Crm webui login activation
dear experts
I have got access to SAP CRM IDES, now i am looking to activate SAP CRM Web UI , I had few of the research but I can,t make it, Kindly advice me the solution, I would be so thank full .
Thanks
Thanks Robert
I have tried, all the service are fine and activated but still the link doesn't work, is there any other way to resolve this problem
Similar Messages
-
Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEVDear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene -
We're experiencing frequent SAP CRM webui lags, and when this happens, the webui buttons suddenly stops working. (e.g. the user can no longer End the call).
SAP CRM webui works smoothly everyday. then after several days, usually in the morning, it suddenly hangs and stops working, after a few minutes and several log in/out attempts. the webui is up again.
Is there a way for us to isolate the cause? Do you any suggestion to help us identify the cause and eventually solved this issue?
As informed by our Network Admin, there is no significant lags in the network. therefore its not a network issue.
Thanks.Hi Harshit,
I forgot to mention, this happens simultaneously in 20 users of SAP CRM.
They were able to login in their CRM, take in calls then after while the CRM suddenly hangs and nobody from them can click the WebUI buttons.
Does this have something to do with Java VM?
Thanks,
Carol -
The work item linked to bsp application can not be executed in CRM webUI
Hi all,
1. i have configured workflow in SAP GUI. And i have linked one activity to bsp application(link to the task with bo WEBSERVICE and method PROCESSDIALOG).
2. When i start the workflow and click the workitem in workflow inbox, then the bsp page will pop up.
3. In CRM webUI, you can find all the workitems under CRM webUI worklist as the same as SAP GUI. And when i execute the workitem in webUI. a error appears as 'Dynamic navigation for object WEBSERVICE and action F not supported'.
In a word i want to link my customized bsp application with wokitem in CRM webUI .
any suggestion ? thsFrankly, I am not aware of CRMGUI but in general, the way we assign is
1. Initially we define a external service ( WF_EXTSRV).
2. Then by using that definiton we'll create a task.
3. The task created in the second step, we use in the workflow.
4. Now when ever any user tries to execute the workitem then it directly opens the BSP application.
Before doing all the above steps one should make sure that the service is ACTIVE in SICF txn, and what ever the parameters that are required to pass the BSP application must be defined in the WF_EXTSRV.
IF you want the workitem to appear in the UWL you need to register the task in SWFVISU txn with the visualization parameters APPLICATION. and the task as BSP standard application. -
Custom object in work flow not opening in CRM webui
Hi,
I have designed a workflow in SAP Ecc 6.0 CRM.
There are some work items and a single custom popup screen in this workflow.
This popup screen is used to get data and pass to the subsequent workitem.
This screen opens in SAP CRM in the workflow inbox (SBWP) , and works as expected.
Also, mails are sent to the SAP user IDs of the concerned people through the workflow (as per process).
At this stage, we have done all settings reqd in SWU3.
However, when this entire workflow process is trigerred using the CRM WEBUI, the following problems occur:
1) There are no mails received at any stage in the workflow inbox.
2) When the work item for the popup screen appears in the WebUI workflow inbox, and it is clicked, there is an error.
"Associated object cannot be opened. Contact your system administrator"
So, the customised pop-up does not open in this CRM WEBUI workflow inbox at all.
Question:
1) How do we ensure that the mails are received in the CRM WEBUI workflow inbox? Are there any settings to be done for that?
2) How can we make the custom popup open in the CRM WEBUI workflow inbox?
Regards,
SachinHi,
Please check IMG path.
The path CRM->Basic functions->Worklists->Define Alert Inbox and Workflow Inbox->Define Object-Specific Navigation
Input like
BOR Your_Object Your_Method BT_XXX OPEN
Hope it work.
Deripmav -
I can attach an image to SAP CRM WebUI but was not able to view it
Dear Experts,
I was trying to attach an image document to SAP CRM WebUI through cl_crm_documents (Method :- create_with_table) by passing the binary value.
I receive a string value for the image from IOS team and I convert the same to Xstring and binary in the code. And pass the binary value to the method "create_with_table".
And I could see the document gets attached. When I try to open the same. The image looks like a small cross bar(i.e :- As if we try to open an unsupported file format.) Though I tried passing both jpeg and png files.
On the other hand, when I try to attach the same image manually in WebUI. I could view the attached image perfectly. Please find the below code snippet I have used.
Help me out in getting it resolved.
CONCATENATE it_flup_gen2-or_img_faci_desc '.pdf' INTO ls_file_access_info-file_name.
* Convert string to Xstring value for FACI Image
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = it_flup_gen2-or_img_faci
mimetype = 'application/pdf'
IMPORTING
buffer = lv_faci_xstr
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc = 0.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = lv_faci_xstr
IMPORTING
output_length = lv_len
TABLES
binary_tab = lv_file_content_binary.
* Assign file properties
ls_file_access_info-file_size = lv_len.
ls_file_access_info-binary_flg = 'X'.
ls_file_access_info-file_name = ls_file_access_info-file_name.
ls_file_access_info-mimetype = 'application/pdf'.
APPEND ls_file_access_info TO lt_file_access_info.
* Assign business object
ls_business_object-instid = lv_guid.
ls_business_object-typeid = 'BUS2000125'.
ls_business_object-catid = 'BO'.
** Fill property values
** Get the unique name for the Attachment
ls_properties-name = skwfc_prop_relative_url.
ls_properties-value = it_flup_gen2-or_img_faci_desc.
APPEND ls_properties TO lt_properties.
** Get the decription and title
ls_properties-name = skwfc_prop_description.
ls_properties-value = it_flup_gen2-or_img_faci_desc.
APPEND ls_properties TO lt_properties.
** Get the document mime type
ls_properties-name = skwfc_prop_mime_type.
ls_properties-value = 'application/pdf'.
APPEND ls_properties TO lt_properties.
ls_properties-name = 'LANGUAGE'.
ls_properties-value = sy-langu.
APPEND ls_properties TO lt_properties.
ENDIF.
* Creating a document with provided data
CALL METHOD cl_crm_documents=>create_with_table
EXPORTING
business_object = ls_business_object
properties = lt_properties
file_access_info = lt_file_access_info
file_content_binary = lv_file_content_binary
raw_mode = 'X'
IMPORTING
loio = ls_loio
phio = ls_phio
error = ls_error.
IF ls_error IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
regards,
SabarinathanHi Deepika,
Thanks for the response. If you go through my code snippet I have given, I have already mentioned the mimetype as "application/pdf" for pdf document and used the same in my coding. It still doesnt help out.
regards,
Sabarinathan C -
BP telephone pulled out from another BP in CRM webui
Dear Experts:
When I created a bp through CRM webui 7.0, I maintained the general address info. and saved it. after that, I accessed the address details section by clicking on address assignment block in order to add the phone and email info. however, the fields had been already filled with the phone and email info. from another BP which I have created right before this BP. it should be blank before adding any data. It seems like the second BP's address detail view still pointed to that of the last BP I have created prior to this one. However, if I logoff from webui and logon back, it is blank and looks right. Is ther any advise?
ThanksHello,
Perhaps you could check if the BSP component view BP_ADDR/StandardAddress has been enhanced in your system. If so, see if the getter for TELEPHONE of the model node for BuilStandardAddress is available.
If this method has been enhanced, it is possible there is an error in the code. Possibly, casting the property access to an object of CL_CRM_BOL_ENTITY and calling the REREAD( ) method could solve your problem.
Kind regards,
Tom. -
Hi,
I am on CRM WEBUI. When I click on any of the buttons on WEBUI, after a while, it is showing a blank page, instead of required page. However if I click on back button, then it is showing the required page.
This is happening very sporadically. I am not able to undertstand the reason.
Could you please let me know, any settings I need to do to avoid this problem. (CRM Settings or Internet settings).
Thanks in advance for all the responses.
Thanks,
SandeepHello Sandeep,
Please have a look at note 1244321 which contains the general information on analysing WEBUI problems.
Please also try to get a HTTP trace of the problem which would be helpful on analysing.
There was the similar case which was caused by network.
Best regards,
Maggie -
I need to create a Notification in CRM WebUI When we create a new contract
Hi Experts,
I am working in Utility Industry and as per the business requirement I need to create a Notification in CRM WebUI
When we create a new contract & click on apply button.
As per my knowledge we are not maintaining Notification information in CRM System. So could you please
help me to call IW52 during the new contract creation when we click on apply button.
Thanks
RoliHello Roli,
If your requirement is to launch Transaction IW52 after clicking apply button then you can use Transaction Launcher tool in CRM to integrate to CRM WebClient UI.
Calling Transaction Launcher on user action
BOR object or ITS based Transaction Launcher
Regards,
Ashik -
Integrating WebDynpros to CRM WebUI - impossible?
Hello Experts,
My client is upgrading from PCUI (CRM 5.0) to WebUI (CRM 5.2). We have a WebDynpro (using ABAP) application that lists out sales orders for various customers. On clicking a Sales order #, the application used to pull up the PCUI view of the sales order. We would like to retain the WebDynpro and integrate it with the WebUI framework to accomplish the same functionality. (i.e to deploy the WebDynpro within the WebUI framework and have the ability to navigate in and out Sales order WebUI component from the WebDynpro).
My developers tell me that there is no simple means to integrate the WebDynpro to the WebUI framework and that we will have redevelop the entire application in WebUI from scratch. I find this hard to believe.
Is this experience or is there a pragmatic solution to integrate WebDynpros with WebUI? If so, what is the technical solution? I did search this forum and internet but could not find any answers so far.
Cheers,
Arun KHi Arun,
Not sure if this forum would fetch you the right answers.
But from what I have an understanding about how CRM 2007 works, it is a framework which is a combination of BSP layered on WebDynpro architecture. The idea is to have the flexibility of BSP and the power of WebDynpro.
Now one way to 'resue' the webdynpro application is to use the Navigation links in transaction CRMC_UI_NBLINKS. This should be possible since both these applications reside within the same ES repository and require the same authentication for access.
But by doing this, we loose out on the very essence of why we need to remodel applications using CRM WebUI. We would no longer be able to make use of the configuration capability provided by WebUI to render UIs. Thus you would not be able to harness the UI prowess of CRM WebUI in the screen that lists out the Sales Orders. But if that never was your intention in the first place, then you are good to go.
Once you are successful in associating the WD application via the URL launcher, you would still need to build the URL to navigate from the Sales order link to the the subsequent screen (whcih I believe would be the revamped screen from PCUI to WebUI) . This, in my opinion should not be difficult, since :
1) the navigation mechansims is similar in WebDynpro and CRM WebUI
2) There is a provision to build URLs using classes/methods provided in the CRM WebUI framework, I am unsure of the method/class names, but they do exist.
I would not vouch for everything that I have mentioned since its purely conceptual. I have just applied the concepts I am aware of in this situation.
But the bottom line is...Its not impossible and having to start from scratch is definetely an overstatement. However, the way to achieve it completely depends on the nature of your requirement. If deploying tha WD application within WebUI and navigation is the only concern, then it is definetely possible.
Best Regards,
Rashmi. -
How to create an appointment in crm webui?
hello experts!
i'm verymuch new to crm webui. would anybody please let me know how to create an appointment in crm web ui. even though i established a account and contact relationship in t-code BP in GUI. The error still pops up asking me to enter Sales organization,distribution channel and division.
regards
sanguineYou can follow chapter "3.1 Maintaining Organizational Data Profile" from best practices' building block ['C23: CRM Basic Sales'|http://help.sap.com/bp_crm70/BBLibrary/HTML/C23_EN_DE.htm]. For "Organizational Model Determin. Rule" instead of a rule 10000166 enter 10000194. It will determine org. data from current user.
Also take a look in near settings. There you can define your own rule.
Or check this thread Org Unit determination based on Emp Resp in Task which describes how to create profile for employee responsible. -
Hi,
Is there a simple Windows command I can use on a Windows server to find the latest login activity? I'm looking for something simple that will show me the list of users who have logged in and when. I originally tried the wmic command but it's
returning false positives. Unfortunately, I'm in a secured environment so the details of the infrastructure are unknown to me, i.e., I'm not going to be able to write Active Directory scripts or anything like that. I'm baffled that my online searches
for this issue aren't more fruitful! I would think there's some easy command that would show this information?
Any help or advice is greatly appreciated!
Thanks,
LBHi,
You can refer the following similar thread:
How to check AD users last log on time stamp?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/65f4b9f8-35a2-49bd-a9dd-617eced2ff04/how-to-check-ad-users-last-log-on-time-stamp?forum=winserverDS
The related KB:
Audit Account Logon Events
http://technet.microsoft.com/en-us/library/bb742435.aspx
More information:
Determine Last Logon Time for a User
http://gallery.technet.microsoft.com/scriptcenter/760c81d2-51c5-4fb1-909f-255949056308
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi Experts,
could you please tell me, if there are any issues with "Interactive PDF in CRM WEBUI".
and please tell me the exact difference between the static PDF and Interactive PDF.
Thankyou,
raghu.Hi,
Below 2 links will be useful for you:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2a8a0a37-0301-0010-f794-aecd1bb426e0#q-6
http://help.adobe.com/en_US/livecycle/8.2/static_dynamic_diffs.pdf
Thanks
Sunny -
Change Message Reporter in SolMan 7.1 Incident Management CRM WebUI
Hi,
i want to create a new Incident via the CRM WebUI (Role: Solmanpro). When I want to choose the message reporter i do not recieve all business partners via the search dialog. Only BP without the role employee are listed.
The search dialogue also says that you can only search for contacts and not for business partners. If a customer is entered in the field customer the search dialogue is prefilled with the bp numer of that customer.
How can I deactivate this function so that i can choose every BP as message reporter via the search dialogue?
Thank you in advance!!
kind Regards
SebastianBP Role contact person needs to be maintained!
-
Hi,
I have a question regarding CRM WebUI integration with WD ABAP.
My requirement is to trigger a particular CRM application (lets say, create quotation) from EP environment for a particular portal role, may be, from a WD application.
I searched in the sdn, and whatever threads i found was describing how to launch the complete CRM UI from portal.
Any pointers on how to trigger a single CRM application from a WD application?
Regards
SeshadriI'm not sure this is really a web dynpro abap question. Using the Portal APIs, Web Dynpro ABAP can trigger navigation to any navigation target configured in the Portal. Reading your question, I get the impression that you want to know how to setup a navigation target in the portal for a specific CRMUI application point. This seems more like a CRMUI or Portal question.
Maybe you are looking for
-
is there an extension that puts dates directly into google calendar from a website just by clicking on it ( the website), without having to put it in manually
-
Creating non-update tablespace
Hello! Is there a way to create an oracle tablespace that does not allow data to be updated, but only insert and delete? I would think it should be possible for datawarehouse-applications, where valid data are essential and not subject for updates. B
-
Content region color needs to be dynamic
I have a page that is composed of five regions: a top banner, a footer, a left navigation bar, and a portlet. The left navigation bar is next to the report and has 5% length (the report's region has 95%). The region has its own style which has a back
-
Form with six field types. Firefox sends only the first type. Safari sends all.
I use Ancestry.com. The 'advanced search' form has six data types - name, location, family member, etc, which are 'and'ed together. Starting about two weeks ago, the search function returned data from only the first data type, that is, if name and lo
-
Create BP relationship using BAPI_REL_CREATERELATION
Hi all, Do you know if it is possible to create relationships between two BPs using this FM ? In fact i'm searching a FM to create relationship in mass but i don't know if BAPI_REL_**** BAPI'S can be used for BP Thanks for your help !! Christophe