CRM MDM Integration

Hi SDNers,
We have to integrate SAP CRM (Ver 5.0 ) and SAP MDM ( MDM 5.5 SP 06). Any idea , suggestion or work around for this integration??
Thanks & Regards,
Shreya Landge.

Hello,
In case of idoc communication need to do the below
R/3 Side (CRM)
RFC Destination pointing to XI (sm59)
port (we21)
patner profile.(we20)
XI
RFC destrination type 3 pointing to sender(sm59)
port SAP+SID (idx1)
Proxy.
Define MessageType (outbound/inbound)
your case it looks like client so create outbound messagetype and generate proxy and defined the Report or FM Which sends the data to method of proxy.
Rajesh.

Similar Messages

Xi-mdm,bi-mdm,sap-mdm,crm-mdm,srm-mdm integraion ?

hi Experts can any body send me the documnets
for sap- xi -mdm integraiton
sap r/3 mdm- - bi integraions
sap mdm-crm integraion
sap mdm-srm integraion
please any body send me the screen shot and details to my main id
praveen.sapmdm @gmail.com
Edited by: g.praveen kumar on Jun 19, 2008 8:56 PM

Hello Praveen,
you can refer the threads for CRM-MDM integration as mentioned below:
Configure CRM with MDM !!!
Connecting MDM to CRM
Integration of SAP CRM with non-SAP-Systems
To integrate the SRM or CRM System with MDM, you might be need some middleware like XI/PI in between.
You can configure the MDM generic extractor to replicate the referance data (lookup table data, Transaction-MDMGX).please refer the thread as mentioned below:
Re: MDMGX Transaction in R3-XI-MDM Scenario
you can also use the standard transaction "MDM_CLNT_EXTR" to replicate the main table data fro SAP System to MDM.I am not sure that this will work for SRM or CRM System. I have used it in case of R3 System. you can refer the SAP NOTE-1035601, 836985 for this transaction.
Also can refer the threads as mentioned below on MDM_CLNT_EXTR:
Working of MDM_CLNT_EXTR transaction
MDM_CLNT_EXTR Configurations
Working of MDM_CLNT_EXTR transaction
For more on SRM-MDM integration, you can refer these link also:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0102a91-bae4-2910-f298-acbae13e80d4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6075d293-291b-2a10-7fbb-b827b28fd9b0
Hope this will help you.
TNR,
Saurabh...
Reward if found helpful.

CRM-XI-MDM Integration End To End Scenario

Hi Frnds any Body share CRM-XI-MDM Integration,
I searched in forum, But i dint find the doc....
Regards,
Raj

Hi Raj,
Please go through the links for a better understanding of the scenarios:
[Configure CRM with MDM !!!;
[Connecting MDM to CRM;
Hope it helps.
*Please reward points if helpful.
Thanks and Regards
Nitin Jain

Cisco ISE 1.2 MDM Integration Question

I have a working Cisco ISE 1.2.1 install which I've performed the integration to our MobileIron server. The "integration test" reports that the integration is good, but whenever ISE verifies MDM compliance, registration, etc.. with MobileIron when a mobile device connects it always reports that all statuses are good even if they aren't.
My test phone is out of compliance on Mobileiron because of an unapproved app, but when the phone connects ISE believes the MDM compliance status is good. I'm not sure if it isn't really checking with MDM or if the Mobileiron server is reporting erroneous results.
I also saw in a video that the phone has to be registered with MobileIron through ISE. Is this correct? I don't plan to on-board devices with MobileIron through ISE, it will be done directly through MobieIron (not connected to the Wifi network).
I only want ISE to check the compliance status of the device against MobileIron and quarantine if it isn't compliant or MDM registered.
Any help would be appreciated

Saurav and others,
Unfortunately, on-boarding sets some attribute fields on the endpoints that will then allow them to participate in a policy. It is nice that we all have MDM integration working but we almost need another class of on-boarding for corporate devices that are already in the MDM of choice (where we prefer to manage them!)
There is a little documented feature in ISE.
It appears to me that;
the on-boarding turns on the following states for the endpoint;
BYODRegistration
No ( No becomes Yes)
DeviceRegistrationStatus
NotRegistered (becomes Registered)
( The device is actually registered in MobileIron - this means did ISE register with MI. )
No MI attributes will work without this magic. TAC engineers I have dealt with don't seem to understand this feature.
This is definitely an enhancement that is needed.

R/3 u2013 XI u2013 MDM integration scenario - Standard import Maps problem

Hi Data Masters,
We are working on R/3 u2013 XI u2013 MDM integration scenario for Vendor Object. We have extracted main table Data using u201CMDM_CLNT_EXTRu201D program. Now while importing the data in MDM we want to use u201CStandard business content i.e. Standard Import Maps (Name u2013 cremdm - 03 u201D but this maps are not mapping all the fields. So do we need to extend this maps..??
OK. Second, To create own maps we are facing following problems,
1) In source section many fields are reflecting twice means in two segments i.e. LFA1 and ADRMAS like Name, City, Street, country etcu2026 whereas in Target section we have one field for the same so how to maps this fields.
2) In source, There are few fields like ADRNR which have values but in target we donot have any fields to map for the same, so how to handle thisu2026
Helpful answers will be rewarded,
Cheers
RC

closed

CRM-GATP Integration

Hello Gurus,
I'm configuring CRM-GATP integration in our server. I'm facing few challenges while doing so.
CRM team has configured customized transaction types & Item categories in CRM. These ord types & item categories do not exist in ECC system. Also the sales org being used does not exist in ECC side. Still as a part of urgent requirement, I need to configure CRM-GATP scenario for existing ord type in CRM.
I am done with basic settings in CRM like - ATP profile, RFC connections, Transaction type-item category determination, user ATP parameters etc.
When creating order, ATP check is triggered, but I'm receing an error in order: "Message no. CRM_APO 203"
Availability check/information: ATP error log (display via long text)
Message no. CRM_APO 203
Diagnosis
Errors occurred during availability check or availability information in the ATP System.
If you use an SAP APO System or an SAP R/3 System for availability check/information, the relevant system issues an error log to CRM Online. The messages of the error log are listed below with the message ID (message class) and message number. If more detailed help is available in the form of long texts, these long texts are listed right under the short texts.
System Response
The ATP System cannot report any results of the availability check/information until the errors have been fixed there.
Procedure
You can obtain the meaning of the messages from the ATP System. If you cannot fix the errors yourself, contact the responsible administrator of the ATP System.
Procedure for System Administration
Follow the recommendations of the ATP System.
Error Log ATP System: SC1CLNT001
Msg ID /SAPAPO/ATP Msg. no 059 With follow. descript:
No business system could be determined for logical system CR1CLNT200
CRM team is using the Z ord type (not in ECC) for the service part availability check in GATP. From GATP point, I have done basic settings of RBA, requirements profile etc.
Could you please help me out sorting the problem and the solution? Is it really not possible to call GATP from a stand alone CRM system?
Thansk,
AP.

Michael,
Kudos.....you are master... It solved my issue !!! Now I can ATP my product from CRM system.
Now need just a small help, I'm configuring service order scenario in CRM where I'm entering a service name (defined as a product in CRM, not in ECC/APO) and under spare parts, I need to enter my ATP relevent product. ATP will happen to the spare part item and relevent location to be appeared in order.
Till now I was only entering the spare part product in CRM just to ensure trigger to GATP and by working on above mentioned issues, GATP was triggered.
But now I'm entering service product & spare part at the same time in CRM, and ATP check is not happening, throwing some error asking for correlation profile maintainance. Please see the screenshot attached. (line item 10 is service material & 20 is Spare)
Can you please guide on how to go ahead?
Many Thanks,
AP.

Issues in retrieving the Planning profiles in CRM from BW while doing CRM-BI Integration

Dear Folks,
We are in the process of doing the SAP CRM & BI Integration wrt Trade Promotion Mangement.
For testing purposes, we tried to create a planning profile in BPS end i.e BW SEM system & trying to retrieve it from the CRM system using the below navigation.
SPRO-->CRM--> Define Transaction types--> ZBPD is the transaction type we had created.
And in Customizing Header level, in SEM Planning tab, trying to retrieve the Planning profile created in SAP SEM-BW.
Tried to search in both ways i.e prefixing the 'zprofile' with /prf/zprofile but still CRM system is not reading the same from BW system.
What ever the pre-requisites that are needed to be followed before doing all these, the same had been done in terms of creating the RFC Connections etc but still unable to retrieve the same.
And also not finding any standard content in the form of Planning areas & profiles at BW end after installing the SEM BW component add on in BW system.
Could you pls let us know what we are missing here.
Thanks in advance.

I meet the same problem, any solution?

R/3 - Xi - MDM integration Scenario.

Hi experts,
We are working on R/3 XI MDM integration scenario for Customer master wherein requirement is to consolidate the u201CGeneral datau201D but at the same time we need to retain u201Csales area datau201D for each record as it is.
For example, In sap ECC system we have Master record (Which is duplicate) as mentioned below,
Id   Name           Sales Area.
1    Neethu      SA1
2    Neethu Joy     SA2
After merging two duplicate records general data we will have a single record in data manager. Further we want to link Sales Area Data to same consolidated record. Final picture in MDM data manager should look like this,
Id   Name           Sales Area.
1   Neethu      SA1; SA2
Can anyone suggest a solution? How we can u201Cappendu201D Sales area data to Consolidated General master data. How we can deal with u201CDelta Recordsu201D to achieve the same Output..??
Matter is most urgent...Points will be rewarded.
Cheers,
Rajesh Chavan

Hi Rajesh,
On merging two duplicate records, generally data merge as a single record in data manager.So i would suggest in this case
You have to change your Repository design and MAP. you can achieve this, Firstly For Sales Area you have to make this lookup field(Multi-Valued) in main table which will lookup to SubTable say SalesA for which Multi-Valued is YES.
Now come to Import Manager, Here during Map as you have
Id Name Sales Area.
1 Neethu SA1
2 Neethu Joy SA2
Map first Source Sales Area Field with Name(DF) when you select SalesA as your Current Destination Table then import Main table records as ususal here in which you also map Sales Area source field with Sales Area which is lookup field(Multi-Valued) in main table
IN Data Manager, During Merge Records when you select Sale Area field as SA1 in Merged Record for Id 1 then Right Click on SA2 for Id 2 here your append Option will get enabled using this you can get desired output as
Id Name Sales Area.
1 Neethu SA1; SA2
Rewards if useful....
Hope it will help you,
Mandeep Saini

MDM integrity between SRM and R/3

Hi All,
How MDM integrity of the process validations being made between SRM and R/3 for the creation of different documents.
Please share me any documents regarding MDM intergirty between SRM and R/3. This is not related to Catalogs,
1. Creation of documents like GOA in SRM and distributed to R/3. How MDM will validate that data.
2 If same material available in different backend system. while creating Contract in SRM, MDM should check the R/3 materials in MDM
3. How to integrity works for Vendors.
Thanks
ravi

Hi,
Take a look in these threads:
[Re: material master replication|Re: material master replication]
[Master Data Synchronization between SRM and ERP|Master Data Synchronization between SRM and ERP]
[Re: Material replication|Re: Material replication]
Rgs,
Pedro Marques

Xi-mdm integration

Hi all,
I am new to MDM,
I heard that Xi is used to migrate the data to the MDM server where the data is stored in the XML format.
I require the basic details of how to integrate Xi with MDM for doing the Same ,and also the basic details about MDM.
Thanks,
Srinivas

Hi Srinivas,
Please go through the below links... They give you a very clear description related to MDM integration with XI. All the three links are related to each other.
/people/harrison.holland5/blog/2006/11/27/mdm-syndication : MDM Syndicator (Helpful)
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario : XI Configuration for MDM Integration.
/people/harrison.holland5/blog/2007/01/22/testing-and-monitoring-an-interface-between-mdm-xi : Testing and Monitoring an Interface between MDM and XI.
Hope this helps...
If you have any more doubts, you are welcome to get abck to me.
Regards
Kiran..

Problem in CRM - CO Integration...

Hi Experts,
Currently in ECC we did not activated Operating Concern. Our Organization don't required that. But when we are doing CO integration with CRM It is asking to assign controlling area to Operation Concern(COPA). Even though Operating concern component is not activated in ECC.
For time being i assigned the Sample Operating concern to Controlling area i.e. S001. So far i did not get any error in development. even though the curreny of this Op.Concern is EUR. Actually my Company code currency and Controlling area currenty is OMR (Omani Rial).
My question is if i tranport this to Quality & Production. Will i get any error. (My organization doesn't want any Profitability analasys Because we are using BW.)
Advice me how to go about this. Any settings are there in CRM-ECC integration to avoid assignment of Op.Concern. OR can i use Sample Op.Concern.
Tks in advance,
Abhinesh

Completed

CRM groupware integr: Mapping additional customer data

Hi,
we're running CRM groupware integration for replicating CRM contact persons to outlook private folder. This works fine in principle. However, I've got a question:
When taking a look at an outlook contact one is able to maintain several phone numbers, e.g. "Business, Business2, Private, Private2, ..." as well as several mail addresses "E-Mail, E-Mail2, E-Mail3". By default the default phone number of the business parter in CRM is replicated to phone number "Business" in outlook. Same logic for mobile and fax number. Is there a way to replicate the other numbers and mail addresses (non-default) to the outlook contact and provide them under the corresponding fields (e.g. "Business2", "E-Mail2")?
Thanks for any inputs & kind regards
Wolfgang Mayer

Hi Praveen,
do you mean
- the email addresses maintained in the standard address
or
- the default email address?
The standard address is marked as BUT020-XDFADR, the default (standard) mail address (in the standard address) is marked as ADR6-FLGDEFAULT.
Pls clarify this issue.
Thanks & regards
Wolfgang

WD ABAP CRM WebUI Integration

Hi,
I have a question regarding CRM WebUI integration with WD ABAP.
My requirement is to trigger a particular CRM application (lets say, create quotation) from EP environment for a particular portal role, may be, from a WD application.
I searched in the sdn, and whatever threads i found was describing how to launch the complete CRM UI from portal.
Any pointers on how to trigger a single CRM application from a WD application?
Regards
Seshadri

I'm not sure this is really a web dynpro abap question. Using the Portal APIs, Web Dynpro ABAP can trigger navigation to any navigation target configured in the Portal. Reading your question, I get the impression that you want to know how to setup a navigation target in the portal for a specific CRMUI application point. This seems more like a CRMUI or Portal question.

CCB-MDM Integration -- F1_SYNC_REQ_IN_REL_OBJ

Hi All,
We are configuring and installaing the CCB-MDM integration media pack 3.1.1, all the process are went successsfully other than
the Business Object schema name is required error message in the batch run tree after running the D1-SILCN batch to load the Initial Contact info in MDM environment.
After debugging the logs found that the following query has been executed by the batch process which returns the empty result since the F1_SYNC_REQ_IN_REL_OBJ table itself empty.
select
relatedobj0_.F1_SYNC_REQ_IN_ID as F1_1_, relatedobj0_.MAINT_OBJ_CD as MAINT2_1_,
relatedobj0_.REL_OBJ_TYPE_FLG as REL3_1_, relatedobj0_.F1_SYNC_REQ_IN_ID as F1_483_0_,
relatedobj0_.MAINT_OBJ_CD as MAINT2_483_0_, relatedobj0_.REL_OBJ_TYPE_FLG as REL3_483_0_,
relatedobj0_.VERSION as VERSION483_0_, relatedobj0_.PK_VALUE1 as PK5_483_0_,
relatedobj0_.PK_VALUE2 as PK6_483_0_, relatedobj0_.PK_VALUE3 as PK7_483_0_,
relatedobj0_.PK_VALUE4 as PK8_483_0_, relatedobj0_.PK_VALUE5 as PK9_483_0_
from
F1_SYNC_REQ_IN_REL_OBJ relatedobj0_ where relatedobj0_.F1_SYNC_REQ_IN_ID='83679071927425'
order by relatedobj0_.F1_SYNC_REQ_IN_ID,relatedobj0_.MAINT_OBJ_CD,relatedobj0_.REL_OBJ_TYPE_FLG;
Anybody has idea of, is the MDB or Batch or any other process will populate the records to the F1_SYNC_REQ_IN_REL_OBJ table.
Kindly help us to proceed.
Regards,
Guru

Hi Ruud,
Thank you for your prompt response, it got solved and now i m able to load the contact details to MDM env.
Regards,
Guru

Crm -isu integration , regulated scenarion

hello all ,
we are in process of crm isu integration for regulated scenario .
crm 2007 / ecc 6 isu
currently
bp and BA are getting replicated .
we are in process of replicating technical master data .
however i need to know
as we are in regulated market in india , isu guys are not creating/ using pod ,
my questions is whether we can manage without pod , and still do move in and other process from crm.
regards
hemant

hello Fritz ,
thanks for the anwer ,
i am successful to download , technical objects from isu to crm ,
however not able to do so from crm to isu .
i have following doubts
1) technical data upload thru contract or individual ?
i have done settings for individual .
2)when i go and create technical object from crm ui
i get following message in ui , however data is getting saved ,but was not getting tranfered to isu.
An error occurred during event processing in view SOToolbar.htm1 of &2 &3
An exception has occurred Exception Class CX_CRM_UI_DC_PARAM_NOT_DEFINED - Exception CX_CRM_UI_DC_PARAM_NOT_DEFINED occurred (program: CL_CRM_UI_F_CUCODATACONTE_IMPLCP, include: CL_CRM_UI_F_CUCODATACONTE_IMPLCM001, line: 15).
Method: CL_CRM_UI_F_CUCODATACONTE_IMPL=>IF_CRM_UI_DATA_CONTEXT~SET_ENTITY
Source Text Row: 15
however the data is saved ,
now when i got ib53 and check ,
the componenet details of the isu connection object is blank.
also nothing is created in backend , also no bdoc error.
seems difficult
awaiting your valuable reply

CRM MDM Integration

Similar Messages

Maybe you are looking for