CRM Segment builder Showing zero records.

Hello Gurus,
Iam running a segment builder in CRM and the BI report comes with Zero records. The report is all fine in BI and it works 100%, is there anything iam missing on the CRM side.
Please advice.
Thanks,
Praveen

Hello,
I think you might be having some of the characters as mandatory in BI report. When you run the report from CRM, the report expects the value for mandatory fields. You can pass these values from CRM before creating filters in Segment Builder.
Right click on the Attribute and click on the Edit filter condition and check search help of Variable Name if any of the fields are mandatory then give the reqd values here.
Once you put the values then create the filter for attribute.
Hope this will work.
Rgds
Mallikarjun

Similar Messages

RSA7 shows zero records for delta upload of 2LIS_03_BF Datasource

Dear Professionals,
I am having constant issues with inventory management DataSource (2LIS_03_BF). I scheduled delta upload in r3 production using LBWE, keeping in mind that in LBWE there is no options for posting dates, ETC... In RSA3, there are records, but when i check RSA7, it is showing 0 records. What could be the problem. Do i need to do anything/activation anywhere in LBWE or RSA7 to see the records. Please advise.

Hi,
Normally there should be a collective run which transfers data from the application-specific queues to the BW delta queue (RSA7), just like this workflow:
MCEX03 queue==> RMBWV03 (Collective run job) ==> RSA7-Delta queue => BW
It is necessary to schedule the job control regularly - see point 3 of SAP Note 505700.
Check also these SAP Notes:
869628     Constant WAITUPDA in SMQ1 and performance optimization
728687     Delta queued: No data in RSA7
527481     tRFC or qRFC calls are not processed
739863    Repairing data in BW
Rgds,
Colum

PSA had delta records but while updating to DSO it shows zero records.

Hi all,
I have a delta info package which picks up the delta records. The data is successfully extracted from source system and updated in the PSA. But the no of records extracted to the DSO are zero. Couldnt understand what is the problem. Request your valuable inputs on this issue.

Inside the InfoPackage which you ran, click on the Monitor button or hit F6. In the next screen, open up the folder with the correct run date and select the node - on the right hand side of the screen, click on the tab named Details. Click on No to the subsequent dialog box. Here, open up the last node named "Processing (data packet)" then open up node named "Data Package". Open up all nodes under this one and you'll probably find that either there is a custom start/end routine in the Transfer Rules or in the Update Rules which is filtering out the records from the PSA from updating the target (Cube/ODS). One of these nodes will show you the exact count of how many records came into PSA and how many were passed on to the data target to update it and the reason behind it, for e.g. "Number of data records changed form 16 to 2 in start routine".
Hope this helps.
Cheers,
Sougata.

Infocube showing zero records...

Hello All,
I am loading data from flat file to ODS then to cube, after loading the data i can see the number of records transfered and added in the ods, but not in the infocube.
Please help...
Regards,
MC

Hi MC,
Please Make sure that the data load to ODS is successful, check the number of records added to the ODS.
If everything is fine with ODS , then
1. Check the details tab in RSMO, here you can see the status of records added.
2. Check the update rule of the InfoCube.
Then delete the request from the InfoCube by making total status to RED manually.
Then reset the datamart status of the ODS request then reschedule it.
Hope it helps...
Regards,
Zakirahamed SM

Aggregtaor Transformation without any condition showing zero records in target table

Hi Everyone, I have a source table which has 100 records,I just passing all the 100 records to aggregator transformation. In aggregator transformation i am not giving any condition,I just mapped from aggreator directy to target table.After running this mapping in target table i found 0 records in target table. why this happing can anyone explain this?

Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

CRM: using BW cubes in Segment Builder

Hello all,
I am trying to use BW Cubes as data sources in the CRM Segment Builder uisng transaction CRMD_MKTDS. For this purpose I set up RFC destinations and logical systems in both the BW and the CRM 5.0 system. In transaction SM59 the connection test works fine, as well as the remote login.
When I try to use the option "Business Warehouse Cube" in the data sources transaction and use the F4 help for the RFC destination, the system simply states "no values found".
Is there anything else I need to configure for this to work?
Thanks
Thomas

Dear Thomas,
Did this get solved?
Thank you,
-Vijay

Does Segment Builder compare only GUID?

Hi,
I'm working with a CRM 5.0 system. My problem is the following.
I want to create a Target Group containing BP with the following attributes:
Prog_id = PP
Date = 24.05.2010
The expected Target Group should contain 3 record, but I find 4 record in it.
For the "outsider one" I find in the table which contains 'Prog_id' and 'Date' fields the following records:
bp                        Prog_id              Date
0000227123          FF                    24.05.2010
0000227123          PP                    28.05.2010
I have this problem wether I use an InfoSet with Data Reading Program, or I use an Infoset with join.
I think that Segment Builder includes this record because it compares GUID only.
Could you please help me?
Is there anywhere something I should set?
Thaks in advance,
E.I.

...

Zero records in delta update

Dear All,
In HR :Time management (Time and Labour )(cube) 0PT_C01 two data sources are there and one is 0HR_PT_1 , during delta load it does not get any recors and it will show zero records at cube level and in r/3 rsa3 ir shows new records.Please suggest how to solve this issue.
Regards
Albaik

Hi,
This is because you havent run the init load till now.
We have to run a init load before running delta(one time process).
now as you have selected init with datatransfer, you got all the records transferred.
from next time, no need to run init and you can proceed with delta.
Cheers,
Srinath.

0PS_WBS_EVA (earned value) returns zero records

Hello,
I've activated the business content datasources for Project systems. I'm unable to get any records for earned values from R/3. The following datasources show zero records:
0PS_WBS_EVA
0PS_NWA_EVA
0PS_ORD_EVA
0PS_NAE_EVA
Can anyone tell me the tables to where these datasources are hitting? Help.SAP wasn't much of a help. I have already looked there.
Are there any settings within ECC that need to be changed in order to get data for the above datasources?
I'm getting data for the CO datasources related to project systems, such as 0CO_OM_WBS_6, 0CO_OM_OPA_6 and so on.
Due to zero records from the above datasources, there is no data coming in the Earned Values cube of Project systems.
Regards,
Sameer

Dear Oscar,
Thanks for your response,
The Actual Cost posted by our Functional Consultant is USD 250, but i am getting the Total Actual cost is ZERO (Sum of -250 +250) as i shown above.
the posted actual cost is +250, finally we need this figure only,
if i do restriction on Sender receiver Indicater field with S than i will get Actual Cost 250, but in SAP standard RKF for Actual Cost there is no restriction on Sender receiver Indicater field (S & H)
I hope you got my point now.
Thanks
Amar Reddy

TG shows Zero count in segment builder

In some cases i have seen when i create TG , it shows zero count. Sometimes it may be the case that filter select may not correspond. Can you suggest what other reasons could be?

Hi,
1.       This is an authorization issue. please add
2.       following values for authorization object S_TABU_DIS in your marketing profile.
3.       ACTVT <FLD> Activity 03
              DICBERCLS <FLD>   Authorization Group FC01, SA
Please try and I hope you the problem is solve.
best regards,
Jags

Purchasing Cube -- 0PUR_C01.. "Added record" is showing zero in request

When i try to load the data to this cube, my trasfer record is showing values while Added Record is showing zero values. Whats the problem. Please advise !!

Hi,
Check whether do you have defined the industry sector in R/3. This has to be done before filling the setup table. search the forums with note no 353042.
This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Regards,
Anil Kumar Sharma .P

Segment builder in CRM 2007

Hello all!
I have a short question concerning the segment builder in CRM 2007:
is there only the Java Applet version? Because some functions I have in the GUI Segment Builder are missing there...
So do the users have to live with the reduced functionality?
Thanks for your answers!
Regards Anne

Hi,
regarding the Flex-based Segment Builder: This information is not completely correct.
Yes, there is a Flex-based Segment Builder in CRM 7.0, but is only available for High Volume Segmentation which requires a TREX and provides only a subset of the functionality (e.g. no Product Segmentation, no Relationship Segmentation, only single Business Partners). For the complete Segmentation functionality, there is still the Java Applet in use in 7.0.
From CRM 7.0 EhP1 on the complete functionality will be merged in the Flex-based Segment Builder.
Regards
Sebastian Solzbacher

Segment builder,not showing results.

hi experts
While creating a campaign i assigned marketing attributes to business partner .its visible in the marketing tab page in the respective bp but in the segment builder its not showing results.

Hello,
have you added the marketing attributes as a data source to the Segment Builder using Transaciton Code CRMD_MKTDS?
Regards
Gregor

Segment builder does not start in CRM 7

Hello!
I'm trying to get the segment builder in the marketing scenario to work in CRM 7
It starts a java-applet, but I'm pretty sure it is suppose to start a flash variant instead....
We have barely any rights/privileges in Windows, could that cause the problem?
The java version on the PC's is 1.6.0_07-b06
I get no error messages in the logs in CRM.
I haven't found any good docs related to segment builder and if somebody has some good docs, pls let mer know where they are available!
Thanks and regards!
rollo

Hi Rollo!
Try the following steps:
1. Download the latest update at www.java.com
2. Check if the following services are activated:
- /default_host/sap/public/bc/icons
- /default_host/sap/public/bc/ur
- /default_host/sap/public/bsp/sap/system
- /default_host/sap/bc/bsp/sap/crm_ui_start
- /default_host/sap/bc/bsp/sap/crm_ui_frame
- /default_host/sap/bc/bsp/sap/crm_bsp_frame
- /default_host/sap/bc/bsp/sap/gsbirp
- /default_host/sap/bc/bsp/sap/thtmlb_scripts
- /default_host/sap/bc/bsp/sap/thtmlb_styles
- /default_host/sap/bc/bsp/sap/crm_thtmlb_util
- /default_host/sap/bc/bsp/sap/bspwd_basics
- /default_host/sap/bc/bsp/sap/bsp_wd_base
- /default_host/sap/bc/bsp/sap/crmcmp_hdr
- /default_host/sap/bc/bsp/sap/crmcmp_hdr_std
- /default_host/sap/bc/bsp/sap/uicmp_ltx
- /default_host/sap/bc/bsp/sap/bsp_dlc_frcmp
- All Services unter /default_host/sap/crm
4. Transaction /nSICF
Activate the following service
/default_host/sap/bc/bsp/sap/crm_mkttg_segap
I think, that will work.
Regards
Oliver

Campaign mgt segment builder in sap crm 7.0

Hi All,
In the segement builder, we need to have the feild employee responsibele and the industry code. Based on this two feilds and other criteria the filter can happen. They can create a target group based on this.
But when i check in the infoset for the BP, I find that the sales employee responsible is found. But i could not find the Industry code feild in the Infoset for BP.
This is the infoset where the Business partner data is maintained u201CCRM_MKTTG_BP_ORG_CDE u201C
How to create a segment builder based on the Employee responsibloe and based on the Industry code in the Graphical modeler. Please let me know if any other infoset contains this data.
I need to know where this feild employee responsibele and the industry code is there, in which infoset it is maintained
Please help me with the steps and configuration....
Regards,
karthik J
Edited by: Karthik J on Nov 1, 2011 7:08 PM
Edited by: Karthik J on Nov 3, 2011 12:20 AM

Hi Karthik,
I am not sure if there is a standard infoset which has the value of Industry and responsible salesrep.
But to achieve your requriement i would advice you to create a custom Infoset using the table CRMM_BUT_FRG0041 as it contains the information on industry sector and you will have to join this table with another table which contains the info on salesrep to create a custom infoset.
You can create custom infosets by joining multiple tables using tcode SQ02
rgrds,
Randhir Soni

CRM Segment builder Showing zero records.

Similar Messages

Maybe you are looking for