioned are connected mainly by SOAP ( Simple object Access Proctocol).
Please explain the conecpt for the above mentioned two
Thanks in advance
Prajith P
Edited by: Prajith Prabhakara on Feb 15, 2011 4:21 AMHello Prajith,
The SAP CRM system with the CRM Middleware and CRM Applications forms the core of CRM System Landscape. The CRM Server can run as a stand-alone solution or with various back-end systems. If SAP ECC is the backend system, only a plug-in(PI_BASIS) is needed to handle the data exchange with the SAP CRM Server.
CRM Server can be connected to non R/3 Back-end through SOAP (Simple Object Access Protocol ), XML, ASCII adapter, BW system, SAP R/3 Back-end through the R/3 adapter.
Other systems may be other ERP systems on non-SAP vendors. While many systems are linked to a CRM Server, they may not always use CRM Middleware functionality. The BW e.g. extracts data from a CRM Server u201Cpassingu201D this data u201Cbyu201D the CRM Middleware, which means it does not use BDocu2019s. The APO System is accessed via qRFC and BAPI calls from a CRM Server, also without the help of CRM Middleware.
Hope that helps.
Regards,
Rohit -
Commstation 5.0 on a CRM 4.0
Hi,
is it possible to connect a Communication station 5.0 to a crm 4.0?
Or is there any other way to get rid of the Windows 2000 servers if you are using the commstation 4.0 with DCOM?
Thanks in advance and Regards
ThomasHi Eddie,
We also want to upgrade our CRM 4.0 SP06 CRM Mobile application to CRM 7.0 (our system is Non-Unicode). Can you please provide the steps you performed for upgrade.
Did you performed unicode conversion before upgrade, or is it not required ?
Was there any challenges you faced, since your system was also not at least SP 07.
Appreciate your help on this.
Regards,
Vikas -
Aggregates on CRM and WM Cubes
Hello Everyone,
Is there anything special about creating aggreates on a CRM cube or WM Cube (with non-*** key figures)?
Meaning anything that will not work or to keep in mind?
Thank you.Hi ,
Check these links
CRM
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm</a>
PP Related
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/6f/5d953fc405330ee10000000a114084/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/6f/5d953fc405330ee10000000a114084/frameset.htm</a>
Thanks & Regards
Renjith Kumar
( Assign Points if helpful) -
Hi all
I have been asked to present a CRM Technical presentation to all the Non-CRM Developers here in my company. This presentation should be more of Technical One than speaking Business/Functional Points.
But i am really donot know, what are the topics to be covered even having idea on SAP CRM Cababilitiies! What are the real Technical areas very important in the CRM ?
Any ideas/Suggestions are really Welcome !
Thanks
JackThanks Animesh !
If you have a Documents/details on FMs Type(_OW or _OB), please let me know or post it to [email protected]
Also the Data Model which i have are in German, Do you have the English Version or any easy way to intepret the German Model ?
Thanks
Jack -
Hi what is ALE how it is useful for SAP CRM?
Hi
Experts can any body tell me what is ALE,SOAP,XML I know the full form Application linking and unabling but how it is useful for CRM Functional Consultants where it used in CRM Scenario?
VenkatHi Venkat,
ALE is a integration Technology used to integrate SAP system with Non SAP Systems.
<b>Definition</b>
Application Link Enabling is the technical basis for integrating business processes in a distributed system environment. It includes developer and testing tools and preconfigured ALE Business Processes delivered in the standard R/3 Release. ALE has functions for managing messaging and for handling communication and application errors.
<i>To find more details about ALE Just Check out the links:</i>
<b>ALE/ IDOC</b>
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
<b>ALE/ IDOC/ XML</b>
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
For CRM Functional Consultant interaction of the CRM system with other SAP and Non-SAP system is a major issue. The consultant takes care of all the details and suggests the possible Integration Technology with the help of a technical consultant. This depends on the CRM scenario as what data ( master, customizing, transaction) you want to transfer to the system.
All these basically falls under the different integration technologies.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b> -
CRM unicode and ECC 6.0 Non unicode.
Hi All,
We have upgraded our system from 4.6C to ECC 6.0
Our ECC 6.0 is non unicode system. We are currently implementing CRM 5.0.
I want to know if we implement unicode CRM system, will there be any inconsistency as our ECC 6.0 is non unicode.
Regards,
ImranHi Imran:
I had a problem with middleware when going through a similar scenario to yours. The middleware functions were returning garbage when calling from CRM to ERP systems. See note 651497 which addresses this problem.
I implemented the fix by adding the following line to the beginning of function module BAPI_CRM_SAVE:
call function 'Z_MW_RFC_PING'.
Create a function group containing function module Z_MW_RFC_PING (code below):
FUNCTION Z_MW_RFC_PING .
*"*"Local Interface:
data:
lv_rfcdest type rfcdest.
* Read middleware parameter table to determine R/3 backend system
* name.
select single parval1
into (lv_rfcdest)
from smofparsfa
where parsfakey eq 'CRMCFSOLTP' and
parname eq 'CRMCFSOLTP'.
* If we get an RFC destination returned, PING it.
if sy-subrc eq 0.
call function 'RFC_PING'
destination lv_rfcdest.
endif.
ENDFUNCTION.
Note 777994 addresses some configuration on CRM system. In transaction R3AC6 on CRM system, make the following entries:
Key SMOF, parameter CODEPAGE_CHECK_OFF, value 'X';
Key R3A_COMMON, parameter CRM_SEND_XML, value 'X';
Key R3A_COMMON, parameter DATA_FORMAT, value 'XML'.
You should also do the following configuration:
In table CRMPAROLTP on ERP system set parameter CRM_SEND_XML_FOR_DEFAULT_DESTINATION, user CRM, value 'X'.
In table CRMRFCPAR on ERP system set the "Use XML" flag to 'X' for the CRM consumer. This also avoids code-page issues.
The above took care of conflicts in code-pages for my systems.
Regards,
D. -
What different IDES systems are available?
Hello.
I know that there is a ECC IDES System available. Is there also a Netweaver Portal Ides Version available? Or an ides system with Netweaver portal, ecc, bi and BW with some prepopulated data and some basic webdynpro within the portal to show ecc, bi and bw content? Is something like that available?
Thanks
DannyHi
Following are the different IDES systems available to-date...
For more details logon to <b>https://websmp205.sap-ag.de/ides</b> - customers & partners (OSS ID required).
New Releases available
IDES SAP ERP 2005 (SAP ECC 6.0) UNICODE
IDES SAP CRM 2005 UNICODE
IDES SAP SRM 5.0 UNICODE
IDES SAP SCM 5.0 UNICODE
IDES SAP ERP 2005 (BW 7.0/SEM 6.0) UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Retail UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Healthcare NON UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for Campus Management
Coming Soon:
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Oil UNICODE
Rgds
Reddy -
BI OnDemand and CRDC Status- Systems are Available
Systems are Available
Edited by: Tony Foster on Oct 24, 2011 9:11 AMHi
Following are the different IDES systems available to-date...
For more details logon to <b>https://websmp205.sap-ag.de/ides</b> - customers & partners (OSS ID required).
New Releases available
IDES SAP ERP 2005 (SAP ECC 6.0) UNICODE
IDES SAP CRM 2005 UNICODE
IDES SAP SRM 5.0 UNICODE
IDES SAP SCM 5.0 UNICODE
IDES SAP ERP 2005 (BW 7.0/SEM 6.0) UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Retail UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Healthcare NON UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for Campus Management
Coming Soon:
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Oil UNICODE
Rgds
Reddy -
PREPARE for Java complains of wrong OS though it is correct for ABAP
Hello Team
I am in the process of upgrading our CRM 5.0 Unicode (Dual Stack -
ABAPJAVA) systems to CRM 2007 Unicode (Dual Stack - ABAPJAVA) system
on a LINUX X84_64 Operating System env.
I am having issues when I start the JPREPARE from the SAP CRM 2007
Upgrade Master DVD on Linux_X86_64 (51033255_19) for the first time as
mentioned in the CRM 2007 Java Upgrade guide. It complains of SAPCAR
file missing and it says OS Linux not supported by this CD.
This is the command I am using - JPREPARE <upgrade directory> from
the Upgrade Master mount point
This is the exact error message I get:- ERROR: Missing
file /sapcd/CRM60_Upg/51033255_19/LINUX_X86_64/SAPCAR. Operating system
Linux not supported by this CD.
where /sapcd/CRM60_Upg/51033255_19/ is the mount point for the SAP CRM
2007 Upgrade Master DVD on Linux_X86_64 (51033255_19)
The upgrade directory is created correctly with
755 permissions and owned by <sid>adm
All it does is it creates a empty exe directory in the upgrade
directory and throws the above mentioned error.
Where as I was able to launch the PREPARE for ABAP succesfully from the
same CRM 2007 Upgrade Master DVD on Linux_X86_64 (51033255_19)
I am in the middle of the PREPARE phase for ABAP and it wanted me to
start the JAVA Prepare phase. I am surprised by this as it did not
throw an error when I started the PREPARE phase for ABAP.
I am stuck with this error and unable to move forward. Can you please
let me know how do I proceed.
Has anyone faced this problem before or am I doing anything wrong here?
Thank you!I was able to get over this by using the DVD - SAP CRM 2007 Java Upgrade for all OS -(51033255_25) upgrade Master DVD.
Thanks! -
Advantages of BW Query in SAP Portal when compared to WEB BEx Analyzer
Hi
What are the advantages of having a BW Query in SAP Portal when compared to WEB BEx Analyzer
I had to presention to higher managers of having a SAPPortal for BW report that WEB BEx Analyzer
can any one please update me with few points (10-20) that will be useful for my presentation
screen to geethikakrishna->gmail
Thanks in advanceHi Krishna ,
I think you should highlight the portal role in presentation
Now a days all organizations using sap portal as their user interface. We can login portal once and we can get all the information from bw,crm...sap systems and non sap systems.
so no need to login each and every system individually.
The portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
For all information on portals refer to help.sap.com->documentation->netweaver->Netweaver2004->English
IN people integration you will find information on portals
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm
check below threads for some information
easiest way to publish
Easiest way to post existing BW queries onto portal
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9d/24ff4009b8f223e10000000a155106/frameset.htm
Execution of BW Reports Through Enterprise Portal
Best Practices for BI Report publishing on Portal - BI 7
Use of BI's Enterprise Portal
The web application designer offers rich functionality for creating dashboards. In SAP NetWeaver BI 2004s (aka 7.0), when you publish a template it is automatically created as an iView for the portal.
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 1
Koti Reddy -
Hi,
Can anyone tell me why we need a BDoc in CRM. As we already have an IDoc concept which is similar to BDoc. Why can't we use the same the IDoc to exchange data with CRM.Hi kumar,
Bdoc concept is the technology used in CRM Middleware where as Idocs used in ALE and EDI. Middleware is used for data exchange with in CRM system and between CRM and any other sap or non-sap system.
Please also look into the following sap help link which gives the differences between BDoc and IDoc messages
http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
<b>Reward points if it helps</b>
Murali
Maybe you are looking for
-
How to find out Black white Image??
Hi All, I am Prashant I have bunch of images in one folder form the bunch of images I want to find out color images and black and white images. Can u help me plz???? Thanking you Prashnat
-
HR ABAP ( Employee services)
Hi, In my selection screen i gave date field (DD/MM/YYYY) in that the user will enter the date and i found employee services using 'HR_SEN_CRULE_0100_DURATION' this call function.But now the user need in selection screen period (MM/YY). Is there
-
DB Connect Data featching problem
Hi all, I connect Sql2000 to BW server and trying to make a report for this i have done all the things i mean to say make infosource , cube , update rule . in sql data source i take 2 fields for data selection ID and Name when i make infopkg these tw
-
Making the background transparent in export from cinema 4d to AE CC
I'm using Cinema 4D to create a 3d object and then import it into AE CC. When I import it in, the grey grid in the background is visible. I want to make the background transparent, so that all you can see is the object in AE. How can I do this?
-
DB block corruption by using OEM
1. OEM can discover database block corruption, but I wasn't sure if whether db_block_checking and db_block_checksum need to be set in order for OEM to discover corruption or we don't have to set this parameter. 2. If we set db_block_checksum and db_b