CRM online and MSA - correspondig tables in both modules

We are in a project to move from MSA to CRM online. We have a lot of reports running on MSA. Now we have to recreate them base on CRM online. Those reports are based on the MSA tables. The problem is, nobody (consultant) can tell us which are the correspondig tables in CRM online. We need the original tables to be able to recreated our reports.
Does anybody have any information about that?
Thanks for any help.
Roland

Hello Roland,
MSA table names are closely related to R/3 table names.
For eg: MARA table in R/3 is SMOMARA in MSA.
So MSA table name would be SMO<R3-TABLENAME> , in most of the cases.
So, if you know R/3 to CRM table mapping , then above might help you to find out the R/3 table name first and then
CRM table.
Also, there is a table called SMOFMAPTAB which should contain MSA to CRM table mapping. But you might not get
a mapping always, since it might not have maintained.
You can check it as well.
SMOFMAPTAB-SFATABNAME (MSA table name)
SMOFMAPTAB-R3TABNAME (CRM table name)
Hope this helps!
Best Regards,
Shanthala Kudva.

Similar Messages

CRM 2013 Online - sending email with CRM Online and jQuery

Hi,
I have a html page in webresource in a CRM 2013 Online form. There is a button to send an e-mail from the html page. Because this is an embedded html, I will not be able to create a plug-in to trigger 'send an e-mail'. The best bet
is to send an e-mail via javascript.
I found an article about 'Sending email with SharePoint and jQuery',
http://geekswithblogs.net/ThorvaldBoe/archive/2014/07/03/sending-email-with-sharepoint-and-jquery.aspx
Is there a similar Jquery way we can send e-mail from CRM 2013 Online? Thanks.

Hello,
Actually you can send email through plugin using Actions feature. Recheck my articles about the feature -
http://a33ik.blogspot.com/search/label/Action
In case you anyway want to send your email directly you should recheck following articles:
http://mileyja.blogspot.com/2012/02/create-email-activity-in-microsoft.html
http://mileyja.blogspot.com/2012/02/send-email-synchronously-in-microsoft.html
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog

How can I customize tooltip in CRM-GUI and MSA

Dear Expert,
I want to customize tooltip in CRM-GUI & MSA.
I found the problem that description length of field is CHAR20.
So, it's too short when define the meaning.
For CRM-GUI, normally have no tooltip in drop-down list field.
can i customize to use tooltip or any trick.
For CRM-MSA, there are tool tip show, but it show the value in field that the same wording. Can I customize to show more.
Any help will be appreciate.
Siriporn T.

Dear Expert,
I want to customize tooltip in CRM-GUI & MSA.
I found the problem that description length of field is CHAR20.
So, it's too short when define the meaning.
For CRM-GUI, normally have no tooltip in drop-down list field.
can i customize to use tooltip or any trick.
For CRM-MSA, there are tool tip show, but it show the value in field that the same wording. Can I customize to show more.
Any help will be appreciate.
Siriporn T.

MRBR Report- Price and qty variance tables/structure/Function module

Hi
I am in the process of developing a customised report similar to MRBR report. I am not very clear on the logic used for "Difference Qty" and "Difference Value".
MRBR is taking values from strucrure ARSEG. Is anybody aware if there are any tables from where we can get this information ? Are there any Function modules that SAP uses to arrive at this difference.
I am aware that we canget the information from EKBE table and calculate our seleves. At times the values do not match and the logic do not seem to be straight forward.
Has someone worked around this area ?
Thanks for your time in advance.
Dasaradh

Hi,
RBKP_BLOCKED is one important table from where this program gets the blocked invoices.
Hope this helps.

Still 'Pending Send' after successful inbound and outbound test. CRM Online 2013

I am using CRM Online and Office365. After testing successfully within the admin window for inbound and outbound- emails are still not sending- sitting in Pending Send. Triggers for Email Router is set for inbound and outbound. What
am I missing?

Try the following:
http://www.powerobjects.com/blog/2013/09/19/dynamics-crm-email-router-troubleshooting-101-outgoing-emails/
I always find this page a good place to start to rule out most of the common issues.

How an sale order Created in CRM online will be reflected in MSA

Hi,
Could any one explain how the sale order created in CRM online reflected in MSA.
Give me an idea how data from CRM application is tranfered to MSA.?what is the role of MDW and MAR(mobile application repository) in mobile sales?.
Edited by: Shiva kumar avvula on Jul 23, 2008 11:36 AM

hi,
You can create sales transactions, that is, quotations or sales orders, on both the mobile client and in CRM Enterprise. You can access your documents at any time and place. You can make changes to them as required, for example in the office, or on a laptop during a customer visit. Sales transactions are exchanged between systems using CRM Middleware so that you are always informed about current quotations and inquiries.
First CRM data will store in CDB( consolidate data base), from here transactional data will transfer to MObiles through communication station.
Database that contains data relevant to replication (CDB tables) for mobile scenarios. The CDB is a logical part of the entire CRM database, which also contains application data.
What evet the data coming from CRM online that will convert into SBDOC and thorugh communication station it will reach mobiles.
for more details check the link.
http://help.sap.com/saphelp_crm60/helpdata/en/29/53583c2e39e433e10000000a114084/frameset.htm
Regards
Srinu

Tracking status in CRM-online of MUP in error for MSA clients

Hi,
We are using the Upgrade console to distribute MSA application updates via the middleware.
When these are in error, a status entry and log file errors are put back into the CRM-online tables SMOGSYSMP and SMOGSYSMON.
Has anyone written any ABAP's to interpret these tables into a more readable format?
Thanks,
Graham

Hi Simran08,
According to your description, you fail to add your report to CRM due to the custom code. Right?
In this scenario, based on my knowledge, I find two issues in your custom code.
You pass the array Items as argument to the function. This array is from the LookupSet() function. However, it returns an concatenated string with commas. When you convert it into decimal, it will throw error.
In your For Each loop part, we should follow the format below:
For Each element In group
[statements]
[Exit For]
[statements]
Next [element]
It seems you miss Item after Next.
If you still have any question, please feel free to ask.
Best Regards,
Simon Hou

CRM ONLINE 2013: On Approval Of Quotation, Run Report, Generate PDF and Send an Email With PDF as attachment

Hi,
I am using CRM ONLINE 2013.
How to automate below process?
1. On Approval Of Quotation, Run Report.
2. Generate PDF.
3. Send an Email With PDF as attachment.
As i have gone through many forums for this topic, but creating a plugin code for generating Report PDF is not possible in CRM ONLINE.
So, What is the alternate way to do this..?
Thanks.

This is my entire code mentioned below:-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
    <title></title>
    <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
    <script type="text/javascript">
        if (typeof (SDK) == "undefined")
        { SDK = { __namespace: true }; }
        SDK.JScriptRESTDataOperations = {
            _context: function () {
                if (typeof GetGlobalContext != "undefined")
                { return GetGlobalContext(); }
                else {
                    if (typeof Xrm != "undefined") {
                        return Xrm.Page.context;
                    else { return new Error("Context is not available."); }
            _getServerUrl: function () {
                var serverUrl = this._context().getServerUrl()
                if (serverUrl.match(/\/$/)) {
                    serverUrl = serverUrl.substring(0, serverUrl.length - 1);
                return serverUrl;
            _ODataPath: function () {
                return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
            _errorHandler: function (req) {
                return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
            _dateReviver: function (key, value) {
                var a;
                if (typeof value === 'string') {
                    a = /Date$([-+]?\d+)$/.exec(value);
                    if (a) {
                        return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
                return value;
            Create: function (object, type, successCallback, errorCallback) {
                var req = new XMLHttpRequest();
                req.open("POST", this._ODataPath() + type + "Set", true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 201) {
                            successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send(JSON.stringify(object));
            Retrieve: function (id, type, successCallback, errorCallback) {
                var req = new XMLHttpRequest();
                req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 200) {
                            successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send();
            Update: function (id, object, type, successCallback, errorCallback) {
                var req = new XMLHttpRequest();
                req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.setRequestHeader("X-HTTP-Method", "MERGE");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 204 || this.status == 1223) {
                            successCallback();
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send(JSON.stringify(object));
            Delete: function (id, type, successCallback, errorCallback) {
                var req = new XMLHttpRequest();
                req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.setRequestHeader("X-HTTP-Method", "DELETE");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 204 || this.status == 1223) {
                            successCallback();
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send();
            RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
                if (filter != null) {
                    filter = "?" + filter;
                else { filter = ""; }
                var req = new XMLHttpRequest();
                req.open("GET", this._ODataPath() + type + "Set" + filter, true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 200) {
                            successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send();
            __namespace: true
    </script>
    <script type="text/javascript">
        //Create Email and link it with Order as Regarding field
        var Xrm;
        var email = new Object();
        var ownerID = "";
        var CustomerId = "";
        if (window.opener) { Xrm = window.opener.Xrm; }
        else if (window.parent) { Xrm = window.parent.Xrm; }
        //Get ownerid who send email of quotation to customer
        function GetOwnerID() {
            var owner = Xrm.Page.getAttribute("ownerid").getValue();
            ownerID = owner[0].id;
            var ownerName = owner[0].name;
            var entityType = owner[0].entityType;
            GetToEmailGUID();
        //Get customerid who receive email of quotation from owner
        function GetToEmailGUID() {
            var Customer = Xrm.Page.getAttribute('customerid').getValue();
            CustomerId = Customer[0].id;
            var CustomerName = Customer[0].name;
            var entityType = Customer[0].entityType;
            //if CustomerId is type of "Account" then get Primary Contact id of that account
            if (entityType == "account") {
                var contact = Xrm.Page.getAttribute("customerid").getValue();
                if (contact === null) return;
                var serverUrl = Xrm.Page.context.getClientUrl();
                var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
                var req = new XMLHttpRequest();
                req.open("GET", oDataSelect, false);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
                req.onreadystatechange = function () {
                    if (req.readyState === 4) {
                        if (req.status === 200) {
                            var retrieved = JSON.parse(req.responseText).d;
                            CustomerId = retrieved.PrimaryContactId.Id;
                        else {
                            alert(this.statusText);
                req.send();
        function CreateEmail() {
            GetOwnerID();
            email.Subject = "Email with Report Attachment";
            //Set The current order as the Regarding object
            email.RegardingObjectId = {
                Id: Xrm.Page.data.entity.getId(),    //Get the current entity Id , here OrderId
                LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
            //Create Email Activity
            SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
        // Email Call Back function
        function EmailCallBack(result) {
            email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
            var activityPartyFrom = new Object();
            // Set the From party of the ActivityParty to relate an entity with Email From field
            activityPartyFrom.PartyId = {
                Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
                LogicalName: "contact"
            // Set the "activity" of the ActivityParty
            activityPartyFrom.ActivityId = {
                Id: result.ActivityId,
                LogicalName: "email"
            // Now set the participation type that describes the role of the party on the activity).
            activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
            // Create the from ActivityParty for the email
            SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
            var activityPartyTo = new Object();
            // Set the From party of the ActivityParty to relate an entity with Email From field
            activityPartyTo.PartyId = {
                Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
                LogicalName: "systemuser"
            // Set the "activity" of the ActivityParty
            activityPartyTo.ActivityId = {
                Id: result.ActivityId,
                LogicalName: "email"
            // Now set the participation type that describes the role of the party on the activity).
            activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
            // Create the from ActivityParty
            SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
        //ActivityParty From Callback
        function ActivityPartyFromCallBack(result) {
        //ActivityParty To Callback
        function ActivityPartyToCallBack(result) {
            GetReportId('ABM_Infotech_SalesQuote');
        //Create attachment for the created email
        function CreateEmailAttachment() {
            //get reporting session and use the params to convert a report in PDF
            var params = getReportingSession();
            //Email attachment parameters
            var activitymimeattachment = Object();
            activitymimeattachment.ObjectId = Object();
            activitymimeattachment.ObjectId.LogicalName = "email";
            activitymimeattachment.ObjectId.Id = email.ActivityId;
            activitymimeattachment.ObjectTypeCode = "email",
                activitymimeattachment.Subject = "File Attachment";
            activitymimeattachment.Body = encodePdf(params);
            activitymimeattachment.FileName = "Report1.pdf";
            activitymimeattachment.MimeType = "application/pdf";
            //Attachment call
            SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
        //ActivityMimeAttachment CallBack function
        function ActivityMimeAttachmentCallBack(result) {
            var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
            var width = "800px";
            var height = "600px";
            window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
            // To open window which works in outlook and IE both
            //openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width,
height, features);
        //This method will get the reportId based on a report name that will be used in            getReportingSession() function
        function GetReportId(reportName) {
            var oDataSetName = "ReportSet";
            var columns = "ReportId";
            var filter = "Name eq '" + reportName + "'";
            retrieveMultiple(oDataSetName, columns, filter, onSuccess);
        function retrieveMultiple(odataSetName, select, filter, successCallback) {
            var serverUrl = Xrm.Page.context.getServerUrl();
            var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
            var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
            if (select) {
                odataUri += "$select=" + select + "&";
            if (filter) {
                odataUri += "$filter=" + filter;
            $.ajax({
                type: "GET",
                contentType: "application/json; charset=utf-8",
                datatype: "json",
                url: odataUri,
                beforeSend: function (XMLHttpRequest) {
                    XMLHttpRequest.setRequestHeader("Accept", "application/json");
                success: function (data) {
                    if (successCallback) {
                        if (data && data.d && data.d.results) {
                            successCallback(data.d.results);
                        else if (data && data.d) {
                            successCallback(data.d);
                        else {
                            successCallback(data);
                error: function (XmlHttpRequest, errorThrown) {
                    if (XmlHttpRequest && XmlHttpRequest.responseText) {
                        alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
        function onSuccess(data) {
            reportId = data[0].ReportId.replace('{', ").replace('}', ");
            CreateEmailAttachment(); // Create Email Attachment
        //Gets the report contents
        function getReportingSession() {
            var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
            var retrieveEntityReq = new XMLHttpRequest();
            var Id = Xrm.Page.data.entity.getId();
            var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
            quotationGUID = quotationGUID.replace('}', "");
            var reportName = "ABM_Infotech_SalesQuote"; //set this to the report you are trying to download
            var reportID = "751089AA-74B8-E211-B52F-D8D3855B253B"; //set this to the guid of the report you are trying to download
            var rptPathString = ""; //set this to the CRMF_Filtered parameter
            var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition
attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
            retrieveEntityReq.open("POST", pth, false);
            retrieveEntityReq.setRequestHeader("Accept", "*/*");
            retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
            rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName="
+
                            reportName + "&isScheduledReport=false&p:ABMFilteredQuote=" + strParameterXML;
            //remove the part starting from &p:salesorderid if your report has no parameters
            retrieveEntityReq.send(rptPathString);
            var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
            var ret = new Array();
            ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
            x = retrieveEntityReq.responseText.indexOf("ControlID=");
            ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
            return ret;
        var bdy = new Array();
        var bdyLen = 0;
        function concat2Bdy(x) {
            bdy[bdyLen] = x;
            bdyLen++;
        function encodePdf(params) {
            bdy = new Array();
            bdyLen = 0;
            var retrieveEntityReq = new XMLHttpRequest();
            var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
            "&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
            "&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
            retrieveEntityReq.open("GET", pth, false);
            retrieveEntityReq.setRequestHeader("Accept", "*/*");
            retrieveEntityReq.send();
            BinaryToArray(retrieveEntityReq.responseBody);
            return encode64(bdy);
        var StringMaker = function () {
            this.parts = [];
            this.length = 0;
            this.append = function (s) {
                this.parts.push(s);
                this.length += s.length;
            this.prepend = function (s) {
                this.parts.unshift(s);
                this.length += s.length;
            this.toString = function () {
                return this.parts.join('');
        var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
        function encode64(input) {
            var output = new StringMaker();
            var chr1, chr2, chr3;
            var enc1, enc2, enc3, enc4;
            var i = 0;
            while (i < input.length) {
                chr1 = input[i++];
                chr2 = input[i++];
                chr3 = input[i++];
                enc1 = chr1 >> 2;
                enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
                enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
                enc4 = chr3 & 63;
                if (isNaN(chr2)) {
                    enc3 = enc4 = 64;
                } else if (isNaN(chr3)) {
                    enc4 = 64;
                output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
            return output.toString();
    </script>
    <script type="text/vbscript">
    Function BinaryToArray(Binary)
           Dim i
           ReDim byteArray(LenB(Binary))
           For i = 1 To LenB(Binary)
                 byteArray(i-1) = AscB(MidB(Binary, i, 1))
                 concat2Bdy(AscB(MidB(Binary, i, 1)))
         Next
          BinaryToArray = byteArray
   End Function
    </script>
</head>
<body>
    <input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html>

We have office 365 subscription and we need to merge our Microsoft Dynamics CRM online subscription to office

Hi,
We have office 365 subscription and we need to merge our Microsoft Dynamics CRM online subscription to office 365
For organization: Softtrends Software Pvt Ltd (https://softtrendssoftwarepvtltd.crm5.dynamics.com)
Office 365 organization : Softtrends Software Private Limited
[email protected]

Hi there,
If you already have two different Microsoft Online services accounts, then this is no easy task. If you sign up for two Microsoft Online services, using two different Microsoft Online services ID's, you basically need to choose which one to throw away, and
then do a migration from one to another.
If you have a lot of data in both of them, you could cross your fingers, and make a Service Request to Microsoft, hoping that they could do some magic for you, or at least tell you which migration track that's the easiest one.
The important part is that you first sign in to the service you want to keep, and then register for a new one using Sign in, in stead of Sign up. This way they are automatically liked to the same Windows Azure Active Directory tenant.
I hope I understood your question, and was able to help you here.
/Anders Eide

Is there any other solution for Adobe Flash plugin crashing than the posted one about updating Flash and Mozilla? I cannot open any PDF files online and updated both Mozilla and Flash player to most recent with no change in the crashing.

I was able to open PDFs online until version 8. Since upgrading to version 9 and now 10, I have crashes every time I try to open a PDF online and can see the form briefly for about two seconds before the plugin crashes. I followed instructions on the solution to update Adobe Flash and Mozilla, and they are both to the most recent version and it still crashes every time, no dent in the symptoms with the upgrades. I tried also downgrading to version 3, and it sill crashes. Although in some cases I can get around by saving the PDFs for reading them through Acrobat on my PC, it is a hassle as I do not want to save everything to my drive just to see what it is, plus sometimes forms are generated on a click and I cannot see these forms at all.
I had to migrate to Chrome as I needed the PDFs and could not wait any longer - any suggestions to make Mozilla work again would be appreciated.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode] after enabling only the PDF plugin in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Plugins'''. You can also '''Disable''' the PDF plugin and try an alternative, for eg. [https://addons.mozilla.org/en-US/firefox/addon/pdfjs/?src=cb-dl-created pdf.js]. Please also go through the add-on reviews, ratings, help and FAQ.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
[http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on Cannot Uninstall Add-on]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

I have songs both purchased online and downloaded from cd's that itunes is unable to locate. What can I do to get them back and make sure it doesn't happen again as this is the second time this has happened?

I have songs both purchased online and downloaded from cd's that itunes is unable to locate. What can I do to get them back and make sure it doesn't happen again as this is the second time this has happened?

Great, that's what I was looking for. Thanks for the quick response. I knew that that feature existed in this router, but I couldn't remember what it was called or where to find it.
The funny thing is, I recall distinctly setting up the DHCP reservation initially, but when I went to check it now, the reserved client list was empty. I have no idea how it could have become depopulated, thus opening the door for internal IP address reassignment of the Remote Desktop computer which led to the RDP ports no longer being forwarded to the right internal IP address and thus the failure of the Remote Desktop connectivity.

Which table contains both company code and Plant

HI,
Which table contains both company code and Plant?
which table contains Purchase requisition number and Company code?
Please help me.

plant and company code <b>marc</b>
MANDT     MANDT     CLNT     3     0     Client
MATNR     MATNR     CHAR     18     0     Material Number
WERKS     WERKS_D     CHAR     4     0     Plant
Purchase requisition number and Company code in <b>ekpo</b>
MANDT     MANDT     CLNT     3     0     Client
BANFN     BANFN     CHAR     10     0     Purchase requisition number
reward fi usefull

Making data in tables online and offline - Backup and Recovery

Hi All,
I'm working on a project where the functionality is similar to 'Backup and Recovery' for database tables.
Lets say we have a set of 6 tables T1, T2.... T6. They do have relationship between them. The tables in questions are simple standard tables, which are not table partitioned.
- I want remove the records from live tables based on user entered date ranges and store it in some offline medium.
- I might want make the data online again from the offline medium; Application should be able use that data without any modifications.
- Different offline mediums can be
a) Flat file
b) Different table space
c) Any other secondary medium (like XML, tape..Etc,)
The total number of records will run in millions.
The proposed solution should consider,
1. Performance - Java solutions not feasible. Anything in SQL, PL/SQL or runs in DB itself(tools) are OK.
2. Reliability - Should be highly reliable, Data corruption simply unacceptable.
3. Security - Users should not be able to make out of the file.
Few options include:
1. Use partition
2. Use SQL*Loader
3. Export and import of tables.
My main targets:
1. Reduce space.
2. Increase performance for queries.
Please pass on your suggestions, any help is highly appreciated!
Thanks In Advance!

Few points to note:
1. I agree partition would be right solution, but as I mentioned in my earlier statement, 'The tables in questions are simple standard tables, which are not table partitioned.'. The tables right now are not partitioned and I believe we cannot add/modify partitions, if the table were not created with the partition option. One work around is to build a partitioned table and copying all the properties(indexes,rows,constraints) from the existing non-partitioned table. But I suspect this is highly riskier and we can't afford to it.
2. I need to support Oracle database versions starting from 8.0.6.
3. Flat file is mandatory, others are optional. I can restrict our discussion just for a file.
4. Considering the above points, the only option I could think of is I can move the records from the table to flat file and remove from tables. When required rollback the file data to the table and application would be able to use it. For export/import few options are: SQL*loader, exp/imp utilities, PL/SQL file UTL packages
Thanks In Advance

Making data in tables online and offline - Backup/Recovery for tables.

Hi All,
I'm working on a project where the functionality is similar to 'Backup and Recovery' for database tables.
Lets say we have a set of 6 tables T1, T2.... T6. They do have relationship between them. The tables in questions are simple standard tables, which are not table partitioned.
- I want remove the records from live tables based on user entered date ranges and store it in some offline medium.
- I might want make the data online again from the offline medium; Application should be able use that data without any modifications.
- Different offline mediums can be
a) Flat file
b) Different table space
c) Any other secondary medium (like XML, tape..Etc,)
The total number of records will run in millions.
The proposed solution should consider,
1. Performance - Java solutions not feasible. Anything in SQL, PL/SQL or runs in DB itself(tools) are OK.
2. Reliability - Should be highly reliable, Data corruption simply unacceptable.
3. Security - Users should not be able to make out of the file.
Few options include:
1. Use partition
2. Use SQL*Loader
3. Export and import of tables.
My main targets:
1. Reduce space.
2. Increase performance for queries.
Please pass on your suggestions, any help is highly appreciated!
Thanks In Advance!

If you truely need to get the data out of the Oracle database into flat files, partitioning is pretty useless. Partitioning the table, though, strikes me as by far the most efficient, reliable, and secure solution.
What sort of security do you need with the flat file? Do you need the data in the file to be encrypted, or is the binary file format of an Oracle export file sufficiently obfuscated?
I'd stay away from UTL_FILE here, just because performance is rather poor.
I always get pretty nervous about recoverability when people start moving data out of the database to flat files for long-term archival.
- If you ever change the data model, even slightly, you may not be able to move the data back into the database without modifying your loader. A few years down the line, after a few data model changes, it can be almost impossible to find the documentation to make that change.
- If you do things like change lookup tables over time, reloading data can cause major problems. When you load the data back in, your applications and reports may not treat the old codes properly.
- Making sure that the flat files get stored and tagged properly can be a challenge. When the database gets moved to new system, you have to make sure that all the flat files also get moved around and the the loader scripts are modified appropriately.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Why do we need to code loop statement in both PBO and PAI in Table control

Hi friends,
i have 2 questions-
Q1-why do we need to code a loop and endloop statement in both PBO and PAI in Table control,sometimes even empty as well?
Q2-what r d dynpro keywords?

Hi,
It is required to pass information from internal table to table control so we loop it in PBO and to get the updated information back, we loop in PAI and update internal table content.
To get more knowledge on Table controls check these threads -
table control
Table Control
Hope this helps.
ashish

CRM online and MSA - correspondig tables in both modules

Similar Messages

Maybe you are looking for