CRM UI Translation: Search does not show Business Partners in Spanish

Hi, I have customized SMAD, SMCR, SMHF, SMMJ to Y* space.
The customer needs to use system in Spanish - > language pack installed. Hence I logged in using Spanish and translated the Business partner fields etc in SPRO.
Everything is okay in the Create "Urgent, Normal, Admin, General" change areas however when I use the Search functionality,
You can see the results in the English versions as below.
Same search, same results, same number of search results when I am logged in using Spanish, but interestingly no entries in the fields.
Any ideas why this is happening.
What could be the resolution to fix this issue?
Regards,
Ranjith Raghunathan

Hi Vikram,
Thanks very much for your quick response. the note seemed relevant at start, but when I checked the note, the issue that I mentioned is not in the list of issues that the note fixes I think though it says "Relevant for Translation".
However I tried to implement the note but it "Cannot be Implemented", Also tried to run the manual report mentioned in the note. Does not find the report to run.
So the issue is not fixed.
I have raised a customer message. If any other information is available it will be good.
Thanks
Ranjith

Similar Messages

Af:statusIndicator does not show busy icon when a command button is click

Hi Guys,
af:statusIndicator does not show busy icon or motion when a command button is click
I am working on an excel data upload functionality on .jspx page. I use “af:inputFile” file uploader to upload an excel file then process the data and store it as a list of objects in memory and display it in “af:table” table
I added “af:statusIndicator” to the page to show the user that the page is progressing while the data is uploading and when it is saving the data to the database.
In this case, when the “af:inputFile” is clicked to upload the excel file - the status indicator shows a progress icon (movement) which is expected and is good. However, after the data have been display in the table when I click on a command button that saves the data to the database – I expected the status indicator to start its busy motion but that is not happening. Whereas, the command button grayed out and is disable when I clicked the button until the operation is completed.
Is there any way to start the statusIndicator when a command button is clicked?
I tried the following options
*<af:statusIndicator id="si1_uploadStatus" partialTriggers="pc1:cb1 pc1:table"/>*
Where pc1:cb1 is the command button and pc1:table is the table
*<af:commandButton text="Submit Uploads" id="cb1"*
*disabled="#{!viewScope.batchUploadController.allSavable}"*
*partialTriggers="::infFilePath"*
*action="#{viewScope.batchUploadController.saveUploadedData}"*
*blocking="true"/>*
Thanks,

Can somebody please address this?
Thanks,

Outlook 2007 instead search does not show the items which are actually present in the inbox and folders

Scenario:
when user search for any particular email item by using the sender name or subject name it does not show any result. At the same time it works fine when he specify the search folder(target folder) instead of searching it across all the folders/sub-folders.
1. We tried reconfiguring the outlook profile but this not fixed the issue.
2. It is specific to only few users but so far for all the others users it works fine.
3. Restarted the “Microsoft Exchange Indexer Service” but this is also not fixed the issue.
4. Hence the outlook reconfigure not worked, rebuild the search index not tried yet, but will give a try.

Hi,
Did the user select All Mail Items scope when searching in Outlook?
In addition, please make sure the user is not searching in a shared mailbox because in some configurations, you are limited to using the
Current Folder search scope when searching in a shared mailbox.
Please also let me know the result if you have tried rebuilding index.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

EAS does not show Business Rules node

I'm in the process of validating an 11.1.2 Planning installation. This is the development environment, so one Essbase server, one everything else server.
One of the issues I've run across is that my client install of EAS does not have a Business Rules node (I am staying away from Calculation Manager because of multiple horror stories from multiple sources I have heard about it).
However, it does show up in the launched-from-the-web version.
The web launched release numbers are:
EAS 11.1.2.0.00.462
APS 11.1.2.0.0.615
HBR 11.1.2.0.0.722
And now this gets really weird. The client launched release numbers are:
EAS 11.1.1.2.0.00.462
APS 11.1..2.0.0.615
HBR *4.1.1*
Somehow my clean install has magically gotten the last release of Planning 4's Business Rules?
It sure sounds like something didn't get installed correctly. I was able to find this thread regarding the same problem:
How to add HBR plugin in EAS console
In that thread, RahulS wrote:
To sort this out give a try to copy common/log4j folder from the sever to the client or install the Integration Services Client on the machine where the Administration Services Console is installed.Unfortunately, there are multiple log4j folders and none (that I can see) that have a parent of common. Can anyone give me some guidance as to if this is a good solution and if so, a better hint as to what log4j folder I should grab?
Thanks,
Cameron Lackpour
P.S. I found the install log for EAS and found two errors at the end of the install process, but I believe these are related to writing an icon to the desktop. This doesn't surprise me as this Vista laptop is locked down tight.
Apr 13, 2011 11:00:02 PM), Install, com.installshield.product.actions.DesktopIcon, err, ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
STACK_TRACE: 22
ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Native Method)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.desktop.GenericDesktopService.createDesktopItem(Unknown Source)
     at com.installshield.product.actions.DesktopIcon.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:2969)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:8048)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:7199)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:5240)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)
(Apr 13, 2011 11:00:02 PM), Install, com.installshield.product.actions.DesktopIcon, err, ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
STACK_TRACE: 22
ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Native Method)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.desktop.GenericDesktopService.createDesktopItem(Unknown Source)
     at com.installshield.product.actions.DesktopIcon.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:2969)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:8048)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:7199)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:5240)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)P.P.S. In the easconsole-move-hbrcfile-frtemp-stderr.log file, I see the following error:
The system cannot find the file specified.This sort of suggests that indeed something died on install.
Edited by: CL on Apr 14, 2011 2:36 PM
Edited to clean up RahulS' quote.
Edited by: CL on Apr 14, 2011 3:50 PM
Error file contents added

There you go I was on the right track, who needs oracle support :)^^^Isn't this board a sort of unofficial Oracle support? I have to admit that after my first fruitless search of the KB on support.oracle.com, I purposely came here first before I had the client log a SR.
That's wrong, of course, or at least a little illogical, given that the customer pays for support and after all, answering these kinds of questions is sort of their primary job. Putting on my ODTUG hat, KScope 2011 is going to have a support symposium that is going to focus on process (like why is Cameron so brain-dead that he can't type 'EAS and node' into the KB search field which pops up the obvious answer?) so that people don't do a time waster like I just did. It's going to have some pretty big names and I hope you all can come.
I'm going to forward this thread to my contact at Oracle support as evidence that even "intelligent" people could use some help with how to do searches, no matter how elementary that may be.
Regards,
Cameron Lackpour
P.S. If I could make the background of this post have a color, it would be blush pink, to match the tenor of my cheeks. I can be a total idiot some times. Thanks John and Rahul.

Open file dialog search does not show the correct files

When i use "open file" in the menu of, for example Pages, and then type a word of my desired file name into the search dialog it does not always find the file. Searching in Finder works. And the file is where it is supposed to be.
Does it use different kind of searches? I have "reindexed" spotlight but no avail.
Of course i can look for the file manually and then start pages by double clicking the file...
Any ideas?
thanks wolf

I'm not sure how Pages treats this, but it's possible that from an Open File dialog it may only search either the current directory or the default documents folder. Not sure about this as I'm not a Pages' user.

Google search does not show results must press RELOAD button for it to work

Hello,
I am using FF 17.0. This just started recently.
When I go to Google and enter a search word and hit "enter" the results page loads with just the top header and a blank screen otherwise. I need to hit the RELOAD button in the address bar for everything to complete with results..
Then, after scrolling thru the results to the bottom of the page and hitting ENTER to go to the next page, again the same thing happens. I need to hit the RELOAD button again for more results.
This happens for every search I do when using FireFox.
It works perfectly fine in IE. I hate IE.
Any help would be greatly appreciated.

Is is best not to use extensions like Fasterfox that change network.http settings. 
You should leave them at the default as changing them can cause problems with some servers.
You can check the network.http.* prefs on the about:config page. 
Reset network.http prefs to the default value via the right-click context menu -> Reset if they are user set (bold).

Copy of Application does not show " My accounts" in search show

Hi
I am using CRM 4.0
I have copied the application CRMM_ACCOUNTS through blueprint application builder using save as
The new application does not show "My accounts" in search show
It is just showing "My favorites"
Can somebody please tell me the reason for it or how to bring "My accounts" in search show
TIA
Asad

May be while copying the application "My Accounts" is not copied.
But you can create one by saving the Query.
Seelct "My Account" in the Find DDLB while in adv search and save the query as "My accounts".
It will be added to the SHOW DDLB.
Cheers, Raj

I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available. Does not show up when I search for it. Plenty of memory . . .

I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated

Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D.

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

My hard drive icon is gone from desk top and does not show up in spotlight or finder searches!

Hi there
recently my hard drive icon has disappeared from my Macbook Pro (10.7.4) desk top and does not show up in spotlight or finder searches! I have tried several fixes posted online for earlier operating systems with no luck.
Also, when I connect my external hard drive the icon does not appear on the desl top nor in the finder either, making looking for documents impossible.
Help!!!
Thanks in advance!
Marni

In "finder" click "finder" then "preferences" and navigate to the "general" tab.
Select which items you would like to have show on your desktop.

I set up a location based reminder in notification last week to test it out. Worked great, but now I cannot get rid of it. It does not show up in any list on the notifications pages, but can be found in search. How can I get rid of this notification?

Last week I set up a location based reminder in notifications to test it out. Worked great. However, I can't get rid of it. It does not show up on any of the pages, either reminders or completed. I can search and find it, shows it should be in reminders page, but it is not there for me to remove. Any ideas?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

CCM 2.0 Simple search on CSE does not show any result

Hello guys,
I'm trying to search items by means of simple text search in CSE. Unfortunately, the system returns no result, though I can see the items by means of category search (that makes me thing that it's not a problem of views).
I search for a part of the description text (and Short Description is a searchable characteristic).
I regenerated TREX indexes with /CCM/RECREATE_INDEX report, but with no success.
Have you got any idea?
Thanks a lot!
Pierluigi

Hi Atul,
thanks for your support. Unfortunately, all the suggested notes are inapplicable:
Note 871302 - Unable to switch between catalogs using F4 help --> Outside our issue
Note 890967 - /CCM/CHECK_TREX shows incorrect document content --> Covered by our SP Level
Note 946185 - CCM20: /CCM/CHECK_TREX modifications --> Covered by our SP Level
Note 707781 - Product search does not find all documents --> Outside our issue
Note 723688 BBP TREX corrections for SRM 4.0 SP01 --> Outside our issue
Note 778688 TREX_INDEX_MANAGER unit test update_view(): incorrect search --> Covered by our SP Level
Note 930788 - Search help for catalog does not display all catalogs --> Outside our issue
Note 1028343 Changes in the repository not reflected in Catalog UI --> Outside our issue
Note 1015201 - SRM-MDM Catalog 1.0 Patch02 Release Note --> Outside our issue
Note 487917 BADI implementation f. BBP_CATALOG_CONTENT (Troubleshooting) --> Outside our issue
Note 877131 Product category is not permitted for the user --> Outside our issue
Note 623067 SRM 2.0 Integrated Catalog does not display catalog info --> Covered by our SP Level
Thx again.
PD

When using the google translate js api to dynamically translate a webpage the chosen option in a select element does not show up. This happens to me only in FF (using v4)

I am asking you this because I did not find this problem in any of the other browsers I have (chrome, opera, ie, safari).
I uploaded a simple html file to show this problem here: http://rvyu.com/mKLG
Notice that if you don’t change the language you have no problem changing the value in the select element (the original one with 3 options, not the one generated by google translate) but if you do when you switch values the selected one does not show up.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

CRM UI Translation: Search does not show Business Partners in Spanish

Similar Messages

Maybe you are looking for