Crm load to bw

Can anybody please let me explain followings-
      1. step by step procedure to load crm data from an existing crm data source(both crm and bw side)
      2. procedure to enhance an existing crm data source
Thanks
Deep

Hi,
Data from CRM to BW is divided into diiferant Data sources.
First need to find data source name.
Use the following seps
First of all, activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
It is depends if you want to use in BW some ready made (Business Content) data analysis models.If so, you need to find your data source in RSA5 in CRM and activate it. See this link http://help.sap.com/saphelp_nw2004s/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm to find Cube you want to analyze in BW, and Data Source connected to it.
BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
CRM extraction
CRM Extraction
Pls chk this link for Crm enhancement
Enhance standard data sources in CRM
BWA1 is for all standard crm datsource maintaince
rsa2 for generic datasource
BWA5 i think we use this Tcode after RSA5 activation additionally.
yes(incase of delta)
BWA7 do we have to use this tcode along with BWA1 for standard datasources also or else only for generic datasource.
irrespective of the type of dtasource,use it if you want to load delta(you need to delta enable the datasource here)
So we don't need to put the code as we traditionally do it for R/3 , if we just mapp the fields that would bring the data for these fields.
as i told in CRM we willwrite code in BADI in case you have done enhancement
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/a-c/customer%20enhancements%20and%20userexits%20in%20bw%20-%20sap%20netweaver%20%20know-how%20network%20webinar.pdf
also chk this(credit goes to the writer)
CRm enhancement:
1. Enhance Extract Structure with the required fields. (Create & include an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double click on the Datasource and remove the flags in the column 'Hide Field' for all fields of Append).
2.b) If the new fields cannot be seen in the extract structure of the transaction BWA1 then change and save the datasource, and then activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO . Follow the path ->SAP Implementation guide ->Implementation with other mySAP components ->Data transfer to the Business Information Warehouse-> Settings for the application specific datasources (CRM)->Settings for BW adapter-> Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Refer to the SAP Note 692195 for more info ......
*pls assign points,if link is useful*
Regards
CSM Reddy

Similar Messages

  • Universal Adapter- CRM load is failing

    Hi friends,
    Recently had a successful load for the following SA in my DAC
    *) Human Resources.
    *) Finance.
    *) Supply Chain Mgmt.
    *) Procurement and Spend.
    *) Projects.
    Since all the above SA are in the ORA_R1213 Adaptor. After the successful load im in the verge of performing Complete CRM load which is in the Universal Adaptor.
    What i did is i added the complete CRM Subject Area to my existing ORA_R1213 Subject Area(nearly i had 23 subject areas for CRM). And generated the parameters for the subject areas of the following container(ORA_R1213 and Universal) in my subject area like the following.
    Name:DB_Connection_OLAP-->Value: DataWarehouse-->SourceSystem: Universal
    Name:DB_Connection_OLAP-->Value: DataWarehouse-->SourceSystem: Oracle R12.1.3
    Name:DB_Connection_OLTP-->Value: ORA_R1213-->SourceSystem: Universal
    Name:DB_Connection_OLTP-->Value: ORA_R1213-->SourceSystem: Oracle R12.1.3
    Name:FlatFileConnection-->Value: ORA_R1213_Flatfile-->SourceSystem: Universal
    Name:FlatFileConnection-->Value: ORA_R1213_Flatfile-->SourceSystem: Oracle R12.1.3
    Name:PLP-->Value: PLP-->SourceSystem: Oracle R12.1.3
    Name:PLP-->Value: PLP-->SourceSystem: Universal
    Name:SDE_ORA_R1213 Adaptor-->Value: SDE_ORA_R1213 Adaptor-->SourceSystem: Oracle R12.1.3
    Name:SDE Universal Adaptor-->Value: SDE Universal  Adaptor-->SourceSystem: Universal
    Name:SILOS-->Value: SILOS-->SourceSystem: Universal
    Name:SILOS-->Value: SILOS-->SourceSystem: Oracle R12.1.3
    Name:SIL_Vert-->Value: SIL_Vert-->SourceSystem: UniversalAs i have Relational connection in informatica Workflow manager for both source and target like
    Source-->ORA_R1213
    Target-->DataWarehouse
    After generated parameters i builded it and performed a EP, in which my previous Subject Area will peform incr. load and my new CRM Subject Area will peform Full load in it. As a result i have total number of tasks like 1302, in that task only 200 is of successful task and remaining 1000 task is failing.
    When i seen the reason for the failed task, i can see the failed task is from the following universal folder
    Name:FlatFileConnection-->Value: ORA_R1213_Flatfile-->SourceSystem: Universal
    Im not sure exactly what is the problem as i couldnt find any ORA error behind this Universal Container CRM Failed task.
    Is am i missing anywhere else.
    Thanks in advance.
    Regards,
    Saro

    Hi Svee,
    I quered in my Source DB like you said as below
    select * from all_objects where object_type = 'TABLE' and object_name like 'S_%' and owner = 'APPS'
    I just found 9 tables in my apps schema for the above query which is not @ all related to the CRM module.
    As a part of the unit test i tested for one of the failed task "SDE_Universal_CodeDimension_Currency"
    i got the following error for the failed task like
    All Task Batches
         Informatica Session Batch
              INFORMATICA TASK:SDE_Universal_Adaptor:SDE_Universal_CodeDimension_Currency:(Source : FULL Target : INCREMENTAL)
              2012-11-24 21:14:11.788 INFORMATICA TASK:SDE_Universal_Adaptor:SDE_Universal_CodeDimension_Currency:(Source : FULL Target : INCREMENTAL) has started.
              ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_Universal_Adaptor:SDE_Universal_CodeDimension_Currency:(Source : FULL Target : INCREMENTAL)
              MESSAGE:::
              Irrecoverable Error
              pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Services -d Domain_biserver -u Administrator -p ****  -f SDE_Universal_Adaptor  -paramfile C:\Informatica\9.1.0\server\infa_shared\SrcFiles\\UNIV.DataWarehouse.SDE_Universal_Adaptor.SDE_Universal_CodeDimension_Currency.txt SDE_Universal_CodeDimension_Currency
              Status Desc : Failed
              WorkFlowMessage :
              =====================================
              STD OUTPUT
              =====================================
              Informatica(r) PMCMD, version [9.1.0 HotFix2], build [357.0903], Windows 64-bit
              Copyright (c) Informatica Corporation 1994 - 2011
              All Rights Reserved.
              Invoked at Sat Nov 24 21:14:49 2012
              Connected to Integration Service: [Oracle_BI_DW_Base_Integration_Services].
              Integration Service status: [Running]
              Integration Service startup time: [Sat Nov 24 19:01:11 2012]
              Integration Service current time: [Sat Nov 24 21:14:50 2012]
              Folder: [SDE_Universal_Adaptor]
              Workflow: [SDE_Universal_CodeDimension_Currency] version [1].
              Workflow run status: [Failed]
              Workflow run error code: [36331]
              Workflow run error message: [WARNING: Session task instance [SDE_Universal_CodeDimension_Currency] failed and its "fail parent if this task fails" setting is turned on.  So, Workflow [SDE_Universal_CodeDimension_Currency] will be failed.]
              Workflow run id [5893].
              Start time: [Sat Nov 24 21:14:28 2012]
              End time: [Sat Nov 24 21:14:44 2012]
              Workflow log file: [C:\Informatica\9.1.0\server\infa_shared\WorkflowLogs\SDE_Universal_CodeDimension_Currency.log]
              Workflow run type: [User request]
              Run workflow as user: [Administrator]
              Run workflow with Impersonated OSProfile in domain: []
              Integration Service: [Oracle_BI_DW_Base_Integration_Services]
              Disconnecting from Integration Service
              Completed at Sat Nov 24 21:14:50 2012
              =====================================
              ERROR OUTPUT
              =====================================
              Error Message : Unknown reason for error code 36331
              ErrorCode : 36331
              EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
              com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183)
              com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
              com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
              com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
              com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586)
              com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
              java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
              java.util.concurrent.FutureTask.run(FutureTask.java:138)
              java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
              java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
              java.util.concurrent.FutureTask.run(FutureTask.java:138)
              java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
              java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
              java.lang.Thread.run(Thread.java:619)
              (Number of retries : 1)
              pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Services -d Domain_biserver -u Administrator -p ****  -f SDE_Universal_Adaptor  -paramfile C:\Informatica\9.1.0\server\infa_shared\SrcFiles\\UNIV.DataWarehouse.SDE_Universal_Adaptor.SDE_Universal_CodeDimension_Currency.txt SDE_Universal_CodeDimension_Currency
              2012-11-24 21:15:09.913 INFORMATICA TASK:SDE_Universal_Adaptor:SDE_Universal_CodeDimension_Currency:(Source : FULL Target : INCREMENTAL) has finished execution with Failed status.
              ------------------------------What might be the issue svee.
    Regards,
    Saro

  • Can CRM Load to Two BW Systems?

    Veterans,
    Can an existing CRM Source system viably concurrently load into multiple BW (NW04s) Target productive systems?
    If it can, what precautions are needed to ensure viability of delta loads?
    I've reviewed landscape Note 775568 and it's caveats and viability proposals but it only refers to mainly ERP source systems.
    Have also reviewed CRM FAQ Note 692195.
    Need to be more certain of the CRM source system side data and associated delta ETL.
    Scenario:
    One CRM source system1
    CRM system1 has already 2 delta loads into BW1 target for the same DatasourceX.
    Same CRM system1 also needs those same delta load values to ETL into the proposed other BW2 target productive landscape for the same DatasourceX but maybe on a different day so it receives its own delta load1.
    BW1 target should also safely be able to receive delta load3 on its next delta.
    Am considering of the more complex transactional CRM datasources.
    Appreciate your help and input.
    Regards,
    Lee

    Hi Andrea,
    Thanks and appreciated for your reply.
    I know that multiple BW systems can be loaded from a single R/3 source instance with some conditions - it is in landscape Note 775568.
    But my specific question relates to CRM source systems loading into multiple BW systems. CRM is a satellite system.
    CRM data flows into ERP and BW systems via middleware so that's the reason for my posting.
    Can someone else like Dennis Scoville who has answered previous CRM BW postings maybe also contribute?
    All input and contributions are welcome and appreciated.
    Regards,
    Lee

  • Short dump in BW for CRM load

    Experts,
    This is a strange situation. After upgrade to CRM 5.0, I have noticed that if we try to create or open info package to load data from CRM opportunity to BW, gives ABAP short dump and pointing to some delta load error. So, I don't get opportunity to reinit. delta load that way. It seems like source system has some issue that gives dump before even we open info packae to load data. I have ckecked RSA7 and RSA3 in CRM and found no problem at all. Tried to restore and activate and replicate data source into BW. Activated Transfer rule and Transfer structure. Nothing helped.
    Can anybody suggest me anything please? Thanks.
    Regards,
    Nimesh

    Hi NP
    Please check the connectivity between CRM and BW systems. Go to source sytems and make sure that CRM system client is in active state or not? Go to sm59 and check with your source system is Unicode. If every thing is ok,then it is not a problem with systems. Serach for related SAP notes and apply that note with Transaction code: Snote. Hope this will help you,if yes assign some points
    Regards
    sriman

  • Step-by-Step Guide for connecting CRM with SAP R/3 system Server

    Hi Experts,
    For my ongoing project , I am in the need of connecting the CRM server with
    SD server.
    Can u share any Step- By Step  guide for doing that.
    I know that  the RFC connection has to be established between the system.
    Logical system must be create and all such stuffs.
    It is definitly helpful, If u can help me out.
    I would  to thank, appreciate and reward for your help
    Best Regards,
    Maniprabu

    Hi Mani,
    Follow the following steps :
    1. Create RFC destination for both the systems on CRM and R/3 in SM59.
    2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
    3. Create a user in the R/3 table CRMCONSUM with the name CRM.
    4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
       Create an entry for following parameter entry:
       Key - R3A_COMMON
       Para name - CRM_DEFAULT_DESTINATION
       Value - R/3 logical system
    5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
        CRMRFCPAR :
        Create new entry with following data:
        User - CRM
        Object name - *
        RFC Destination - RFC destination for CRM
        Load types - All Load Types
        In Queue flag - X
        Send XML – No XML
        CRMPAROLTP :
        Create the following parameter entry:
        Para name - CRM_DEFAULT_DESTINATION
        User - CRM
        Value -  Name of the CRM logical system
    6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
        Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
    7. Register the queues in SMQR and SMQS transactions.
    PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
    <b>Reward points if it helps.</b>

  • Queue with CRM and SRM

    Hello all,
    landscape is R/3 4.7, EBP and CRM
    Problem that I have is that EBP is receiving CRM loads from R/3.
    Users in R/3 for EBP and CRM are separate, Q prefix is different, and in inbound queue of EBP I can still see loads from R/3 which are for CRM (they are going to CRM also).
    Is there any way to distinguish receiver of R/3 adapter to receive in EBP only loads for EBP?
    TIA
    Gordan

    Hi Gordan,
      I think the problem is with the table CRMCONSUM in  both the systems...See whetehr the entry has been maintained in this table for SRM as the User/COnsumer in both the systems.
      Hope this helps.
    BR,
    Disha.
    Do reward points for helpful answers.

  • Procedure to know No of delta records

    Hi All,
    There were some changes done in CRMPRD for the DS:Business datasource.
    So we want to compare the changes is DELTA records in CRM loaded to BI server.
    Now,
    Is there any way to know the no. of delta records in the R/3 production(here CRM) for partiular dates.
    For eg: business partner delta records in CRM production.

    Hi,
    You can try in RSA3 by giving this data source, select delta upload and in the field selections tab give the dates and run it, here you can get the no.of records extracted for that data source on that day.

  • Steps to create  rfc destination

    hi,
    what are the steps to create rfc destination

    Follow the following steps :
    1. Create RFC destination for both the systems on CRM and R/3 in SM59.
    2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
    3. Create a user in the R/3 table CRMCONSUM with the name CRM.
    4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
    Create an entry for following parameter entry:
    Key - R3A_COMMON
    Para name - CRM_DEFAULT_DESTINATION
    Value - R/3 logical system
    5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
    CRMRFCPAR :
    Create new entry with following data:
    User - CRM
    Object name - *
    RFC Destination - RFC destination for CRM
    Load types - All Load Types
    In Queue flag - X
    Send XML – No XML
    CRMPAROLTP :
    Create the following parameter entry:
    Para name - CRM_DEFAULT_DESTINATION
    User - CRM
    Value - Name of the CRM logical system
    6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
    Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
    7. Register the queues in SMQR and SMQS transactions.
    PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
    Regards.

  • Segmentation Wizard - External Segments

    We are having problems with using External Segments (csv file) in Segmentation Wizard. When we use an exteral list - and run SW - the list that populates has only a few contacts or none. I am not sure why it is not pulling the complete list.
    Thank you for any suggestions.

    Interestingly there does appear to be a bug somewhere as there seems to be a consistent loss of between 20 and 40 contacts when using segmentation wizard and an external segment. My problem is that we are taking an external contact list (not already on CRM), loading the contact list so the contacts are on CRM and then using the same list as an external segment for Segmentation Wizard. Because it is an external segment we do not have the Row IDs. We have just fed it the email address but even then we consistently fail to find 20 to 40 records out of about 400. And these are not duplicates either - we have checked.

  • Initial load of sales orders from R3 to CRM without statuses

    1) Some sales orders were uploaded into CRM without statuses in the headers or line items. 
    2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no problem.
    Any ideas or suggestions?
    Thanks.

    Hi,
       Request load of adapter objects uses different extractor modules for extracting the data from external system to CRM. While your initial load of sales docs. will use a different extraction logic bases on the filter conditions specfied on trx.
    R3AC1
       There may be a problem in the extraction of data from the source system (don't know if you are using a R/3). Can you please de-register the R/3 (i suppose) outbound queue using trx.
    SMQS
    , and then debug the extraction (R/3 outbound) before the data is sent to CRM using FM
    CRS_SEND_TO_SERVER
       If this goes well, you may try debugging the mapper in CRM inbound and the validation module in CRM as a last resort. Also, please refer to trx.
    SMW01
    to see if the Bdocs are fully processed.
    Hope this helps...Reward if helpful.
    Regards,
    Sudipta.

  • Loading transaction data to CRM and SAP/R3 from legacy system

    Where can I find information about expected timing to load orders from a legacy system to CRM and SAP R/3? Does anyone know how long it would take to do the update in CRM using RFC's and BAPI's and then load to SAP/R3 if the order had an average of 3.2 line items per order and there were 50.7 million orders? It is assumed we would run multiple loads concurrently. So I guess a better question is how long does it normally take to load one order with 3.2 line items onto CRM and also SAP R/3?
    Any advise would be greatly appreciated. Thank you.

    Hi Qutubuddin,
    Can you please let me know how you achieved moving data from non sap system to r3 using webdynpro java?
    thanks
    sunil

  • Unable to load plug-in assembly for crm 2013 on site

    hi, 
    i am trying to register a plugin that i wrote to our CRM 2013 on site, i have copied my dll and the 2 ms dll's Microsoft.Crm.Sdk.Proxy.dll and Microsoft.Xrm.Sdk.dll to C:\Program Files\Microsoft Dynamics CRM\Server\bin\assembly on the CRM
    server machine.  this assembly directory has all of the permissions for my user and the same user has the Deployment Administrator role in CRM.  
    however, i am still getting an error "Unable to load plug-in assembly." when trying to register the assembly plugin in without isolation mode, on disc.  when i register to database it works fine.  but i would like to stick to the disc
    while debugging.
    what else could be causing this problem?
    thanks,
    Inna

    That is a strange one, I've never had good luck with anything other than database deployment.  You can debug the plugin DLL using database deployment.
    That being said, there is a very good tool called DevDeployment that you can use for your VS build process to publish the updated DLL after it's built.
    http://www.patrickverbeeten.com/CRM-Applications/Deployment-Helper
    Not sure if this answers the question, but if you don't get an answer you can use this tool anyway.

  • Initial down load of objects from R/3 to CRM

    Hi Experts,
    We are facing problem while we are doing initial download for the objects from R/3 to CRM. 1st 5 objects showing running(yellow) remaining all are showing waiting(red) in R3AM1.We maintained all the settings. Let me know anything we missed in this please!
    Please provide Middleware settings for down load the objects from R/3 to CRM.
    Thanks in Advance
    RAMESH

    Hi Rajesh,
    Please check for those running objects whether there are any "Parent Objects". You open that adapter object which is in "Running" state and there is a tab called "parent objects". Please check whether there are any objects present there. If there are objects present there then those needs to be run first before running the current object.
    Regarding the objects in "waiting" state the reason is because the parameter MAX_PARALLEL_PROCESSES in the table SMOFPARSFA is set to a small value I believe.Increase the value to 99 and then again try the loading of objects.
    This parameter MAX_PARALLEL_PROCESSES  indicates the total number of loads that can be done at a time.
    Thanks
    Abishek

  • Error in delta load of 'Customer Group' from R/3 to CRM

    Hi Experts,
    I added new 'Customer Groups' in R/3. But this is not being updated in CRM. Do I have to trigger initial load again through R3AS or should I create new Customer Groups in CRM?
    The BP delta load BDocs are stuck in SMW01 due to this change. Also, if I need to do the Initial load of Customer Group, which object do I need to do the load for? Is it dnl_cust_sales?
    Please help as it is a Production issue.
    -- Pat

    Hi Pat,
    Use object 'DNL_CUST_SALES' to download Customer Group from R/3 to CRM.
    Use R3AS4 transaction to execute the same.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Error when load data from CRM 3.0 to BI 7.0

    Hi
    I have connect CRM 3.0 system with BI 7.0 the CRM is MDMP and the BI is Unicode.
    When I run the BW extraction of the CRM Business Partner data I've a short dump that say GETWA_NOT_ASSIGNED
    -.You address a field symbol that pointed to the line of an internal table that was deleted.
    -.You address a field symbol that was previously reset using UNASSIGNED or that pointed to a local field that no longer exist.
    -. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
    When I check the RFC in CRM I've disable the Unicode option
    I think that it's for the unicode because I've the last support package 12 installed in BI and the rest of the process chain are running perfect.
    My hotmail mail is [email protected] if you need the screen shot.
    Regards and thanks a lot
    Jose

    Hi Again.
    When the BP data is load into BI update it in PSA but the error occur with the update rule and the load monitoring is yellow and I need change it to red to abort it.
    Can you help to me?
    Regards
    Jose

Maybe you are looking for

  • Help with Flash smooth transitions

    Can someone please tell me how I can make a Flash movie like this one here where it transitions smoothly from one image to another. I have been using Flash for a while at a basic level, but my attempts at such movies always seem to be jerky. When I c

  • Run import data in batch file

    Hi DOes anyone know how to run sqlplus and import command in a .bat file? I am trying to import about 10 database dump files into a database, what I want to do is to run sql statement to create tablespace/user in a .bat file first and then run import

  • Itunes library .itl file is locked when trying to upgrade to IOS5

    Itunes library .itl file is locked when trying to download IOS5 upgrade. Can someone help?

  • Administration of External Send process T-Code SOST

    By executing this T-code(sost) it  displaying the data  (status,send method ,Doc title,Sender,Recipient,Send Date,Send time,Msg) These fields are fetching from which table. I checked SOST TABLE .In this table i changed the field SOST-Sender data but

  • Import speeds suddenly slowed down

    I was using Lightroom 4.4 Windows 64bit this morning to import photos. I'd set off two batches of a hundered or so, one after the other and they both ran fne. I then switched to a different cataog, about 12000 files smaller, and tried to set off anot