CRM Middlware Outbound Scenario

Hi Experts,
I am developing a CRM Middleware outbound scenario to replicate a Z-table from CRM ro R/3.
I have created a BDoc type for that. Could anybody list down what all steps I have to follow in CRM and R/3 side.
Help will be appreciated.
Thanks,
Naren

Narendra
Did you resolve this? I have a similar requirement but am not getting any BDocs created. I have performed the following so far:
1. Created the Z customer table in both systems.
2. Created a new messaging BDoc in CRM and linked it to the R/3 Site Type.
3. Created a new mapping function module in CRM that takes the data from the BDoc and maps it to the BAPIMTCS structure.
4. Created a new Adapter Object that links to my BDoc, contains the new customer table as the source table in CRM and contains the mapping Module.
5. Created a new Replication Object based on my new BDoc.
6. Created a new Publication and assigned it to the Replication Object.
7. Created a new Subscription and assigned to the Publication and Replication Object. Also assigned it to my R/3 site.
On the R/3 side we have created a mapping module to map the data from the BAPI structure into the equivalent R/3 table. We also have an entry in table CRMSUBTAB.
To me it looks as though the Delta update to the Z table is not triggering the CRM Outbound Processing. I am not sure if I need another FM that picks up the delta changes. If so where do we then pass this information to invoke the above process?
Regards
Ian

Similar Messages

Error in Outbound scenario : AE_DETAILS_GET_ERROR

Hello Experts,
Need your help urgently
right now i am doing outbound scenario, in that R/3 -> XI -> Oracle.
Here when i trigger 1 outbound IDOC then it is working fine... but when i try to send 100s of idocs at a time then half of them i getting through and half of them are going into error saying
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When i try to restart them into the SXMB_MONI at that time they are getting through.
I am not able to trace that y it is happening like this....
Some of them are going into the "System Error - Manual Restart Possible" and some of them are going in to the "System Error - Restart Not Possible".
Can anybody please help me out in this problem? I am not able to understand that y it is happening.
Regards,
Hetal

Hi Hetal,
Check ur adapterframework service username,password in the exchange profile are given correctly.
Also check in the Business system of the XI server, please verify the URL in the pipeline.It should be:
http://<servername>:<HTTP Port>/sap/xi/engine?type=entry.
Regards,
Prasanthi.

Testing Outbound Scenario with File Adapter

Testing an Outbound Scenario, This uses File Adapter. I checked Payloads in the Transaction SXMB_MONI in R/3 as well as XI. There was no message for error. So I suppose to get the data downloaded to a directory. The output file is a text file. The file is not getting downloaded. Can any one please help me out to solve this issue? Please let me know if you need any more information.
Transport protocol: FTP.
Message Protocol: File Content Conversion
Adapter Engine: IS
Thanks,
Rajan.SA

Chcek whether your Receiver Adapter is activated properly.
http://<host>:5<sysnumber>00/mdt/amtServlet XI > SP09
http://<host>:5<sysnumber>00/AdapterFramework <= SP09
If everything is correct, check the message in the Adapter Engine
http://<host>:5<sysnumber>00/MessagingSystem for the receiving message. You will find more information here why the message is failed to deliver to the endpoint.
regards
SKM

Why IDoc Sender Channel Used in Outbound Scenario's

Hi Team,
In my outbound scenario's ,I never used IDoc sender channel.Only ALE settings I have configured..PartnerProfile,RFC dest,Port etc.
Why can we use Idoc Sender channel? Is it only used for IDocFlat file format OR for normal Idoc's also? If we use Idoc sender Channel , how it is processing - Is it TRFC queues-sm58 ?
Can you give me clear idea on it / suggect any blogs.
Thanks.
Drumi

HI,
In my outbound scenario's ,I never used IDoc sender channel.Only ALE settings I have configured..PartnerProfile,RFC dest,Port etc.
Why can we use Idoc Sender channel? Is it only used for IDocFlat file format OR for normal Idoc's also? If we use Idoc sender Channel , how it is processing - Is it TRFC queues-sm58 ?
we dont necessary to create Sender Communication channel for IDOC and Proxy and http because xi and sender systems(out bound) resides on abap stack and also dont need for any idoc.
The reason is that R/3 can directly send Idocs to XI via ALE layer using RFC destination specified in SM59.
This IDoc after reaching XI is converted in IDoc-XML. This is done when we specify IDoc metadata IDX2 in XI. It is then used in IR for mapping.
Now for the receiver side, when IDoc-XML is created after mapping program run is sent to R/3. Before that, it has to
be converted into IDoc. This conversion is IDoc-XML to IDoc is done by IDoc Receiver adapter.
one case we need to create sender IDoc Communication channel for IDOC packaging concept thats all.
thanks,
Edited by: bhavanisankar.solasu on Dec 16, 2011 7:12 AM

Role of clients in CRM Multiple Backend Scenario

Does the CRM Multiple Backend Scenario only apply to a single client pointed to multiple CRM or ERP systems.
All the relevant tables are client dependent in CRM 2007 and the client independent ones use logical destinations which can easily be pointed todifferent clients.
We want to point different clients on a CRM or ERP system to multiple back ends, but each client will only have a single client that it points to.
For example
CRM (dev) client 100 is connected to ERP (sandbox) client 100
CRM (dev) client 200 is connected to ERP (dev) client 100
CRM (test) client 100 is connected to ERP (qa) client 100
CRM (qa) client 100 is connected to ERP (qa) client 200
This will only be in the development and qa systems. Production will be a single system and client on each side.
Regards,
Aubrey Smith

Aubrey,
Development will happen in only one client system. This can later be moved to Quality and further to production. All customization will also be moved same way. It may also happen that your development is cross client so if you do development on 100 , it will be available on 200 client as well.
Regards,
Harshit

External product configurator within a CRM-ERP LORD2 scenario?

Is it possible to use an external product configurator within a CRM-ERP LORD2 scenario?
My customer has a running webshop with an own configuration UI (java based) which is connected through badis with the ECC.
And now we implemented in SAP CRM the ERP Quotation.
Instead of rebuilding the varionatfunctions ord attributes seting the customer thinks about to intgrate the existing "konfigurator" of his web shop.
Is there anyone who knows the interface
Basic Functions -> Product Configuration -> Settings for External Configurators.
more detailed.
Where can I find an Interface declaration?
Is the planned approached in general a valid way (from your point of view).
thanks,
Dirk

Hi Stuart,
You have to notice that in order to user R/3 BOM in CRM,
you have to download object BOM (tcode R3AC1).
But downloading object BOM into CRM only possible if
your R/3 is Retail scenario (unfortunetly mine is not).
Next thing I am going to test is, create Knowledge Base
in R/3 (choosing the type = BOM). after that in CRM
download using standard configurable object SCE.
If this successfull, we can see the configurable in
the Material Master CRM.
I am going to try this in couple days, please try it
first and let me know the result.
Hope this give you some information.
Cheers,
Gun.

Interchange Acknowledgment TA1 In Different Outbound Scenarios!

Outbound Scenario:
The scenario I have here is Remote Trading Partner(TP1) doesn't need TA1's either at successful or at failure scenarios. And TP2 need TA1's both in success and failure scenarios. How to achieve the scenario with single document definition(ex: 834) created under single version(5010X220A1)?
I have a Host Trading Partner and Multiple Remote Trading Partners configured. I have one Document Definition created for both the trading partners. While defining the version we have to mention the Interchange Acknowledgment Requested under Interchange tab as either 0 or 1 based on the requirement and TA1 as Always or OnError. As we mention TA1 requirement while configuring document definition itself how to achieve when the trading partners have different requirement.
If each Trading Partner has different Vendors then there is no issue as I will create different version and will update the Interchange tab accordingly as per the requirement. So the issue is if all the Trading Partners require same version, how to achieve ???
Hope I am making sense, please correct me if wrong...
Thanks

It is supported out of the box. Please follow below steps -
1. Select the remote TP profile and navigate to the "Documents" tab
2. Select your doc def and check the box against "Override Version Param"
3. Now in TA1 drop-down select the desired value
4. Delete the corresponding agreement and recreate it again
5. Deploy it and run a test again
By this way, you may have different value for TA1 flag for different TP's in spite of using same doc def.
Regards,
Anuj

AIF Value mapping for outbound scenario

Hello All,
Is there any possibility of using same value mapping which is defined for Inbound scenario can be reused for outbound scenario as well ?
Since, AIF value mapping can be defined based on Sending system but there is no option of creating value mapping pair between sending system and receiving system (similar to SAP PI value mapping) , is it only defined to use for Inbound scenarios ?
Thanks & Regards,
Dijesh Tanna

Michael
-->>>>you cannot have the same target value for two source values ?
What does this mean? Can't we have If name = A1, then value in the target should be Sales consultant
and if name = A2 then value in the target should be sales consultant?
My question was :
If name = A1, then value in the target should be sales consultant
If surname = A1, then value in the target should be purchase consultant
In the same graphical message mapping, can this be achieved using value mapping?
Thanks

SAP CRM Multiple Backend Scenario with Solution Manager

Dear Experts,
We are implementing CRM Middleware - Multiple Backend Scenario (MEP / MBE Concept) in our client landscape for SAP CRM on HANA (Ehp3)
set-up.
And If any one of you have already implemented MEP Scenario in the SAP CRM Landscape, Could you please help us to provide with the Configuration Steps / Documents, so that we can proceed further.
Below are the following Queries:
For Customizing Adapter Object:
1) Does MEP Concept support the Customizing Adapter object to download from more than one ECC System to single CRM System.
    If Yes, Could you please provide the Configuration steps or Procedure to download the customizing data.
For Master Adapter Object:
2) The Adapter objects for Master Data like Customer and Materials are technically supported under MEP for the data exchange.
     However, is it possible to download the Equipments Master Data from more than one ECC System to single CRM System?
     If Yes, Could you please provide the steps or Procedure to download the Equipments Master Data.
And please provide if you have done the Solution Manager Configuration mapping for MEP Scenario, which is required for the maintenance and transfer of customizing mappings to CRM and Mapbox.
Thanks,
Mohanram.

Hi Alagammai,
    We are also implementing CRM Middleware - Multiple Backend Scenario (MEP / MBE Concept) in our client landscape for SAP CRM on HANA (Ehp3) set-up.
Required some Information on the below Query.
For Customizing Adapter Object:
1) Does MEP Concept support the Customizing Adapter object to download from more than one ECC System to single CRM System.
    If Yes, Could you please provide the Configuration steps or Procedure to download the customizing data.
For Master Adapter Object:
2) The Adapter objects for Master Data like Customer and Materials are technically supported under MEP for the data exchange.
     However, is it possible to download the Equipments Master Data from more than one ECC System to single CRM System?
     If Yes, Could you please provide the steps or Procedure to download the Equipments Master Data.
And please provide if you have done the Solution Manager Configuration mapping for MEP Scenario, which is required for the maintenance and transfer of customizing mappings to CRM and Mapbox.
Thanks,
Mohanram.
7829055537

XI FILE(FTP) - XI- CRM(Idoc adapter) scenario - restart message

Hello All,
I have scenario as below.
FTP->XI->CRM
The sender adatper is File Adapter, FTP.
Recv. adapter : IDOC adapter.
In CRM, there were middleware settings for idoc processing.
For an interface, in XI, i had a problem in getting a file of 10 Mb in size, so the file is split and i have made the XI sender adapter 'Z_PRICE_NEW20061004*.txt', so it picks all files within 5 mins and i have almost 104 XML messages.
Now the problem is a quite no. of message are ended up with error status in outbouond process in XI.
How can i reporcess the message? As the file is deleted from FTP? i ahve to do anything with the failed message.
A quick help is highly appreciated.
Thanks in advance.
Best Regards,
Jilan Bhasha

Hi ,
This weblog will help you....
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
sekhar

Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

Hi,
I am currently working on a project with the following requirements
1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
In otherwords, a inbound and outbound integration.
What I have tried so far and my results:
Scenario A
1. Enabled MTOM on SOA composite by attaching wsmtom policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
Scenario B
1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
Result for Scenario A with file size less than 1 MB:
Flawless execution with sub-second response times
Result for Scenario A with file size of 8MB
First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
Result for Scenario B:
The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
Thanks
regards,
Johnny

I think this is due to the underlying mechanism of weblogic classloading..
You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
3- Get the oracle support admins at your client site to approve your request for support access.
4-Once they approve , you can access the support site and raise service requests.

HTTP Post Outbound scenario - Error 110 - Timeouts in SMICM Tracefile

HI There
We have a scenario where we do a HTTP post using the HTTP Plain Adapter to a SMS service provider from a message received from a BW system via RFC, It works perfectly in our development system but we cannot get it working in our production system
In SXI_MONITOR the message fails with the error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Running a trace in SMICM shows the following in the tracelog
[Thr 4632] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 4632] IcmReadFromConn(id=9/140033): request new MPI (0/0)
[Thr 4632] MPI<3018f>19#4 GetOutbuf -1 cb2250 65536 (0) -> 0DE122B0 0
[Thr 4632] NiIRead: hdl 43 recv would block (errno=EAGAIN)
[Thr 4632] NiIPeek: peek for hdl 43 timed out (r; 500ms)
[Thr 4632] NiIRead: raw read for hdl 43 timed out (500ms)
[Thr 4632] IcmReadFromConn: read failed with timeout: 500 -> roll out
[Thr 4632] MPI<3018f>19#5 WriteOOB 00000000 02000000 09000000 01
[Thr 4632] MPI<30190>15#11 ReadOOB 01000000 01000000 2D000000 00 -> 0
[Thr 4632] IcmHandleOOBData: Received data on 1st MPI (seqno: 1, type=1, reason=1): 45/14512/0
[Thr 4632] MPI<3018f>19#10 ReadOOB 01000000 01000000 2D000000 00 -> 0
[Thr 4632] IcmHandleOOBData: Received data on 2nd MPI (seqno: 1, type=1, reason=1): 45/14512/0
[Thr 4632] IcmHandleOOBData: Received context key (type=1, reason=1): 45/14512/0
[Thr 4632] NiWakeupExec: send wakeup signal to 64997 (sock 16992)
[Thr 4632] IcmConnRollOut: connection (id=9/140033) rolled out:
[Thr 4632] CONNECTION (id=9/140033):
 used: 1, type: 1, role: 2, stateful: 0
 NI_HDL: 43, protocol: HTTP(1)
 local host: 200.1.1.100:3405 ()
 remote host: 196.30.220.242:80 ()
 status: READ_RESPONSE
 connect time: 23.07.2008 07:13:10
 WP-status: ROLLED OUT (Context: 9, Role: 2)
 tid: 45, mode: 0, uid: 14512, roll-reason: ICM_ROLL_NETTIMEOUT
With the following 2 lines ir differs from our development system - this is the point where it goes wrong
[Thr 4632] NiIRead: raw read for hdl 43 timed out (500ms)
[Thr 4632] IcmReadFromConn: read failed with timeout: 500 -> roll out
We have already checked the following between the 2 systems
1. Configuration in Netweaver Administrator is Consistent
2. Communication channel and Mapping is consistent
3. Profile parameters for ICM are consistent
Any ideas as to what this problem could be
Many Thanks

Hi
after you download the html client.
go to view -> source
and enter the present xiusername & pwd which you using and save.
Enter the below details in http client.
Servername : XIServername
Port : 80<instancenumber>
Client : XI server client number
Server : Sender service (business service or busienss system or integration process...when it comes to the HTTP adapter you need to create the business service that business service name you need to enter )
Interface name : outbound interface name
namespace : name for interface.
If you doing Party scenario enter the Party, Agency and Schema details also else optional.
Enter the Input xml data while enter the input data remove the first xml version line and paste the other data.
click on send message.
check the exchange profile set the httpport or not
check these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/http%2bto%2brfc%2bsynchronous%2bscenario%2b-%2bfaqs
HTTP to RFC - A Starter Kit
/people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
Regards,
Suryanarayana

SAP crm implementation business scenario for crm marketing project

Dear guru's
Can any body will help me to know about one sap CRM marketing implantation project business scenario.
Like one full process of marketing project and the integration of the other modules like r/3,
Like what end users do if we implanted the marketing project for one company,
Any industry but please give me detailed with the documentation if possible.
I practice with the best practice but iam not able to the comparison to the business process of the company.
No need to tell about company details I want to know only the process.
Like which type of company it is suet or which type of company it is not sute.
If there is any document like this type of company sauté for the marketing and like this type of company suites for the service modules like that.
this is sivaanjith this is my please help me to come out of this confusion.
Reards.
siva anjith

hi
well talking about the implementation project in CRM
let us assume we are implementing it in BANKING industry
here the requirement is in improvement in the field processing and all the effeciency of the sales or feet on street
so we implement the CRM marketing with CIC
what it will do that we start with first the readiness document that what all are the requirement of the bank and how the company can cope it with the help of CRM
then we prepare the BLUEPRINT to state that the data to be processed will be strucutured in CRM in how many phases or the timely schedule of the roll over of CRM in bank
next up we start with the configuration ,like we have to start campaigns and generate leads for the banks which may get converted into the opportunities
so have to do all the configuration of CRM according to the requirements being given
one thin g i forgot which is very imp is that we do requirement gathering,its pretty imp part of entire process
after getting these only we can do whatever we want with CRm
so after that we realise the configuration in realisation phase then we do those UATs and SITs
this way we phase out the CRM in any sector
just a gist of everything
hope i cleared some air
best regards
ashish

CRM 2007 MDF Scenario

Hi Gurus,
We are looking for any performance upgrade notes/ helps on CRM 2007 for MDF Scenarios.
Can you please tell me the same.
Prompt response required at the earliest
Thanks & Regards,
Mukund

To find the BAPI, there is no easy way. Either you know it from some documentation, or you try to find it yourself based on its name (i often use wildcards to see what is available and then test the function module to see if it is the one i need or not). The other option is debugging
For the 2nd possibility, try reading the documentation available there:
http://help.sap.com/saphelp_crm60/helpdata/en/fb/6745717b59421e9fe15b07995dca30/frameset.htm
It should help you understanding the concepts.
Good luck,
Xavier

CRM-XI-File Scenario

Hi all,
I am working on CRM-XI Scenario.
I have no idea about this CRM.
but i have to pick data from CRM to XI.
>>so i request, ...........please give me some guidance....& Blogs....
for this.
>>>I want to use here RFC/Idos...........
please help....
Regards,
Umesh Laxkar

Hi Umesh,
Adding to above information....also find the below blogs.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
https://www.sdn.sap.com/irj/sdn/advancedsearch?querystring=rfc%20adapter%20step%20by%
20step&SearchPluginName=sdn_weblog&SelectedCustomProps=resourcetype(value=sdn_weblog)RFC Web Blogs
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
BAPI - Search -
https://www.sdn.sap.com/irj/sdn/advancedsearch?querystring=bapi%20adapter%20step%20by%20step&searchpluginname=sdn_weblog&selectedcustomprops=resourcetype(value=sdn_weblog)
Thanks and Regards,
Chandu

CRM Middlware Outbound Scenario

Similar Messages

Maybe you are looking for