CRM material description not replicated

Hi All.
We are facing a issue.
A new material was created in R/3 and was replicated in CRM but the material discription is not replicated in CRM when we see in commpr01.
How to solve this issue.
We are using CRM 4.0 and R/3 4.7

Hi Rajat,
Please check the procedures during replication process. Generally entire header information will be replicated when standard material is being replicated. if any routines exist, then please check those.
Thanks,
sksingh

Similar Messages

  • R/3 Material description not replicating in SRM CC-Hubwoo

    Hi experts,
    I have an issue with the material description,
    I dont have much knowlodge in EBP and im new to SRM.
    Material description in R/3 and CC-Hubwoo are not matching.
    Can any body help me regarding the issue.....
    Thanks in advance,
    Krish.

    Hi
    In SRM, use Transaction – SM30
    Go to Table - COMCHIERARCHY_
    Amend the setting so that the following is checked:
    Transfer 60 Character Description
    This will now ensure that the 60 character material group description is replicated to SRM.
    The OSS note (455949) SAP has given us long back works around CRM customizing path.
    *To access it in SRM use SM30 on COMCHIERARCHY to use long description instead of short one.*_
    Use
    In R/3 system - T023T has short description (20 char) and long description ( 60 char ).
    The description in SRM COMM_CATEGORYT has 80 char length.
    See related pointers ->
    overwriting SAP standard material description
    Material Group description in SRM
    How can i change the description of material when i create a SC?
    Hope this will help. Do let me know.
    Regards
    - Atul

  • Material Description not Showing in BOMs

    Hi ,
        Material Description not Showing in BOMs but we maintained the description in Materal Master.

    Ltawada,
    Then it must be a SAP-Program error. Look for OSS notes for this problem, shall let you know the number If I find.
    Regards,
    Prasobh

  • R/3 material number not replicated in COMM_PRODUCT and COMMPR01 in SRM

    Hi SRM experts,
    We have a problem when SRM user tries to raise order against Product A. He encountered an error "Incomplete items on Catalog, only complete Items transferred". Upon looking at COMM_PRODUCT table and COMMPR01 (product maintenance) in SRM, this Product A is not existing. What could be the reason why this product was not replicated in SRM? Among materials w/c belong to same Product Category are all exist in table except for this specific material. This, however, is existing in MARA and not flagged for deletion. I have checked the SMQ2 in SRM and no queues found.
    Need your expert advice.
    Thanks,
    Madelyn

    Hi
    In SRM, use Transaction – SM30
    Go to Table - COMCHIERARCHY_
    Amend the setting so that the following is checked:
    Transfer 60 Character Description
    This will now ensure that the 60 character material group description is replicated to SRM.
    The OSS note (455949) SAP has given us long back works around CRM customizing path.
    *To access it in SRM use SM30 on COMCHIERARCHY to use long description instead of short one.*_
    Use
    In R/3 system - T023T has short description (20 char) and long description ( 60 char ).
    The description in SRM COMM_CATEGORYT has 80 char length.
    See related pointers ->
    overwriting SAP standard material description
    Material Group description in SRM
    How can i change the description of material when i create a SC?
    Hope this will help. Do let me know.
    Regards
    - Atul

  • Direct Material Desciption not Replicated over to SRM

    Hi,
    I am using SRM Server 5.5,Classic Scenario.When we replicated materials the material Descriptions are not transferred.Can't see in Commpr01.Any clues please?
    Thanks & Regards,
    Sudhakar

    Hi sudhakar,
    i am also facing the same problem,
    For some of materials Description are not Replicated over to SRM.
    Did u find any solution..
    pleas help us.
    Regards,
    Mani
    [email protected]

  • Material Description not showing in the internal goods and services catalog

    Hello All,
    I have replicated materials from backend. They have all been successfully replicated and I can see everything in COMMPR01. But when we create a shopping cart using the internal catalog only the material number and system show up. We are on SRN server 5.5 support pack 15. Any help will be really appreciated.
    Thanks,

    Hi Donna,
    Check, if you have description in correct language.
    For example:
    If you replicate materials with English names (description only in english) and you login to the SRM using for example Italian, the description of the material will be empty.
    There is a Description table in COMMPR01 transaction on the General tab (bottom of the screen).
    Regards,
    Marcin

  • New field in CRM datasouce is not replicated into BW datasource

    Hello Everyone
    I am hoping you will be able to help me. We have created a new field on our CRM Activities datasource CRM_SALES_ACT_1. This datasouce is currently active and we are using a delta update to our BW system. We have added a new custom field to this datasource which is being populated in CRM (I have checked this using RSA7). However, when this datasouce is being replicated in BW it is not bringing across the new field into the datasouce. We replicted the datasources when the delta queue had been cleared down.
    Please can anyone suggest what else I can try, Do I have to delete the current initialisations, and then recreate them using initialisation without datatransfer?
    We are using BW3.5
    Many thanks
    Gareth

    Hi Gareth,
    I am currenlt involved BI 7.o implementation for CRM analytics (CRM 2007). I am working on a UK council project. I am first time working with CRM.
    Mainly we have to provide reports on,
    service tickets,
    Activities,
    Survey
    ERMS etc..
    Can you please provide some design documentation if you have?. Please can you also let me what all masterdata required....
    Thanks,
    Sudha

  • Material Description in Condition record for pricing

    Hi All,
    I want to have material description (not as key field but just for information) in the condtion record for pricing in VK11. What shud i do for it. Please suggest.
    Thanks

    Hi,
    While changing Condition Table , select the Material & go to technical view.There is a radio button of Text Field ,select it & then check.
    Best Regards,
    Ankur

  • Material description is missing when replicating material from R/3 to CRM

    Hi Experts,
    I am facing middleware error.
    I have replicated a material from R/3 to CRM system.
    I am able to see all the details in CRM except the material description in CRM.
    The material i have replicated from R/3 to CRM has a description in R/3 but the same description is missing in CRM and it is showing blank.
    Please help me to solve this.
    Thanks

    Hi,
      Go to the COMM_PRSHTEXT see the table entries is there are not. Pass product GUID in this table and check.
    Regards
    Srinu

  • Sales text of material is not getting replicated

    Hi Experts,
    We are working on CRM7.0 which is connected to R37.0.
    We have replicated materials successfully. Now in R3 we have modified sales text for few products. This change should have delta downloaded. But it is not happening. I have checked delta queues in R3 and CRM. All delta queues are cleared.
    Eralier, I downloaded the product through request and with this sales text did flow. But, suddenly this is not flowing even when I am downloading the product through request.
    Is there anything I am missing?
    Please help.

    Hi,
    In PR and PO...you need not put f4(not mandatory).......just put material description e.g. ring*....press enter
    also while searching by F4.....select the required tab first e.g. plant material by discription  and put discription with * for wild crad search.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Configuration is not replicated from CRM to ECC for configurable product

    Hi,
    We have some materials in the system for which the configuration is not replicated from CRM to ECC.
    We create a quotation in CRM and configure it. In CRM,  the configuration is complete and components are properly exploded but when we check the same quotation in ECC, configuration is incomplete with respect to some characteristics and product references.
    Please find below finding
    1. If the same material is created in another plant/company code, the configuration is replicated properly.
    2. We have also checked that the BOM is completely maintained for plants for which configuration is replicated. But we dont think so it could be an issue since if we create the quotation in ECC instead of creating in CRM, for the plant (for which the configuration is not replicated from CRM to ECC),  it is properly exploded and complete.
    3. variant prices are replicated properly even though components are not replicated.
    We need to know if we can explode the BOM in the configuration even though complete BOM for the particular plant is not maintained. If its not possible to explode, why it is possible for us to explode the BOM in the configuration in quotation.
    Please  advise.
    Thx.

    the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
    My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC?

  • Language specific replication of material group description not working SRM

    Hi All,
    We have backend R/3 MM system from which we replicate our materials,material groups. For Italian language the replication of the material groups description is not working. Though the description is available in backend R/3 system when i run the DNL_CUST_PROD1object in R3AS tcode, there is no replication log in SMQ2 but still the Italian language is not replicated into SRM.
    There are no logs in SMW01 tcode also.
    Please suggest.
    Best regards,
    Sam

    Hi,
    As david explained,you need to set the filter for the LANGUAGE field  in trascn R3AC3 before replicating the product categories.
    In R3AC3 select DNL_CUST_PROD1. Go to table structures tab . Click on the filter next to T023T table. This will take you to the filter tab. Select source site name and filter options. In the field put "SPRAS", in op put "EQ" and in low value the value 'IT"(for italian) . You can also describe a range here instead of individual material group numbers.
    BR,
    Disha.
    Do reward points for  useful answers.

  • Material description is not showing in VL10H

    Hi All,
    I am running the report VL10H and facing a problem, step which is being followed by me, given below:-
    1.Put plant and delivery date and execute.
    2.click on label Edit -> Show/hide delivery.
    3.Chose the field u201CMaterial descriptionu201D from Layout for output field.
    Now here I am seeing that all the materials in this report, having SD Doc i.e. delivery has been created,
    Material description is showing and remaining materials which have no delivery (showing in green color),
    Material description is not being shown.  
    Can anybody suggest me regarding this?

    Tiwari Himanshu wrote:
    Yes there is no issue regarding description maintained in the material master.
    >
    > If you run the VL10H as steps, I have given above, then you will see Material descriptions comes only those material which delivery are pending for creation, all those which delivery is posted not showing material description.
    now you are just telling it the other way around:
    Now here I am seeing that all the materials in this report, having SD Doc i.e. delivery has been created,
    Material description is showing and remaining materials which have no delivery (showing in green color),
    Material description is not being shown.
    I tested it, and all my sales order and STO order items are showing a material description.
    I do not have any items shown which have already deliveries created
    About which description are you talking, as I can see 2, one at item level and another one at header level ?

  • Some Sales Orders are not replicating into CRM

    Hi guys,
    when I check SMQ2 in CRM,  I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
    when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
    *Error in SMW01*
         Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled     CRM_ORDER
         Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3
    It's not giving much clue what's the error is...
    I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
    any help on this?
    thanks,
    Ken

    Hello Ken,
    When reprocessing a BDoc(via SMW01) you might need to set a flag.
    Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
    Thanks,
    Rohit

  • Material Description is not displaying for few records in Report

    Dear Experts,
    Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
    Cud u plz suggest a good solution for it.
    Regards,
    Sai Phani.

    Hi Phani,
    For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
    regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
    regards,
    Rk.

Maybe you are looking for