CRM Middleware help for rookie needed.. Replication of Business Transaction

Hi guys,
I try to set up replication of Business Transactions from R/3 to CRM and vice versa.
I have created:
- CRM site type (CRM) , R/3 type site (R46CLNT700)
then I created a subscription: SalesDocuments (R46CLNT700 is assigned to this subscription) for publication "All Business Transactions (MESG)".
a, Is this enough configuration of MW for needed replication? Or do I need more settings set up?
b, When I try to start initial load of the Replication object BUS_TRANS_MSG (which is "in" publication All Business Transactions), I am not able to start Load from CRM to R46CLNT700)..  As target I can use only CDB...  What is wrong?
c, If I create some sales transaction in CRM system and I want it to be replicated to R/3 and vice versa, how will I know, which replication object represents this document?  For example, I create a Sales Order. How will I know, which replication object to set up for replication?
Thanx a lot!  Peter

Peter,
1.If you are looking for Initial download from CRM to R/3, this should be possible from CRM v4.0.
2. Delta flow between the systems should happen once your initial download is complete.
3. Check the Inbound and Outbound queues in CRM. If they seems to be hanging for long time, check whether you have registered the Inbound & Oubtound queues in SMQR and SMQS transaction on both CRM and R/3.
Regards,
Phani.
Wipro Technologies

Similar Messages

  • SRM 7.0 - CRM middleware settigns for material replication

    Hello SRM Guru's
    Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
    Thanks.
    Regards,
    Magesh.

    Hi,
    Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
    Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
    SDN has search functions. You can find solutions for your issue.
    Regards,
    Masa

  • How do I get tech help for export pdf during Australian business hours?

    How do I get tech help for export pdf during Australian business hours?

    You can post your issues in this forum or send your questions to DL-exportpdf_feedback.
    Jyh-Jiun Liou

  • CRM MIDDLEWARE QUERY FOR PRODUCT REPLICATION -URGENT

    Hello All,
       I am replicating the product categories(in SRM terminology) i.e. initia load of Material groups from backend(R/3) into the SRM system through the CRM Middleware.
      At the r/3 side in the tcode SMQ1(Outbound Queue),i am getting the status as STOP while at SRM side(i.e. CRM middleware) in the tcode SMQ2(Inbound queue),i get the status READY.Also when I go in for the transaction of Monitoring Initial Load (R3AM1),I get the status as RUNNING.
      Can anyone please tell me  how  much time it takes to download these objects because I had  started the Initial Load for 4 Objects out of  which the 1st object took 4 hrs to be downloaded!Please help.
    Thanks & regards,
    Disha D

    Also I got  an error in executing the report BBP_PRODUCT_SETTINGS_MW with the foll information text :-
    The termination occurred in the ABAP program "SAPLSMSG" in "MESSAGE_STOR
    The main program was "BBP_PRODUCT_SETTINGS_MW ".
    The termination occurred in line 44 of the source code of the (Include)
    program "LSMSGU02"
    of the source code of program "LSMSGU02" (when calling the editor 440).
    What customizatuon/configuration settings are required for this report to be executed succesfully????
    Disha

  • Middleware Setting for intial download - BP, Org, Products, Transactions

    Hi Team,
    Please help me out the middleware settings (adpt objects etc) we need to perform for downloading data from connected back-end system as well upload to the back-end from SAP CRM system.
    Regards,
    Alx.

    Hi Alex,
    You need to have adapter objects deifned both for upload to R/3 and download to CRM.
    For download adpaters objects, you need to mention the flow(r/3 to CRM) and the tables which is will be used to download the data to CRM.
    Similarly for upload adapter objects,you need to mention the flow(CRM to r/3) and the tables which will be used to upload the data to R/3.
    You can also define filters on these tables which will restrict the data which will flow across these systems.
    Once the adapter objects is define use R3AS to trigger the load of the object(intial load)
    Regards,
    Abishek

  • F4 help for the batch field in VL02N transaction

    We have upgraded our system from 4.6 to ecc 6.0 .In 4.6 the f4 help for the batch had " Batch selection via plant/Material/Storage location/Batch " which is not there in ECC 6.0.
    Please tell us the procedure to add in the existing  search help H_MCHA in ECC 6.0
    Thanks
    Aruna

    Hi Aruna.
      Create ur own search help using se11 tcode for required fields.
      Thanks & Regards,
    Kiran.
    Plz give rewards if and only if it is helpfull.

  • Replication of Business Transaction (CRM to R/3)

    Hi All,
    We are creating the contracts in CRM & we maintained the Int no ranges in crm & external in R/3, still contracts are not flowing to R/3,
    Can any one tel me why the contracts r not flowing to R/3, if any configuration are required pls help me.
    Thanks
    Gskumar

    Hi Kumar,
    Go to Tx SMOEAC.
    Open the details of the site R/3 and check wether 'All business transactions' is subscribed or not.
    If it is maintained check the queues(Out bound in CRM and inbound in R/3)
    If you find any thing wrong there open the respective BDOC in SMW01 and check it.
    Thanks
    Nadh.

  • IW31- How to add Search help for User specific fields in IW31 transaction.

    Hi Experts,
    I have to add Search help for standard fields USR00 to USR10 fields in IW31 transaction.
    Is there any user exit for this requirement.
    Please reply, it will be very helpful for me.
    Regards,
    B. V. Rao

    Bala,
    See the following user-exits:
    IWO10015: F4 Help for user fields on operation
    IWO10016: Customer enhancement to check operation user fields
    PeteA
    [www.pjas.com]

  • F4 help for PO date field in VA01 transaction during upgrade

    Hi All,
    We are working on upgrade project 4.6c to ECC 6.
    We came across one scenario.
    F4 help for PO date field is not coming in newer version in VA01 transaction but i checked in older version it is coming F4 help for PO date(calender).
    May i know the reason regarding this.
    Any clues
    Regards
    Jai
    Edited by: Jayanth16 on Nov 12, 2009 6:14 PM
    Edited by: Jayanth16 on Nov 12, 2009 6:22 PM

    Hi,
    User did some changes in include LSDSDF05 due to that F4 help is not coming.
    So i correct that one.
    Regards
    Jai

  • Help for beginner: Need labview signal to power on =2 actuators of 8 with one power supply

    I am a beginner in using labview. I need to use labview signal to turn on >=2 ac 8 actuators with one power supply. The 24VDC, 0-3A power supply is enough to drive all 8 actuators which need 24VDC and 0.1A current. So the main function is like turning on 2 or more than 2 switches in series with the 8 actuators with one power supply. Any suggestion of some simple module for this purpose? Thanks.

    Maybe I didn't say the question clear. I have one power supply (24VDC, 0-3A) and 8 solenoid valves (24VDC and 0.1A). Two valves (or more than two in future) have to be activated each time. I would like to find something that can work like switches installed in series with the valves. Then I can wire the valves (with the switches) in parallel with the power supply. As I turn the switches on and off with signals from Labview board, power to that specific valve will be turned on and off.
    Any advice for this kind of switches or any module that can be controlled by Labview signal? Please help! Thanks.

  • Need help for the infotype 15 in PA30 transaction

    Hi,
    My requirement is :
    In infotype 0015 when ever i change the amount i need old amount and new amount respectively.
    I am getting new amount by using below logic.
      "-- Get changed record
            CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
              EXPORTING
                PRELP = INNNN
              IMPORTING
                PNNNN = I0015.
    anybody can tell me how to get old amount.
    Thanks,
    Maheedhar

    Hi, Tadakamadla 
    You can do the following way i think.
    For Example
    date = begda -1 . " Begda of Current Record
    now select following way.
    Select single * from pa0015
    where pernr = pernr
      and endda = date.
    Hope will help you..
    Please Reply if any Issue,
    Regards,
    Faisal

  • SQL Help for FMS needed

    Hi
    Can somebody please tell me what's wrong with this:
    declare @result as varchar(30)
    if $[$OWTR.Filler] = 'NFE-1'
    begin
      set @result = (select t1.wareHouse from WOR1 t1 inner join OWOR t2 on t1.DocEntry=t2.DocEntry
    where t2.DocNum=$[OWTR.U_SIA_ProdAusg] and t1.VisOrder=$[$23.0.1]-1 AND t1.IssueType='M')
    end
    else
    set @result = 'NFE-1'
    select @result
    Thanks
    Franz

    That was not it.
    I found it ... sometimes it seems to help to ask for help ...
    set @temp = $[$OWTR.Filler]
    changed to
    set @temp = $[OWTR.Filler]
    Thanks anyway
    Franz

  • Help for Submit in conjucture with paaremeterised Transaction

    Hio All.
    Please help me with the following scenario!
    1.We have a parameterised Transaction (ZPPP03)of sm31 to open a view ZPPP.
      so when i run the Transaction i see all the entries pertaining to different sales organisation.
    2. Now we need to filter data absed on sales organisation. So that is user enters ITA only those need to be displayed via the Paremeterised Transdaction(ZPPP03)
    3. I have made a report(ZREPORT) that calls my Transaction ZPPP03.
    4. I have mde another report wherein im calling ZREPORT using sumit stamanet and passing the paarmeter that is sales organisation.
    PARAMETERS:P_ORG TYPE ZPPP003-VKORG.
    report = 'ZREPORT'.
    clear seltab.
    seltab-selname = 'D0100_FIELD_TAB-LOWER_LIMIT'.
    seltab-kind    =  'P'.
    seltab-sign    = 'I'.
    seltab-option  = 'EQ'.
    seltab-low     = P_ORG.
    append seltab.
    SUBMIT (report) WITH SELECTION-TABLE seltab.
    But when i run this this does not seem to be using the valu i asked?
    What should i do?
    Please let me know lucidly!

    Hi,
    Make use of FM 'VIEW_MAINTENANCE_CALL' to see if it suffices your requirment.
    See my sample code.
    PARAMETERS: y_p_lgnm TYPE lgnum.
    DATA : y_v_string   TYPE string.
    CONSTANTS: y_k_u        TYPE char1   VALUE 'U',
               y_k_x        TYPE char1   VALUE 'X',
               y_k_lgnum    TYPE char7   VALUE 'LGNUM',
               y_k_lgtyp    TYPE char5   VALUE 'LGTYP',
               y_k_eq       TYPE char2   VALUE 'EQ',
               y_k_viewname TYPE tabname VALUE 'YLOMANAGTROL'.
    *                   INTERNAL TABLE DECLARATION.
    DATA: y_i_seltab TYPE STANDARD TABLE OF vimsellist.
    *                   WORKAREA DECLARATION.
    DATA: y_wa_seltab TYPE vimsellist.
    START-OF-SELECTION.
    *authority check for warehouse number
      AUTHORITY-CHECK OBJECT 'L_LGNUM'
                  ID y_k_lgnum FIELD y_p_lgnm
                  ID y_k_lgtyp FIELD '*'.
      IF sy-subrc NE 0.
    * user not authorised
        CONCATENATE y_p_lgnm text-003 INTO y_v_string SEPARATED BY space.
        MESSAGE s015(ylo1) WITH text-001
                                sy-uname
                                text-002
                                y_v_string.
      ELSE.
    *Clear Internal Table
        CLEAR y_i_seltab.
        CLEAR y_wa_seltab.
    *passing the selection parameters to the function module
    *view_maintenance_call.
        y_wa_seltab-viewfield = y_k_lgnum.
        y_wa_seltab-value     = y_p_lgnm.
        y_wa_seltab-operator  = y_k_eq.
        APPEND y_wa_seltab TO y_i_seltab.
        CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
          EXPORTING
            action               = y_k_u
            view_name            = y_k_viewname
            show_selection_popup = y_k_x
          TABLES
            dba_sellist          = y_i_seltab.
      ENDIF.
    Regards,
    Ankur Parab

  • Nobody Help for customer service .... !!

    我買了iPAD 2 但耳機被卡在內斷了,唔幫我整,又話要收錢....被蘋果欺騙了!!
    I've bought an "iPad 2" in a month & my ear phone plug just crashed in the jack socket ... NO one can help for fix & need for payment .....
    <Edited by Host>

    But They say that is are human's user problem , it's not under warranty ..... & if i need to fix that problem , I need to PAY $2400- for change a new one ..... haha , My ipad 2 just bought one mouth & only $3888- ....
    That's is are joking ..... ??  

  • Providing F4 help for a field

    Dear All,
    We have a requirement like providing f4 help for the field Purchase Requisitioner (appears in Items tab of ME51N). I know that we can extend the existing search help by using search help exits but not sure whether will i be able to <b>create a new search help for a field in Std SAP Transaction.</b>
    Any inputs on how to do this will be appreciated...
    Thank you all in advance,
    Regards,
    Lakshmi

    You can add the INPUT help in an user exit provided.

Maybe you are looking for