CRM5.0: compating settings of one BOx vs Another

Tine and time again, we have an inconsistency between one system and another (ie: CRM test and CRM dev)
My question is: is there any "automated" way to compare two system settings (other than manually)
For example can we compare all the SPRO settings, compare the middle-ware settings, and other sap menu settings ?
Maybe there is an import/export tool we can use.
Also while we are at it, can settings be copied from one system to another (as far as i know, no).
This just seem very impractical and inconvenient, so I'm hoping there is some tool/report i don't know about.
Thank you for the help.

liaison1 wrote:
We are in the process of upgrading the box/storage. We need to duplicate the oracle home to the new server. Should I just copy the entire oracle home and run the libaray link command? no
If so, what is the command should I use and what is the procedure on that? This is the 10gR2 (10.2.0.4) Enterprise Edition with some patches applied.
Install the software again

Similar Messages

How can I migrate my junk-mail settings from one Mac to another?

I would like to move my junk mail settings from one Mac to another. I found this article (https://kb.siteground.com/how_to_synchronize_the_junk_email_settings_in_mac_mail /), but can't locate the file indicated in the article, so I suspect that the article is out of date (though it's not dated).
Both machines - MacOS 10.9.5; Mail 7.3.
Any insights much appreciated!
Best,
Doug

Make your user library visible and see if you can find it.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library.

How to transfer user settings from one account to another (on the same Mac)

I'd like to create separate user accounts for "work" and "play" (so that I can do things like have separate address books, etc...). However, I already have LOTS of personalized settings (trackpad behavior, login items, etc) that I'd like to keep the same between the two accounts.
Is there a way to transfer all of the user settings from one account to another?

You'll need to copy your /Home/Library folder. Make sure you back up first before doing the following. Log out of both your Work and Play accounts. Log in to a third account with administrator privileges. Assuming you are copying from the account called "work" to the account called "play", enter the following in Terminal:
sudo rm -rf ~play/Library (this deletes Play's Library folder.)
sudo cp -R ~work/Library ~play/Library (this copies Work's Library folder to Play's folder.)
sudo chown -R play ~play/Library (this fixes permissions of Play's new Library folder.)

How do you move Compressor 3.05 settings from one Mac to another?

How do you move settings from one Mac to another?
I have Compressor 3.05 installed on two Intel Macs: a MacPro tower and a MacBook Aluminum. I created a new setting on the MacBook, and can see it in Library -> App Support -> Compressor as "<name>.setting" Then I moved to the Mac Pro for speed and created a few more settings. I copied these settings from the Mac Pro libary and put them in the MacBook library; restarted Compressor on the MacBook but still cannot see those presets from within Compressor. I hate to re-create all those settings, but I do move between both computers depending on what I am doing.
What am I missing? Thanks.

To copy single settings.
1. Drag & Drop your setting from the Compressor Settings window to i.e. the desktop
2. Copy .setting file to an other Mac
3. Drag & Drop the .setting file(s) over to the Settings window in Compressor
To copy settings groups (folders)
1. Go to */Users/yourusername/Library/Application Support/Compressor*
2. Copy the settings group folder you want to your i.e. the desktop
3. Make sure Compressor is not open on the other Mac
4. Copy the settings group folder to the same location on the other Mac
5. Open Compressor
Hope this helps
Message was edited by: jeffd55

How to transfer printer settings from one Mac to another (both OSX)?

Hello, I have not found a detailed description on how to transfer printer settings from one Mac to another.
My issue is that I have a Mac G5 with 3 different settings saved as "presets" for the same printer. This works great, since the posters I print (on the large format printer) need different margins and different paper at times.
This G5 is basically retired and only used for printing. G5 has OSX 10.3.9
I have a MacPro as its replacement (OSX 10.4.11).
The MacPro has all my apps and other settings setup to my liking.
I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
If someone would list the steps needed to accomplish the transfer of printer settings or advise if this is possible, then I would be very grateful! The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
Thanks!

Hi SCChelpdesk, and a warm welcome to the forums!
I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
This is the File that holds that info on Tiger, not certain on Panther...
/Users/YourUserName/Library/Preferences/com.apple.print.custompresets.plist
After moving, you very well might have to change the Owner's Permissions within Get Info window, then log out/in.
I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
MA would transfer the info, but/and, if the user that had that info had the same Shortname as on the new one, it'll demand you give it a new Shortname to use... but then those settings would be transferred to that new user on the new machine. I think the 1st one will work though.
The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
We can go through that way if you like... not all that hard.

Can i copy my settings from one mac to another?

Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.

Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS.

How to move CRM_UI_FRAME component from one box to another box

Hi All,
Need help about this task.
Background:
- CRM Dev Box
- CRM QC Box
- CRM Prod Box
Problem:
- CRM_UI_FRAME component on the QC Box is not working properly. When we are going to the BSP Workbench, an error comes out that there is an unclosed tag; '>' or '/>' expected entity: "<<document>>" Offset : 0000003376 Error Severity: error.
- BSPWD_BASICS/WorkAreaHostViewSet is not loaded
- This problem never occurs on both Dev and Prod Box
Our Solution:
- To copy the whole CRM_UI_FRAME component from Dev to QC
Our Question
- Is the solution possible?
- If it is, how could we transfer/copy the whole CRM_UI_FRAME or any component from one box to another box
- Could we just attach this to a transport? Or is this a BASIS task?
- Other suggestions on how to do this?
Thanks in advance!
Regards,
Marc

Hi,
Please ensure to read note #[1540435 |http://service.sap.com/sap/support/notes/1540435]and to decide which update strategy/scenario you
need and in the "[SLD Planning Guide|http://www.sdn.sap.com/irj/sdn/nw-sld?rid=/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582]".
You should ensure that your CIM Model and CR Content on your SLD are updated as
per SAP note [669669 |http://service.sap.com/sap/support/notes/669669]on both SLDs.
Regards,
Aidan

How to transfer Lightroom settings from one catalog to another?

Lightroom 5. I have combined two catalogs into one "Master Catalog" per Julian Kosts tutorial ( http://tv.adobe.com/watch/adobe-evangelists-julieanne-kost/lr3-merging-individual-lightroo m-catalogs-into-a-master-catalog-/ ) without incident. However, my presets are not to be found. Could there be other issues? How Do I properly get these presets into my Master Catalog?
How to transfer Lightroom settings from one catalog to another?

Nevermind.
Per the turorials, this is suppose to occur automatically.
In the rare event that it does not, forced by lack of support through Adobe or the forums, I am relagated to resolve my problem the old fasjion way. Guessing at a solution of dragging and dropping (risking overwritting current the newer LR5 files (careful now).
I love the product but trying to get problem resolution here has been disapointing.
I'd like to retract this entire question session.

Can one 'copy' Shadow\Stroke settings from one graphic to another?

I'm always juggling hundreds of stills. I'd love to be able to just copy the Shadow settings from one still to another. Or to be able to 'lock' the setting so that they are all they same when applied to a set of stills.
Is something possible here?
Ben

Ben Low wrote:
I'm always juggling hundreds of stills. I'd love to be able to just copy the Shadow settings from one still to another. Or to be able to 'lock' the setting so that they are all they same when applied to a set of stills.
Is something possible here?
Yes:
- select your shape you want to use as a "style model"
- <pre>Format > Copy Graphic Style</pre>
- select all the shapes you want to apply the same graphical style to
- <pre>Format > Paste Graphic Style</pre>
You can also adopt it as a default graphical style forever:
- select your shape you want to use as a "style model"
- <pre>Format > Advanced > Define Default Shape Style</pre>
dan

Moving WCC cluster setup from one box to another box

We want to move the existing WCC (clustered) from one box to another box (both unix). We have the cluster/ folder {which have the folders cs/, vault/, weblayout/} on shared drive mounted in source machine running on 11.1.1.6.0.
We have installed the same installation in destination box. We want to follow the below steps to move the config., data from source to destination.
1) Stop servers in source.
2) Change the db details in weblogic console destination to source db.
3) Unmount the shared/ folder in source and mount it in destination box. (The vault, weblayout, cs folders will be mapped directly in destination ucm)
The other qns we have are
1) Are the above steps are correct and will WCC run without any problems.
2) Do the domain homes needs to be in sync (because the destination box is a fresh installation)
Just to test it, I have copied the cluster/cs/ folder from source to destination and the destination content servers are working fine. (I have not copied vault/ weblayout and changing the db)
I have seen a article on cloning WCC servers
Is it Possible to Clone Webcenter Content 11g ? (Doc ID 1507480.1)
It pointed to documentation http://docs.oracle.com/cd/E23943_01/core.1111/e10105/testprod.htm#ASADM11306
For target already exists, it just asked to migrate config. using CMU. Do I need to worry about domain homes or cluster/cs is enough to run WCC smoothly if they are in sync?
Thanks,
Narasa Kumar

Hi
Domain home contains information pertaining to weblogic and it's clustering configuration. Most of the WCC related config data will be residing in Oracle_ECM1 and ucm/cs folders. if the domain data changes from source to destination then there will be difference in behavior based on what changes are done in destination domain.
Differences/ changes in intradoc.cfg and config.cfg between 2 environments will have impact.
Better is publish your directory structure and then ask for Q and changes are that response might fit-in-better to your scenario.
Ideally, have same structure and configuration on destination and then perform movement of WCC. Run a sanity to confirm working use cases and then perform any changes to configuration or other things have you planned.
Thank you!

Copy lightroom 4.4 "default camera settings" from one computer to another?

Is it possible to copy my lightroom 4.4 "default camera settings" from one computer to another?

Quote "Are you saying that the settings are stored in the catalog."
I believe it is stored in the Preferences file. You can use presets to do the same thing as adjusting the "default develop settings", they are applied differently.
One is set in the Lightroom "Preferences" and one is applied by selecting a particular preset at import. I have not tried but since you can delete the preference file and Lightroom will rebuild one I am pretty sure you should be able to copy one from one computer to another.
Also you need to be aware that Lightroom applies noise reduction by default to your specific camera model and to the ISO setting. It does not display the actual settings.

How can i move settings from one user to another?

How do I move all settings and permiions from one user to another?

http://discussions.apple.com/thread.jspa?messageID=11320719&#11320719
http://discussions.apple.com/thread.jspa?messageID=12317222
http://discussions.apple.com/thread.jspa?messageID=6331229

Can you copy custom To Do List settings from one project to another?

Using RH9. We created a number of To Do List entries for one of our Robohelp projects that we now want to use in all of our RH projects (File > Project Settings > Manage To Do List for Robohelp Project). Is it possible to copy these entries from one project to another? Or do we need to re-create the list of To Do tasks for each one of our 20+ projects?

Hi there
The "To Do" list items appear to be stored directly in the ProjectName.XPJ file. So theoretically it would be possible to copy them by opening one XPJ using Windows Notepad, copying them, then opening the target XPJ and pasting. However, this will likely cause a disparity between the XPJ and the .CPD. So before actually opening the project where you are copying them into, you would want to close the project and delete the CPD. Then modify the XPJ and re-open the project. A fresh CPD should then be baked up and things should be in sync.
You might also want to submit a Wish Form to ask for an easier way to transfer custom lists. (link is always in my sig)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to move settings from one computer to another?

i'm going to be getting a new laptop -- how do i move all of my settings, bookmarks, etc. from one computer to another.
i've checked the help section - it talks about a profile -- i'm not sure i have that? can someone help -- 1 - set up a profilem and 2 - how to transfer it from one to the other --
thanks so much for your help

Yes - Firefox has a "profile". See these KB articles.
https://support.mozilla.org/en-US/kb/profiles-where-firefox-stores-user-data
https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles

Transfer Network settings from one machine to another?

I'd like to transfer my Network locations on my old PowerBook running Panther to my new one that's running Tiger. What files would I have to move over? Is there an easier way to export these settings and import them into the new machine?

You can use the Migration Assistant to bring over network settings from one Mac OS X installation to another. The transfer can be done through FireWire or from another drive connected directly to the computer.
(11309)

CRM5.0: compating settings of one BOx vs Another

Similar Messages

Maybe you are looking for