Crm_ml_preview - Unable to print with smartforms with bitmap images.

I'm using CRM 4.0 and I've an issue on Enterprise Portal when I try to print an Activity.
In fact, If I press the botton "PRINT" a new window opens with following URL:
http://myhost:8080/sap/bc/bsp/sa/crm_ml_preview/ml_preview.do? ...
If the smartform linked, has a bitmap inside (for example the company logo) I receive from this linhk a blank page. If the smartform contain only text, everithing is printed correctly.
With SAP gui, inside CRM system both smartfoms (with or without bitmaps) are printed correctly. This problems arise only when I try to print the activity from Enterprise Portal.
Any suggestion to solve the problem?
Regards
Luca Sozio.

It's an HP P3005dn (duplex+network) printer. OS X simply recognized the printer on the network and set itself up accordingly (without the option of selecting PCL or Postscript). The Windows computers in the office, though, - ugh - it was ugly getting them set up. None of them would recognize the printer on the network, and couldn't even browse for it and find it. I wound up having to download Bonjour for windows, and set it up that way. I downloaded the drivers from HP.com, and believe I set them all up to print using PCL.
It sounds like PCL v. PostScript may be the issue; is it possible to print using PCL on Macs?

Similar Messages

Unable to Print in Windows with Vmware Fusion HP LaserJet 1006

Prints fine on the Mac with 10.6.1 and HP driver updates.
Printer worked flawlessly with Leopard 10.5.8
Will not print in windows. Open the print queue and it says it is printing (it isn't), sometimes the message is that it is waiting for the printer to become available, (printer is available).
Any help will be greatly appreciated.
Alan

The print job gets sent to the printer, but it wont print. It says waiting for printer to become available. When this happens I am also unable to print from the Mac side and have to restart the computer to be able to print from the MacBook. Simply turning off the printer and then turning it on doesn't help.

Just installed 10.6. Unable to print word document with outline numbering

Just installed 10.6.8. Can't print Word document with outline numbering.

You mean USB HUBs, correct? Not routers.
Yes remove the HUBs and try the drives connected directly to the computer.

Unable to Print MSDS's with WWI

Hi,
I have a problem that SAP printing is working fine, however users are unable to print MSDS's, The prints are showing up as completed in the SAPLPD however in the spool requests for the printers these are not showing up (normal SAP printing to these printers are working fine). I have checked the rfc connection to the WWI server and this is working fine.
Are there any other things I should check for this problem?
Any ideas would be a big help
Thanks
Jay

Within the WWI monitor I had to reactivate the server.
MSDS's printing now.
Thanks for your help

Truble with smartforms with word

Hello All.
i have a trouble with smartforms when I creat text , the smartforms open word page and the paragraph i was created within style did'nt show.
Note.
I have Office 2007
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Sep 1, 2008 4:54 PM

Hi
If you dont want MS word in your smartform text deactivate it in tcode:i18N
i18n customizing -->click on MS word as editor uncheck the checkbox of sapscripts and smartforms.
Then come back to your smartforms and then include your smartstyles in smartforms.
or
Incase if you want to include smartstyle in the smartforms.
Then output options tab include your smartstyle.
Regards,
sravanthi

Printing same smartform with different set of records continuously.

Hi SDNer,
Suppose a table contain Studet info like the following one:
ID   Name    Sub1       Sub2     Sub3
1    xxx        sb11       sb12     sb13
2    yyy        sb21       sb22     sb23
3    zzz        sb31       sb32     sb33
Think that the smartform contain only a single page(Suppose smartform of student result).In the Selection screen User can put the range of ID.When User put 1-3 the smartform print 3 pages---1st for the student with id 1,2nd for student with id 2 and 3rd for student with id 3.when user put the input 1-2 the smartform print 2 pages.I need your help to accomplish such a scenario.
Thanks in advance.
Regards,
Sarbajit.

Hi,
As per user's selection criteria you need fetch data in your driver program and need to store it in an internal table. The same internal table you need to pass to smartform. to handle your requirement of displaying one student record per page you need to use COMMAND node (with some condition). Using this you can force your smartform for page-break.
I hope this will help you to start and explore further.
Regards,
Sambaran Ray

Unable to print book - error with page info

I'm trying to print a 50 page book. No problem assembling, uploading or purchasing but after a day or two I always get the following message from the Apple store.
Due to an error when your order was submitted, the file we received contains incorrect page information. As a result, Apple is unable to process your order and you will not be charged. Before submitting a new order, we have some suggestions for correcting the issue:
Update your software.
Preview your product in iPhoto or Aperture.
Place your order again.
If you are unable to update iPhoto, or are prompted to purchase updated software, you may consider the troubleshooting steps below:
Open iPhoto and go into your book project.
Choose to view "All Pages".
Once you are on the "All Pages" screen, click on the last page that appears.
Choose "Layout" and then select "Spread" from the "Layout" drop down menu.
You should then see that the rear flap page appears. Subsequently, you can make the desired customizations before resubmitting your file.
Preview your product in iPhoto or Aperture.
Place your order again.
We appreciate your business and apologize for any inconvenience.
This is the third time this has happened. I've tried both sets of instructions. The final time, the .pdf preview displayed but the formatting of the page was all out of whack - photo sizes incorrect, wrong font, wrong font sizes - The software is updated, I'm running OS Mavericks and iPhoto 9.5.1.
I'm all out of ideas, here. Any input greatly appreciated.

Paul:
As Terence pointed out it's a damaged library, most likely the database file, Library6.iPhoto. To protect from future occurrences of such a damaged library you can keep a current backup copy of the database file on hand and ready to replace in the library package if you ever get the blank or "!" indication again for the full sized file. See the tip at the end of my signature for an easy way to make those backups.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Unable to print AP Check with MICR on AIX. The PDF output displays the MICR

I have peculiar situation here and I would really appreciate any help I can get.
The issue:
The requirement here is to print an AP Check with the MICR. Using XML I have defined a template and when I preview the output in PDF, the MICR string displays fine. The same template also works fine from within Oracle Applications.
However, when I specify a printer and set the number of copies to 1, nothing is printed.
The issue that our DBA noticed was that the PDF to PS converter is dropping the MICR string and as a result nothing is getting printed. The client uses GhostScript for PDF2PS conversion and they have not been able to resolve this issue.
Has anyone encountered a similar issue? If so, what can be done to resolve this issue.
Thanks in Advance,
Srini

I think that means tool is either not installed or not in path:-
"The Xpdf language support packages include CMap files, text encodings, and various other configuration information necessary or useful for specific character sets. (They do not include any fonts.) Any or all of these can be installed by simply unpacking the tar file and adding a few lines to your xpdfrc configuration file (see the README file inside each package for details).
have you seen what needs to be changed in xpdfrc configuration file?
Thanks,
JD

Windows 7: Unable to print pdf documents with Reader 9.3.0

I have the following problem.
Right now we are on the way to deploy Windows 7 in our environment. Now i have come over a problem with Adobe Reader 9.3.0, Windows 7 and our older printer modells from HP (4000er and 4050er). With them I can't print out any pdf document because in reader 9.3.0 the default language level is set to "Level 3". If i change this drop down to "Level 2" I can print out the document without any problems.
Question is: How can I permanently set this option to default to "Level 2" (see screenshot - this is found if you hit the advanced button in the printing dialog).
Any help is apreciated...

When using a 32-bit browser, the PDF document should open in the browser (using the Adobe Reader add-on).
When using a 64-bit browser, it will ask you if you want to save the document, or open in Adobe Reader.
If neither of these methods work, then it is the website that does not let you download the document (for whatever reason, e.g. server overload).
Try if you can open this document: http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_10.1.2.pdf

Best practices for working with large placed bitmap images?

Hey all,
I need some advice on the best way to approach building these files. I've been working on some banners that are very large: 3 x 7 feet.
Each banner has a simple vector graphic treatment at the top and bottom (rectangle with a different colored rule on top, and vector logo) and a small amount of text, just a URL and a headline.The headline is type (not converted to outlines) and usually has some other effect applied to it, say a drop shadow or outer glow. Under these graphics is a full bleed image. The placed images need to be 150ppi at actual size, so they're honking big, sometimes up to 2GB. Once the layouts are approved, they have to go to a vendor for output.
The Illustrator docs are really large, and I've read in other threads how to combat that (PDF compatibility, raster settings). But even still, does anyone have any insight into the best way to deal with these things? The dimensions are large, and then the images are large, and it just makes for lots of looking at the spinning ball of death...
If it were me, I'd build them in InDe, but the vector graphics need to be edited for each one, and I so don't like to do that in InDe unless forced. To me, it's still ultimately a page layout app, not a drawing app. (Old school here.)
FYI, our machines are all MBPs with 8G ram and the latest Intel Core 2 Duo chips, 2.66 and 2.8GHz. If we keep the files local (as opposed to working on the server) it should be fairly zippy... No?
Any advice is appreciated, thanks!

You can get into memory trouble with very large placed pdf files. Tiffs too.
This has to do with the preview, which contains much more information than you need for working with.
On the other hand if you place EPSs and take care not to turn on overprint preview you can get away with huge files.
If you do turn on overprint preview your machine will slow down a lot and the file may become totally unmanageable.
Compare this with to InDesign where you can control the quality of the preview. A hi-res preview will slow you down and most often you don't need it anyway.
I was working (in Illie) the other day on much larger files than you mention – displays for whole walls – and had some considerable trouble until I reverted to the old EPS format. They say it's dying but it ain't dead yet .

I am unable to print main VI due to "image.ccp"

I am abla to print sub VI but when try to print main Vi it says Failure:"image.ccp" line 11326.

Jeremy,
I think that there is more to it than this. I have a test set that has been running essentially the same software for 2 years. Win 2K, LV 7.1. The print section of the program hasn't been changed. A month ago we had this problem intermittently. We updated the printer drivers, and changed to a different printer (different type) all to no effect. A week or so later it mysteriously stopped. Now the problem has returned. If we select File>>Print Window it will print OK. I have tried both Print Panel.vi and Easy Print VI Panel or Documentation (string).vi.
Jim
Jim
LV 2013

Printing Smartform with Table data from PrintProgram

Hi,
Can any one explain the steps involved in printing the Smartform with the data from the Print Program table. How to fit table in the Smartform i.e, while designing the Smartforms layout for the table.
Thanks & Regards

Hi,
As data is coming from the print program in the table. Do the following procedure
1. In the form interface ---> Declare the internal table as same structure as in the print program. for ex: you r passing MARA table data then declare it as itab type table of mara.
2. In the window you want to create the table, right click > create> table.
3. Go to data tab give the internal table name and work area .
4. Now go to General tab-->Details.
5. Declare the line types.
6. Right click on header/main area/footer -->create table line.
7. Now give the line type which you want to use.
8. In the displayed columns>right click> create text node.
9. In the text node &mara-matnr&.
Procedure to create line type:
1. Double click on table
2. Go to table tab --> details
3. Give the table width (width you want to display on the screen should be less than or equal to the window width).
4. Line type --> Divide this into no of column you want to have in header/item.
Note: total length of all columns should be equal to the table width.
5.save.
Br,
Laxmi

Can't print to pdf with Acrobat 7.1.0 in Vista

I am unable to print to pdf with Acrobat 7.1.0 in Windows Vista. I used to be able to, now all of a sudden that functionality is gone. I haven't knowingly done any upgrades since the last time I successfully printed to pdf, but I do have autoupdates enabled, so I can't say what Microsoft may have been up to recently. When printing to pdf from Internet Explorer 7, the window simply closes. A printer icon shows up in the system tray but registers 0 print jobs and soon disappears. When printing to pdf from Word (2003), Word crashes with a series of message boxes saying something about attempting recovery. Any suggestions?

AcroTray is running. Thanks for asking that question, as this is one thing that I have disabled on computers running XP, since disabling it in XP doesn't adversely affect my limited use of Acrobat in any way. I have not disabled it with Vista. I tried printing to file, and that also caused the window to close. I happened to have a second IE7 window open when attempting to print to file, and it did not close, so it only affects the active window. I don't know if that helps at all; when a program crashes, I typically observe it take with it all open windows associated with that program, so the fact that this is only closing the active window seems potentially useful to me in my ignorance of what is the root cause.

Using a script to get the color of a colorized Black & White Bitmap image

I've been running into this wall for quite some time and would greatly appreciate any help that can given for it.
I have an Illustrator script that runs inside of a BridgeTalk session within an InDesign script. Yeah, it's complicated. The upshot is that the Illustrator part opens up an EPS file, looks through all objects on a certain layer in that file, and returns an array of the colors used in it. So, it looks at fill colors, stroke colors, gradient stops, etc. One of the biggest stumbling blocks (next to PlugIn Items, which I'll ask about in a separate post) is getting the color of raster images.
Most raster images, I realize, are going to be CMYK or RGB images, but our company mostly deals with either Grayscale images or Black & White Bitmaps that are embedded in the EPS file. Those two allow the ability to colorize them by simply selecting them and then choosing a color, such as a spot PANTONE color from one of their color books.
Now, I need the script to read the color that the raster image has been colorized with. This works okay for images that have a GrayScale color space, as the script just looks at Colorant[0] of that image. However, I run into a problem with Black & White Bitmap images. Here's a piece of code that I try to make work with an EPS file that has a raster image:
var document = app.activeDocument;
for (var i = 0; i < document.layers[0].pageItems.length; i++) {
          // Stepping through each item on the layer.
          var currentItem = document.layers[0].pageItems[i];
          $.writeln("Current item is " + currentItem.typename);
          $.writeln("Number of channels is " + currentItem.channels);
          $.writeln("Color Space is " + currentItem.imageColorSpace);
          $.writeln("Colorized Grayscale? " + currentItem.colorizedGrayscale);
          $.writeln("Number of Colorants: " + currentItem.colorants.length);
          for (var j = 0; j < currentItem.colorants.length; j++)
                    $.writeln("Colorant number " + j + " is " + currentItem.colorants[j]);
          $.writeln("Its parent is " + currentItem.parent);
          $.writeln("Parent's typename is " + currentItem.parent.typename);
This code runs successfully on an Illustrator file that has a Black & White Bitmap image on the top layer, but if you try and run it, you'll see the problem: Even if you've colorized your Bitmap image with a PANTONE spot color (and the script even returns "true" on the line "Colorized Grayscale?"), Colorant number 0 is "Gray". It should be the spot color assigned, not "Gray".
Can anyone please help me figure out how to get the script to recognize the actual colorant of a Black & White Bitmap image in Illustrator?

If you're a professional photographer with 50,000 pictures stored now and more coming all the time, you need to forget about using iPhoto and get yourself some professional-quality digital asset management software. iPhoto is not meant for people like you, and instead of providing a simple, elegant one-stop answer to all your needs, iPhoto is actually complicating your life.
You need an application that will:
- catalog ALL your images and keep track of where they are, no matter how many DVDs, folders, partitions or hard drives they're spread over;
- display thumbnails of ALL of them, even when the DVD that contains them is not present in any drive, so you can select all the ones you want for a project;
- find and copy (or export) the originals of all the files you've selected in the browser window, even if it means prompting you to insert the necessary DVDs for all of them.
I suggest Googling "digital asset management software Macintosh" and seeing what turns up. I used to use an old version of Extensis Portfolio, and even that would have been better for your purposes than iPhoto is.

Colouring up bitmap images

Hi
I have a 98 page document with the same bitmap image on every spread. The image has been coloured up with a special colour in Indesign but unfortunately hasn't been set to overprint. I've tried various combinations in find/replace to find the image but nothing i try works? Any ideas?

I've never had a lot of luck with Find/Change and objects. If it's on the master page, just select it and open the Attributes panel to set the overprint.
If it's not on the master page, well, it probably should be.
And of course, I have to ask why you would want anything other than Black to overprint? Perhaps the rela problem here is that the image is being covered up by someting in front of it on the document page. If that's the case (even if you mean to overprint it), put it on a layer higher in the stacking order. Master page obejcts are always behind document page objects on the same layer.

Crm_ml_preview - Unable to print with smartforms with bitmap images.

Similar Messages

Maybe you are looking for