CRM warranty products and related pricing

Dear Experts,
CRM 5.0
In our landscape, ECC is the leading system for product configuration and master data creation which then replicates into CRM. Now for a new business process we are planning to introduce warranties in CRM. I am aware of the standalone config for creating warranties in CRM but should the warranty products also be configured and created in ECC or can I go ahead and create them in CRM as we don't need the warranties to show in ECC.
Similarly, for pricing configuration, the leading system is ECC but we need to insert the pricing condition 1308 in CRM into the pricing procedure as it helps in warranty determination.
Could someone please advise how to achieve these?
Thanks
Ritwik

Hi Ritwik,
I am also facing the same issue where materials are created in ECC system and then the same need to be replicated to CRM, since I need to create the warranty products manually in CRM server, how do I link my ECC material and my warranty material created in CRM? Could you please advice with the help of examples and the transaction codes that you need to use,
Kind Regards
Atul

Similar Messages

Need Table related to Material product type and warranty product type

Hi all,
Can we get the table where for a given material product type, we can get related warranty product type.
Requirement is , we have to link the warranty products to related material product.We need to create a seperate table for material(with ibase) and its related some warranty products.
Suggest me what are the possibilities and process for doing in best way.
Thanks in advance,
B kumar.
Message was edited by:
b kumar

Please share how this is implemented.

How to use SAP RDE CRM Users products

Dear Experts
Am facing a issue when use SAP RDE CRM Users product as belows:
At this time, my customer running with ERP ERP 6.0 EHP4 in three
landscapce (server DEV, server TEST and server PROD)
And now, my customer want to use SAP RDE CRM Users product and they
bought SAP RDE CRM Users product & License from SAP
I have several question as follows:
Conditions necessary and sufficient to be able to install and run SAP
RDE CRM Users product ?
With a three landscape of my customer at this time -> Need more
hardware for the installation of SAP RDE CRM Users ?
SAP RDE CRM Users product is a Integration of ERP ?
SAP RDE CRM Users product can be installed as a component of ERP
system ? or SAP RDE CRM Users product is a standalone system ?
If a component of ERP -> how to install and use it
If a standalone system -> how to install and use it
Please guide me to know this issue
Thanks and best regards

Hi,
Can you give me information about crm rde if you got them??
Thanks in advance,
Frank

CRM 5.0 and Pricing

Hello Guys ,
I am creating a sales order in CRM and I am using CRM as standalone system.
I wanna test Pricing in CRM and I cant not. I maintained all necesary steps... maintained pricing determination and Created condit records.
VMC has been actived from SM52 ( Debugging switched off).
Product has required sales area assigned.
But I dont know why still my product wil not have price..
Please help me ... Thanks and regards,
Dinesh.

Dear Dinesh,
I believe you missed the following step:
Determine Pricing Procedures:
SAP Implementation Guide→Customer Relationship Management→Basic Functions→Pricing→Pricing in the Business Transaction -> Determine Pricing Procedure
Where you need mention the Sales Org, Dist Channel, Div, Cust pric. procedure and doc pric procedure and the pricing procedure that will be determined based on those criteria.
Pls let me know if that solves your problem.
Thanks,
Atin
Reward points, if it helps.

CRM Target Groups and Product Segments - BW and BPS settings

Hi gurus,
I have some questions regarding the CRM Target Groups and Product Segments as it relates to BW and BPS planning layouts.
1. When a target group is created in CRM, is it supposed to also be create master data entry for the object 0TGGRP_ID in BW? If it is, what kind of settings need to be made to ensure that? When we create target groups in our CRM instance, we donu2019t see the master data being updated for the 0TGGRP_ID info object.
2. Where exactly (in BW) is the relationship between the target group and the underlying customer/business partners stored/updated? We have a requirement to use target groups for defining the trade promotions and still being able to explode and plan on (individual) customers in the embedded BPS Planning layout. I believe that we need to have target group and associated customer assignments stored somewhere (?) in BW and use BPS characteristic relationships to populate all the possible combinations for a target group ID being passed from CRM. Am I correct in my assumptions? Any ideas if SAP has already delivered something similar in the BPS business content for TPM?
3. We are planning to use product segments to define the trade promotions as well. I believe BW info object is 0CP_SEGMENT. Similar to what I mentioned in Question 1, I donu2019t see any master data being updated for 0CP_SEGMENT. Am I looking at a wrong BW object or missing some key settings?
4. Where is the relationship between a Product Segment and the associated products stored/updated in BW? How do I create a trade promotion using a product segment and make the BPS planning layout populate individual products in the lead column?
Thank you for your help

Hi Anna,
After reading your post, what i understand is that there is no existing relationship present in CRM system between the Org BP and the contact person BP.
As per my Knowledge in order to create a Target group with Contact Persons you should have an active relationship persent in the CRM system bewteen the BP and the Contact person.Now as your sceanrio suggests that the Contact person's are present in the BW system but not in CRM, i would assume that the relationship also exsits in the BW . So if it does then your BW team should be able to help you in creating the necessary infocube with there analytical tools and you can then use there cube as the datasource and create the necessary Target Group with Contact persons.
Comming to the second part of your question, your guess is absolutely right but to give you more detailed infomation , the BP ID is converted in a unique GUID and this is passed into the program to retrive the necessary information from the BP after the campaign is executed.
Hope this helps!!
Regards,
Naveen

Difference between R/3 warranty and CRM warranty **

Hi colleges,
can any body explain me what is the difference between SAP R/3 Warranty and SAP CRM Warranty.
thanks in advance.
suneel

hi
differences are there in terms of
Condition Processing
Condition Technique
Condition Maintenance
Differences in Condition Processing
1. The source condition record cannot be displayed in SAP CRM for technical reasons, when processing conditions in a transaction.
2. Unlike SAP R/3, SAP CRM recognizes several pricing transactions. This enables you to compare pricing transactions. This can be useful after failed searches or price changes.
3. The pricing type cannot be predefined when starting a new pricing transaction in SAP CRM.
Differences in the Condition Technique
1. Data determination at access level cannot be executed in SAP CRM.
Differences in Condition Maintenance
1. It is not possible in SAP CRM to display condition records for predefined selection data in condition lists.
2. Mass copying of condition records is not possible in SAP CRM.
3. Change documents are not available in SAP CRM.
4. Archiving of pricing conditions is not possible in SAP CRM.
hope it will server ur purpose
best regards
ashish

Is therre drag and relate functionality in CRM 4.0 busi pack for sap 60.2

Is there drag and relate functionality in CRM 4.0 busi pack for sap 60.2 .
Rajendra redekar

Hi Sriram,
Mobile component changed to .Net in 5.0 so the first upgrade of support packages should not be a problem. Your only concern will be the rollout of the support package upgrade to the users in the field.
I don't know much about the upgrade from 4.0 to 7.0 and the complications around the custom code migration from vb to .net. I imagine this is something you may need to talk to SAP about.
Depending on the amount of work involved it may be easy to upgrade the CRM system and do a re-implementation of the mobile component.
Good luck.
Cheers
Andrew

Looking for a clone solution for Oracle WebCenter Content, Imaging and related products

Hi,
We are looking for a manual or automated cloning solution for Oracle WebCenter Content (UCM), Imaging (ICM) and related products. Oracle FMW has T2P cloning option, but we are looking for more specific to just this product to clone and configure (if needed). Any help is appreciated.
Best Regards

Hi
Assuming you have set up Purchasing with accrual method on receipt (and not on period end), you could enter the PO lines with receipt required. The receipt transactions you are uploading will generate the accounting to charge the expense accounts / or inventory valuation account.
There is no need to interface those also to Payables. In AP enter one invoice with the real monthly amount and match it to the purchase order level or to the receipts level. Approve and pay that invoice.
Dina

Difference between ERP products and CRM products .

Hi to all,
can u please answer to my question,the question is what is the difference between ERP products and CRM products .

Well, a google Search would result in some nice beginner Articles...
for eg:
http://www.lockergnome.com/nexus/technobabble/2005/02/14/the-abcs-of-erp-and-crm/
Cheers.

JoinFieldValue between Special Pricing Request and Special Pricing Product

Hi,
Can anyone please let me know if I want to Copy the Value of a Field in Special Pricing Product to a field in Special Pricing Request, is it possible? Does Join Field Value works between Special Pricing Requests and Special Pricing Products?
Example: In the Special Pricing Product, the External ID field is populated with the Value: AAPA-5WZD64 I want to copy this value to the External ID field in Special Pricing Request. Can this be done in any way, apart from web services?
Thanks

Hi Bob,
I have seen the thread.
Even though the SPR (Special Pricing Request) and SPP (Special Pricing Product) are the PRM Objects, in my case, the vanilla Object Partner is of least significance, in terms of the existance of a JoinFieldValue function between SPR and SPP.
Since this is not in the help file and also in Metalink/MOS, Can you please let me know if there is any way by which I can copy the value of a Field (External ID) in SPP to a corresponding Field (External ID) in SPR.
Thanks.

Can I become a sponsor, unbox your products and send them back to you describing on youtube to people what the pricing and availability are. Thank.

Can I become your sponsor on youtube? I can unbox your products, and give them back to you when I'm done. Thank You

The ASA doesn't really support EEM. Yes, there is a now a feature called EEM in 9.2, but it is quite limited compared to IOS. In IOS, what you want would be possible, but on the ASA, you'll need to do all of your CLI commands off box using something like Expect. I'm not sure how you're automating this now, but perhaps you are already using Expect. That would be what I'd likely do in this situation.

How to automatically update products and product categories?

Hi friends
How to automatically update products and product categories.Is it possible?
regards
venkat

Hi,
The delta load does not work for product categories but only products.So to bring in the new product categories into SRM you will need to start the load of the object DNL_CUST_PROD1 again.
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
Also refer the foll thread:
Material group from R/3 to COMM_CATEGORY (SRM)
Related notes : OSS notes 872819 and 720819.
BR,
Disha.
DO reward points for helpful answers.

Locking issue SAP CRM 4.0 and SAP R/3 ECC 5.0

Hi all, I have a problem that I would like to share before creating any OSS message. I have connected our CRM 4.0 environment to our new SAP R/3 ECC 5.0 environment and am faced with a strange problem. All middleware settings seem to be correct, business partners, products, pricing and all are replicated correctly. However when I create a sales document in CRM it gets replicated to R/3 correctly but it remains locked by my RFC user, preventing me from making changes to the replicated document. The BDoc status remains 'in process' and for some reason the lock is not being removed. Does anyone have seen a similar situation and how was it solved? Thanks, Tiest.

Tiest,
This problem may not only be applicable for the combination of CRM 4.0 and ECC 5.0, but for other combinations of CRM and R/3 backend systems as well.
I've bee facing the same problems with CRM 4.0 and R/3 4.70
First check your inbound and outbound queues in both CRM and ECC (Tcode SMQ1 and SMQ2). If no queues are 'hanging', then check the status of your BDoc's.
There are some good OSS notes that help you on these problems.
Hope this helps you...
Regards, Jacques

I need to re install creative cloud and related desktop application after hard disk formatting. Please advise?

My hard disk got reformatted recently, please advise how to re install creative cloud and related desktop application like LR & PS on the same machine.

Hello,
to reinstall CC shouldn't be a problem. You could download all the programs you need in the "try" Version from Adobe's download website. Because you have all needed serial numbers and so on, you can change your programs into "real" versions.
Maybe it'*s necessary, that you have to activate/deactivate pleae have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Good luck!
Hans-Günter

Why IPC uses CRM as database and not R/3 ?

Hi ,
can any one help me with an answer for the following question :
Why IPC uses CRM as database and not R/3 ?
Points will be rewarded for helpful answer
thanks
ritu

Hi
IPC have Sales Pricing Engine, Pricing Configuration engine and TTE which helps to maintain the similar R3 pricing settings. As you are aware pricing in R3 is determined by Sales area, Cupp, DPP, so IPC is capable of determining the Pricing using same R3 standard procedure. T
This is not available in CRM, so CRM needs IPC to undertake the determine pricing/ calculate the pricing of the products.
Regards
Nagarj

CRM warranty products and related pricing

Similar Messages

Maybe you are looking for