CRM Production was stoped suddenly and ECC orders to replicate in CRM

Dear Experts,
Greetings!!!.
Recently Because of Hardware Migration, CRM Production was stoped suddenly. and the orders are raised in ECC. directly.
Eg: in CRM YOR1 sales order for same they have created ZOR1 in ECC and are working. now i need to replicatie the orders which are created in ECC .
What will be the Customising settings and Middleware settings for the Same please guide us.
Thanking you in anticipation,
Regards,
Sany.

You must maintain on R/3 system the table CRMPAROLTP (in SM30). Set the following parameters:
Parameter name 1: CRM_SCENARIO
Parameter name 2: INT_CHANGE_ORDER (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Parameter name 3: ZOR1
Parameter value 1: A (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
And on CRM side you must maintain the same parameters in table SMOFPARSFA:
Key : R3A_SALES
Parameter name 1: INT_CHANGE_ORDER (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Parameter name 2: ZOR1
Parameter value 1: A (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Ensure that the scenarios are maintained consistently in both systems (CRMPAROLTP and SMOFPARSFA) to avoid errors.
Regards.

Similar Messages

As i was using my itouch(2nd gen)there was a sudden and drastic increase in temperature on the rear portion(metal portion) and since then it is not working.Has anyone come across a similar problem?Any Suggestions?

As i was using my itouch(2nd gen)there was a sudden and drastic increase in temperature on the rear portion(metal portion) and since then it is not working.Has anyone come across a similar problem?Any Suggestions?

Sounds to me like the battery has failed.
You can take it to an Apple Store. They MAY be able to do something.. Or, you can find parts and "How-To" repair guides on the internet. eBay and Google are your friends...

Error: crm production is not sync with ecc production

Hi Middleware Experts,
I am facing one issue, "CRM Production is not sync with ECC production". I have searched alot but couldn't find any relevant material. Please let me know the steps to rectify this error.
Thanks,
Vsh

Hello,
Sorry forget the last note I suggest you,
Please check the following links might be helpful
http://help.sap.com/saphelp_crm70/helpdata/EN/28/370123814711d3ad6b0000e8a5bd28/frameset.htm
http://help.sap.com/saphelp_crm70/helpdata/EN/46/57605601a208e7e10000000a114a6b/frameset.htm
thanks
Willie
Edited by: Willie Musa on Jul 6, 2011 10:43 AM

Drag & relate facility between srm 4.0 ( was 6.4) and ecc 5.0?

Hi all,
Whether it is possible to develope D&R functionality between between srm 4.0 ( was 6.4) and ecc 5.0?
thanking you
Rajendra

Please take a look at this link.
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/02b2b4de384af8ae759e55738296f7/frameset.htm

Line item deletion in ECC order not reflecting in CRM

Hi all,
1) I created an order in ECC with L1 and L2 line items.
2) After successful replication to CRM, i deleted the line item L1 in ECC va02 and saved.
3) Then checked CRM order(ensured that there are no replication errors and stuck entries in queues)
4) L1 in CRM system is not deleted.
Is this a standard functionality or can this be controlled anywhere. I know that if an order is created in CRM and distributed to ECC, we can't delete that line item in CRM. But in the reverse case even, is it the same??
Please help me out.
Regards,
Rajesh

Hi Rajesh
Did you check Delta load is active for sales document in R3AC4, if it is your source system is ECC when you do changes in the sales order in the ECC system, it should replicate to CRM
yes, this is a standard functionality as you said, when order is created in CRM and distributed to ECC you can't do any changes in ECC and even vice versa.
but you can do changes either or side provided you need to apply this note:888665
Regards
RAO

Error while entering product in Transactions- Opportunity and sales orders

Hello Friends,
I am facing a problem while entering products in Create opportunity screen with message no: COM_PRODUCT_SETTINGS001. I get the error as below.
Product ID is longer than the Customizing setting allows
     Message no. COM_PRODUCT_SETTINGS001
Diagnosis:
    The product ID 000000000000003115 contains more than 18 characters, that
    is, it is longer than the length defined in Customizing.
I tried changing the "Product output format and storage form" to maximum of 40 characters and tested it, the error still persists.
Though I created some opportunities with same product ids before, I only face this issue after system has been updated with some latest patches. Is this issue anything to with updated patches?
Appreciate your help on this.
Regards,
Suresh

Hi Harshit,
Thanks for the Relpy.
I did search relevant notes, but could not find anything related to CRM 7.0 version.
Regards,
Suresh

IPC/VC: Knowledgebase/KB of ECC is not shown in CRM

Hi,
we would like to use the Variant Configuration in CRM.
Today we are using already the IPC in a standalone environment with an external system (IPC 5.0, the external system is using the IPC in the Java environment of ERP). From the same ECC System we would like to download now the knowledge bases to reuse them in CRM 7.0. All knowledge bases and runtime environments are already available. When I download the object SCE (with certain filters), I can see all those entries in table COMM_CFGKB in CRM.
Anyhow, when checking the material in CRM (e.g. commpr01 or WebUI), no knowledge base is shown!
The table COMM_CFGKB has exactly the same entries as ECC (Active = T, KB Usage 10, KBOBJNAME and Version filled etc.), but anyhow it is not shown at all in CRM. As these knowledge bases are very huge, I have tested also a very small and easy one. This one is getting downloaded the same way and has the same entries in table COMM_CFGKB and it is also visible in commpr01.
So my assumption is that the other KBs are not 100% correct. When checking them in ECC (cu36) I get many warnings and errors. Anyhow, they were downloaded to CRM (but won`t be shown). Business says that these warnings/errors are OK and that the external system which uses the IPC in ECC is not having any problems.
Question: is there any chance of using a KB in CRM which has warning/errors when it was generated in ECC?
Is there any chance of manipulating the KB before it gets imported into CRM. I have found Note 1044682 which explains a BADI.
Which tables/fields do we have to manipulate so we are able to use the KB in CRM.
As mentioned: business is aware of those errors and excepts that there might be a crash in the IPC for certain combinations.
Thx
Guido

Hi Christophe,
OK, I think I understand your suggestion: you use the same IPC with your CRM as well as with the ECC system. So in CRM you just maintain the URL and a user in XCM to the "same" IPC. You mentioned that we need to download anyway the SCE. This is somehow logical as this is the base connected to CRM, but what is not clear to me is the fact, that if the SCE KB is used via ECC all SAP R/3 fields are available (like VBTYPE of the sales order where you have values like B or C). In CRM we use the same SCE KB but here these fields are not availble as the sales order transaction customizing in CRM does not contain such a field. Where is the logical link between the values which are available in IPC and the SCE?
Thx
Guido

Credit Management in CRM - transfer of blocked documents to ECC

Hi,
we want to implement credit check in CRM using CRM.
Our client requirements are:
- Sales order is created in CRM
- Credit check is executed in CRM, using information from ECC
- If result is negative, sales order credit status must be updated to "no Ok"
- User continue processing sales order in CRM until he decides it can be transferred to ECC
- Sales Order is transferred to ECC, where ECC users initiate credit release.
After reading Credit Management SAP documentation, we have an important doubt:
- If we want that ECC sends correct information about credit check, we need to have a "B" or "D" in column reaction in ECC.
- Documentation says that CRM can transfer a sales order with credit status to No Ok because it is not considered as an error
But if we have a B or D in ECC, it implies that ECC won't save a new document with credit check no ok. So if CRM sales order sends a slaes order that has been updated to "credit checK no Ok" by RFC user, it won't be transferred to ECC: Bdoc will error.
So, it seems as it was something that is not consistence
Does anybody can help me to clear this up?
Thanks and regards

Hi Sana,
Since CRM using R/3 credit check functions (thru RFC), have you
check that this credit check properly run in R/3?
You need to make sure this first.
Assume you already maintain RFC in CRM to call credit check function in R/3,
Then try to check whethere your transaction type for Service and Sales
already check / set the Credit Check is active?
Hope this could helps.
Gun.

Uploading Picture or image in to CRM Product

Hi to All,
I want to upload picture or image in to CRM product. what r the steps to get image in to CRM product.

Thanks for your replay
i attached same image in thumbnail image event hough i am not getting the picture the picture type i am using is .png type is any specific image type is there for attaching
it is showing an warning message "Contentdata for object 'BDS_POC22' not found"
Message was edited by:
Rama Rao
Message was edited by:
Rama Rao

CRM PRODUCT BAPI + TABLES

Hi,
Can any one help me or give me some clue from where we can find all the Product related BAPI's in the CRM ?
Also give me the names of the Product related Tables in CRM Data base.
Points will be rewarded for helpful answers.
Thanks,
Samantak.

Hi Ankan,
Thanks for your prompt reply. But it would of great help if you provide some details about the CRM Product related BAPI's and the type of BAPI's available.
I have to write BAPI Wrapper with the help of existing BAPI's.
Thanks in advance.
Samantak.

I'm trying to re-download a Acrobat XI Pro, which I had purchase 05/13/14 onto my computer, which was recently "cleaned' and had windows re-installed. When I go to my account to access the product, there is no record of any orders. My order number is AD

I'm trying to re-download a Acrobat XI Pro, which I had purchase 05/13/14 onto my computer, which was recently "cleaned' and had windows re-installed. When I go to my account to access the product, there is no record of any orders. My order number is AD012414282. Any suggestions?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maintain Structured Product in CRM and ECC

Dear expert,
For structured product, i have folowing questiones. Could you pls kindly help on it:
1) Structured product can be maintained in both CRM and ECC, right?
2) If i matain in CRM, how can i download it to ECC?
3)how to maintain it in ECC?
4)if i maintain it in ECC, how to download it to CRM?
Thanks!!
Hedy

Arun,
In CRM the sales organization is an organizational unit object that has an attribute that corresponds to the 4 digit sales organization code in ERP. This is also true for purchasing organizations which are organizational units that have ERP purchase org code as an attribute.
So to do this you need to translate the organizational unit number based on the attributes of that organizational unit(sales or purchasing).
Take care,
Stephen

Replicating Service contracts and Service orders from ECC 6.0 to CRM 2007

Hi CRM Gurus,
How can we replicate Service contracts and Service orders from ECC 6.0 and CRM 2007. Any pointers to do this?
Please let me know.
Best regards,
Vinay

Vinay,
I dont think you need any Middleware adaptor objects for CRM Request download .
You need to create a request in CRM using R3AR2 . Here you need to provide the R/3 table name and field name to download the service document along with Document ID
You can monitor your request download in txn R3AR4.
But as MCG rightly told , you should have done all requried customized settigns before downloading service documents .
Regards
Dinesh

I was recently burglarized and lost a bunch of Apple products. Is there a way to get receipts for items purchased with my apple id?

I was recently burglarized and lost a bunch of Apple products. Is there a way to get receipts for items purchased with my Apple ID?

Yes if you go to http://store.apple.com/ on the top right under the search it will say "Account" or your first name. You will click or tap that and you will click "check order status" sign in. After you do that in the middle by the order date and number it will say "print invoices" and as long as your item(s) have been ship you will be able to see and print your invoice receipts. you can view items purchased in the last 18 months.

SNP planned order availability date difference between APO and ECC

Hi,
I have observed that SNP Planned order availability date is not matching between APO and ECC. Details are as follows.
I ran SNP Optimizer with bucket offset of 0.5. After publishing the optimizer created planned orders to ECC, only start date is matching.
Example:
I am using PDS as a source of supply.
Fixed production activity in SNP PDS is 1 day.
GR processing time: 3 day
After running optimizer planned order is created with dates explained below.
Start date/time: 09.05.2011 00:00:00
End date/time: 12.05.2011 23:59:59
Availability date: 16.05.2011 00:00:00
Because of bucket offset defined as 0.5 optimizer planned order availability is start of next monday.
After publishing this planned order to ECC dates on the planned order is as follows.
Start date: 09.05.2011
End date: 09.05.2011
Availability date: 12.05.2011
I have not maintained any scheduling margin key in ECC. Also if I dont define the GR processing time, planned dates between APO and ECC always match. Can anyone explain the impact of GR time on the availability date.
Regards,
Venkat

Hi Venkadesh,
What's "state stamp"? Do you mean different time zone?
note : 645597 mentioned by Nandha is very helpful:
In standard, CCR will use duedate - "the available date of the output product".
Nandha's words "In SAP APO, if the receipt date of the primary product deviates from the
end date of the last activity of the order, the receipt date
always identifies this as inconsistent. You cannot rectify
inconsistencies of this type by using CCR."
I guess in your PDS or PPM, the output product is not assigned to the End of the last activity. Someone changed it?
Please CIF the PDS or PPM again.
If you really want to apply a note, please use note 815509 as you're using planned order,
and system will use order end date in CCR instead.
GR time is always considered. BR/Tiemin

CRM Production was stoped suddenly and ECC orders to replicate in CRM

Similar Messages

Maybe you are looking for