Crmd_ui_role_assing tcode is missing?

i had created business role....and i was looking further to create organizational model
i am able to create organizational unit, position
and now ii was stuck at business partner...
can anyone procedure with screen shots.....
and the issue is that crmd_ui_role_assing is not working in my ides...
please provide necessary steps to make it active

First of all you should check if you really need to use this concept (business role assignemnt via organizational model), because it requires quite a lot of maintnenance. The simplest way is tu assign business role in SU01 under parameters. there you can just assign parameter CRM_UI_PROFILE and in value you put the name of business role.
If you really want to use organizational assignemnt then the steps are the following.
- select your organizational unit
- in top menu select GoTo - Detail object - Enhanced object description
- in new window select infotype name called Business Role
- click on button New and enter business role that you want to assign
- save your work
Regards.

Similar Messages

Tcode for Missing number in sap

Hi Gurus,
Is there any tcode is available in standard SAP to get skipped or missing numbers.
Ex:suppose when creating an invoice, if any update interruption is happened then the system doesnt saves the invoice with that number and that number will be skipped from database.
Regards,
kishore.

Hello,
Use the transaction : S_ALR_87012342
In SD module, the gaps in invoice numbering may be caused normally due to two reasons:
update interruptions - the number is set in to the invoice at the
beginning of the program . If an interruption of the process happens after the assignation of this number, the number has run in the range and cannot be recovered. Update terminations in transaction VF01 and VF04. The billing document number is reserved prior to the update.
After a possible update termination, it cannot be used again.
Update terminations are displayed in transaction SM13. At present, there is no possible solution to this.
Object RV_BELEG is buffered. In this case the performance is improved but these gaps are produced.
Note 19050 provides details on why gaps occur, please also refer to the other attached notes for more info.
Prase

Bill of Exchange List TCode FBWE - Missing Bank Data

Hi...
We have an error when executing the Bill of Exchange List. The Bank Data has not been populated for one Doc. I think this is because there are two Bank Accounts defined in the Customer Master.
Question is.....is it possible to get the Bank Data into FBWE now, or will the Doc need cancelling? And also, if it is indeed cancelled, how can the problem be eradicated in the future for Customer Masters with multiple Bank Accounts?
Thanks...........

Dear Lolu jo
I have assigned the special gl account as you said but it is giving errors. I have defined accounts as follows :
Reconciliation account type k 100501 under sundry creditor
Alternative recon ac type k for boe payables K 100591 under sundry credito
Alternative recon account type k for statistical posting 200169 under current assets
In OBYM, for k s i have assigned 100501 and 100591
for automatic offsetting entry check/boe i have assinged ks : 200169.
for end user steps i am doing F-43, then when i am doing fbw6, system is giving error that sga ks account determination is missing.
Kindly inform me whereva I am wrong
Regards
keyin.12345

CU Tcodes name missing in the tree view

I have activated the Compatible Unit enhancement. However in the tcodes tree view, only tcodes are displayed. Name of the trasaction is not displayed.

Also posted [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=314463]

Authorization issue while executing F110 tcode

Dear All,
User is facing the proble while executing the tcode F110, user wants to change some payments, but does'nt have change option(pencil mark button is not appearing).
according to su53 screen shot analysis, fdkuser tcode is missing. this fdkuser is asssociated with all critical obects.
Kindly do the neeful.
Thanks & Regards,
Ganesh.

>
Jurjen Heeck wrote:
> > Recommendation is to do it in dev as it slows down the system performance.
>
> If you have production data in your DEV system, which is hardly ever the case, you can do that. I'd do it either in an up to date testsytem or in production. Running a trace on one user and only for authorization checks will not be too big a performance issue as long as you remember to stop the trace after the analysis is finished.
I agree. If a trace causes perceptible system performance degradation then it is undersized and likely to come to a standstill during financial closing etc.

P_ORIGIN authorization object.

Hi
We are encountering one problem in production.We have one role giving Authorization to PA51 and PA61 tcodes it is working fine and the user assigned to that role is able to execute those tcodes with the help of that role upto last month. Now he is not able to execute PA61 and even PA51 also . There is no changes transported to production for that role.
User is trying to create IT2005 records
SU53 screen is telling for P_ ORIGIN object
AUTHC = u2018Eu2019
INFTY = 2005
PERSA = <Dummy>
PERSG = <Dummy>
PERSK = <Dummy>
SUBTY = u2018u2019
VDSK1 = <Dummy>
Current authorization he is having for P_ORIGIN
AUTHC = M, R,W
INFTY = 2005
PERSA = JTCW
PERSG = *
PERSK = *
SUBTY = *
VDSK1 = ESS.
I am not even able to simulate in QA or in DEV the same error. In QA and DEV the role if working fine when assigned to some test ID. According to AUTHC he is having authorization for writing the record, but why system is looking for E.
I did usercomapre again, reset user buffer through SU53, still he is not able to execute.
Any idea on what to do? Any suggestions

Hi Bernhard,
Thanks for the input and sorry for not responding fast. Even I dont have access to production system as I am HR consultant. I will work according to your sugegstion with our Basis.
Just want to be clear, The role is working fine even last month also and user is able to enter overtime records of his staff . But this month When he tried to key in overtime records, system didnt allow him to do so.Even the header information of the staff when execute the PA61 tcode is missing. But when he keyed in his employee number he is able to see all the header information. But when trying to view his staff he is not able to see header information this month only. But Personnel number check authorization object is not included in the role. Any suggestions?
Thanks
Sasi.

Tcode for report: PO missed delivery date

Dear SAP Gurus,
Kindly let me know is there any T-code for report which list the purchase orders missed for delivery date.
Please help.
Regards,
Prashanth

Dear
your can your TCODE - ME2M.
Select Delivery Date field do the following step
1. click on Multiple selection Button
2. click on maintain selection option
3. select single value and click continue.
run the report. This may be useful to you.
Regards,
Pravin Kadam.

Use of 'Sub group text missing' tab in tcode ovt0/spro

Hi,
Can anybody please explain me what is the use of 'Subgroup text is missing' in tcode ovt0 . This tab is present in ECC 6.0 but not in 4.7.
The spro path for this is
sprosap referenceimglogistic generalbusinesspartner-customerscontroldefine account groups & field selection for customers d.click on groupd. click on company code data-d.click on W/holding tax data, w/h tax 2----
'Subgroup text is missing'.
Thanks in advance.

Hi,
subgroup is just listing the group fields available in the selected group.
In your case, it will list only
*W/hold.tax deduction,w/h tax 2
*Withholding tax code (2)
*Withholding tax number
*Withholding tax types
*Withholding tax country key
A double click on the "W/holding tax data, w/h tax 2" will do the same and show the field gruop settings
Hope this helps
Alain

Entry aids in (Assignment to Profitability Segment) Missing -TCode FEBA

Hi All,
When i am using the transaction Code FEBA to clear the customer account the entry aids (Assignment to Profitability Segment)
is missing. as the system takes FB05 in background of FEBA. But when i use Transaction code FB05 to clear the customer account the Entry aids is appearing on the screen.
Can some one let me k ow how the Entry aids Can be seen in the TCode Feba?

Hi,
I think in this case the transaction is processed by system in background as a batch-job.
I assume you are on release 5.0 or higher. Note 581739 should be part of the system. In this case for batch processing no more entry aids will be displayed, because in the new standard always all chararcteristics will be displayed and offered to be filled.
regards
Waman

Missing Codition Types at 2LIS_13_VDKON data source in RSA3 Tcode.

Dear All,
i am getting problam with 2LIS_13_VDKON data source in RSA3 Tcode.
When i am checking it, some condition types are missing.
i checked it condition types are active also.
and reloaded setup table.
Still same problam is coming .
please provide me your inputs.
Regards
SSMS

hello
How did you solve your problem. I m getting exactly same issue where some cond types (active) are missing.

SU53 - Tcode for offending transaction missing

Hello,
When an authorization error occurs (rel. 6.20), the data concerning the error are kept in SPA/GPA parameters. Transaction SU53 GETs the info and display it together with info from user-authorizaton. It's very nice, but we miss Tcode for the offending transaction. (In some cases Tcode is a part of error-msg, but we want the Tcode in all cases.)
The data is set by basis ('AUTH_CHECK_TCODE' and others), and here we cannot modify.
We are developing ZSU53 (copy of SU53) as a part of an authorization utility.
Have You any idea on how to get <u>the offending Tcode</u> in SU53 / ZSU53 ?
Can anyone understand why this is not included in standard SU53? It would be so easy to SET a new parameter with SY-TCODE in the right place ?
Regards Lars

"Can anyone understand why this is not included in standard SU53? It would be so easy to SET a new parameter with SY-TCODE in the right place ?"
I think your answer is simply that SAP expects you to speak to your users.
Issues of security should be handled on a case-by-case basis... not resolved through automation.
If you are cloning SU53, then you have your solution. You will need to store off sy-tcode.

Missing Payment Term field on tcode FBR2 Customer Invoice Display

Hi Experts,
This is a more detailed explanation on the Payment terms field issue we are encountering since last week.
I have some problems with their request that they want to show the payment terms field in the transation code FBR2 - Customer Invoice even if the Sales Area Data for Customer is not maintained but Company Code Payment Terms is maintained. I need help on the configuration on how to show the field.
What I researched is that there are 2 maintainance of Payment Terms Field:one in the Company Code and another in the Sales Area. As I read on some forums, the Payment Terms in Sales Area should be the default when using the SD Process however, the Payment Terms in the Company Code should be the default value when they use FBR2 - Customer Invoice. But thay still cannot see the payment terms field in the Accounting Document they already created.
I already checked in transaction OBC4 the Reconcilliation Account Group and the Payment Terms field is optional there and even the Posting Key 01, which is also optional.
Please help me on this. Thank you.

I did some checking on the past few posting, and I found some posting to the same account also the same tcode FBR2. However, the other one is with posting key 01 - Invoice.
The Problem occurs when we use FBR2 then the posting key is 09 - which is a special g/l posting for the account. How can I check why the "Payment Terms" field is still not displayed or cannot maintain in this transaction?

Layouts missing in the TCode : COOIS

Hi,
A user called us saying that the layout he was using to view production orders(TCode : COOIS) is not available in production system.The same layouts are existing in Pre-production system.
In order to track the issue,we tried with the TCode COHVOMPRINT in STAD to see who executed it from the last two days.But there is no clue.How do we trace the person who has deleted the existing layouts in the system.
Can anybody help me in this issue.
Regards,
Sudheer.

Hi,
If the pre-production system is in the same box try this.
Go to transaction COOIS execute the report and go to the icon where you select layout and click on Manage layout and it will open a new screen then try to import the layout by mentioning the layout .
If it is in a different box then select the layout in this screen and click on Layout > Transport and then you can move this to a different system.
Please let me know if this helps.
Regards
K.R

Miss created DIR in Tcode CV02N, CV03N.

Hi Gurus
I've created a DIR in Tcode CV01N.
When I press F4 in CV02N, I can't find this DIR. But I can copy Document Number of this to CV02N and I can view/change it. Or I can find it in Tcode CV04N.
I use a new Document Type and it is transferred from another server by request transferring.
With standard Document Type like FOL, I'm able to find DIRs.
Perhaps have something wrong in the configuration. But I compared it to some standard Document Type, nothing strange
Best Regards
An NLP

I forgot it a long time. When I checked, it worked. So strange... I don't know the reason of this case.
An NLP

Navigating from ME49 to ME47 tcode 'General object service' icon missing

Hi All ,
We have scenario wherein we are navigating from transaction ME49 to ME47 .
In ME47 'General Object Services' icon is missing .
When we direcly go to ME47 , it is working fine .
If any of you come across this issue , Pl.provide inputs .
Thanks in Advance,

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Crmd_ui_role_assing tcode is missing?

Similar Messages

Maybe you are looking for