CRM R12.0.6 Map Type does not exist in the value set
Hi Everyone
When attempting to access Service Request Types in our CRM UAT Release 12.0.6 environment an error message appears referring to 'Value General for the flexfield segment does not exist in the value set'.
Checked the flexfields for the value set but did not set up a value for MAP_TYPES
Checked our PROD environment but no value set up as above.
Currently in progress of mapping service requests to responsibilites in UAT, could this be the cause and how to resolve? No mapping as yet for service requests set up in PROD. Has anyone else experienced this?
Thanks very much, Louise
Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Item Conversion to GMD YIELD TYPE does not exist for the item/items in this Recipe/Batch. Cannot
scale/create batch.
While auto shipping the above error i am getting. Please somebody help on this.
Thanks.Hi,
Could you please let us know which Oracle Product was installed and it complete 5 digit version.
Regards,
Prakash. -
Trip type does not exist in the system (T702G)
Hi,
In HR - Module - Travel Management.
I am trying to create a travel request for an employee.
i am getting the error message :
Statutory trip type does not exist in the system (T702G)
how to assign the trip type to a particular employee.
regards
samIf you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
there in the tri provision variant you need to enter the variant you have created.
Under that select the travel planning trip schema PL.
on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down. -
Value Misc. Allowance for the flexfield segment Expense Type does not exist
Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay SharmaCheck these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks -
ORA-29829: implementation type does not exist
Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
TimORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type. -
I am currently working on BI 7.0 .On trying to activate Source system and the system is giving me following error
<b>"Basic Type Does Not Exist"</b>
the source system is BI system(for transfer from ODS to Infocube).
Please provide path forward.Hi,
Seems like the ale ports and idoc aggreements are not ok within the source system setup. Rightclick on the source system and run the restore option. This will correct these errors for you. If this does not work check these:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken.
Message was edited by:
Patrick Rieken - BI-Formance B.V. -
The kind infoobject does not exist in the CMS
hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
the kind infoobject does not exist in the CMS
the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
then i found some error explanation
Cause
The InfoObject type does not exist in the CMS
Action
Ensure that the InfoObject type is propertly installed.
and
Cause
An InfoObject type is missing.
Action
Ensure that the XSD for this type of InfoObject is installed.
I want to know how to reinstall the infoObject type.
or any other idear on this.
thanks all.
AdaWHat's the exact version of the source and the target BO system?
Regards,
Sratos -
Hierarchy for material types does not exist
Hi,
I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
In the first level of configuration ai heve set up the logical systems and the system landscape.
when i am in R3AS
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
the above objects wre green when i executed
For the object MATERIAL
I am getting an error
Hierarchy for material types does not exist
Message no. COM_PRODUCT_API000
Diagnosis
Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
Procedure
Check whether the ERP system material types have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
Kindly guide meHi,
It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
http://service.sap.com/srm-inst
Regards,
Masa -
we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'
App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\). -
I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step. -
REP-52005: The specified key userlogin does not exist in the key map file.
Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
; OracleAS Reports Services ;
; CGICMD.DAT ;
; Example CGICMD.DAT Mapping file ;
; Syntax:
; KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case sensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
; 1. Parameter on command line to the reports servlet
; e.g. http://machine/servlet/rwservlet?KEY
; 2. Parameter on command line to a reports jsp
; e.g. http://machine/mydir/myreport.jsp?KEY
; 3. Within a reports jsp - in the rw:report custom tag
; e.g. <rw:report parameters="KEY">
; In addition to the Reports Server command line parameters, VALUE can include special parameters
; represented as "%X", where X identifies the parameter. Currently recognized special
; parameters:
; %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
; %* - entire contents (all arguments) of original rwservlet URL request.
; %D - request users to input database userid everytime they run the report.
; %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
; construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
; CGICMD.DAT Usage Notes
; 1. Multiple keys in this file MUST be separated by an EXTRA empty line.
; 2. Extra spaces are ignored. Multi-line entries allowed.
; 3. Lines starting with ";" character are treated as a comments.
; 4. Comments within a key or key value are NOT allowed.
; 5. NLS language support is provided and can be used (encoding should match the one
; used in HTML request - no language conversion of any kind is attempted.
; 6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
; The HTML format in the future may be mapped to the HTMLCSS format.
;;;;;;;;;;;; Example Key Entries
; Example 1: Run a simple breakb report and output to HTML
orqa: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 3: use %D to require user authentication every time
report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
; Example 4: Take all arguments from URL and send it to the reports server
run: %*
; Example 5: Run breakb report with HTML parameter form.
breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
; Example 6: take all URL arguments, and also generate a HTML parameter form
runp: %* %P
; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
;;;;;;;;;;;; Keys for Reports Demos
; Using default/in-process server.
; JSPs
;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
;charthyperlink_ids: userid=scott/tiger@ %*
;barcodeweb: userid=oe
;parmformjsp: userid=oe
;tutorial: userid=oe
; Paper Reports
;xmldata: userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
;barcodepaper: userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
;distributionpaper: userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
;pdfenhancements: userid=oe report=utf8test.rdf destype=cache desformat=pdf
userlogin : userid=SYMFINBTOTEST@fin10r21 %*
As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
Parsed Map File Entries
Return to Top
Key Name
Value
runp
%* %P
breakbparam
report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
report_defaultid
report=breakb.rdf destype=cache desformat=html server=repserver
run
report_secure
report=breakb.rdf destype=cache desformat=html server=repserver %D
express
report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
orqa
report=breakb.rdf destype=cache desformat=html server=repserver
Please help me to to make the key being populated here and being used by the reports server.
Thanks,
Priyauncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
--------------------------------------------------------------------------------- -
Source System Activation - IDOC Type does not exist
I'm doing a new installation of BI7 and when I want to activate the source system on replicate Metadata Box and select "Only Activate" it comes up with error stating :Basic Type ZSxxxxx does not exist
When I look in SE16 on table RSBASIDOC I can see the IDOC Type exist on both BW and R/3 Systems
Any solution?Check my reply
Re: "Basic Type Does Not Exist" -
Error : DB Mapping does not exist for the Host in iSetup
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
Thanks in advance,
Regards,
900076.900076 wrote:
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
Thanks,
Hussein -
Post Goods Issue - error : Class type does not exist - Message no. VK662
Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-SriSri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps.
Maybe you are looking for
-
PeopleSoft Canceled/Closed payments and Deleted Vouchers
We are implementing OBIA 7.9.6.3 for PeopleSoft Financials 9.0. On the AP side, we are seeing payment details (from PS_PYMNT_VCHR_XREF) for transactions that are Canceled and Closed showing up in the Outstanding amounts (Due/Overdue). Additionally, v
-
HP DV7-7201TX - Win 8 - Failure of System Recovery
I have a HP Dv7-7201TX running Win 8. When purchased it came with 6Gb RAM (1x 4Gb & 1x 2Gb) I replaced the 2Gb with a 8Gb module to give me 12Gb all up. This was fine however I started getting error messages about the Intel Rapid Start feature. So to
-
Hi- I am having a IDOC to File scenario, The scenario was working fine but all of a sudden i am unable to send the File out,i don't see any errors in the Monitor.But the file is not present in the file system.So i went to RWB and clicked on adapter m
-
Cheap alternative to apple's trashy ipod shuffle dock
I am gonna give a try on this. It is just a toonie (2 dollars) http://www.dealextreme.com/details.dx/sku.4349
-
I have searched support but only find answers like "wait a few days and the folders will return." I need all the standard folders back like "today", "yesterday", "last 7 days", etc. Thank you.