CRM url transaction launcher

Hi Experts,
I'm using CRM web UI.I defined URL and configured in the transaction launcher.Now I'm able to see the newly created transaction launcher in web UI.When I'm clicking on this, new window is opening as a popup window(without having
menu bar-->File,EDIT,VIEW,FAVORITES...etc). Now the requirement is to open in full browser(it should have menubar, titelbar..etc).Please provide me your valuable inputs on this.
Thanks & Regards,
S.Gangireddy.

Hi,
SAP has taken into account this point in the new versions (for me SAP 702 EHP1), with a new attribute in the customizing of the transaction launcher called "Keep Work area" :
Keep Work Area When Opening Launch Transaction in New Window
This indicator defines whether the work area content is kept when you open a launch transaction in a new window.
Use
If this indicator is not set and a launch transaction opens in a new window, then the main window loads the base page of the transaction launcher into the work area.
If this indicator is set and a launch transaction opens in a new window, then the main window keeps its current content in the work area.
Dependencies
This indicator is only evaluated if you have also set the indicator for using a new window.
Regards,
Imed.

Similar Messages

  • ECC BSP page display from CRM through Transaction Launcher

    Hi Experts,
    We have a BSP application in ECC and want to launch the page from CRM using transaction launcher. The page is already launched from a different link. Is it possible to use the same transaction launcher from new link to navigate to the same page?
    Thanks,
    JC

    Hello JC,
    Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
    Transaction Launcher
    Regards,
    Ashik

  • ITS WebGUI in CRM(By transaction launcher )

    Hi all,
    We would like to incude transaction "S_AE2_89000019" from CRM to SAP CRM WEB Client UI.
    We have done the following steps using the SAP best practices (C04-Configuration guide):
    1. in transaction CRMS_IC_CROSS_SYS we have configured the CRM system with url: http://CRMnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
    and ERP system with url
    http://ERPnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
    2. we have set TSTC to synchronous (CRM and ERP)
    3. we have configured transaction launcher through wizard (tx CRMC_UI_ACTIONWZ)
    4. we have created logical link for transaction and we assigned the link to work center and business role.
    The problem is that when we are opening the SAP CRM web gui and click on the link that we have created, we take a blank picture with a red x "PLease wait..." and nothing else opens.My CRM Version is 7.0 EHP1.
    The webgui service in the tx sicf have been a test, after login in, a blank picture with a red x "PLease wait..."  is also remaining.
    Can anyone help?
    Thanks in advanced.

    Lei Cao,
    Want to check if this issue is resolved. I have the same problem where I am getting 'please wait" with red x screen when I configured transaction launcher from crm web ui.
    Did you ever get this resolved? If so please share your approach ? And is this authorization related?
    Rajani

  • CRM 2006s Transaction Launcher via Outbound plug

    Hi,
    I'm using CRM 2006s and want to launch a URL from a button in a toolbar (not the navigation bar).
    In CRM 2005 you would created a transaction launcher and via navigational links call IC_BASE\ABoxExecution and set the id using cl_crm_ic_cucoaction_impl=>set_action_id_no_formatting.
    However in CRM 2006s, IC_BASE is not the frame work BSP so therefore this call will not work. 
    Can anyone please assist on however to fire a URL via a outbound plug?
    cheers and greatly appreciated.
    Joe

    Thought I found the answer but still no luck.  Anyone help...

  • Unable to access ECC transactions from CRM using Transaction Launcher

    Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
    1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
    2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
    3)     Is there any other issue and need development specifically related BOR TSTC?
    Warm regards and thanks in advance for your time.
    Prasad

    Hello JC,
    Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
    Transaction Launcher
    Regards,
    Ashik

  • How to debug Transaction Launcher

    Hi Experts,
    I am new to CRM. I  am working on the requiremnet of calling VA01 screen  inCRM WEBUI through Transaction Launcher .
    As part of it i copied TSTC BOR object to Z and added some extra method to get some default values populated in VA01 screen.
    I tested this Z BOR object and it is working fine. Now in CRM configured Transaction Launcher through wizard and given my logical system (connecting to ecc)and Z BOR object and passed parameter value as VA01 to object key in wizard. created my own logical link id with assigned transaction link id and assigned to workcenter->navbarprofile->businessrole.
    I followed this blog to configure Transaction Launcher
    /people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
    After completion of above development i executed webui but i am unable to display VA01..Intially it used to show ECC screen and message as ' you do not have authorization for transaction VA01'.But when i rectified some thing and again execute webui it is now showing blank screen.
    I am unable to make it out where i went wrong whether the problem is with logical system or ZBOR object. WhenI tried to debug it by keeping break-point in the class CL_UICMP_LT_ABOXEXECUTION_IMPL and method ip_inbound plug and in the ZBOR object in ECC  i am able to see the parameters passed to the traunsaction launcher class but it is not stoping at ZBOR object .
    From last 3 days i am trying hard and unsuccessfull.my deadlines are approching.
    Please kindly help me out how  can i analyze to see where i went exactly wrong.
    I really appreciate the persons who helps me in passing the situation.
    Regards ,
    Pavan T.

    Hi Luis Rivera ,
    Thanks a Ton. The link id 'Every thing about Transaction Launcher' is really helpfull.Now i am  able to display VA01 in Webui .
    My Requirement goes like this
    User will search for a account say of function 'Sold-to-party' ,after successfull search we will get related partners also.Now user will select one among the related partners(say 'Ship-to-party') and clicks confirm ,Now we will have two confirmed partners sold-to & ship-to.User will now select create order from Navigation bar and VA01 screen should be displayed with sold-to & ship-to fields get filled automatically from conformed partners.
    So i created a ZBOR and added a method with those parameters as import parameters . see the below code.
      SWC_GET_ELEMENT CONTAINER 'PCODE'      LV_PCODE.
    SWC_GET_ELEMENT CONTAINER 'BUYER'      LV_BUYER.
    SWC_GET_ELEMENT CONTAINER 'SHIP_TO'    LV_SHIP_TO.
    SWC_GET_ELEMENT CONTAINER 'SOLD_TO'    LV_SOLD_TO.
    SWC_GET_ELEMENT CONTAINER 'ORDER_TYPE' LV_ORDER_TYPE.
    IF LV_PCODE IS NOT INITIAL.
        SET PARAMETER ID: LV_PCODE-pid FIELD LV_PCODE-value.
      ENDIF.
    IF LV_BUYER IS NOT INITIAL.
        SET PARAMETER ID:  LV_BUYER-pid FIELD  LV_BUYER-value.
        ENDIF.
    IF LV_SHIP_TO IS NOT INITIAL.
        SET PARAMETER ID: LV_SHIP_TO-pid FIELD LV_SHIP_TO-value.
    ENDIF.
    IF LV_SOLD_TO IS NOT INITIAL.
        SET PARAMETER ID:  LV_SOLD_TO-PID FIELD  LV_SOLD_TO-VALUE.
    ENDIF.
    IF LV_ORDER_TYPE IS NOT INITIAL.
        SET PARAMETER ID 'AAT' FIELD LV_ORDER_TYPE-VALUE.
    ENDIF.
    CALL TRANSACTION OBJECT-KEY-CODE.
    I am able to read the values from BOL to my ZBOR parameters
    PCODE, SHIP_TO,SOLD_TO,BUYER e.t.c .Now i want set these values to VA01 screen using SET/GET Parameter ID's as shown in above code.but these values are not being set.Could you suggest any way how can i achieve this.
    Thanks in Advance.
    Regards,
    Pavan.
    Edited by: Pavan T on Aug 10, 2011 4:26 PM

  • LAUNCHING URL BY CLICKING ON BUTTON(USING TRANSACTION LAUNCHER) IN CRM 2007

    Hi,
    I am working on the object which requires configuring transaction launcher so that when button is clicked,URL is open. This development need to be implemented in CRM 2007.
    Kindly suggest.

    We are working in a sandbox environment on CRM 2007 and trying to launch a transaction in an ECC 6.0 system. We get a login box into the ECC server which executes fine but after a few seconds we are returned back to the CRM server without displaying the transaction. All authorizations are correct but it seems that the container is not being populated with the requested transaction. Has anyone else seen the same behavior? We are about to put in a note to see if we can get assistance. We have implemented latest Support Packs and Enhancement Pack 3 was recently installed in the ECC environment. We have implemented all the appropriate notes (1029777) to make sure that we are using the recommend functionality.

  • Using transaction launcher to connect CRM 7.0 to a CRM 6.0 system

    Hello Experts,
    We are considering integrating two IC Web client applications one on CRM 6.0 and the other on CRM 7.0 as transition step before the two systems are fully integrated.
    We would like to create a transaction launcher transaction in CRM 7.0 that takes the user to Interaction History bsp page in CRM 6.0.  Is there a simple way to do this using transaction launcher?
    Best Regards,
    Tom Halloran

    Hi,
    You can use the transaction launcher and the transaction launcher profile, which is part of the IC WebClient profile, to start SAP GUI for HTML transactions via the Internet Transaction Server (ITS) from both Enterprise R/3, SAP CRM transactions from SAP CRM. Starting from CRM 4.0 Add-on, you can use transaction launcher to launch URL and front-office based transactions also.
    Agents have access to launch transactions from the IC WebClient navigation bar.
    In your case you can include the link for you CRM 6.0 from CRM 7.0 can be grouped under workcenter link group or direct link group of a navbarprofile.
    regards,
    Muralidhar Prasad.C

  • Transaction launcher in CRM Web IC

    Hi,
    We are trying to use transaction launcher in the WEB IC to call an R3 transaction. We have successfully managed in DEV and now we want to move across to QA for transport. But the handler class and config is done for DEV so far. In order to work this in QA, should we create/define the R3 QA system as logical system + RFC in our CRM Dev box and then transport ? Will it be required to be done for Prod as well then from dev?  is there any other recommended way of doing this.
    Regards,
    Vin

    Transaction Launcher handler class user mapped logical system to connect to R/3 environment.
    I dont think you can transport Logical System,RFC Connections from Dev to QA or QA to Prod.
    So before you start testing on QA,make sure that logical system for R/3 is already defined and RFC Connection is established.All you need to do is make sure that mapped logical system is created with the same name you have in DEV.To define the mapped logical system follow the path
    Easy Access->Interaction Center->Interaction Center WebClient->Administration->System Parameters->Defined Tx Launcher Log Sys and URL's.This is the easy way without changing your code in Handler Class.
    If you have already established a mapped logical system and you dont want to create another then you can do some code change in the below mentioned handler class methods
    1. CONSTRUCTOR.
    ** In the Constructor methos replace the OWNLOGSYS with 
      ** the available mapped logical system in your QA env
      property-name  =  
      cl_crm_ic_abox_constants=>mapped_logsys.
      property-value = 'OWNLOGSYS'. "#EC NOTEXT
      append property to gt_properties.
    2. CLASS_CONSTRUCTOR .
    ** In the Constructor methos replace the OWNLOGSYS with 
      ** the available mapped logical system in your QA env
      gv_mappedlogsys =
        'OWNLOGSYS'. "#EC NOTEXT
    3.GET_ACTION_DEFINITION .
    ** In the Constructor methos replace the OWNLOGSYS with 
      **the available mapped logical system in your QA env
       concatenate cl_crm_ic_abox_constants=>bor_action
                  'BUS1006005'  "#EC NO_TEXT
                  'EDIT'  "#EC NO_TEXT
                  'OWNLOGSYS'  "#EC NO_TEXT
             into rv_result.
    The same applicable for QA to Prod too.
    Hope this helps.
    Thirumala.

  • Transaction launcher for url in new window need "Back" to continue working

    Hello Experts,
    In the CRM I've created a Transaction Launcher for url, when I press on the link and open it in new window
    I got the following message:     "The object you have selected is starting in a new browser window. You can continue working normally in the current application. However, you may have to navigate back to the page you were working on. "
    how do I can still open the url ( which is BSP page)  in new window & can continue working with CRM without clicking on the Back button ?
    Thanks

    Have you solved the problem, Jamil?
    Hi Experts,
    I am also facing the same problem.
    The other possible solution I am thinking of calling the pop up window and then close the pop up.
    I don't know how can we call custom bsp page from view in pop up window. And then close the same pop up without asking user to click on any button.
    Thanks and Regards,

  • Open ERP transaction within CRM 2007 using wizard for transaction launcher

    Hello everybody,
    I am trying to launch a SAP ERP transaction within SAP CRM 2007 using the transaction launcher wizard.
    First I maintained all necessary setting for the RFC connections (in ERP and CRM) using for example transaction SM59 and BD87, e.g. the master data replication is working fine. Second I created a business object type based on the SAP Standard business object TSTC and set the u201CExecuteu201D method to u201CSynchronousu201D in SAP ERP.
    Afterwards I created the URL for our ITS server and started the transaction launcher in CRM. During the step u201CFurther technical detailsu201D I selected as transaction type u201CBOR transactionu201D and chose our logical system (ERP) and added our newly created BOR object type as well as the method u201CExecuteu201D. If I now press the u201CNextu201D button the error message u201CAn RFC destination could not be specified for the logical system XYu201D is shown.
    Any help is highly appreciated.
    Thanks lot and kind regards,
    Franziska

    Hi,
    The error you get is because the client you have mentioned for logical system mapping and the client in which you created the BOR object are not same.
    Remember, for sucessfull transaction Launcher Configurations,
    1) The client in which WEB UI Runs
    2) The Logical System mapping and client mentioned in ITS url
    3) The client is which you created the BOR object.
    4) The client on which you are configuring transaction launcher wizard
    ALL SHOULD BE THE SAME CLIENT, unless you are using the OWNLOGSYS concept for logical system mapping.
    For example,
    If my WEB UI is on client 200 of development system,
    then i must create TSTC based BOR in client 200 , Map logical system for client 200 and configure trnsaction launcher in client 200.
    In this approach, you cant transport the developments to other system and client ( like Quality and production system) , hence its advicible to create a logical system with name OWNLOGSYS. The name of logical system must be kept OWNLOGSYS in all the systems and clients so that then you can transport yout transaction launcher developments and the error you get now will not come. It its not possible to maintain the logical system with this name in all the system , then you will have to do as i mentioned in points 1 to 4.
    Hope this helps.
    Thanks & Regards,
    Suchita

  • CRM - Transaction Launcher

    Hi Guys,
    I'm trying to configure transaction launcher for transaction VA11 (ZDD_VA11).. I've done all the necessary settings but when I try to test it via Web client, it gives following error..
    Error:-
    Detail transaction ZDD_VA11 not defined.
    Detail Launch transction not defined.
    Execution not possible; error in launch transaction.
    Is there a report that needs to be run to convert the logical system correctly for the mapped logical system on the transaction launcher method? What is that report or program and how do I run that to over come that problem...
    Thanks,
    KP.

    Hi Gurus
    I am trying to configure URL on WEB UI thru transaction launcher in SAP CRM.
    I am getting the following errors
    Error within a launch transaction
    Launch transaction handler does not exist
    Launch transaction ZWEBPAGE not defined
    Launch transaction not defined
    Could please let me know where I went wrong .
    Thank you
    HK

  • Transaction Launcher in CRM 7.0 reverts back to CRM view.

    Hi Experts,
    I have configured all the necessary setting required for transaction launcher but still cannot launch it.
    The issue is when i launch it, it directs me to the logon screen of target system (ERP/ECC). Once i give my userid/psw, system thinks for couple of second and the system jumps back to CRM view.
    In my case, i'm using transaction launcher to launch VA31 (Scheduling agreement). On executing the launch transaction it is closed immediately and the system reverts back to account identification screen without any error message.
    I have created ZTSTC in ECC and checked "synchronous" for method "transaction.execute". Do i need to create ZTSTC in CRM as well?
    Thanks
    Shree

    Hi Shree,
    First, you don't need to create ZTSTC in R3/ECC. Create ZTSTC in CRM and make the method: ZTransaction.Execute - Synchronous. Then change the status to 'Released'.
    In R3, in /NSE80 create a Display Object, like "ZCUSTOM". In ZCUSTOM create a method. In your case create "ZVA31". In the ABAP tab of the method, check 'Transaction' and in the 'Name' field enter: VA31. Save and release this method and Object.
    Now, before you proceed with the next step of seting up SSO (Single Sign On) check if these notes have been followed:
    A) Maintain the settings for domain 'CRMD_CIC_ABOX_ITS_BASE_URL' in SE11 as per NOTE: 1337200.
    B) Maintain settings for logical systems as per Notes: 1337472 (For R3) and 1337200 (For CRM) logical systems.
    After this ensure that the URL for R3 ITS looks like this: http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
    Before creating R3/ECC Transaction launcher links - SSO certificates need to be setup by BASIS.
    a.     Import CRT certificate into target system (your CRM client) via Export/Import in STRUSTSSO2
    b.     Run SSO2 in target (CRM) and check green lights.
    c.     Maintain table TWPSSO2ACL and put in system and client (CRM, XXX)
    d.     Activate in SICF /sap/public/bc/its and also sap/bc/gui/sap/its
    e.     SE80 -> Internet Services.  Look for SYSTEM and WEBGUI and Publish them.
    Please try these and let me know if this works for you.
    Regards,
    Ramesh Nallabelli

  • URL Based Transaction Launcher not loading

    Hi All,
    There is a URL based transaction launcher configured to display a crm opportunity report.
    All the settings seem to be fine.
    The configuration is done correctly in the wizard.
    The URL is defined in view CRMV_IC_LTX_URL.
    The logical link and Traget are also specified correctly.
    the z handler class also gets called , but still the URL is not loading.
    There is no error, but just a blank screen.
    the system is CRM 5.2
    could it be any browser issues or issue with BW system or any other issue ?
    Could you please help me in finding the problem ?
    thank you somuch,
    regards,
    Pushpa

    Hello,
    If you are watching this thread, I have a typical requiremnt like yours.
    After creating the ITS URL id  , I do not want to put this on the Navigation Bar.
    But this lTS URL i want it as a link on one of the actiivty page. And also i should be able to pass parameter.
    Please sugget what and how to achieve this.
    Thanks,
    Jaya.

  • TRANSACTION LAUNCHER--CALLING CRM Z TRANSACTION THROUGH WEB UI

    As per the requirement, we are trying to call CRM  Z transaction through web UI. We have used the Object TSTC and created a replica of the object ZTSTC and used the method execute. Made the necessary config for navigation bar and Business role. We could see the link in the Navigation bar but the link could not call the transaction. Pls suggest.Do we need to take the object of the Transaction or copy TSTC and proceed. Thanks in advance.Points will be awarded

    PLS FIND THE DETAILS TO PROVIDE THE INPUTS
    Configure Transaction Launcher TO CALL T.CODE ZEGNM_IMG FROM CRM THROUGH WEB UI USING TRANSACTION LAUNCHER
    USED THE OBJECT ZTSTC BY COPYING TSTC OBJECT AND BY RELEASING THE OBJECT WITH METHOD EXECUTE
    PROVIDED THE T.CODE ZEGNM_IMG IN THE VALUE FIELD IN THE ABOVE SCREEN
    CREATED THE DIRECT LINK ZEGNM_K
    CREATED THE DIRECT LINK GROUP ZEGNM_K
    ASSIGN THE DIRECT LINK TO THE DIRECT LINK GROUP
    ASSIGN THE DIRECT LINK GROUP TO THE PROFILE TMFLEASING WITH POSITION 80
    IN THE BUSINESS ROLE CUSTOMIZING MADE THE DIRECT LINK GROUP VISIBLE
    AFTER MAKING THE ABOVE CONFIGURATION WE HAVE LAUNCHED THE WEB UI AND THE FOLLOWING ERROR IS SHOWING UP
    PLS FOLLOW THE ABOVE SCREENSHOTS AND PLS PROVIDE YOUR INPUTS TO ACHIEVE THE OBJECTIVE OF LAUCHING THE Z CRM GUI TRANSACTIONS USING TRANSACTION LAUCHER
    ALSO PLS FIND THE SCREENSHOT OF ITS
    URL OF ITS USED
    u201Chttp://crd.tmf.com:8003/sap/bc/bsp/sap/its/webgui?transaction=IC_LTX&okcode=ICEXECUTEu201D

Maybe you are looking for