CRM to R/3-PS Replication.

Hi all,
I'm using cProjects for creation of the projects allocation of resources(staffing) to the projects in CRM and it'll be replicated to R/3-PS. I'm getting an error message saying that projects and wbs already exists for some of the projects. I know how to debug the replication. but i've two questions here.
1) I've the rfcuser created as a system user if i change this to dialog user will it affect any other communication settings or what are the consideration that i've to look prior changing this to dialog user.
2) when i look at the information thru smw01 and selected the bdoc type CRM_CPRJ_MBDOC and selected project with the ext data and i'm able to see the projects which is not replicating has the participant task type as STATUS but normally it'll be CREATE, UPDATE, DELETE. will there be anything in this?

Antony, to answer your first question, your RFC-user should be set-up as system user and NOT as dialog user. Reason for is security related, you can log-on with a Dialog user not with a System user.
Second question is more complicated. Where there any existing projects already in your R/3 backend system causing the error message? Second the 'Status' in the BDoc that you see, isn't that caused by an empty field value? Tiest.

Similar Messages

SRM 7.0 - CRM middleware settigns for material replication

Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.

Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa

Problem in CRM Complaint Transaction Return Request replication

Dear all,
I have created a Complaint and from it Created Return Request. I could see the replicated Replicated Return Order in ECC system.
But the following problems are facing.
In CRM Complaint Transaction 'System Status' is showing as 'To be distributed Open'.
When I try to change the Complaint transaction in CRM (after replicating the return request in ECC ) system showing message 'Document is being distributed; changes are not possible' in the status bar.
There is no document flow displaying in CRM Complaint transaction.
I could not understand where the problem is occuring. Please help me to solve the above issue. Your suggestions are highly appreciated.
Best regards
Raghu ram
Edited by: Raghu Ram on Jun 11, 2010 2:19 PM

Hi Maggie,
Thanks for the response, Yes the problem is for all documents and I have cleared Inbound and Outbound queues of both systems and tried again. But still the problem is exist.
Your help will be highly appreciated.
Best regards,
Raghu ram

CRM MIDDLEWARE QUERY FOR PRODUCT REPLICATION -URGENT

Hello All,
I am replicating the product categories(in SRM terminology) i.e. initia load of Material groups from backend(R/3) into the SRM system through the CRM Middleware.
At the r/3 side in the tcode SMQ1(Outbound Queue),i am getting the status as STOP while at SRM side(i.e. CRM middleware) in the tcode SMQ2(Inbound queue),i get the status READY.Also when I go in for the transaction of Monitoring Initial Load (R3AM1),I get the status as RUNNING.
Can anyone please tell me how much time it takes to download these objects because I had started the Initial Load for 4 Objects out of which the 1st object took 4 hrs to be downloaded!Please help.
Thanks & regards,
Disha D

Also I got an error in executing the report BBP_PRODUCT_SETTINGS_MW with the foll information text :-
The termination occurred in the ABAP program "SAPLSMSG" in "MESSAGE_STOR
The main program was "BBP_PRODUCT_SETTINGS_MW ".
The termination occurred in line 44 of the source code of the (Include)
program "LSMSGU02"
of the source code of program "LSMSGU02" (when calling the editor 440).
What customizatuon/configuration settings are required for this report to be executed succesfully????
Disha

CRM Middleware in Material Master replication

Hi All,
Why CRM Middleware is required to replicate Material Master from ECC to SRM whereas the Vendor Master
is replicate with Transaction....could you please explain.
Thanks & Regards
venu

If your CRM system is new then you have to do the initial download of material from ECC to CRM. To do that first download the material customizing object (like category. group etc), from transaction R3AS (CRM side) then download the product/Material.
After do the initial download, activate the change pointer for the material related message type (matmas etc..)from transaction SALE (ECC). And schedule I job to run its on daily basis.
If can check the below link for details
[http://help.sap.com/saphelp_crm52/helpdata/EN/46/57605301a208e7e10000000a114a6b/content.htm]
Thanks
Subhankar
Edited by: Subhankar Garani on Sep 1, 2011 12:21 AM

CRM sales Order Replication to R/3

Hi ,
Can anyone tell me what are the configuration that we need to do CRM to R/3 replication for sales orders apart from site and subscription creation(SMOEAC) and CRMCONSUM maintenance.
I am mainly looking on what are middleware parameter that we need to set. How custom process type of CRM mapped with custom order type of R/3.
It will be appreciated if you give me documentation of middleware parameter and their tables.
Thanks in Advance

Hi Pradeep,
The Business transaction Replication from CRM to R3 is mainly based on the "Transaction Type" / "Process Type" (both are same) of the particular transaction - whether its a standard one or a custom one. It doesnt matter whether the mapping is Order to Order or Contract to Contract. Also, you need proper external-internal number ranges in order to make the mapping error free (even without the number ranges, the mapping will happen and the contract will flow).
For documentation on Middleware settiing, check the following document.
Best Practice C71 - connectivity.
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C71_BB_ConfigGuide_EN_US.doc
For Business Transaction mapping Configuration, refer , "C03: CRM Master and Transaction Data Replication":
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc
If you want full Middleware setup, in best practice, follow the documentation - B01, C71, B09, C03 in that order. You can get those from http://help.sap.com/bp_crmv250/CRM_DE .
Regards,
Alin

Deactivate replication of contact persons from R/3 to CRM

Hi,
i'm replicating customer relationships from ECC6 to CRM2007. All fine, including z-partner functions etc.
One thing Im baffled by however is the replication of contact persons. Contact persons will be created in CRM only, without any integration/replication with ECC6. Since there are existing contact persons in the ECC6 master, I want to deactivate that replication.
So I hae deleted the mapping for master data transfer in CRM in the IMG under Basic Functions => Partner Processing => Data Transfer => Distribution of Partner Functions from SAP ECC into CRM
and Distribution of Partner Functions from CRM into SAP ECC.
But if I create a contact person in ECC6, it STILL replicates through to CRM!! Any ideas how to de-activate that replication? I don't want to end up with failed BDOCs in the middleware if posible.
regards
Jens

Hi Srikanth,
thanks a lot for your reply. However the approach needs to be a bit more sophisitcated than that. I do replicate through a number of r?3 partner functions into relationships in CRM, e.g. ship-to and 3 z-functions (promary CSR etc.). That all works fine and needs to stay that way.
However I do need to deactivate the replication of the R/3 contact persons to CRM.

Replication of Customer master data from R/3 to CRM.

Dear Friends,
If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
REgards,
Prabhu.

CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
For CRM 5.0 you can use the link below:
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
You then need to read the instructions for:
CRM Generation
CRM Connectivity
CRM Customizing Replication
CRM Organization Model
CRM Master and Transaction Data Replication
Those steps will provide on how to setup the middleware for customers.
You then will need the to read the following building blocks for marketing:
CRM Central Master Data
CRM Marketing Master Data
CRM Lean Campaign Management.
Good luck,
Stephen

Replication of sdata form r/3 to crm

can any one help me in how data is replicated from r/3 to crm and what are the advances and additions in crm 5.0
thanks and regards
rajesh
if anybody could provide me with doccuments
[email protected]

Hello Rajesh,
all this information should be found in avaliable documentation. So you should not ask to get it send by mail. Please have a look at:
<a href="http://help.sap.com/bp_crmv150/CRM_DE/html/C63_EN_DE.htm">Best Practice Guide</a>
Here you find the Documents:
- B01: CRM Generation
- C71: CRM Connectivity
- B09: CRM Customizing Replication
- C03: CRM Master and Transaction Data Replication
and also go to <a href="https://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&">Release Notes SAP CRM 5.0</a>.
Regards
Gregor

Z table middleware replication from R/3 to CRM

Looking for a CRM Middleware Guru out there !!!
I'm trying to replicate a simple R/3 table (list of countries in my example below. The replication must include both initial and delta downloads.
My problem is the following:
When doing an initial load using Transaction R3AS the BDOC is created correctly.
The traffic lights are green in transaction SMW01 with a status of Confirmed (fully processed).
The segments of the BDOC are populated with the correct value from R3 <b>BUT</b> <b>the table on CRM is not populated.</b>
Here is what I have done so far:
1-Created table on R3 ZCOUNTRY
2-Created mapping Function on R3 Z_CRS_MAP_ZCOUNTRY_BAPIMCTS
3-Created extract Function on R3 ZCOUNTRY_EXTRACT
4-Created an entry in Table CRMSUBTAB for Function ZCOUNTRY_EXTRACT
5-Created Receiving Module in R3 Z_CRM_COUNTRY_COLLECT_DATA triggered on SM30 for the Delta Load
6-Created table on CRM ZCOUNTRY
7-Created Bdoc on CRM ZCOUNTR_MESG
8-Created validation Function on CRM ZCRM_ZCOUNTR_MESG_VAL
9-Add an entry in SMW3BDOCIF for BDOC ZCOUNTR_MESG and Validation Function ZCRM_ZCOUNTR_MESG_VAL
10-Created mapping Function on CRM ZMAP_COUNTRY_BAPIMTCS_TO_MBDOC
11-Created MW Adapter Object in CRM ZCRMCOUNTRY
12-Created a replication Object on CRM ZCOUNTR_MESG
13-Created a publication on CRM ZCOUNTRY
I'm not sure why the CRM does not get populated. Could it have anything to do with "GUID" keys?
The 2 fields on my bespoke table are:
-Country
-Continent
In my Root Data Structure for the MBDOC do I need to add GUID as the first fields i.o.w.
-GUID
-Country
-Continent
When I choose my segment fields do I choose (?):
-GUID
-Country
-Continent
In my CRM Mapping function how do I populate the GUID field? (see the code below in the mapping function). How do I get a value into lv_sfakey and does this have anything to do with the GUID mentioned above.
MOVE lv_sfakey TO segment_line-guid.
AND
MOVE lv_sfakey TO ext_line-data-guid.
Thanks for any help
Manoj

Hi Manoj,
I have a similar situation as you have described. However my problem is that when i start the initial load, the status in the RFC inbound queue of CRM (smq2) shows stop and the oject shows the status running. I dont know how to debug the
Validation FM and Mapping FM written for the same. Can you please explain me the meaning of the status shown in the crm queue.
Thanks,
Vaishali

Replication of Business partner and the Sales document from CRM to R/3

HI All ,
I am completely new to this CRM technical , I need some technical document on how can I replicate BP and sales documents from CRM to R/3 through CRM middleware .
Please help me out in this regard .
Regards
Debasri Sarkar

Hi Debasri
It would be best if you try the Best Practices available on [CRM Best Practices|http://help.sap.com/content/bestpractices/crossindustry/bestp_crossindustry_crm.htm]
Choose the CRM Version you are working on. On the next page that opens up, choose Technical Information-->Building blocks from LHS.
And you can use the Best practice guide titled CRM Master and Transaction Data Replication there to know more about BP and transaction replication between CRM and ECC.
Hope this would help You
Regards
Rekha Dadwal-Shet

Replication od order from crm to r/3

I'm trying to Create order in CRM 4.0 and wanted to replicate to ECC 5.0, for replicating order from crm to r/3,what are the settings required both in r/3 and crm
Thanks&regards
kishore kumar
Edited by: kishore kumar on Jun 11, 2008 12:10 PM

Hi Kishore,
You can refer to in Best Practice C71 - connectivity.
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C71_BB_ConfigGuide_EN_US.doc
The above one is for CRM 5.0, but its similar in 4.0 too, except for a table entry in R3 side. In ECC table CRMPAROLTP, you have to specify the release version of the CRM system.There you mention your proper CRM release (400 instead of 500) . FOr rest of the config, use the same manual.
ALso, refer "C03: CRM Master and Transaction Data Replication":
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc
This 2 docs are sufficient for normal replication.
If you want full Middleware setup, in best practice, follow the documentation - B01, C71, B09, C03 in that order.
Hope this helps. Let me know if you want anything more.
Reward points if this helps.
Regards,
Alin

BP Replication Problem v2 (CRM 5 - ECC 6)

Hi¡¡¡¡
Im trying to replicate BP between CRM 5 ->> ECC 6, but not successful. I just get replicating BPs but is not creating a customer in the ECC system.
I have maintained all steps mentioned in building block - C03 (CRM Master and Transaction Data Replication). I have maintained separate account group approach.I have defined an account group Z001 for customers that are created in the CRM system and have to be replicated to the ECC system (external number assignment in the receiving system).I made sure that number ranges are in sync in both the systems. Particularly in PIDE, mapping classification Customer 'B' and Consumer E to 'Z001'.
In the SMW01, the BDoc is green.
Please help me to resolve this problem. I am in real urgency.
Thanks
Jose Alvarez
[email protected]
Santiago, Chile

Laercio,
Your business partner grouping in CRM is setup wrong. The ZLEV that corresponds to the R/3 CLEV should actually be setup as an external number range in CRM.
The way this working is the following:
If the number originates in R/3 then CRM must use an external number range
If the number originates in CRM then R/3 must use an external number range.
So your CLEV account group should map to a CLEV partner grouping in CRM and the ZLEV must map to ZLEV grouping in R/3.
The CLEV in R/3 will be internal numbering
The ZLEV in R/3 will be external numbering
The CLEV in CRM will be external numbering
The ZLEV in R/3 will be external numbering.
I believe if you do this, then it should allow you to keep the numbers the same for those two account groups.
For issue two: You need to make sure that all your sales areas are setup and the tuples are defined per sales area. Once the tuples have been defined and attributes setup on the organizational units, then you can do another initial load and the sales area should come over again.
Good luck,
Stephen

CRM Inquiry - ECC Inquiry replication

Hi experts,
I have a question about inquiry replication between CRM (6.0) and ECC. What I am looking for is the following process:
- In CRM: creation of an opportunity
- This opportunity should be replicated to a ECC Inquiry document.
From the inquiry in ecc we would like to create an PS project, from here an quotation, and replicate this quotation back to CRM.
I'm not sure, but I thought the replication of CRM Opportunity to ECC Inquiry is not possible.
Therefore, an alternative.
- In CRM: creation of an Inquiry
- Replication of this inquiry to ECC.
Is there an inquiry transaction type in CRM? Can't find it... Is this Inquiry replication from CRM to ECC possible?
Thanks!!!
Jasper.

Hi
You got any solution for the scenario. How you completed the process . I also have the same scenario

Sales Order Issue From CRM to R/3

Hi Gurus,
We have an issue where all Bulk ISS orders are showing up in the OTD BW reports as unreported even though they have been reported shipped. The issue appears to be, that for ISS orders only, the schedule line item number for the base bulk line, shows up as "4001" and not "1" as it typically does. The manual orders and all EDI orders do flow through with a schedule line number of "1", but not the ISS orders. Please investigate why this is occuring for ISS orders. .
Further to this issue ...
Order XXXXXX is a CRM order for sales BOM material and this order in R/3 has the schedule line item number for item XX as XXXX. It appears that all Sales BOM orders from CRM are getting the schedule line item number of 4001. Please debug and investigate as to where this is coming from.
It is basically abt Schedule line number instead of
1 it is 4001 ...
Please guide me
How I do I go abt this .. is there a bapi call that I need to refer to
Please help points guaranteed...

Middleware are a set of transactions. For replication some tx are:
R3AC1     Objetos de Datos (Business and Condition Objetcs)
R3AC3     Objetos de Customizing
R3AC4     Activation of Delta Download
R3AC5     Adapter Object Overview (Customizing Download) - Initial Upload of Condition MD
R3AM1
R3AS     Initial Load
SMQ1     qRFC Monitor (Outbound Queue)
SMQ2     qRFC Monitor (Inbound Queue)
You need to create a Site (r3) and suscription for replication in tx SMOEAC . The suscriptions area standard: product, business partner, sales document, etc.
Also you need defined filter for customizing replication and data replication in tx R3AS and R3AC1.
You can use best practice for replication. You can access on: http://help.sap.com/bp_crmv250/CRM_DE/index.htm. Access to "C03: CRM Master and Transaction Data Replication".
Some points...
Regards

CRM to R/3-PS Replication.

Similar Messages

Maybe you are looking for