CRM2007 Webclient--where to assign the new BSP application.

Hello All,
I am very new to CRM2007 so please guide me here.I have created a new BSP application ZCRM_IC with new views and controllers as per the customer requirement.But I am not sure how to make it available for the customer when they log into webclient through their Role.
I dont want the customer to access the regular CRM_IC but they need to access ZCRM_IC application.
I would award <removed>
thanks,
Kitcha.
Edited by: Arun Varadarajan on Apr 7, 2009 3:40 PM

Hi,
Could you please following the below documentation to change the hostname or the IP Address depending upon the type of install :-
Changing Network Configurations
Sections :-
Table 8-1 Supported Procedures for Hostname, Domain Name, and IP Address Changes
8.2.1 Understanding the chgiphost Command.
Regards,
Prakash.

Similar Messages

Now I can't figure out how to assign the new tones to my contacts

I used the option "buy more" under ringtones on my iphone 5S. Now I can't figure out how to assign the new tones to my contacts. Help please!

Hello p618cg,
Congratulations on your new iPhone 5s! You can follow these steps to assign a ringtone to a contact:
Set a special ringtone for a contact.
In Contacts, choose a contact, tap Edit, then tap Ringtone. Select the ringtone you'd like to hear when that person calls.
iPhone Basics - Set a special ringtone for a contact
http://support.apple.com/kb/TI16
Thank you for using Apple Support Communities.
Best,
Sheila M.

CAN I ASSIGN THE NEW CHART OF DEPRECIATION????//

Hi dear AA experts,
I can not assign the new chart of dep to my company code.
It gives the message that YOU CAN NOT PROCESS COMPANY CODE XX, IT CONTAINS ASSETS
Rgds,
Venkata Raju

HI Paul Antony,
Thank you for ur response and for ur answer and Pl read below matter and give me the suggestion.
Actually Why I want to change the COD because
AA was implemented in the year 2005 but there were no of mistkes were done. they are
1) Recon ac not defined in GL ac
2) In legacy asset master data dep key defined as "0000"
3) from 2005 onwards users are making the transactions manually in F-02.
So I have taken this as challenge and I have done new configuration.
But I have done new Acc Det, Screen Layout, Asset Class, New GLs, Dep Kyesw.
When I run the depreciation for the year 2007in dev system for new assets it is asking to run the dep from 2005.
So If we assign the new COD, I think it will not ask to run the dep 2005.
So now without run the dep for 2005 can I run the new AA acquisitions (after maintain legacy data and GL master data)
Rgds,
Venkata Raju

Since last Sunday (October 6, 2013) I couldn't open the new downloaded applications. I saw it under app store, purchased section but couldn't open it. I am on ios7 now, is there some bugs regarding app store?

Since last Sunday (October 6,2013) i could not open the new downloaded
applications and could not re-install all my other applications. I am on ios7 now. Is there a bug in app store? Where will i report this? What is the email address of apple support?

If you are completely confident that you didn't hide it, then you purchased those with different apple id. If you completely confident that you purchases with same apple id then you have hidden it. One of the other or you are speaking about a miracle. While miracles are possible they are not very likely. Remember
Occam's razor?

How do I move a photo into an album in the new Photos application?

How do I move a photo into an album in the new Photos application?

The simplest way is to show the Sidebar at all times - you can reveal it with options-command-S ⌥⌘S.
With the sidebar visible, you can simply drag the photos from the Moments or other albums to the album in the sidebar. You can select and drag multiple photos at a time by selecting the first photo, holding down the shift key and selecting more photos. If the album does not yet exist, select the photos and press ⌘N for "File > New album" to create a new album with the selected photos.

FIRST TIME RUNNING THE DEFAULT BSP APPLICATION IN ABAP

Hi BSP experts,
        I am happy to see many people are solving the problems on BSP in sdn.
I am running the bsp application for the first time by taking the t-code se80 into consideration and executing the default bsp application given there.But I am getting the error   The URL http://nwrbcs:8000/sap/public/bsp/sap/system/login.htm was not called due to an error.The error is common as to all RABAX_STATE and in addressbar the address displayed is
http://nwrbcs:8000/sap/public/bsp/sap/system/login.htm?sap-url=%2fsap%2fbc%2fbsp%2fsap%2ftutorial_1%2fdefault%2ehtm&sap-ffield_b64=c2FwLXNlc3Npb25jbWQ9b3Blbg==.
Mainly my problem is i am not able to goto logon page.I am using the version Netweaver04 to run this application.Are there any special prerequisites to run a bsp application.I had donwe some settings in t-code SICF all services are activated(subservices also) and in path /default_host/sap/bc/bsp rightclick display service in handler list tab I added CL_HTTP_EXT_BSP. In RZ10 I added the parameter icm\host_name_full (as I am using workgroup instead of domain in my system) for instance profile.In t-code SCICM status is running.
If not clear with the above details I will send the screenshots of required t-codes and runtime errors to the mail-id immediately.
But I am not able to retrieve the problem.Is it necessary to check any kernel updates.I dont know more about that, I will send the required screenshots clearly to know all the details.I will send the trace file also if u need.It is very urgent for me to work on bsp but I cant.If u r familiar with particular version I will send that screenshots as I tried it in 4.7ee(R/3),ECC5.0(R/3) AND Netweaver04(abap).I am getting different errors in all the three versions.pls go through this and help me.
    Helpful answer will be rewarded unfailed.

you need to configure the FQDN. That is causing the issue in your case.
the URL shd start something like abc.mycompany.com:port_number...
Refer below thread & blog:
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-bsp-application-in-sap-netweaver-04-abap-edition--nsp
- step by steby link to configure the FQDN - Re: Unable to run any BSP application
Raja T

How to stop the new health application from Count the steps/ woking background?

how to stop the new health application from Count the steps/ woking background?
I really need your help

I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
     Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
     navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
     // they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

The scale in Maps follows your regional settings in System Preferences > Language & Region > Region.
Selecting United States, for example, will use English units (feet and statute miles).
There may be other methods I'm unaware of.

The new Photo application only goes to 50% after pushing the "Getting Started" button. Is there a work-a-round?

I've tried unsuccessfully to move over to the new Photos application. Every time I press the get started button it does well until it reaches 50%. There it hangs. I do have a large number of raw & jpg images in my pictures directory, but iPhoto seemed ok with it previously. I did leave it running over night and it was still at 50% the next morning. I am running on a 2011 MBP 17" running OS X 10.10.3. I have 400G of free space. I'm ok to throw away my old iPhoto library. I only used it for organizing. I use Adobe PS & LR for editing. I want to be able to do a similar thing with the new Photo Application. Timeline the photos, send them to iCloud and distribute them to my devices ... iPad, iPhone, iPod Touch

I've tried unsuccessfully to move over to the new Photos application. Every time I press the get started button it does well until it reaches 50%. There it hangs. I do have a large number of raw & jpg images in my pictures directory, but iPhoto seemed ok with it previously. I did leave it running over night and it was still at 50% the next morning. I am running on a 2011 MBP 17" running OS X 10.10.3. I have 400G of free space. I'm ok to throw away my old iPhoto library. I only used it for organizing. I use Adobe PS & LR for editing. I want to be able to do a similar thing with the new Photo Application. Timeline the photos, send them to iCloud and distribute them to my devices ... iPad, iPhone, iPod Touch

The new facebook application killed my pearl Dx other apps no longer working..

Ok, it's not completely dead but I just downloaded the new upgrade and as it was downloading I received SMS messages.
I let it complete the download, with the uninstalling and rebooting of the old version but then I couldn't find my new messages and the layout was weird and now I can no longer even access my SMS to check them old messages or send new ones and if I try to click on the SMS/MMS icon my cell freezes up.
Is it possible the new application is causing a glitch on my phone?
I can only assume it came from the update as the phone is barely 2 weeks old and I've never had a problem with it. Also the new facebook application runs extremely slowly.. I was wondering if there was a way to downgrade back to the older version? In hopes that maybe my Pearl will start working properly again.
Solved!
Go to Solution.

meishcreature wrote:
The SMS messages that I received while the upgrade was taking place.
You know how you get that little notification when you have new unread messages? well, I have that, it shows 3 new messages but when I go to click the sms/mms icon, there are no new unread messages there.
Hello,
there is an unread message somewhere but you do not look at the right place. Here is how to find that message.
Home Screen >> "Messages" application
menu >> search
leave everything empty except :
Search type: Local
Include Encrypted messages: Yes
Service: All Services
Folder: All Folders
Show: Sent and Received
Type: All
menu >> search
you will see messages. Mark them as read or delete them.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Attach a customized form to the std BSP application

Hi,
We have a requirement, to replace the std form linked to the std BSP application with the customized form.
We have replaced the form in the table V_SCENARIOHEAD, even though we are unable to see our customized form, still its showing the std form.
Would anyone give me a clue for the above problem.
Regards
Sirisha

No it is not possible to have one party fill the form and another contribute attachments. You might consider using two forms. One for the applicant and one for people submitting letters of recommendation. You would then have to correlate the two types of submission in a manual process.
Andrew

Question about the new notes application?

the new notes application is great but is there anyway to transfer the files off the ipod and view them in word or notepad on your computer as that would be a really useful feature.
cheers.

At this time the only option is to press the email button and send the Note to your email address.
Hopefully Note syncing will be included in a future update:
http://www.apple.com/feedback/ipodtouch.html
I and many others have already requested this update at the link above.
cheers
mrtotes

The new maps application doesn't work. I want Google Maps back!!!!

The new maps application doesn't work. I want Google Maps back!!!!
Most of the locations and search are not shown.
choose to go by bus is not working:(
I'm totally disappointed because of that.

Try doing a reset - hold down the sleep/wake button and the Home button together until the Apple logo appears, then let them go and allow the iPad to finish restarting. Then launch Safari and try to open a new tab.

Where to assign the relation type PRDBP in customizing.

Hi,
I am working in CIC0. In Accounts,I am searching an object with serial number .I will get a list of product ID's as search result. When I select one product ,In the Partner field i am getting a text as Partner not bound.
When I debugged the program,I found that system is checking the database table comm_il_prdbp for relationship type PRDBP.Since entry is not there in this table,this text is shown.Can anyone help me out by providing details of where to assign this relationship of partner and product in customizing.
Thanks in advance,
Gincy.

This relationship is assigned at the the category level in comm_heirarchy transaction..

I am using LR5.7.1 64 bit on CC I have downloaded LR6(CC) creative cloud is showing that it has been downloaded, but my LR5 has not updated to LR6 and I don't know where to find the new version or how I conect to it

I am using LR5.7.1 64 bit and I have downloaded the new LR6 (cc) my creative cloud folder is showing that LR6 is downloaded but I can't find it on my system, only my old LR5 Version, can anyone help me with solving this?

sign out from the creative cloud and then sign back in
Sign in, Sign out | Creative Cloud desktop app

CRM2007 Webclient--where to assign the new BSP application.

Similar Messages

Maybe you are looking for