CRM Workflow Input box on Rejection of BP

Hello,
I created 2 Level Custom Workflow for a New BP Approval from CRM Screen.
In approval process, when the manager gets the screen for decision - Approval / Rejection, Once the
manager selects Reject and input box for mandatory rejection text is required.
I created an implicit enhancement for input box using FM 'POPUP_GET_VALUES', this works well in ERP ( SBWP). But no input box is displayed for input in CRM Screen.
Can some1 please help how to proceed ?
Thanks & Regards,
Narendra.

used "Create note" in the Workflow screen to get the rejection text.

Similar Messages

How to set an input box in an HTML Web Resource embedded in a CRM 2013 form

I have embedded an HTML web resource that contains some input boxes in a custom CRM form. In the CRM form I have created some fields that corresponds to the input boxes in the web resource and they are hidden.
The reason to do so was the limitation of the CRM not giving me the flexibility of the layout I was looking for. So basically, the user enters the data in the web resource and once saved they write to the hidden fields. On the other hand, when the form loads
the values from the hidden fields are copied into the web resource input boxes.
I am having a hard time setting those input boxes from the corresponding hidden fields on the form. I can read the crm fields easily using JavaScript. I can also get to the HTML web resource using the following:
var target = Xrm.Page.getControl("WebResource_CriticalPath").getObject(); I also appended the contentWindow.document to the end of this and it comes back not null but when I try to get to the HTML element which is the inputbox I am trying to set
the value to, I get a null reference. I am using:
target.getElementById('input20'); to get to the element. I know this is not supported and I have to use Xrm.Page but I cannot figure out how to do so.
Also, any advice on how to do the writing back (i.e. from the element to the form field) when the record is save would be helpful.
I really appreciate any comments/help in this regard.

Hello,
What I would suggest is try to do everything from your html webresource. Add following code to set you field's value during onload:
document.getElementById('input20').value = window.parent.Xrm.Page.getAttribute('hidden field id').getValue();
Add following code to onchange hanlder to put changes back:
window.parent.Xrm.Page.getAttribute('hidden field id').setValue(document.getElementById('input20').value);
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog

Input Box as workitem

Dear all
Is it possible to get user comment when your decision activity is used
Requirement:
user must enter his comment in an input box
before he makes his decision
is it possible to have input box in workitem if yes how??
Regards
Srinivasan V S

Hi Srinivasan,
I see you don't like searching, or reading the other posts in this forum. If you would have you would have seen When i reject form in workflow, how to add my own message This describes your requirement. Now you are waiting for an answer which is already there, what a waste of time.
Ok I will grant you there is a small difference in the requirement, because you want the user to enter the comment before his decision, but is this absolutely necessary?
Regards,
Martin

Getting an integer from an input box

the title pretty much covers it, i basically need to assign an integer value given from and input box to a variable.
i have search for example of this, but only found examples for returning strings, i tried to adapt it, but i couldnt figure it out.
can anyone please give me an exampel of a simple (very simple) input box that does this?
thank you

[http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html#inputVerification|http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html#inputVerification]
In the input verifier example there is a lot of code there to digest but really all it is doing is parsing the number in the field before the value of the field is updated. If there is a ParseException thrown then the user input is rejected and the value of the text field doesn't change.
You could implement this more simply by catching the ParseException and popping up the box again until the user types a valid entry.
e.g:
boolean validInput = false
while (!validInput) {
    try {
        //pop up and parse input msg etc
        validInput = true;
   catch (ParseException e) {
      //msg to user -> invalid input
}Obviously not as nice but it gets the job done. We'll call this the 300m Lorus solution.
Edited by: Edward_Kimber on Nov 23, 2008 8:22 AM

CRM Worklist: Everything you must know about CRM workflows !

Hello,
I created a wiki page which gives all information about CRM worklist. It gives more insights on how CRM workflows are little different from workflows in another systems, how do we migrate CRM workflows to higher versions like CRM 6.0 and CRM 7.0, what are the functionality differences between CRM 5.0 and CRM 7.0 in terms of workflows and much more !!
[CRM WebUI Worklist Wiki Page |http://wiki.sdn.sap.com/wiki/display/CRM/CRM7.0Worklist]
Regards,
Anand

Re: Everything you need to know about Foxtel Go
Iam book in to have foxtel install on 2nd of March was offered Thursday the 28 my appointment has been cancelled so can be home Thursday I put a complaint in as was told it was 1hour for change over from T Box but no one has got back to me

Conditional for a text input box NOT being null? Sorry for asking so many questions!

Okay, here's the situation. I'm creating a simulation of a form on which there are several text input boxes, 7 of which are mandatory fields. I know I can use a conditional to check whether the box has nothing in it by creating a null variable with no value and doing "if [box variable] is equal to [null variable] then", but the problem is that the validation captions I need to show need to be shown in order, that is to say that the caption for entering a value for the first box will always be shown if that box is null regardless of the contents of other boxes, the second will be shown if that one is null and the first one isn't etc.
When I was investigating this I noticed a post by Lilybiri saying that comparison with a null variable doesn't work for "not equal to" so I'm having a hard time figuring out how to show the captions based on priority. For example, to show the second caption I need to not only check whether the second box variable is null, but also whether the first one isn't.
It gets pretty crazy further along the line where I get to the 7th mandatory field and need to check whether the first, second, third, fourth, fifth and sixth boxes are NOT null and whether the 7th one IS. Help!
I did come up with one potential solution to this prior to posting: if I set a different advanced action for each input box losing focus which checks whether the variable is null and if so sets a "flag" variable to 0, and in the else set it to 1, I imagine I can then replace the "not equal to" with a check to that flag variable being equal to 1 (which means there is text in the box). I think this will work but I thought I'd check to see if there's an easier way first.

No it DOESN'T require everything to be on one slide. It just has to LOOK as if that's what it is.
I would suggest that it doesn't really matter how many Captivate slides are involved in the final solution, as long as it works the same way (or as close as possible) to the original software that you are simulating. Your users don't frankly know or care how you achieved the simulation. I guarantee they won't be thinking of you or Captivate.
In my experience, you can make creating elearning a lot more difficult than it needs to be in Captivate by trying to rebuild the app, rather than just simulating how it works. For example, thinking that if everything happened on one web page or screen in the app then it must also happen on a single slide in Captivate. The fact of the matter is IT DOESN'T need to work this way. And in some cases it might even be impossible to reproduce in Captivate this way.
So the quickest path to a solution is often to use multiple slides, which has the advantage of allowing you to "fix" certain things on screen (e.g. the contents of fields already visited) by using READ ONLY variable output in transparent captions, focusing only on one element of the interface that the user can interact with on that slide. It doesn't necessarily prevent you from moving back and forth between elements, just as you can in the original app. But it is far easier to create and maintain.
I'm not saying you wouldn't be able to pull this off on one slide in Captivate, but it is going to require a LOT of variables and Advanced Actions to build and debug. So the term Rapid Elearning becomes something of a misnomer if it takes you a long time to complete one slide.

Text input box for displaying notes

How can I use a text input box so delegates can write notes in which then appear on other pages as they work through the course.
Ken

It seems you would be able to do this with user variables, in which you store the content retrieved from the Text Entry Box. Later on (other slides) you can use this content by adding it to a Text Caption. Beware: I'm not sure about the amount of characters that can be stored.

Text input box to show in another text field

Hello,
I have a text input box (Text1) showing during a certain label on the stage. On another label there is another text field (Text2) that is not input-able. This second text field (Text2) should show whatever the user has inputted in the first text input field (Text1).
Both of these elements are not symbols and right now they are both text elements.
Does anyone know how to do this?
Thanks,
~iana~

I believe the inputField is set accordingly. And including your reply, here's what I've got on my stage:
sym.$("Name").attr('contentEditable', true);
var inputValue = sym.$("Name").value;
// other text
sym.$("Signature").html(inputValue);
Thus far, this does not work. "Name" field is Text1 (inputField) and the "Signature" is Text2 (text box)
I'm new to all this so I've prob got something wrong...do you know what I should adjust?

Text input boxes

How can I make text input boxes in a JApplet so I can specify there location. I want to make input boxes in certain locations on the applet.

Do you know about layout managers? If not:
http://java.sun.com/docs/books/tutorial/uiswing/layout/using.html
If you for some reason don't trust a layout manager to do the job for you, you can specify where you want to put things yourself by doing something like this:
JApplet applet = ...
applet.getContentPane().setLayout(null); // Do not use a Layout Manager (generally a Bad Idea)
JTextField input = new JTextField();
input.setBounds(50, 75, 25, 100); // Sets the position and size of your textfield
applet.getContentPane().add(input);This is generally not recommended though, because different screen resolutions, cross-platform issues, any other things, might screw things up for you.
ps.
A little advice: try to be a little more patient the next time. You shouldn't start flaming the forum just because no one happens to answer your question within an hour . The people here are under no obligation whatsoever to help you -- they do it of their own free will in their own spare time.

Text input boxes same colour as background - so "invisible", and button text or buttons often missingt

I have turned off all addons/extensions/plugins - still the same problem:
1: Text input boxes appear to be the same colour as the background - and hence "invisible"
2: Clickable buttons on websites are often invisible, or if they display have no text; e.g. button to right of google search ("go" button?) is seen as a plain box with no text - although button is clickable.
3: Google webpage usually has an image - this is missing, and merely has "UK" to the top left of the input box.
4: On this page for example I can see directly above this text box two vertical black lines - it appears to be a button with a pop-up "insert a link" - it can obviously be clicked when I mouse over it.

See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong

Allow the user to control the width of the edit forum post input box

I would like to control the width of of the edit-forum post input box. This could be:
automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
have a user global preference to set the preferred width
at least, allow the user to change the width via the change size icon. The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
Here is an example of an over extended right margin:
Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
Robert

Testing
Standard Reply box can be height adjusted but not width.
Same with Advanced Editor
No Adjustment at all in HTL Editor
Edit.
The Edit uses the Advanced Editor
Only Height Adjustment again.
I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
This may have been a post in the lounge.
It didn't actually try it at the time but have played with it since and have not seen it.
Maybe it is something they "Fixed" in both senses of the word.
Second edit.
I can't alter the box that currently reads "Message Edited by:- ..."
I also can't get this box to accept New lines (they appear in the box but don't post that way)
Corrected Spelling
9:51 PM Wednesday; May 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)
Message was edited by: Ralph Johns (UK)
and new line with a line space as well

How do I create an input box with a cancel button that will end a loop in my script?

I have been working on a script for my client and I am having trouble getting it to work properly. I stole most of the code from the PowerShell Tip of the Week "Creating a Custom Input Box". I also took someone's code for the Show-MessageBox function.
I have slightly modified the original code with two parameters and an additional text box. The first field is for an e-mail address and the second is for an employee number.
I need to know how I can get a Do Until loop to recognize when the cancel button is pushed and break the loop and effectively end the script. The work happens at the end but perhaps I need something added/modified in the InputBox function.
I want the script to check to see if anything has been entered in the second text box. If empty it displays a message and calls the InputBox function again. Then if there is something I use elseif to check to see if it matches my RegEx (digits only). If
it doesn't match it will loop and call the InputBox function again.
This all works fine. The problem I am having is that I cannot cancel out of the form. I'd like the loop to continue until the second box matches my RegEx or Cancel is clicked. Clicking cancel doesn't break the loop. I need to know how I can stop the loop
when cancel is pressed. I've seen Stack "Overflow: PowerShell Cancel Button Stop Script" but I don't think this will work in a loop.
Any help would be awesome. As a note, I DO NOT want to use the VB Interaction stuff.
function InputBox {
param ($Name,$EN)
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Text = "Data Entry Form"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
{$x=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
{$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click({$objForm.Close()})
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Employee Email Address:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
if ($Name) {
$objTextBox.Text = $Name
else {
$objTextBox.Text = "@domain.com"
$objLabel2 = New-Object System.Windows.Forms.Label
$objLabel2.Location = New-Object System.Drawing.Size(10,70)
$objLabel2.Size = New-Object System.Drawing.Size(280,20)
$objLabel2.Text = "Employee Number:"
$objForm.Controls.Add($objLabel2)
$objTextBox2 = New-Object System.Windows.Forms.TextBox
$objTextBox2.Location = New-Object System.Drawing.Size(10,90)
$objTextBox2.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Controls.Add($objTextBox2)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate()})
[void] $objForm.ShowDialog()
$Script:ButtonName = $objTextBox.Text
$script:ButtonEN =$objTextBox2.Text
$ButtonName; $ButtonEN
Function Show-MessageBox{
Param(
[Parameter(Mandatory=$True)][Alias('M')][String]$Msg,
[Parameter(Mandatory=$False)][Alias('T')][String]$Title = "",
[Parameter(Mandatory=$False)][Alias('OC')][Switch]$OkCancel,
[Parameter(Mandatory=$False)][Alias('OCI')][Switch]$AbortRetryIgnore,
[Parameter(Mandatory=$False)][Alias('YNC')][Switch]$YesNoCancel,
[Parameter(Mandatory=$False)][Alias('YN')][Switch]$YesNo,
[Parameter(Mandatory=$False)][Alias('RC')][Switch]$RetryCancel,
[Parameter(Mandatory=$False)][Alias('C')][Switch]$Critical,
[Parameter(Mandatory=$False)][Alias('Q')][Switch]$Question,
[Parameter(Mandatory=$False)][Alias('W')][Switch]$Warning,
[Parameter(Mandatory=$False)][Alias('I')][Switch]$Informational)
#Set Message Box Style
IF($OkCancel){$Type = 1}
Elseif($AbortRetryIgnore){$Type = 2}
Elseif($YesNoCancel){$Type = 3}
Elseif($YesNo){$Type = 4}
Elseif($RetryCancel){$Type = 5}
Else{$Type = 0}
#Set Message box Icon
If($Critical){$Icon = 16}
ElseIf($Question){$Icon = 32}
Elseif($Warning){$Icon = 48}
Elseif($Informational){$Icon = 64}
Else{$Icon = 0}
#Loads the WinForm Assembly, Out-Null hides the message while loading.
[System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") | Out-Null
#Display the message with input
$Answer = [System.Windows.Forms.MessageBox]::Show($MSG , $TITLE, $Type, $Icon)
#Return Answer
Return $Answer
$num = "^\d+$"
do {
if (!($ButtonEN)) {
Show-MessageBox -Msg "You must enter a numeric value for the employee number." -Title "Employee Number Missing" -Critical
InputBox -Name $ButtonName
elseif ($ButtonEN -notmatch $num) {
Show-MessageBox -Msg "The employee number must contain numbers only!" -Title "Non-numerical characters found" -Critical
InputBox -Name $ButtonName
until ( ($ButtonEN -match $num) -or (<this is where I want to be able to use the cancel button>)

Here is a simple validation method.
function New-InputBox{
param(
$EmailAddress='',
$EmployeeNumber=''
Add-Type -AssemblyName System.Windows.Forms
$Form=New-Object System.Windows.Forms.Form
$Form.Text='Data Entry Form'
$Form.Size='300,200'
$Form.StartPosition='CenterScreen'
$OKButton=New-Object System.Windows.Forms.Button
$OKButton.Location='75,120'
$OKButton.Size='75,23'
$OKButton.Text='OK'
$OKButton.DialogResult='Ok'
$OKButton.CausesValidation=$true
$Form.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text ='Cancel'
$CancelButton.DialogResult='Cancel'
$CancelButton.CausesValidation=$false
$Form.Controls.Add($CancelButton)
$Label1=New-Object System.Windows.Forms.Label
$Label1.Location='10,20'
$Label1.Size='280,20'
$Label1.Text='Employee Email Address:'
$Form.Controls.Add($Label1)
$TextBox1=New-Object System.Windows.Forms.TextBox
$TextBox1.Location='10,40'
$TextBox1.Size='260,20'
$textbox1.Name='EmailAddress'
$textbox1.Text=$EmailAddress
$Form.Controls.Add($textbox1)
$Label2=New-Object System.Windows.Forms.Label
$Label2.Location='10,70'
$Label2.Size='280,20'
$Label2.Text='Employee Number:'
$Form.Controls.Add($Label2)
$TextBox2=New-Object System.Windows.Forms.TextBox
$TextBox2.Location='10,90'
$TextBox2.Size='260,20'
$TextBox2.Name='EmployeeNumber'
$TextBox2.Text=$EmployeeNumber
$Form.Controls.Add($TextBox2)
$Form.AcceptButton=$OKButton
$Form.CancelButton=$CancelButton
$Form.Topmost = $True
$form1_FormClosing=[System.Windows.Forms.FormClosingEventHandler]{
if($Form.DialogResult -eq 'OK'){
if($textbox1.Text -eq ''){
[void][System.Windows.Forms.MessageBox]::Show('please enter an email address','Validation Error')
$_.Cancel=$true
}else{
# Check empno is all digits
if("$($TextBox2.Text)" -notmatch '^\d+$'){
[void][System.Windows.Forms.MessageBox]::Show('please enter a number "999999"','Validation Error')
$_.Cancel=$true
$form.add_FormClosing($form1_FormClosing)
$Form.Add_Shown({$Form.Activate()})
if($Form.ShowDialog() -eq 'Ok'){
# return the form contents
$Form
if($f=New-InputBox -EmailAddress [email protected]){
'Email is:{0} for Employee:{1}' -f $f.Controls['EmailAddress'].Text,$f.Controls['EmployeeNumber'].Text
}else{
Write-Host 'From cancelled!' -ForegroundColor red
¯\_(ツ)_/¯

How to print input boxes

I need to print a grant proposal that has several input boxes that are filled beyond the viewable area. When I print the document, Not all the inputed text is printed. I have tried using a smaller font but can't get it small enough to view all the text. So how does one print all the text with in an input box.
Running Adobe Reaser 9.4.3 on a Vista Laptop

Form your response, it seems that I will be unable to print the hidden text within the input boxes. But instead, have to print out seperate documents and include them with the printed Adobe Reader Document.

Very urgent: Doubts regarding CRM WORKFLOW OF BUSINESS PARTNER CREATION

HI ,
I HAVE DOUBTS REGARDING CRM WORKFLOW OF BUSINESS PARTNER CREATION, WHILE I AM CREATING BUSINESS PARTNER THROUGH R/3 , IT REFLECT IT INTO MYSAP CRM ALSO, AT THAT TIME IT SENDING THE MAIL TWICE TO THE RECEIPIENT. IS THERE ANY WAY THROUGH WHICH I CAN RESTRICT IT TO SEND THE MAIL ONLY ONCE,
PLZ SEND ME THE REPLY AS SOON AS POSSIBLE,
THANKS ADVANCED,

HI
WORKFLOW SEETING. SAP MAIL
MULTIPLE MAILS AND
ONLY ONCE CHOOSE
ONLY ONCE OPTION ON WHICH VERSION U R WORKING?
REWARD IF HELPFUL
VENKAT

How to set the default text in an input box or a label to be a predefine, multiline text

how to set the default text in an input box or a label to be a predefine, multiline text. In other words how to break the line in the code of a text box.
thank you

There are a couple of ways of doing this:
If you're editing on the canvas, press Shift + Enter.
If you're working in Express View (see lower right hand corner of Project Siena), you'll need to copy a hard return from another app such as Notepad.
I believe a better implementation of hard returns are in the list of requested functionality that you can find here:
https://social.technet.microsoft.com/Forums/en-US/2e1f9446-56b2-419a-9c17-7037d2cd6146/from-the-community-overview-of-requested-additional-functionality?forum=projectsiena
Thor

CRM Workflow Input box on Rejection of BP

Similar Messages

Maybe you are looking for