CRM ORg Modle Replication

Dear Friends,
Can any1 give me clarrification please??
Do we have to make some settings to be able to replicate Org model?? I see some customising steps bleow but i don get why and when they have to be used....
Enhanced Back end Integration version of CRM Model
standard back end integration version....
and also Convert org Model to represent R/3 multiple assignment
copying r/3 sales structure
Can any1 please explain me??? thank you so much !
Best regards,
Lata.
[email protected]

Hi!
1º) The first think is to decide if you need the multiple assignment in your CRM system, in the sense of that the same organization can be assigned to different organization units. You run this customizing (Convert Org. Model to Represent R/3 Multiple Assignments) if you are using an R/3 backend system where multiple assignments are already maintained in your R/3 sales structure.
Otherwise, the system by default has the standard backend integration version, where multiple assignments cannot be displayed.
2º) Copy the R/3 structure into your CRM with option "Copy R/3 Sales Structure"
3º) a third important step is to ensure that the buffering for your scenarios (SALES/SERVICE) are switched ON in table T77OMATTR.
4º) Finally, report HRBCI_ATTRIBUTES_BUFFER_UPDATE has to be executed on a
regular basis, mainly after the first R/3 structure and every time you make a change in the R/3 structure----> see documentation of this report
I hope this information can be useful for you!

Similar Messages

Replicating CRM org number ranges to ECC issue

Hi,
After saving the sales order in CRM system, I'm getting an error message that the number range of
the CRM org unit is not defined in ECC.
Can I get customization help with this replication issue please .
Points will be given
Many Thanks
Deepak

Hi Deepak,
Have you downloaded R/3 sales area(ie,. org + distribution Channel+division) to CRM? If you are not using standalone CRM scenario, then you have to maintain R/3 sales area in and then download it into CRM through customizing adapter object dnl_cust_s_area.
Then you have assign R/3 sales org to ur created organization in CRM and define distribution channel and division in the attribute tab of ppoma_crm.
Kindly check have u done all the above mentioned steps?
Thanks & Regards,
Anirban

Mapping SAP CRM Org model to ecc Enterprise structure

Hi
SAP gurus,
I am looking for some step wise guideline for conversation of SAP CRM org model to sap ecc, I want to do the mapping. Can any one please help for required steps.
and one more thing is I tried to do this by "Convert Org. Model to Represent Multiple Assignments in SAP ECC" option in crm 5.0 but i failed, some error happened, so how can I revert back to crm org model.??
Please help, I really need this.
Thanks
Rahul

{I am looking for some step wise guideline for conversation of SAP CRM org model to sap ecc, I want to do the mapping}
I think it's not possible
{so how can I revert back to crm org model.}
Not. Please read documentation.

GRC - CRM Org.Update

Hi All,
I want to update BP employee master data using GRC. Is this supported by GRC? Experts please share your opinion.
Requirement:
Whenever a new user is created, update this User's sap UserID into BP master data through GRC. Can GRC be used for this kind of update?
How is the HR org structure assignment request working with GRC? Can i use it for fetching CRM org structure and update it using this MSMP process ID (SAP_GRAC_ACCESS_REQUEST_HR) ?
Can i use Organizational assignment request in SAP GRC to update the org.structure in my CRM system? Will that work? As i can see in the template used for org.assignment request below are the attributes mentioned. Is this role mentioned in this template is a business role tagged to a position in CRM? or Is this different?
Please share your thoughts.
Regards,
Madhu.

Hi Claudio,
Thanks for the details.
We have a org.structure defined in our system.
We have PFCG roles created for each position in org.structure.
Now can i assign my PFCG role to position in my org.structure? How does this actually work? How does GRC connect and update the org.structure?
We are using SAP transportation management (TM) system.
Is this request type "Organizational Assignment Request" applicable for only HR system?
Any guidance or documents to understand the concept of organizational assignment request will be very helpful.
Thanks & Regards,
Madhu.

CRM Org Structure download

Hello Experts,
Our business team would like to verify the information in CRM Org Model to see if all the users, groups, … etc. been assigned to the correct model?
With transaction CRM_PPOMA, we could look for each one. If we pull entire company, it is very difficult to verify on the screen.
Hence, we would like to know if there is a way to pull these information into a flat file or spread sheet to verify the information we have. Or could you please tell which are the tables contain these information.
Regards,
Akash

Hello Akash,
In SE16 or by a report you can download any table or view into Excel. So as HRP stores the relationships you could filter them by excluding users and positions if you want and download them to Excel. Even better look for the table with the descritpion of the orgunits (which I don't know at the moment but which can be found out) and make a view where you join and filter the tables and do the same. Or if you want to do sophisticated changes wirte a report, make an SQL-statement based on HRP1001 and give out a list which you export.
Best regards,
Thomas

Getting CRM Org unit by the R/3 sales org/office/group

Hello everyone,
We have a need to get CRM Org unit ID by R/3 sales org/office/group as maintained in
transaction PPOMA_CRM.
Does anyone knows a function/table that gives this mapping ?
Thanks,
Nitzan.

Hi Nitzan,
Try it with this static methods of class CL_CRM_ORGMAN_SERVICES:
-- From CRM ID to R3 ID
MAP_HROBJECT_TO_R3_SALES_GRP
MAP_HROBJECT_TO_R3_SALES_OFF
MAP_HROBJECT_TO_R3_SALES_ORG
-- From R3 ID to CRM ID
MAP_R3_SALES_GRP_TO_HROBJECT
MAP_R3_SALES_OFF_TO_HROBJECT
MAP_R3_SALES_ORG_TO_HROBJECT
Kind regards,
Garcia

CRM Org Model vs. Roles

Does anyone know the difference between creating and providing security through CRM CIC Org. Model versus handling the security through Roles

Hello Mukund,
You can execute transaction CRMC_R3_ORG_GENERATE to download the R/3 sales areas into CRM.
Only new sales organizations are downloaded with CRMC_R3_ORG_GENERATE when is executed a second time, therefore is highly recomended to execute this transaction once. You can see it in the documentation of this transaction: IMG: CRM > master data > orga. management > data transfer >Copy R/3 Sales Structure.
The download from R/3 into CRM is supposed to be one-time download and all the maintanence should be done in both systems separately.
If you have already created organizational data seperated in CRM and ECC, therefore here there are just two options: either make all necessary assignments manually in PPOMA_CRM, or delete the CRM Org Model completely and rerun a new initial load with the above mentioned transaction.
To maintain the sales organization data manually in ppoma_crm, you need to go to the organizational unit's 'Function' tab, enter the corresponding R/3 sales organization there.
As for the distribution channel and division, they should be maintained in the 'Attributes'.
Hope the above information could be helpful.
Best regards,
Maggie

Is it possible to use distribution channel to define my CRM org structure?

hi,
Is it possible to use distribution channel to define my CRM org structure?
Regards,
babu

HI babu,
uIn this scenorio first u can create distribution channel according to client requirement and in the same way u can assign to u r orgstructure
Thnaks&regards
kishore kumar

CRM ORG Model Setup

Hi Gurus,
We have setup the Org Model in sync with R/3 in our Dev Client.
CRM => O 050000001 /20/00 (Sales Org/ Distribution Channel/ Division)
Corresponding R/3=> USAO/20/00 (Sales Org/ DChannel/ Division)
How do we transport it to Quality Client of CRM?
Do I have to setup the entire Org Model Again?
If any documentation/ Steps are available then it will be of gr8 help
Thanks
Mukund

Hello Mukund,
You can execute transaction CRMC_R3_ORG_GENERATE to download the R/3 sales areas into CRM.
Only new sales organizations are downloaded with CRMC_R3_ORG_GENERATE when is executed a second time, therefore is highly recomended to execute this transaction once. You can see it in the documentation of this transaction: IMG: CRM > master data > orga. management > data transfer >Copy R/3 Sales Structure.
The download from R/3 into CRM is supposed to be one-time download and all the maintanence should be done in both systems separately.
If you have already created organizational data seperated in CRM and ECC, therefore here there are just two options: either make all necessary assignments manually in PPOMA_CRM, or delete the CRM Org Model completely and rerun a new initial load with the above mentioned transaction.
To maintain the sales organization data manually in ppoma_crm, you need to go to the organizational unit's 'Function' tab, enter the corresponding R/3 sales organization there.
As for the distribution channel and division, they should be maintained in the 'Attributes'.
Hope the above information could be helpful.
Best regards,
Maggie

No Range for CP in SRM 7.0 in case of ECC HR Org Structure replication

Hi Experts,
We have SRM 7.0 , in case of ECC HR Org Structure replication, where we maintan the No Range for CP ( Employee replicated from ECC) in SRM ..I belive it is External ( In ECC it is at PA04 for Employee )?
Thanks
NAP

You need to schedule program RHALENI in Insert mode to achieve the same
Thanks,
Sundeep

HR Org Unit replication ? :-(

Hi guys,
I think I saw on the srm 4.0 manual a note about HR Org Unit replication. I searched that in my manual 4 times but I cant find it =(
Could anybody share that note ?
Thank you !!! =)
Regards,
Diego

Hello Diego,
you may also consider this document
<a href="http://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700004062262004E">Transporting SAP EBP Systems</a>.
Do not be fooled with the name of the document.
Gordan

HR org structure replication to SRM

Hi All,
we have done HR org structure replication to SRM, and we found that ORG structure replicated successfully in SRM . We can see it in PPOSA. But we found that Business partner number and Central person is not created for this.
I have followed steps given in this link.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
When I check IDOC it is posted successfully, when I check segments in IDOC in SRM it is showing personal number of HR, but it is not converted to Bussinesspartner and central person.
Any pointers
Thanks and Regards,
Abdul Raheem

Issue is resolved by SAP, some customizing entries are missed from ECC side

About CRM Org Model

Hi all,
I need some clear explanations about "<b>enhanced backend integration version of the CRM organizational model</b>" because I don't understand the SAP HELP explanations.
COuld anyone help me please?
Thanks in advance
Javier

Hi Javier,
1. There are 2 version in CRM Org Model.
a) SBIV (Standard Backend Integration Version)
b) EBIV (Enhanced Backend Integration Version)
2. EBIV is used to handle <b>multiple assignments</b> in CRM system.
3. As you know we have 3 Org Units as far as Sales is concerned i.e. Sales Org, Sales Office, Sales Group.
4. In R/3 there is a standard way to maintain multiple assignments among these org units.
Ex: Sales Group 'X' works (assigned) for 2 Sales Offices 'North' and 'South' simultaneously.
5. But in CRM this assignment is not as common as in R/3 and is not supported thru SBIV.
6. If you would like to have these multiple assignments made in R/3 available in CRM as well you may want to go thru EBIV.
7. Once you run EBIV you cannot go back to SBIV.
8. In EBIV divisions and distribution channels can only be assigned to sales units (sales organizations, sales offices, and sales groups). If they are assigned to any other neutral Org Units (Org Units without any Org Attributes), those assignments would be deleted once you shift from SBIV to EBIV.
Hope this helps.
Thanks.
Ajay Kiran

Org Unit replication ECC to CRM

Hi Experts,
Here is the issue:
A Sales order is created in ECC and replicated to CRM. Based on this SO, we need to create returns in CRM. Now the SO is replicated to CRM with errors. So in CRM, error says: Org Unit is not determined.
Sales Org, Dist.Ch and Div is replicated but Org Unit is not replicated as there is no Org Unit concept in ECC.
Now how do I get out of this error in CRM Sales Order doc?
Checked in Org Management in CRM. There is no Org Unit existing for that Sales Org which is determined. So how do I make CRM SO error free. Any thoughts from experts would greatly be appreciated.
Thanks,
John

An organzation unit is simply what it means, which is logical representation of some business entity or department. In CRM an organization unit can refer to a sales or service organization and has an attribute assigned to it, that designates what it represents.
We typically call a organization unit that has the following attributes maintained a sales area:
Sales Org
Distribution Channel
Division
The function tab of the organizational unit is where I assign the corresponding R/3 sales area. We then use the attributes tab in scenario sales to assign the remaining data. This data usually is the allow division and distribution channels, along with the corresponding "tupels". The tupel is the combination of the distribution channel and division.
You also need to mark the the object as permitted in determination, in order for it to be used in transactional processing.
Take care,
Stephen

Org Model replication

Dear Colleagues,
I replicated the Org model using transaction crmc_r3_org_generate --> selected all the required entries and generated. Cross check all the entries and they are transferred to CRM. After that I replicated Customer_Main and Customer_rel.
This was 10 days back, today I realized that I missed one sales org entry during model replication.
So went again to TR crmc_r3_org_generate -> selected that entry and try to generated. But it is showing 'genberated' column as RED.
Now how do I regenerate that entry. Any help...
Regards
Milind

crmc_r3_org_generate can be used only once.
Subsequent entries have to be created on CRM manually.
Regards,
Piyush

CRM ORg Modle Replication

Similar Messages

Maybe you are looking for