CRM_ORDER_MISC 020 : Please report valid absence/attendance type

Hi,
When I am creating a serviceconfirmation in using crmd_order, I am getting an this error: CRM_ORDER_MISC 020.
An error has occurred in the system RSUCLNT070 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
Please report valid absence/attendance type for previous week records! (Notification W Z000CATS 011)
A master record for 423430/ORDT exists only in 2010 (Notification E KL 002)
I thought this could probably be because the time reporting was not done for the previous weeks when i was using old service orders to create confirmations. I have created new service orders and created new service confirmations but its till throws the same error.
Any idea how I can find the origin of this error. How is this error triggered?
Edited by: NeenaJ on Jan 4, 2012 3:39 PM

Hi Team,
I am also facing the same issue. Our CRM consultant is running a program to post a labour Cost.
We are getting below error msg :
Error
in system ECDCLNT120 while copying the document
  Message no. CRM_ORDER_MISC 020
Diagnosis
  Errors occurred while transferring the document into another system. To view the error
messages, see the enclosed log.
Transmission log
  The attendance/absence type 03/*      does not exist on 18.03.2014 (Notification E HRTIM00CATS 081)
Could you please help me on this?
Thanks & Regards,
Uttam

Similar Messages

  • Customizing error in absence/attendance type 01 0001

    Hi,
    I have any issue of Customizing error in absence/attendance type 01 0001 which running payroll. Pl suggest to reslove this issue.
    Regards,
    Patwari

    Hi,
    Check configuration of ur Absence/ attendence type 0001 under PSG 01. May be that is deleted or wrongly configured.or delete the absence type 0001 from it2001 and re-assign it for the particular employee.
    Try and confirm us.
    Nasim

  • Creation of attendance types

    Hi experts,
    How do i create an attendance types??? please help me with the whole process. Also please provide the paths for creation.
    when i assign attendances in PA30... it should display in the selection list.
    regards

    Hi Archana,
    Attendances are used to record the actual hours worked by an employee. 
    Define Attendance Types: In this step, you define attendance types for a personnel subarea grouping for attendance/absence types. It also describes how to determine the system reaction to attendances recorded for a day or a period when the employee has time off.
    IMG --> Time Management --> Time Data Recording and Administration --> Attendances/Actual Working Times --> Define Attendance Types.
    Rules for Attendance Counting (New): In this step, you determine rules for attendance counting using the new tables.
    IMG --> Time Management --> Time Data Recording and Administration --> Attendances/Actual Working Times --> Attendance counting --> Rules for Attendance counting (New) --> Assign Counting Rules to Attendance Types.
    Define Counting Classes for the Period Work Schedule: In this section, the settings for attendance/absence counting are made. Counting classes for PWS are used to evaluate absences& attendances. Use different counting classes for PWS. When you maintain a counting class you must define a separate rule for each Counting class.
    IMG --> Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Absence Counting --> Define Counting Classes for the Period Work Schedule.
    Define Absence Quota Types: In this step, the valid absence quota types (entitlement to time off and leave types) for the employee subgroup and personnel subarea groupings for time quota types are defined. We define Absence quota, because, in this we define unit of time measurement whether you want the entitlement to time off to be maintained in Hours or in Days.
    IMG --> Time Management --> Time Data Recording and Administration --> Managing Time Accounts Using Attendance/Absence Quotas --> Time Quota Types --> Define Absence Quota Types.
    If attendances are recorded in detail, you can assign the hours worked by a particular employee to specific orders or cost centers, and to maintain data on business trips, meeting. It is also possible to record all attendance times manually in the Attendances infotype (2002). You can evaluate them using the time evaluation report.
    I hope it will help you.
    Thanks,
    Padmaja.

  • Change behaviour of attendance type

    Hi guys,
    I have a question for you:
    - I have an attendance "9500 Extra Time", for overtime, introduced through IT 2002, which belongs to attendance type "O" (Overtime). When time schema is executed, attendances of this type are added to table TIP (6th time pair):
    Inizio   Fine     1  P  Cl  Ct  V  VR    CI   CF   V  O  I  PinI  PinF  PT    ALP  C1    AB  Numero
    00.0000  05.8833     0  01  00  -  0000                                                        5,8833
    05.8833  06.0000     1  01  00  P  0310  P10  P20     E                 0001                   0,1167
    06.0000  11.8333     1  02  00  P  0110  P10  P20     E                 0001                   5,8333
    11.8333  12.3333     1  02  00  P  0110  P10  P20     E                 0001                   0,5000
    12.3333  14.0000     1  02  00  P  0110  P10  P20     E                 0001                   1,6667
    14.0000  15.0000  0  3  01  00  O  0330               P                                        1,0000 <----
    14.0000  15.2500     1  01  00  P  0310  P10  P20     E                 0001                   1,2500
    15.2500  48.0000     0  01  00  -  0000                                                       32,7500
    But after that, when function "P2005" is processed, this time pair overwrites overlapped pair, and time pair type is changed to "M":
    Inizio   Fine     1  P  Cl  Ct  V  VR    CI   CF   V  O  I  PinI  PinF  PT    ALP  C1    AB  Numero
    00.0000  05.8833     0  01  00  -  0000                                                        5,8833
    05.8833  06.0000     1  01  00  P  0310  P10  P20     E                 0001                   0,1167
    06.0000  11.8333     1  02  00  P  0110  P10  P20     E                 0001                   5,8333
    11.8333  12.3333     1  02  00  P  0110  P10  P20     E                 0001                   0,5000
    12.3333  14.0000     1  02  00  P  0110  P10  P20     E                 0001                   1,6667
    14.0000  15.0000  0  3  01  00  M  0310               P                                        1,0000 <----
    15.0000  15.2500     1  01  00  P  0310  P10  P20     E                 0001                   0,2500
    15.2500  48.0000     0  01  00  -  0000                                                       32,7500
    As you can see, one hour of the time pair 14.00-15.25 is overwritten by the presence "9500 Extra Time" This is all rigth.
    But I have other attendance "9000 Formation", which belongs to attendance type "B". This is the table TIP just before "P2005" execution:
    Inizio   Fine     1  P  Cl  Ct  V  VR    CI   CF   V  O  I  PinI  PinF  PT    ALP  C1    AB  Numero
    00.0000  05.8833     0  01  00  -  0000                                                        5,8833
    05.8833  06.0000     1  01  00  P  0310  P10  P20     E                 0002                   0,1167
    06.0000  11.8333     1  02  00  P  0110  P10  P20     E                 0002                   5,8333
    11.8333  12.3333     1  02  00  P  0110  P10  P20     E                 0002                   0,5000
    12.3333  14.0000     1  02  00  P  0110  P10  P20     E                 0002                   1,6667
    14.0000  15.0000  0  3  01  00  B  0330               P                                        1,0000     <----
    14.0000  15.2500     1  01  00  P  0310  P10  P20     E                 0002                   1,2500
    15.2500  48.0000     0  01  00  -  0000                                                       32,7500
    And after "P2005" execution. There is not overwriting in this case:
    Inizio   Fine     1  P  Cl  Ct  V  VR    CI   CF   V  O  I  PinI  PinF  PT    ALP  C1    AB  Numero
    00.0000  05.8833     0  01  00  -  0000                                                        5,8833
    05.8833  06.0000     1  01  00  P  0310  P10  P20     E                 0002                   0,1167
    06.0000  11.8333     1  02  00  P  0110  P10  P20     E                 0002                   5,8333
    11.8333  12.3333     1  02  00  P  0110  P10  P20     E                 0002                   0,5000
    12.3333  14.0000     1  02  00  P  0110  P10  P20     E                 0002                   1,6667
    14.0000  15.0000  0  3  01  00  B  0330               P                                        1,0000 <----
    14.0000  15.2500     1  01  00  P  0310  P10  P20     E                 0002                   1,2500
    15.2500  48.0000     0  01  00  -  0000                                                       32,7500
    Note: Function P2005 is called without parameters and IT 2005 is empty for this date and employee, so nothing is transfered.
    OK, THIS IS MY QUESTION:
    I need attendance "Formation" to work as attendance "Extra Time". I'm not going to change Formation's attendance type (B), so I want to know how can I change the behaviour of absence type "B" so overlapped time pairs are overwritten as now actually happens with attendance type "O".
    I don't know where to change this, could you please help me?
    Thank you a lot.

    Hi Gurus,
    Thanks for the reply,
    I have change text through KL02,but when i enter again in KL02,the system shows:
    Act type  COAr  Short Text   Language  Valid from   to
    LABOR    9000   Labour        EN           1.4.07        31.3.99
    Hence it is still showing LOBOR but in short text it is coming as "LABOUR"
    Pl advise,how i can change "Act Type Col" and put Labour in said column.
    Regards,
    Samar

  • Training and Event Management - 2 Specify Attendance Types

    Hi
    Is it possible to assign 1 attendance types to each course type or an specific event.
    For example:
    There is a course that generates payed attendance and another course that generates non payed attendance. So to discriminate for the payroll we need to assign 2 different attendance type for each course type or for an specific event.
    Is this possible? Please answer us asap.
    Kind Regards,

    As far as i know,  settings for individual business events are made when you define the at BEtype of which there is none of the settings you require. One solution could be to remove time management integration for the ones that are unpaid and maintain them as unpaid absences:training. Hope someone else provides you with a more helpful response.

  • HOW TO Change behaviour of attendance type

    Hi guys,
    I have a question for you:
    - I have an attendance "9500 Extra Time", for overtime, introduced through IT 2002, which belongs to attendance type "O" (Overtime). When time schema is executed, attendances of this type are added to table TIP (6th time pair):
    Inizio   Fine     1  P  Cl  Ct  V  VR    CI   CF   V  O  I  PinI  PinF  PT    ALP  C1    AB  Numero
    00.0000  05.8833     0  01  00  -  0000                                                        5,8833
    05.8833  06.0000     1  01  00  P  0310  P10  P20     E                 0001                   0,1167
    06.0000  11.8333     1  02  00  P  0110  P10  P20     E                 0001                   5,8333
    11.8333  12.3333     1  02  00  P  0110  P10  P20     E                 0001                   0,5000
    12.3333  14.0000     1  02  00  P  0110  P10  P20     E                 0001                   1,6667
    14.0000  15.0000  0  3  01  00  O  0330               P                                        1,0000 <----
    14.0000  15.2500     1  01  00  P  0310  P10  P20     E                 0001                   1,2500
    15.2500  48.0000     0  01  00  -  0000                                                       32,7500
    But after that, when function "P2005" is processed, this time pair overwrites overlapped pair, and time pair type is changed to "M":
    Inizio   Fine     1  P  Cl  Ct  V  VR    CI   CF   V  O  I  PinI  PinF  PT    ALP  C1    AB  Numero
    00.0000  05.8833     0  01  00  -  0000                                                        5,8833
    05.8833  06.0000     1  01  00  P  0310  P10  P20     E                 0001                   0,1167
    06.0000  11.8333     1  02  00  P  0110  P10  P20     E                 0001                   5,8333
    11.8333  12.3333     1  02  00  P  0110  P10  P20     E                 0001                   0,5000
    12.3333  14.0000     1  02  00  P  0110  P10  P20     E                 0001                   1,6667
    14.0000  15.0000  0  3  01  00  M  0310               P                                        1,0000 <----
    15.0000  15.2500     1  01  00  P  0310  P10  P20     E                 0001                   0,2500
    15.2500  48.0000     0  01  00  -  0000                                                       32,7500
    As you can see, one hour of the time pair 14.00-15.25 is overwritten by the presence "9500 Extra Time" This is all rigth.
    But I have other attendance "9000 Formation", which belongs to attendance type "B". This is the table TIP just before "P2005" execution:
    Inizio   Fine     1  P  Cl  Ct  V  VR    CI   CF   V  O  I  PinI  PinF  PT    ALP  C1    AB  Numero
    00.0000  05.8833     0  01  00  -  0000                                                        5,8833
    05.8833  06.0000     1  01  00  P  0310  P10  P20     E                 0002                   0,1167
    06.0000  11.8333     1  02  00  P  0110  P10  P20     E                 0002                   5,8333
    11.8333  12.3333     1  02  00  P  0110  P10  P20     E                 0002                   0,5000
    12.3333  14.0000     1  02  00  P  0110  P10  P20     E                 0002                   1,6667
    14.0000  15.0000  0  3  01  00  B  0330               P                                        1,0000     <----
    14.0000  15.2500     1  01  00  P  0310  P10  P20     E                 0002                   1,2500
    15.2500  48.0000     0  01  00  -  0000                                                       32,7500
    And after "P2005" execution. There is not overwriting in this case:
    Inizio   Fine     1  P  Cl  Ct  V  VR    CI   CF   V  O  I  PinI  PinF  PT    ALP  C1    AB  Numero
    00.0000  05.8833     0  01  00  -  0000                                                        5,8833
    05.8833  06.0000     1  01  00  P  0310  P10  P20     E                 0002                   0,1167
    06.0000  11.8333     1  02  00  P  0110  P10  P20     E                 0002                   5,8333
    11.8333  12.3333     1  02  00  P  0110  P10  P20     E                 0002                   0,5000
    12.3333  14.0000     1  02  00  P  0110  P10  P20     E                 0002                   1,6667
    14.0000  15.0000  0  3  01  00  B  0330               P                                        1,0000 <----
    14.0000  15.2500     1  01  00  P  0310  P10  P20     E                 0002                   1,2500
    15.2500  48.0000     0  01  00  -  0000                                                       32,7500
    Note: Function P2005 is called without parameters and IT 2005 is empty for this date and employee, so nothing is transfered.
    OK, THIS IS MY QUESTION:
    I need attendance "Formation" to work as attendance "Extra Time". I'm not going to change Formation's attendance type (B), so I want to know how can I change the behaviour of absence type "B" so overlapped time pairs are overwritten as now actually happens with attendance type "O".
    I don't know where to change this, could you please help me?
    Thank you a lot.

    Try to use TextField1.access = "readOnly";
    Jasmin

  • Attendance type in time evaluation

    Hi All,
    Need solutions for the below issues.
    1) Clock in and clock out information for an employee is stored in SAP in IT2011, if clock in or clock out information is missing for an employee it should trigger a mail to employee and his manager.
    2) Currently using one attendance type : On duty would be raised by employee when is on business trip. System should consider this as working.
    During time evaluation it should consider if any attendance type and clock in and clock out details for an employee. and generate the absence quotas.
    There is no integration with payroll.
    3) If the accumulated earned leaves cross 90 days, rest of the leaves to be encashed, is there any standard sap solution for this or need to write a PCR or custom development to be done.
    Please let me know ho to do.
    Regards
    Vish

    1. The TD20 PCR in time schema evaluates time pairs and errors out if times are missing. The errors are stored in the FEHLER table. Maybe you can write a custom program to read this table and send messages.
    2. The On duty will be entered in IT2002 I guess. The positive TE schema will read both IT2011 and IT2002 and so should not be a problem.
    3. You need to write a PCR to accomplish this. There are useful doc on this forum. This doc by Vivek is very helpful:
    http://scn.sap.com/docs/DOC-55755
    Regards
    Pramod

  • Creating attendance types

    Hi folks,
    I am about to create 3 new attendance types: 1000 and 1001 should be processed in time evaluation and the other 1002 shouldn't be processed in time evaluation. I created them using the old attendance types and excluded the attendance type 1002 in a PCR in time evaluation. So far no problems, please suggest me what things I need to take care of and also any extra configuration I need to perform:
    All experts, please type in all ur suggestions or the problems u solved in creating attendance types: (it might help me in not doing the same mistake again)
    All suggesstions will be rewarded.
    Thanks
    SA.

    Hi SA,
    I never had to exclude an attendance but I guess I would delete the corresponding time pair in a PTIP rule (I guess it is what you did) taking care of the impact (example: the abs/attend standard flag generated in TE20)
    and/or I would check all functions/operations in the schema calling the attendance type (example in an ACTIO rule for seniority cumulation) to check the default value....
    I would also check outside time eval (reports, variants etc...) if it causes an impact on users
    hope this will give you ideas

  • Goods Receipt Report With 101 movement type using bapi_goodsmvt_create

    Dear Abapers,
            i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
    bapi_goodsmvt_create and data should upload through excel sheet.
    still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
    What are all the inputs i need to take and please give some valuable inputs to me.
    please do help ..... thanks for advance..
    Thanks & regards,
    Vinay.
    Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
    Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

    Dear Abapers,
            i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
    bapi_goodsmvt_create and data should upload through excel sheet.
    still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
    What are all the inputs i need to take and please give some valuable inputs to me.
    please do help ..... thanks for advance..
    Thanks & regards,
    Vinay.
    Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
    Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

  • Validation for Document Type

    Hi,
    I want make a validation for document type wise posting for particular users like user ABC only post JV doc.type document. Please suggest me how I will make it.
    Thanks & Regards,
    Hemant Kumar Maurya

    Hello Hemant,
    You can manage this with authorization or validation (T Code OB28 or GGB0), for validation:
    1 - Create a validation at document header level.
    2 - You can create a set (table BKPF and filed - user name) with T code u2013 GS01 wherein you can give list of users for which you want to restrict posting only with document type u201CJVu201D. Attached this set or a single user in u201CPrerequisiteu201D section of validation.
    3 - In u201CChecku201D section of validation validate the document type u201CJVu201D syntax u201CBKPF-BLART <> JVu2019
    4 - Create and attach error message for above validation.
    5 - Attach this validation to your company code in OB28
    Since i donu2019t have SAP log on credential therefore cannot give you exact validation code syntax.
    Please try, hopefully this would help.
    Regards,
    Parag

  • Validation for doc type for f-43

    Hi,
    I Have created a validation for document type sk for t.code f-43, while creating validation i have taken fb01 it is working fine for f-43 at the same time which is working for f-02 also it should not work for f-02.what to do please help me
    Thanks and Regards
      Radha

    Hi,
    Almost all FI transactions other than the clearing transactions, may apparently have different names like F-02, F-43 etc, but at the backend there is only one mother transaction code FB01.  So any validation on FB01 will impact all FI t-codes.
    I would suggest that you use document type in the validation, if you can have clear demarcation between the doc type used for different transactions.
    Cheers.

  • Validation for Document type in Vendor Invoice.

    Dear All,
    I need to restrict the user from posting vendor invoice other than document type KR. I thought of using validation with account type and posting key , but looking at more refined solution. Please suggest.
    Thanks & Regards

    Hi,
    Yes, this can be acheived using an validation at accounting document level.
    Validation must be like
    If posting key is 31---Prerequisite: BSEG-BSCHL = '31'
    then the doc type type should be KR---Check: BKPF-BLART = 'KR'
    Else put one error message.
    This will resolve your issue.
    Thanks,
    Srinu

  • SOA Mediator - javax.xml.soap.SOAPException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html

    I am using SOA Mediator 11.1.1.7(11g) and while invoking a thrid party web service API I get the following error. Please help me fix this issue.
    ORAMED-03302:[Exception in oneway execution]Unexpected exception in one-way operation "execute" on reference "AppvOffclJMSInAdapter_Exist_RS.AppvOffclJMSInAdapter_Exist_RS".Possible Fix:Check whether the reference service is properly configured and running or look at exception for analyzing the reason or contact Oracle Support Services. Cause:Unable to invoke endpoint URI "https://stripesqa.doe.gov/headergeneric/HeaderGeneric/HeaderGeneric.asmx" successfully due to: javax.xml.soap.SOAPException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html
    Thanks,
    Veda

    user9055538 wrote:
    i test the soa webservcies in a browserHi,
    It would help if you could give us more details...
    What type of soa webservices are we talking about here (JAX-RPC/BPEL/OSB)?
    And how exactly are you testing your soa webservices in a browser (EM)?
    A valid SOAP will have content-type: text/xml
    You may be pointing to a invalid endpoint or you may have an authentication/authorisation problem, so you are receiving html instead of soap...
    Cheers,
    Vlad

  • Attendance type for training in negative time management

    Hi,
    We are using negative time management. Attendance Type T-Training is created. I have specified in the integration switch PLOGI-TIME 1 and specified the attendance type in SEMIN-APART. But even when I firmly book a business event, the attendance type is not stored in the attendances of the employees who are booked to the training event.
    Is the attendance stored automatically when the business event is firmly booked in negative time management? Or this is applicable only to the Positive Time Management?
    Please help.
    Regards,
    Sasi.

    Hi Dear,
    In  "Specify Attendance Types" node under Integration with Time mgmt in TEM node in SPRO. Kindly check the following points:
    PLOGI,,TIME,,1,,Integration switch: Training and Event Mgmt/ Time
    SEMIN     AINST     "value as maintained in Time Managment" for Attendance type for instructor in T554S
    SEMIN     APART   "value as maintained in Time Managment" for Attendance type for instructor in T554S
    SEMIN     TIMEP    According to your requirement
    kindly check the value for the above two field under
    Time Management --> Time Data recording and Administration --> Attendance/Actual Working Time --> Define Attendance Type
    and check the value maintained Trainee Attendance and Trainer Attendance. Following is maintained as default.
    01     0420     Trainee Attendance
    01     0425     Trainer Attendance
    let me know if you have any issues.
    Thanks and Best Regards
    Puneet

  • CRM_ORDER_MISC 020 - Text for sales document is missing

    Hi Experts,
    While replicating from CRM-OLTP the follwing error
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occured while transferring the document into another system.
    Transmission log
    Text for sales document type ZNOR is missing in language EN (Notification E V1 119)
    Sales document 0050000062 was not changed (Notification E V4 219)
    Kindly guide me!
    Tks in advance,
    Nivea

    We get this type of error when the data that is send to R/3 is not revalnt for R/3. In your case the text id may not exist in R/3. Pls check you config.

Maybe you are looking for

  • LCD Brightness, sony_acpi from aur won't build

    I'm using a Sony VAIO vgn-sz430n, and the Fn keys won't work to change the brightness. I'm not so concerned about the Fn keys, for I've seen tons of documentation to get those working with xbindkeys, xmonad, openbox, etc. and I will worry about that

  • HT1766 How do I recover pictures and videos not backed up, nor in icloud

    I recently bought an iphone 4s and had them transfer my information from the old device to the new one.  Later I noticed that all the pictures had been transfered from itunes album covers to my camera roll in doubles also, I went home and ignorantly

  • Mac suddenly became very slow on OS-X

    Problem description: Machine became suddenly very slow only on OS-X. Checked with Linux and works ok. Detailed description: On December 31th machine begun to behave abnormally slow.  Long waits between keystrokes and the character appearance on the s

  • FCP Studio & Snow leopard

    I have the original Final Cut Studio (Version 1.0.1) that I bought when I had a G5 powerpc iMac. I have since upgraded to an Intel iMac, and just installed Snow Leopard. Motion wouldn't launch at all, so I uninstalled the entire suite with FCS Remove

  • How much free space will be left after import ?

    Hallo. I need to replace all schemas on integration server using those on production server. I want to know how much free space will be left on /data at integration server after this kind of refresh. Both databases are Oracle 9 so I will use exp/imp.