CRM Middleware R&R Queues CCMS

Hello,
In my solman, ALAERTDB (table used by CCMS alert) keeps feeling (11 alarms each 5 minutes),
with MTMCNAME=CRM Middleware R&R Queues.
How can I know the source of these alerts?
Thanks in advance for your answers.

Hi Madhu,
Contract Account on ISU is Business Agreement on CRM. Please refer the following path to get the load guide for contract account.
The SAP Service Marketplace, http://service.sap.com/utilities => Product Information => mySAP CRM for Utilities => Cookbooks & Guidelines => IS-U Specific Set-Up and Load Guide for Business Agreement / Contract Account.
<b>Reward points if it helps.</b>

Similar Messages

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

Regarding CRM middleware and XI

In SAP CRM middleware acts as a heart of CRM.
that means communications with CRM server from any other server is through middleware,right?
In netweaver ,XI acts also the same like the integration server.
right?(both SAP and NON SAP server)
please explain the above two statements clearly.
thanks in advance
kpsmoorthy.

The role of CRM "middleware" vs XI is often misunderstood.
Let's go back many many years and understand why we have CRM "middleware".
Before XI even existed SAP had to have a way to transfer data between an R/3 system and the CRM system. The CRM system needed to have a "replica" of the necessary master data to capture sales orders for e-commerce or mobile sales. Thus SAP created the "middleware". The middleware consist of a new dimension "plugin" on the R/3 system and code on the CRM system, built upon the concept of queued RFC. Basically the standard transactions such as XK01, XD01, VA01, etc. were modified to generate bdoc's whenever data was changed or created. These changes then flowed to CRM via queued RFC.
CRM middleware primary goal was to receive data from R/3 and to send data back to ERP. In release 3.0/3.1 it was expanded to allow external systems to receive and transfer data into CRM via the XIF adapter. After the XIF adapter was released, SAP introduced the XI system. The XI system was designed for integration between systems. However the CRM middleware being robust and not requiring extra systems still exists. If you want to integrate one SAP CRM system with an SAP ERP system then the "crm middleware" is the application tool that is isued.
If you need to integrate SAP CRM with external systems then you would use a combination of XI + the CRM XIF adapter. In CRM 52/60 you can use the web services toolset in addition to the XIF adapter.
To summarize:
"CRM Middleware" - Specialized integration scenario between SAP CRM & SAP ERP
XI - your integration server that can do a lot more than "crm middleware".
Take care,
Stephen

SAP CRM Middleware flow from R/3 to CRM

hi
I am new to CRM middleware I have some doubt about the replication from the R/3 to CRM.
I have some 4 basic questions Kindly help me out
1.in initial down lode how to know which object for which requirement? There is any list like these objects for this one?
2.when the initial download have to use and when the delta down lode have to use?
3.object creating is preferable option or not if yes in which condition we have to create the objects?
4.what is the difference between customizing objects and business objects? and when we have to use which object ?
wiht Regards,
prakesh..!

Hi Prakesh
Happy to hear that my answers were useful. Hope this new will solve your problem.
So let's reply to your new questions.
1) Yes it is the delta download. This means that you have already triggered the initial download. Now all changes or new creations are replicated into the CRM system. I do not suggest this approach. This is usually used when you have no other chance because this process is complex and very time consuming. I would suggest checking the BDoc before proceding with degugging the queue. Go to transaction code SMW01. Filter on time (when you made the change). You will find bdocwith a red or yellow traffic light. This means that data have been not processed in CRM system. You usually have an error message (just select the BDoc from the list and click the red button in the toolbar) attached to the BDoc that is explainatory of the error. Correct the error and reprocess the BDoc (there is a proper button).
2) To debug the queue go to transaction code SMQS and SMQR and deregistrate inbound and outbound queue in the CRM system. After you do this, apply the changes to the customer. You will find an inbound queue in transaction code SMQ2. Select the queue and click the last button in the header toolbar. You will process the flow in debug. Remember to register the queue when this is no more necessary otherwise you will have a mess in the system.
3) if you create new customer in CRM system, this are automatically replicated in the backend system basing on the scenario set. No additional tables are created. All the changes applied in the CRM system will be replicated in the backend with the same process except the Bdoc that are really CRM specific.
Hope this help you.
Regards,
Fabrizio

USE OF CRM MIDDLEWARE AND XI in SRM LANDSCAPE

Hello All,
Please Can anyone tell me for communicating between SRM and different systems within a landscape,how do we recognise whether to opt for XI or CRM middleware
(Of SRM)???
Please Help.
Thanks,
Disha.

Hy Disha,
The different communication methods from SRM are:
1 CRM Middleware
This is only used for Master Data replication (init) with SAP Backends, and for Product master for init and delta uploads.
You can define your own BDocs for your needs (non easy way)
2 RFC
This is used for R/3 backend document creation (Reservation, PR and PO) in classic and extended scenarios, and for several checks in the SC creation
3 ALE/IDOCs
This is used for Good receipt and Invoice creation in R/3 in Classic and Extended scenario
4 XI
It is used for SUS integration, CCM upload and publishing scenarios, and PO send scenarios.
Regards.
Vadim

CRM MIDDLEWARE QUERY FOR PRODUCT REPLICATION -URGENT

Hello All,
I am replicating the product categories(in SRM terminology) i.e. initia load of Material groups from backend(R/3) into the SRM system through the CRM Middleware.
At the r/3 side in the tcode SMQ1(Outbound Queue),i am getting the status as STOP while at SRM side(i.e. CRM middleware) in the tcode SMQ2(Inbound queue),i get the status READY.Also when I go in for the transaction of Monitoring Initial Load (R3AM1),I get the status as RUNNING.
Can anyone please tell me how much time it takes to download these objects because I had started the Initial Load for 4 Objects out of which the 1st object took 4 hrs to be downloaded!Please help.
Thanks & regards,
Disha D

Also I got an error in executing the report BBP_PRODUCT_SETTINGS_MW with the foll information text :-
The termination occurred in the ABAP program "SAPLSMSG" in "MESSAGE_STOR
The main program was "BBP_PRODUCT_SETTINGS_MW ".
The termination occurred in line 44 of the source code of the (Include)
program "LSMSGU02"
of the source code of program "LSMSGU02" (when calling the editor 440).
What customizatuon/configuration settings are required for this report to be executed succesfully????
Disha

Why SAP SRM material replication happens through CRM middleware?

Can some one help me to understand, Why SAP SRM material replication happens through CRM middleware? Is there any functional/Technical reason behind this design?

Dear Sridhar,
SRM releases later SRM 4.0 are working with the same middleware implementation,
there where no changes between the releases. The SRM middleware implementation
was decoupled from the CRM middleware development at that time.
(Middleware is based on the basis functionality of queued Remote Function Calls qRFC)
Regards
Laszlo

Using SAP PI instead of CRM Middleware

Hi experts,
Is it recommend to use SAP PI instead of SAP CRM Middleware.
If yes how can I do that.
I have read in forum requests that it can be implemented by using iDOC instead of BDocs.
I need a technical guideline how data (eg. Business Partner Data) can be tranferred from CRM to other ERP System.
Thank you for help.
Greetings
Mario
Edited by: Mario Bauer on Jun 22, 2010 9:24 AM
Edited by: Mario Bauer on Jun 22, 2010 9:28 AM

Hi!
SAP PI itself is a middleware Product but very roboust and capable enough to integrate any system to any other system, either it is SAP or Non-SAP. And there are two ways to integrate other ERP System to SAP CRM using SAP PI.
1. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message using the Middleware XIF adaptor and convert the incoming XML Messages in the BDocs and the BDocs upload the data in the SAP-CRM Data base.
2. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message and using the Functional Module convert the data into the BDocs and the BDocs upload the data in the SAPCRM Data base. In thsi situation, you need an expert ABAP Consultant to write the accurate functional Module.
The data inside the SAP_CRM System always transported in the BDocs not in Idocs. It is the BDocs data containers which transport the data from CRM Middleware to CRM Database and CRM Database upto CRM Middleware.

Version Compatibility of SAP R/3 4.6 C with SAP CRM 5.2 + CRM middleware

Dear SDN team,
We are trying to Integrate SAP R/3 4.6c with SAP CRM 5.2 using CRM middleware.
We wanted to know the following :
1.Technical and Functional feasibility in integration of CRM 5.2 and R/3 4.6c. What are problems for these versions ? ( In Brief )
2.We are trying to move the Objects BP , Quotes and Products from R/3 to CRM 5.2. Has anyone done this and can someone give us a brief description of the problems while doing the same
3.Any other useful suggestions would be very helpful regarding CRM middleware.
Kindly reply on this post . Points would be awarded.
Thanks and Regards
Dinesh and Ritvij
Email : [email protected]

Hello Ritvij,
Regarding middleware ,are you down loading plants? bacause down load object objects DNL_PLANT is obsolete.
Unusable middleware objects :
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
and the master data objects
MATERIAL
SERVICE_MASTER..
Find composite note for middleware at 872533..
What is the leading system for Order creation?
Please refer notes 490932 for more info about transactional doc replication between the two systems.
Please assign points.
regards,
Muralidhar Prasad Chatna

SMOEAC - CRM Middleware

Hi guys,
I configured the CRM middleware component to replicate materials,services and config objects but in the SMOEAC trx, on site selection, there only appears the CRM site, but not the R/3 backend site.
Table SMOF_ERPSH shows the following:
RFC DEST    ERP RELEASE ERPLOGSYS SITETYPEID
none              --                       -                       CDB
SRP             700                    SRP                  CRM
SRP is the Destination RFC defined in SAP R/3 and also the logical system ID of our SRM 5.0 System
What went wrong? How to resolve it?
Thanks for any help.
Aart

Hi Consultoresvision,
Can you pl. tell me what configuration you need to maintain for CRM middleware components.
After client copy for SRM 4.0 from Production to QA, the SMOEAC is totally erased and there is no objects. I am aware of how to create sites for R/3 and SRM after the object of "Site" is available. But here the object "Site" itself is missing.
Any inputs would be appreciated.
Thanks
Venkatesh

Is CRM Middleware Expertise Required if no R/3 Is In Scope?

Hello CRM Community,
I'm an XI developer, and I'm trying to get a handle on exactly when CRM Middleware (& thus a Middleware Resource) is required, and when it is not.
If a customer is implementing CRM 5.0 (with IC Web)in a landscape with non-SAP applications, would they necessarily require a Middleware consultant?
And if so, to what extent would that requirement be reduced in comparison to an implementation which interfaces to R/3?
Thanks in advance,
Jimmy

Hi,
CRM middleware is used in CRM whether or not the system is linked to other systems (SAP or non-SAP). CRM is based on it. Eg. whenever you create or change an object in CRM, a bdoc is created which contains the data.
The question is whether you'll need to use, influence or change the middleware in your project:
Image having integration with R/3: then you'll need the middleware for setting up the distribution (initial/delta load) between CRM & R/3. But as long as you stick to the standard solution, this will be very easy to setup.
Imagine having integration to other systems: then you'll need the middleware to interface to them (which can be done using idocs or XML).
Imagine having a CRM-MSA implementation: then the middleware is used to send data to the MSA client. This means setting up the data-distribution to the clients, which can be quite complicated.
Imagine having a stand-alone CRM system with an IC webclient and flows limited to the CRM system: then a middleware consultant won't have to much work.
Michael.

How can I send an update to CRM Middleware after changing BUPA longtext

Hi folks,
I am looking for the easiest way to send an update/insert of BP longtext change to SAP CRM Middleware (& MobileSales). I have implemented save of the text with function save_text within of a CRM application for changing bp data.
Text is available to standard CRM transaction bp, but now updates have been send to subscribed Mobile Sales clients.
I have already checked the bapi_bupa* functions, but it seems that they contain no notes/longtext segment.
Thanks for any help.
Daniel

Hi Daniel,
just wondering if you had a solution for this as I have the same issue to solve as well.
thanks, regards.

Notes on CRM Middleware and other

I am after some notes on CRM. Please can someone kindly send me the notes on CRM Middleware (CRM500) and CRM Services (CRM700) and any other similar notes.
My email is [email protected]
Thanks in advance,
Ruong

Hi Amit,
I appreciate if you could send me CRM middleware document to me as well @ [email protected]
thanks,
Amit

CRM Middleware Documentation and Training

Apologies as this is not a technical/functional question as such but I have been looking for SAP CRM Middleware documentation and/or training courses on the subject.
Particularly in relation to integration with Microsoft Exchange Server
So far I have found documentation on help.sap.com but little else. Nothing on integration with MS Exchange.
Firstly, does anyone know of any other good sources where this type of information can be found?
Secondly regarding training, the only course I have found has been the CRM Basics 5 day course that covers Middleware, but I don't know how in depth or even if it covers integration with Exchange.
Is anyone aware of any good CRM Middleware courses, preferably in the UK?
I would be grateful for any kind of help?
Many Thanks
David

Hi,
Check out
http://help.sap.com/saphelp_crm50/helpdata/en/2b/0bc5de1814b34b8f453fa5b07b8739/frameset.htm
Middleware courses are available:
CRM500(overview) & CR550(enhancements) & some mobile integration courses, but none of them realy cover groupware integration.
It's a pretty new functionality...
Michael.

CRM to R3 partner flow via CRM Middleware ...

Hi all ,
Any one can tell me where the setting of the filter in standard has been done for the fields of the BUT000 which flows to ECC R3 in the middleware .
Actually the requirement is to send some specific data of all the ship_tos which is created in CRM .
It would be even greate if any one can share the document of CRM Middleware which will give from the basic of the Middleware configuration ,Adapter objects ,attribute settings .
Thanks ,
Kashim Raja

Hi Kashim,
You can maintain the filter settings for business partners in TCode "R3AC1". Please select the Business object "BUPA_MAIN", click on filter and maintain the required filters under "Table structure within object" for BUT000 table.
Please refer this help portal for more info :
http://help.sap.com/saphelp_crm70/helpdata/EN/56/6b34429cb0907ce10000000a114b1d/frameset.htm
http://help.sap.com/saphelp_crm70/helpdata/EN/1d/09d1e713d711d6999e00508b6b8a93/frameset.htm
Regards,
Chethan
Edited by: Chethan Kumar C M on Sep 27, 2009 7:46 AM

CRM Middleware R&R Queues CCMS

Similar Messages

Maybe you are looking for