CRM  Service quality reports

Hi Forum,
I m in need of a quality report from the CRM service module, I have heard that we can get quality reports from the same.
Can anyone please indicate whether there are any standard quality reports that can be seen from CRM service implementation or all the above said reports can be taken out as an enhancement.
The requirement is urgent kindly share your experience.
Thanks,
Amit

Hi Julius,
Thanks got 3 reports but the major part is still left and the customer wants the reports to be developed...apart fromm the std ones
Hence still a long way to go. Thx anyways.
Amit

Similar Messages

  • A Quality report as a tool for the Quality management of Web services

    Hi everybody,
    I would like to explain and discuss my current research project with you:
    The differentiation from competitors is crucial for the economic success of a product. This differentiation can be achieved in addition to price and the date of the market entry through the product quality. To differentiate the quality of products, it is necessary to distinguish between several relevant product characteristics, to determine their values, to evaluate these values and to relate this evaluation to the evaluation of other products. Techniques for the determination of the quality of a product are used in many areas of the quality management, e.g. in the quality assessment.
    Web Services are software systems supporting a machine-machine interaction over a network. Web services are often used as modules in different software architectures, especially in Service-oriented architectures (SOA).
    In the course of quality management of a Web service applied in software consequently needs appropriate procedures and quality models as means to determine the quality. As there is a lack, research is needed in this field.
    In order to eliminate the described deficit, a procedure is to develop that helps to determine the quality of a Web service. A report is conceivable which integrates all relevant views, all influences on the quality and all phases of the life cycle of a Web services.
    During the research a lot of similarities between Life cycle assessments of environmental management and the quality management have been identified. These similarities include e.g. principles, procedures and the terminology. Since the Life cycle assessments relate on the product life cycle, on the stakeholders and on all relevant product characteristics, an adaption of the method on the quality management of software seems to be promising.

    I would like to answer the following two research questions:
    - Is it possible to adapt the principles and procedures of Life cycle assessment and Sustainability reporting to the quality management of Web services?
    - Is a quality report based on these findings an appropriate tool for quality management?
    Do you have any experiences with the quality management of Web services? Which procedures do you use to determine the quality of Web services? How are your experiences with that procedures? Where are their weaknesses?
    Edited by: Bastian Grabski on Jan 7, 2010 11:36 AM

  • CRM service reporting in BW

    Hi all,
    I have a question on CRM service reporting. I found a list of all CRM service reports in BW. However, in this list, nowhere the counters of the Ibases are taken into consideration.
    We would like to have a report where the counters (so the number of pages printed by a machine) and the number of service interventions are reported. Then we can calculate how many pages are printed till the next service intervention.
    Is there a standard report for this?
    regards,
    Wim

    Reporting on counters is not part of standard CRM reporting

  • Data Quality Services - Summary report

    Hi,
    Is anyone has a idea about which table is stored summary information comming out from Activity monitor?
    the example is below:
    when I exported the data  the summary as follows:
    My pourpose is to automate this report if it is stored on DQS data bases?
    Field
    Domain
    Corrected Values
    Suggested Values
    Completeness
    Accuracy
    EmployeeName
    EmpName
    5 (0.06%)
    0 (0%)
    7303 (88.73%)
    8222 (99.89%)
    EmployeeKey
    EmployeeKey
    1 (0.01%)
    0 (0%)
    8231 (100%)
    8215 (99.81%)
    CostCentreKey
    CostCentreKey
    0 (0%)
    0 (0%)
    8231 (100%)
    8141 (98.91%)
    CostGroupKey
    CostCentreGroupKey
    0 (0%)
    0 (0%)
    7188 (87.33%)
    7094 (86.19%)
    LeaveGroupKey
    LeaveGroupKey
    0 (0%)
    0 (0%)
    8231 (100%)
    8129 (98.76%)
    EmployeeStatusKey
    EmployeeStatusKey
    0 (0%)
    0 (0%)
    8231 (100%)
    8212 (99.77%)
    EmployeePositionNumber
    EmployeePositionNumber
    0 (0%)
    0 (0%)
    8214 (99.79%)
    8117 (98.61%)
    EmployeeEmail
    EmployeeEmail
    0 (0%)
    0 (0%)
    5133 (62.36%)
    8220 (99.87%)
    HoursPerWeek
    HoursPerWeek
    0 (0%)
    0 (0%)
    8214 (99.79%)
    8213 (99.78%)
    Gender
    Gender
    0 (0%)
    0 (0%)
    8231 (100%)
    8231 (100%)
    EmployeeEFT
    EmployeeEFT
    0 (0%)
    0 (0%)
    8214 (99.79%)
    8213 (99.78%)
    EmployeePostCode
    EmployeePostCode
    0 (0%)
    0 (0%)
    8153 (99.05%)
    8124 (98.7%)
    EmployeeSuburb
    EmployeeSuburb
    133 (1.62%)
    0 (0%)
    8152 (99.04%)
    8134 (98.82%)
    ReportToManager
    ReportToManager
    0 (0%)
    0 (0%)
    7037 (85.49%)
    7036 (85.48%)
    PositionClassificationCode
    PositionClassificationCode
    0 (0%)
    0 (0%)
    8144 (98.94%)
    8144 (98.94%)
    PositionClassificationDesc
    PositionClassificationDesc
    0 (0%)
    0 (0%)
    8144 (98.94%)
    8144 (98.94%)
    PositionLocation
    PositionLocation
    0 (0%)
    0 (0%)
    8214 (99.79%)
    8122 (98.68%)
    Age
    Age
    0 (0%)
    0 (0%)
    8231 (100%)
    8229 (99.98%)
    CurrentClassCode
    CurrentClassCode
    0 (0%)
    0 (0%)
    7908 (96.08%)
    7906 (96.05%)
    CurrentCLassDescription
    CurrentCLassDescription
    0 (0%)
    0 (0%)
    7908 (96.08%)
    7907 (96.06%)
    EmpState
    EmpState
    0 (0%)
    0 (0%)
    8153 (99.05%)
    8137 (98.86%)

    0
    Hi All,
    I have utilized the DQS for my organization Data Cleansing project. And we have built Data Quality reports using DQ output.
    We also use Profiler Summary report in the Activity Monitor, but this is manual process where Data owners need to manually enter into the Activity monitor and generet the porofiler report.
    My question is, which DQS table store the this Profiler summary report where by I can automate the report through that source.
    Here is the screenshot of the report we are looking at, we need to find out which DQS source table got this information.
    Thanks for the help

  • Data Quality Report Error

    In DS 12.1.1.0,
    when I try to open a Data Quality Report in the Management Console I get a new Windows with the following error message:
    Fehler
    Fehler bei der Seitenformatierung: FormulaFunction hat eine unerwartete Ausnahme von der 'evaluate'-Methode ausgelöst. 
    Tomcat log stdout says:
    19-05-09 10:58:59:708 - {ERROR} sdk.JRCCommunicationAdapter Thread [http-28080-Processor24];  JRCAgent5 detected an exception: Fehler bei der Seitenformatierung: FormulaFunction hat eine unerwartete Ausnahme von der 'evaluate'-Methode ausgelöst.
         at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
         at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
         at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
         at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
         at com.crystaldecisions.report.web.event.b2.a(Unknown Source)
         at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
         at com.crystaldecisions.report.web.event.av.a(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
         at org.apache.jsp.jsp.dqcrystalviewer_jsp._jspService(dqcrystalviewer_jsp.java:274)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
         at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
         at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
         at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at com.acta.webapp.mdreport.servlet.JSFilter.doFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
         at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
         at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
         at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
         at java.lang.Thread.run(Thread.java:595)
    Any idea how this can happen?
    Regards,
        Martin
    Edited by: Martin Bernhardt on May 19, 2009 11:03 AM

    Martin,
    can you try to change the Settings of your Internet Explorer:
    Tools --> Internet Options --> General/Appearance/Languages
    Add "English (United States) [en-US]" and move it to first place above the "German (Germany) [de]" entry?
    Niels

  • CRM RELATED BI REPORTS

    Hi,
    Please tell what are the standard BI Reports & infosets available for
    1.Marketing
    2.SALES
    3.SERVICE
    4.CIC
    Regards,
    Natasha P

    Hi,
    CRM Related BI Reports are as follows-
    Billing Documents          0TPLB_0BE_C01_Q0001_100
    Quotation Tracking          0TPLB_0CSAL_C05_Q0002_1
    Incoming Orders          0TPLB_0CSAL_C03_Q0001_1
    Open Contracts          0TPLB_0CSAL_C04_Q0003_1
    Activities by Category          0TPLB_0SAL_DS01_Q0005_1
    Lost Leads          0TPLB_MKTG_C01_Q0005_V01
    Opportunity Pipeline          0TPLB_0CRM_C04_Q0020_1
    Opportunity Win/Loss Analysis     0TPLB_0CRM_C04_Q010_1
    Activities: Success/Failure Analysis     0TPLB_0CSAL_C01_Q0015_1
    Activities, Opportunities, Sales Orders in My Sales Region  0TPLB_0CSALMC01_Q001_1
    Activity Partners With Open Activities     0TPLB_0CSAL_C01_Q0021_1
    Best Regards,
    Rajendra

  • SolMon 3.2, Difference between SolMon report and Service .sap report?

    Hi Guys,
    last week i found one strange thing, there are differences between the reports of our local SoMon server report  and report from service.sap (service message).
    why there will be difference like this, Please help me in this regards.
    Regards
    Srini

    Software Components for SAP Solution Manager 4.0 as of April 2007.
    SAP_BASIS 700           Basis Component
    SAP_ABA       700           Cross-Application Component
    PI_BASIS  2005_1_700     PI_BASIS 2005_1_700
    ST-PI     2005_1_700     SAP Solution Tools Plug-In
    SAP_BW    700           SAP NetWeaver BI 7.0
    SAP_AP    700             SAP Application Platform
    BBPCRM    500           BBPCRM
    CPRXRPM   400           SAP xRPM/cProjects/cFolders 4.00 (ABAP)
    ST        400           SAP Solution Manager Tool
    ST-A/PI       01I_CRM500    Application Servicetools for CRM 500
    ST-ICO       150_700       SAP Solution Manager Implementation Content
    ST-SER    700_2006_2    SAP Solution Manager Service Tools
    ST (Solution Manager Infrastructure, tx solution_manager, SOLAR01)
    ST-A/PI (Download modules to get data for service sessions, monitoring)
    ST-ICO  (Implementation Content - Business Process Repository)
    ST-SER  (Service Sessions as EarlyWatch Alert, SAP GoingLive Check, Setup System Monitoring, Central System Administration, Setup Business Process Monitoring, Service Level Reporting, ....)
    See also SAP Notes:
    - 707705 (www.service.sap.com/sap/support/notes/706705) for an explanation on Components for Messages (with lots of key words).
    - 394616 (www.service.sap.com/sap/support/notes/394616) Release strategy for SAP Solution Manager
    Best regards
    Ruediger

  • HP OfficeJet 6500A Printer Quality Report - PHA Drops Inquiry

    I just installed new HP Officejet 920XL cartridges (Magenta, Cyan, Yellow) in my Officejet 6500A.  I ran a Printer Quality Report from the printer menu after I installed the new cartridges.  I noticed from the report that the PHA Drops for the Magenta and the Cyan cartridges is substantially less than the PHA Drops for the Yellow cartridge.  I'm not sure what PHA Drops are but I would assume the number would be similar for all three cartridges since I just replaced them. Why would the Yellow number be substantially higher than the other two?   (Magenta - 4350627000, Cyan - 4507370000, Yellow - 5558569000)

    Hello jnedved,
    Welcome to the HP Support Forums! I see you ran a print quality report after changing your cartridges and you were interested in the PHA count. The PHA is the Printhead Assembly, and the count number is the printheads drop count since being installed. It does not reflect the drop count of the new cartridges. To get a better understanding of how ink is used, please take a look here: Ink Usage in Inkjet Printers.
    There could be many factors as to why the yellow PHA drop count is higher than the cyan and magenta cartridges including: ink used to service the printer, pages that you print (some may use more of one color than the others), ink evaporation, etc..
    Ink is used in a number of ways throughout the printing process, from preparing the printer to print to the actual printing of documents, photographs and other materials. HP designs its inkjet printer systems to deliver outstanding value in printing customer documents while using enough ink to maintain a reliable printing system that delivers outstanding print quality over the life of the printer.
    The PHA Drop count listed on the print quality reports are for warranty purposes only, I hope this helps!
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to get CRM service order data in R/3

    Hi,
    I want to retrieve service order data from CRM system to R/3, is there any FM for this. Please help as i am new to CRM
    Thanks
    Bobby

    Hi Bobby,
    It is very much possible to upload CRM service orders to SAP R/3 or SAP ECC via standard CRM middleware.
    Please refer to the below SAP help document for complete list of configuration activities for service order upload.
    http://help.sap.com/saphelp_crm50/helpdata/en/f0/5d583c65399965e10000000a114084/frameset.htm
    <b>Do not forget to reward if it helps</b>
    Regards,
    Paul Kondaveeti

  • Data quality report under management consol

    I am using BO DS 4. and trying to use the data quality report under management consol. For me these reports are getting generated for every run of the address cleanse Job.
    Is it possible to get a consolidated report for a day of the Job rather then for each run? If yes, please let me know how I can do that.

    Please respond, If any body has any clue on this

  • Regarding selection screen fields in Service PO Report

    Hello All,
       I have developed a Service PO Report with input parameters like Purch. Organisation, Material Group, Purchasing Group, Plant, PO No., Vendor, Activity, Entry Sheet No., GR No. I have used the tables ekko, ekpo, ekbe, essr, ml_esll, mseg and lfa1.
    When I input a particular Purch. Organisation,   I am able to get the output filtered by that Purch. Organisation. Similarly, when I input other fields individually, I get the filtered output based on the value of the fields that I inputted.
    The problem is that when I select only a particular GR No. in the selection screen, I am not able to get the filtered output for that particular GR No. Its showing all the unnecessary data for that particular GR No.
    Except this field, the report is running fine. So can anybody guide me in getting the filtered output based on GR No.?
    I have linked tables ekko, ekbe and mseg.

    I have pasted the code below for analysis.
    form fetch.
    select ek~ebeln
           ek~loekz
           ek~lifnr
           ek~ekorg
           ek~ekgrp
           ek~bedat
           ek~bukrs
           ep~ebelp
           ep~txz01
           ep~werks
           ep~matkl
           ep~mwskz
           ep~menge
           ep~meins
           ep~netpr
           ep~netwr
           ep~mwskz
           into corresponding fields of table it_ekko
           from ekko as ek join ekpo as ep
           on ek~ebeln = ep~ebeln
           and ek~loekz = ep~loekz
           and ek~bukrs = ep~bukrs
           where ek~ebeln in s_ebeln
           and ek~lifnr in s_lifnr
           and ek~ekorg in s_ekorg
           and ek~ekgrp in s_ekgrp
           and ep~werks in s_werks
           and ep~matkl in s_matkl.
    if sy-subrc = 0.
        select lifnr name1 from lfa1
           into corresponding fields of table it_lfa1
           for all entries in it_ekko
           where lifnr = it_ekko-lifnr.
    endif.
    if sy-subrc = 0.
        select lblni lzvon lwert packno txz01 ebeln loekz budat  netwr from essr
           into corresponding fields of table it_essr
           for all entries in it_ekko
           where lzvon in s_lzvon
             and lblni in s_lblni
             and ebeln = it_ekko-ebeln.
    endif.
    if sy-subrc = 0.
        select mblnr ebeln erfmg lfbnr from mseg
          into corresponding fields of table it_mseg
            for all entries in it_essr
            where mblnr in s_mblnr
              and lfbnr = it_essr-lblni
              and ebeln = it_essr-ebeln.
    endif.
    if sy-subrc = 0.
      select packno ebeln srvpos ktext1 netwr menge matkl tbtwr meins mwskz from ml_esll
           into corresponding fields of table it_ml_esll
           for all entries in it_essr
           where  srvpos in s_srvpos
            and  ebeln = it_essr-lblni.
    endif.
    if sy-subrc = 0.
      select packno srvpos menge meins netwr ebeln tbtwr from ml_esll
            into corresponding fields of table it_ml_esll1
            for all entries in it_ekko
             where ebeln = it_ekko-ebeln.
    endif.
    if sy-subrc = 0.
      select ebeln vgabe belnr lfbnr mwskz srvpos packno from ekbe
            into corresponding fields of table it_ekbe
              for all entries in it_ekko
                where ebeln = it_ekko-ebeln
                and vgabe = 1.
    endif.
    if sy-subrc = 0.
      select ebeln belnr bewtp from ekbe into corresponding fields of table it_ekbe1
            for all entries in it_ekko
              where ebeln = it_ekko-ebeln
              and   bewtp = 'Q'.
    endif.
    loop at it_ml_esll into wa_ml_esll.
        move wa_ml_esll-packno to wa_final-packno.
        move wa_ml_esll-ebeln to wa_final-ebeln1.
        move wa_ml_esll-srvpos to wa_final-srvpos.
        move wa_ml_esll-ktext1 to wa_final-ktext1.
        move wa_ml_esll-meins to wa_final-meins.
        move wa_ml_esll-menge to wa_final-menge1.
        read table it_essr into wa_essr with key lblni = wa_ml_esll-ebeln.
        if sy-subrc = 0.
          move-corresponding wa_essr to wa_final.
        endif.
        read table it_ekko into wa_ekko with key ebeln = wa_essr-ebeln.
        if sy-subrc = 0.
          move wa_ekko-werks to wa_final-werks.
          move wa_ekko-ekorg to wa_final-ekorg.
          move wa_ekko-ekgrp to wa_final-ekgrp.
          move wa_ekko-ebeln to wa_final-ebeln.
          move wa_ekko-menge to wa_final-menge.
          move wa_ekko-matkl to wa_final-matkl.
          move wa_ekko-mwskz to wa_final-mwskz.
          move wa_ekko-lifnr to wa_final-lifnr.
          move wa_ekko-bedat to wa_final-bedat.
          move wa_ekko-netpr to wa_final-netpr.
        endif.
        read table it_lfa1 into wa_lfa1 with key lifnr = wa_ekko-lifnr.
         if sy-subrc = 0.
          move wa_lfa1-lifnr to wa_final-lifnr.
          move wa_lfa1-name1 to wa_final-name1.
        endif.
        read table it_ekbe into wa_ekbe with key lfbnr = wa_ml_esll-ebeln
                                                 packno = wa_ml_esll-packno
                                                 srvpos = wa_ml_esll-srvpos.
        if sy-subrc = 0.
          move wa_ekbe-belnr to wa_final-belnr.
        endif.
        read table it_ekbe1 into wa_ekbe1 with key ebeln = wa_ekko-ebeln.
        if sy-subrc = 0.
          move wa_ekbe1-belnr to wa_final-belnr1.
        endif.
        read table it_ml_esll1 into wa_ml_esll1 with key srvpos = wa_ml_esll-srvpos.
        if sy-subrc = 0.
          move wa_ml_esll1-menge to wa_final-menge2.
          move wa_ml_esll1-netwr to wa_final-netwr.
          move wa_ml_esll1-tbtwr to wa_final-tbtwr.
        endif.
        read table it_mseg into wa_mseg with key lfbnr = wa_essr-lblni
                                                 ebeln = wa_essr-ebeln.
        if sy-subrc = 0.
            move wa_mseg-mblnr to wa_final-mblnr.
            move wa_mseg-erfmg to wa_final-erfmg.
        endif.
        append wa_final to it_final.
      endloop.
    delete it_final where srvpos is initial.
    sort it_final by srvpos lblni ebeln .
    Edited by: Satvikpanchal on Dec 6, 2011 11:01 AM

  • XML Publisher with Service Module - Service Request Reports -- URGENT

    Hi all ... any pointers/help/guidance with the problem listed below would be much appreciated.
    I'm working in the context of the Oracle Service Module & Service Request Reports.
    I'm required to configure the XML Publisher Responsibility seeded functionality with the service module reports.
    Listed below are the two reporting requirements that I'm considering , corresponding to the following seeded XMLP Responsibility seeded components:
    (I'm quoting an extract from the Oracle TeleService Implementation & User Guide here).
    Detailed Report
    Data Definition: Service Request Detail Definition (CS_SR_DETAIL_DEF)
    Corresponding Template: Service Request Detail Report Template (CS_SR_DETAIL_TMP.en)
    Template Description: Includes all of the available service request attributes including charges, the two descriptive flexfields, and extensible attributes.
    Summary Report
    Data Definition: Service Request Summary Definition (CS_SR_SUMMARY_DEF)
    Corresponding Template: Service Request Summary Report Template (CS_SR_SUMMARY_TMP_en)
    Template Description: Includes a subset of the detailed report attributes including the same charges information as the detailed report.
    When I log into the EBS >> XML Publisher Administrator Responsibility >> Service Application ... I find these seeded XMLP components, together with the preview data, downloadable templates & sample output.
    The question is:
    Where (responsibility/application/navigation/etc.) do I find the seeded EBS Service Reports to provide the expected XML input to the seeded XMLP Service Request Data Definitions & Templates????
    Notes ...
    I have found the following two reports, under the Service Application in EBS, set their output type to XML and viewed the output of the submitted request:
    - Service Request Detail Report
    - Service Request Summary Report
    ... but each of these two reports produce XML output of a different data model/structure to that expected by each of the corresponding seeded XMLP data-definitions/templates.
    Additionally, I cannot find any corresponding concurrent program definitions on the system with the same SHORT-NAME/CODE as the seeded XMLP data definitions themselves i.e. CS_SR_DETAIL_DEF and CS_SR_SUMMARY_DEF.
    Are the necessary reports not actually seeded within EBS? Do the seeded XMLP data definitions & templates require development of new Concurrent Programs from scratch to access the database tables and provide the necessary data/input, or am I missing something here??

    I am sure you found a solution to your problem. If not, to give a pointer to this issue, I guess these reports are gererated right from the service request screen and this definition is used there.This report can be generated from several places based on where you are within SR scree.
    Thanks
    Nagamohan

  • I have HP Deskjet 3510 connected wireless - problem is that it wants to print only black and white - is there a color button I am missing?  The print quality report is fine in color etc.

    I have a HP Deskjet 3510 and it wants to print only in black and white. 
    The Print Quality Report is fine and in color.
    Is there a color button I am missing?

    In the Print & Scan system preferences, does it indicate it is using a generic printer driver or a Gutenprint driver?
    Also, if you click on Options & Supplies, you might want to check and see if has to be enabled. That kind of sounds odd though.
    Another thing is it might not be showing. If the bottom of the print dialog has a button that says "Show Details," click it. Then, you can change settings in the popup menu.

  • How to configure Service Level Reporting???

    Hi All,
    I have to configure Service Lever Reporing (SLR) on my solution manager for managed systems. Can any one please help me in configuring it? A Step-by-step explanation will be a great help.
    Waiting for your kind responses.
    Regards,
    Faisal

    Hi Jared,
    Thanks for sharing the link. I have gone through the link.
    However, when I edit the "Setup Service Level Reporting" by click the link under "Solution Monitoring->Service Level Reporting" under "Operations Setup", I could get the screen where in I found the below details:
    1. Setup SL Reporting (On the left Pane)
    2. Variants Administration (under the above head tree)
    On the right pane, I could find:
    1. Name
    2. Type
    3. Weeday of Processing
    4. Active
    5. Date of Next Report
    I could successfully give the above details and saved it. However, I dont see any provision for seleting the system SIDs as mentioned in the help.sap.com site proposed by you.
    May you help me in selecting the System SID for which I need to declare SLR?
    Regards,
    Syed

  • Sony Mobile Indonesia: Bad Service Quality

    Greetings to you all.
    My name is Giovan Pangku from Indonesia, an owner of Sony Ericsson Xperia ray ST18i.
    I am also a member of a facebook group, "Xperia Community", a group where we share everything about Xperia devices.
    On this thread, I'm going to explain about a petition that I made on 10 June 2013, for Xperia users in Indonesia, regarding the bad repair service quality. I'll just make this thread short and simple.
    The petition was made because I read comments from members, complaining about the long time that Sony Mobile Indonesia takes to repair their devices (starting from 2 weeks, until more than 4 months), or devices that got broken again after a repair (or in several cases, more than once).  Their reason was the delay in importation of spare parts.
    The Manager of Customer Service of Sony Mobile Indonesia, Mr. Roi Permadi, contacted me several times by email, explaining things regarding the delay. I could understand at first.
    But it's already February 2014 now without much significant improvement. I also already contacted someone from Sony Mobile Sweden, assuming that Sweden is the headquarter for Sony Mobile (I know Sony is from Japan), and that someone contacted Mr. Roi Permadi to contact me again, and it was no use. So I wonder if Sony Mobile International can help us address this issue?  Does Sony Mobile Indonesia always run out of spareparts?  How can we, as customers, wait for months just for phone repair? Does this mean that Sony Mobile is not ready to serve its customers in Indonesia?
    More about the petition is here:
    https://www.change.org/en-AU/petitions/sony-mobile-indonesia-must-change-their-disappointing-repair-...
    Currently, more than 2200 Xperia users in Indonesia have signed it.
    So please, Sony, don't let us be disappointed in Indonesia.
    Regards,
    Giovan Pangku
    Petition starter
    Indonesia

    i have same problem

Maybe you are looking for