CRM/ISU: Notes (or Texts) at Connection Object Level and replication

Hi there,
I am trying to replicate to CRM (and back to ISU) the Text objects linked against the Connection Object in ISU.
The idea is to have two texts area in the Connection Object in the WebIC that can be replicated back to the related ISU's ones.
The requirement is to replicate those texts (multiline texts, textarea, notes) linked against the Connection Object from CRM to ISU.
The connection object in CRM is a "casted" Individual Object that can be linked against Notes (or Texts), isn't it?
So the IObjects can have a Notes Assignment Block.
The problem is that from an WebIC point of view the Notes Assignment block obviously are not shown.
Have someone of you done something like that before? Any idea?
Thanks.
Regards,
Carlo.

Hey Bill, thanks for the links.  Question - is the Utilities Check Cockpit available externally?  I try the link but receive an authorization issue using my new S-id
I am trying the following link:
https://service.sap.com/~sapdownload/011000358700001040272011E
Thanks,
James

Similar Messages

  • Validation at View Object level and not Enity Object

    How would you create validation logic at the view object level and not at the entity object level? I have many VOs that reference the same EO and want some validation logic to be applied only to certain VOs.
    Thanks,
    Quoc

    My use case for this is to perform form validation inputted by the user via a JSPX page.

  • I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk.  It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data.  How can I retrieve all the lost data??

    I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk.  It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new).  How can I retrieve all the lost data?? Please help!!

    SkyDaughter29 wrote:
    My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes.  I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need.  It appears Apple does not sync the texts between the iphone and my MacBook Pro.
    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    Best of luck.

  • Object Level and Folder Level Instances Limit on R3?

    Hi there,
    We've been thinking about setting a global limit on instances of 35, but were wondering if we can apply a limit of 50 only on certain reports?
    This is only for reports where the business has justified that they will need to go over that.
    Basically, will object level limits override folder level or even global level limits?
    Many thanks,
    Nawar

    It will override Global level limits.
    Create a User and apply limits to that particular User , so that where ever that user ran a report that limits the instances according to user limit.
    Thanks,
    Anil

  • Just bought the ipad mini, and have the 4s phone. I have synced them, but my contacts did not sync with name connected to them, and I am getting texts on my new device now, but not my phone-what do I need to change?

    How do I delete photos from ipad mini? Also getting texts to my ipad that i just set up, but now not to my 4s. I have synced the devices, but my ipad has contacts listed without phone numbers. What do I need to change?

    go to your iPhone to settings>itunes and app store> check the box which reads automatic download apps.
    This provides for you to automatically download apps and music should you choose that option.
    Click on the area that reads 'use cellular data when automatically downloading'
    Good luck.

  • When i connect my iphone to itune, it shown Apple Mobile Device not yet started, cannot connect my ipone and itunes, why?

    when I connect my iphone to the iTunes, it said "Apple Mobile Device" service not yet activated, service cannot start?
    What does it mean? I connect my iphone to iTunes everynight, only tonight this message pop out?

    You can try to start the AMDS by going to task manager (ctrl/alt/delete), Choose the services tab and right click on the AMDS and choose start service. This will sometimes work, but usually iTunues needs to be reinstalled. If you reinstall iTunes, follow this KB how to article --> http://support.apple.com/kb/ht1925

  • I get the error messages: "Server not found" or "Cannot connect to Server" and thus cannot print. I don't even know what a server is.

    Hello: I am not computer savvy.
    I have run "Network Diagnostics" and the message "Cannot connect to Server" comes up. I can connect to the internet. I have tried turning off the whole system and the printer individually and nothing seems to change the message.

    hello,
    i got the same issue i'm using kde the link abe for "Adding a login manager (KDM, GDM, or XDM) to automatically boot on startup" guide is dead
    arkham wrote:Have you tried the inittab approach for starting kdm? http://wiki.archlinux.org/index.php/Add … tab_Method
    could you help me please ?
    Thank you
    Last edited by hael (2012-05-05 08:57:44)

  • Firefox was working fine earlier today and now when I try opening it, I get this message: Firefox does not know how to connect to server" and no pages will load. Internet Explorer works fine.

    I have changed nothing on my computer, and it was opening and functioning fine this morning. However, everytime I try to open it, I get a message box saying "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features." And when the page actually opens, it says "Unexpected response from server
    Firefox doesn't know how to communicate with the server.
    Check to make sure your system has the Personal Security Manager
    installed.
    This might be due to a non-standard configuration on the server."
    Nothing will load and I don't know what's wrong!

    Did Firefox update to 4.0.1?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • I was working with a chat person about a problem of not being able to connect with iTunes and got cut off

    I was working with a apple chat tec and got cut off. How do I get back to that person?

    You probably need to reply to the thread below.
    https://discussions.apple.com/message/23980460#23980460

  • My phone will not send texts to non-iPhone users and it will only send texts to other iPhone users if iMessage is turned on, otherwise it doesn't send texts at all. How do I fix this?

    Help? Have any of you have this problem? How did you remedy it? Thanks in advance!

    I'm on hold with them right now, I'm pretty sure that's the problem I just wanted to see if there could be any other reason. Covering all my bases, as it were. <3

  • Migo is not showing the excise tab - header level and item level

    Hi,
    i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. After saving the document, if i go to dispaly view of the MIGO document system is not showing the header level as well as item level excise amount. The tab itself is not appearing. Can any one help me on this.

    Hi,
    There are two kinds of statuses, system status and user status.
    You can only influence System status if you execute a business transaction that changes the system status.there
    are four system statuses open, In process,Released and Completed.
    User status can be created as additional information to the system status in any numbers.But for this you
    need to define a status profile which would further be assigned to transaction type(header status) and
    item categories(item status).
    The header status is independent of the item status. One exception is the status Completed.
    If all items have the status Completed, the header status is also set to Completed.
    For defining a status profile you need to go to
    SPRO>Customer Relationship Management>Transactions>Basic settings>Status Management.
    Hope this helps.
    Regards
    Sidd

  • Duplicate check for Connection Objects in CRM

    Hi,
    I want to implement a duplicate check for connection objects in CRM. The duplicate check shall use the address of the connection object and perhaps additonal attributes. I have found a duplicate check for business partners using the basis address service and TREX as index pool. However, I couldn't find a similar functionality for connection objects. Does somebody know:
    1) How to implement a duplicate check for connection objects which is based on the address of the connection object?
    2) Is there a way to use the TREX-based duplicate check which is integrated into the basis address service for connection objects?
    Thanks in advance!
    Best regards,
    Frank

    I also have a requirement to check for duplicate address at connection object level and we are using SAP data servies to validate the address. Can anyone share their experience.

  • Change connection object ISU_S_CONNOBJ_CHANGE how does it work? ES 56 Trans

    Hi ,
    I am trying to change connection object details and using the ISU_S_CONNOBJ_CHANGE function module
    it is not updating the values .Kindly suggest!!!!1
    Thanks,
    Pradeep.

    Hi,
    Please call function module ISU_S_CONNOBJ_PROVIDE to populate Y_OBJ and Y_AUTO.
    You would first need to populate the fields which need to be updated in X_AUTO fields and have the OK CODE as 'SAVE'. Then update Y_OBJ parameters as per requirement and pass the values to function module ISU_S_CONNOBJ_CHANGE.
    Alternatively, I suggest to use Master Data Template. Please visit Master Data Template in ISU for more details.
    You can use Master Data Category CONNOBJ for creating Master Data Template. (Transaction code to access it is EPRODCUST). After creation, test your Master Data Template. Then you need to call ISU_PRODUCT_IMPLEMENT with your template.
    Please let me know if this was useful.
    Regards,
    Avinash

  • Connection Object validation

    Hi,
    During the migration of Connection Object, the (postal code and street)data does not match 100% with the Regional Structure data. I have turned off the Street validation using the "Flag Street Directory" from ADRCITY but EMIGALL does not let me migrate connection objects whose postal codes does not already exist. Is there a way to turn this validation off or to circumvent this issue? The problem arises because Regional Structure and Connection Object/Premise are being extracted from two different source systems.

    Hi,
    You  need to turn off the flag "city file active" (IMG -> SAP Netweaver -> General Settings -> Set countries ->  Set country-specific checks. Please check the Guildines ISMW for implication in not having the address validation turned off.
    Cheers,
    Fritz

  • Connection Objects / Functional Location Number ranges Issue

    Hi ALL
    Number range object: ISU_EHAU is related to Connection Object / Functional Location  creation.
    But my client wants to create Connection Object number and functional Location  number with different number range series number.
    Can any one guide me how to proceed?
    Thanks In Advance
    KK

    Hi,
    As Connection Object & Device Location are functional locations so you have to be sure to map it to the same structure as defined in PM.
    The structure can be defined in PM through this path:
    Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Technical Objects -> Functional Locations -> Create Structure Indicator for Reference Locations/Functional Locations                                                                                                    
    Here you can define your own edit mask for your structure for the functional location.
    according to the error message you got the Edit mask defined in your system must be XXXX-XXX-AA-NN.(kindly Check).
    X means you can enter both number and letters.
    A means only letters can be entered.
    N means only numbers can be entered.
    So try something like 1ABC-1A-QW-77(again check with the old number range that was defined)
    You can change the edit mask to 'XXXXXXX......XXXXXXXX'.(full field filled with X).
    and then I guess you can use the number range you have defined(as you wrote above) in the Connection Object number range(Object : ISU_EHAU)
    Kindly revert back for any clarifications.
    Regards,
    Rakesh..
    Edited by: Rakesh Dasgupta on Feb 12, 2011 2:41 PM

Maybe you are looking for

  • My import system is no longer accessible on firefox.

    I am using the apsona import tool in both my zen and open carts. After upgrading firefox, the referenced import tool is no longer accessible although I can log into zen-cart and open-cart. The toolbar is accessible in zen but when I click the button

  • Unable to see JSF pages in Design View after upgrade to Netbean 6.1

    Hi: I have a Sun Java Studio Creator Update 2 Project and I upgraded to Netbean 6.1 according to Sun's migration guide. It compiles and runs OK, but i can not see any page in design view at all. Any one has any idea? thanks

  • What to do with a broken Bluetooth keyboard?

    I have an Apple Bluetooth keyboard with non-working keys: Tab, Caps Lock, left Shift, Q, W, E, R, and T. All the others work fine, and I can successfully pair it with my PowerBook. I took it apart to investigate and confirmed what I had suspected: So

  • GroupWise Notify

    GroupWise client version 7.0.3hp1 User A logs into her GroupWise account with notify running. User A gets alarm Notification for user B. User A does not have any rights to User B's groupWise account. 1. User A does not have proxy access to User B's a

  • EQ Compressor plug in missing?

    I've been using logicprox for a few months now and all of a sudden when I open up my projects there's orange exclamation points over the channel strip and it says plug in compresser eq missing. There's no sound coming out of any of my projects. It's