Cronómetro

¿Sabe alguien cómo insertar un cronómetro en un clip de video, usando Adobe Premiere Pro, de manera parecida a las retransmisiones deportivas?
Ah, mi versión es la 7.0
Gracias anticipadas

Buen día,
Tomando en cuenta el ejemplo que se muestra en el otro foro, he realizado un pequeño programa que hace un conteo regresivo del tiempo que definamos. Podrías hacer las modificaciones para que responda a eventos, pero creo que la parte de convertir un número a digitos en un Led de 7 segmentos puede ser de gran utilidad para tu proyecto.
Saludos!
Omar I.
Applications Engineer
National Instruments
Adjuntos:
Digital Clock.zip ‏50 KB

Similar Messages

Problems with games and GeForce4 440

;(
I'm having very problems with games.
When I try to run a games
(Example: Medal of Honor) the PC dead.
I have Install last Nvidia drivers (44.03), last via Hyperion drivers (4.47) and Directx 9.0.
My Operating System is Windows 98 SE.
Some idea?
ZooTV
;( ;(

IRQ's List
0   Cronómetro del sistema
1   Teclado estándar de 101/102 teclas o MS Natural Keyboard
2   Controlador programable de interrupciones
3   Puerto de comunicaciones (COM2)
4   Puerto de comunicaciones (COM1)
5   Controladora de host universal VIA Tech 3038 PCI a USB
5   Studio PCTV (Audio)
5   Studio PCTV
5   Marcador de IRQ ACPI para manejo de IRQ PCI
6   Controlador estándar de disquetes
7   Diamond Sonic Impact S100 PCI AudioDrive
7   Controladora de host universal VIA Tech 3038 PCI a USB
7   Diamond Sonic Impact S100 Device Manager
7   Marcador de IRQ ACPI para manejo de IRQ PCI
8   Sistema CMOS/reloj en tiempo real
9   SCI IRQ utilizada por el bus ACPI
10   Compatible con MPU-401
11   VIA PCI 10/100Mb Fast Ethernet Adapter
11   VIA PCI to USB Enhanced Host Controller
11   Controladora de host universal VIA Tech 3038 PCI a USB
11   NVIDIA GeForce4 MX 440 with AGP8X
11   Marcador de IRQ ACPI para manejo de IRQ PCI
11   Marcador de IRQ ACPI para manejo de IRQ PCI
12   (libre)
13   Procesador de datos numéricos
14   Primary IDE controller (dual fifo)
14   VIA Bus Master PCI IDE Controller
15   Secondary IDE controller (dual fifo)
15   VIA Bus Master PCI IDE Controller
I am from Chile.
Thank for your help.

RX800XL is conflicting with my TV tuner

I have installed already, RX800XL first and then the theatre 550 pro card.
The point is that the TV tuner program (power cinema) does not work, It hang up just after clicking in the desktop icon.
I am thinking that maybe the problem is the range theatre chip on RX800XL is blocking the theatre 550 pro chip on the MSI theatre 550 pro card.
The TV tuner is fine I tested in an IBM desktop computer at my office and work well
I will format the HDD and install theatre 550 pro and see...
Somebody have another Idea, because if the format does not work I don't know what more will do.

Quote from: Glenn on 21-August-05, 09:13:44
I bet it was a challenge! That is good news at least partially.
Lets hope everything else works finally.
Please, I'd like to see what your IRQ list looks like.
I will post mine (from System Information) as an example of format only, you'll never get them as good as mine
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 5   WinFast TV2000 XP WDM Audio Capture   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   RADEON X800 XT Platinum Edition   OK
IRQ 17   WinFast TV2000 XP WDM Video Capture   OK
IRQ 18   Creative SB Audigy 2 ZS (WDM)   OK
IRQ 19   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 20   Standard Enhanced PCI to USB Host Controller   OK
IRQ 21   NVIDIA Network Bus Enumerator   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 23   Standard OpenHCD USB Host Controller   OK
Also, what slot did the Theatre card end up in?
IRQ 0   Cronómetro del sistema   OK
IRQ 1   Teclado estándar de 101/102 teclas o Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Dispositivo de infrarrojos integrado   OK
IRQ 4   Puerto de comunicaciones (COM1)   OK
IRQ 6   Controlador estándar de disquetes   OK
IRQ 8   Sistema CMOS/reloj en tiempo real   OK
IRQ 9   Sistema Microsoft compatible con ACPI   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 12   Mouse PS/2 de Microsoft   OK
IRQ 13   Procesador de datos numéricos   OK
IRQ 14   NVIDIA nForce4 Intel® Edition Parallel ATA Controller   OK
IRQ 15   NVIDIA nForce4 Intel® Edition Parallel ATA Controller   OK
IRQ 16   ATI RADEON X800 XL   OK
IRQ 16   Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller   OK
IRQ 17   Silicon Image SiI 3132 SATALink Controller   OK
IRQ 17   Sound Blaster Live! 24-bit   OK
IRQ 17   U.S. Robotics 56K Faxmodem Win 1806   OK
IRQ 18   Controladora de host VIA OHCI compatible con IEEE 1394   OK
IRQ 19   ATI Unified AVStream Driver   OK
IRQ 20   Controladora de host USB OpenHCD estándar   OK
IRQ 20   NVIDIA nForce4 Intel® Edition Serial ATA Controller   OK
IRQ 22   Controladora de host USB OpenHCD estándar   OK
IRQ 22   Controlador de host de PCI a USB mejorado   OK
IRQ 23   NVIDIA Network Bus Enumerator   OK
IRQ 23   NVIDIA nForce4 Intel® Edition Serial ATA Controller   OK

Metro Apps All Crash On Startup - I have read the other threads on this

UPDATE: I AM UPDATING THIS FIRST POST AS PEOPLE KEEP INCORRECTLY MARKING OUR ISSUE AS ANSWERED WHEN THEY HAVE NOT READ THE THREAD PROPERLY. AS SUCH I WILL START BY SAYING IF YOU ARE COMING HERE AND USING AVAST THEN YOUR SOLUTION WILL BE TO TURN OF THE BEHAVIOR SHIELD
FUNCTION. MORE INFO IS CONTAINED ELSEWHERE ONLINE ON THIS MATTER. THIS THREAD IS ABOUT DOMAIN USE OF METRO ON CLEAN INSTALLS WITH NO 3RD PARTY SOFTWARE. SORRY FOR THE CAPITALS BUT 5 TIMES HAVE PEOPLE MARKED AVAST AS THE ANSWER TO OUR PROBLEM WHEN IT IS NOT
EVEN INSTALLED AS DESCRIBED IN THE THREAD. I HAVE POSTED AN EXACT STEP BY STEP TO REPRODUCE MY PROBLEM LOWER DOWN
I know this question has been asked several times but there seems to be no-one that has a fix for it and it's becoming very frustrating.
I have installed windows 8 on my work computer as part of a test group to evaluate how the OS runs in our corporate space. The answer currently is not very well. The desktop side runs lovely but the whole metro experience is currently broken. This is the
same across all the people in our test group, not just my machine.
Scenario:
All users running windows 8 within our domain are unable to launch any metro (sorry - new style) application with the exception of PC settings.
I will describe how I set my machine up and the errors I receive.
The install is Windows 8 Pro that was a totally clean install. Installation went fine and very fast which was great. When required during setup I created a local Microsoft account - we wanted to see the experience for the majority of users who
do not have a live id. This all worked fine and everything worked as expected - including the metro apps.
Now that everything was up and working we joined the machine to the domain, this went fine and I was asked what local security level I would like the account to have - I selected administrator as I need to install all my software / dev tools etc.
After reboot I log into my domain account and start to install all my applications. I didn't retest metro apps at this point as it never crossed my mind that I would need to.
All normal desktop apps / programs installed I try to show a colleague the news metro app. The splash screen flashes up and bang straight back to the start screen. I proceeded to try every single other metro app and all have the same result, including
the store. Strangely they are all displaying notifications and updating the tiles.
So now I start to search the issue online looking at my event logs for clues to track it down. The following is what i find in the event viewer, I will use the store as an example:
Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
Under "Applications And Services Logs" --> "Microsoft" --> "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for
the Windows.Launch contract failed with error: The app didn't start."
I have tried the following to resolve this with no success:
Updated the registry as per a moderator suggestion on technet
Linked my domain account to my live id account
Tried changing permissions on C drive to allow all application packages full control
Install all latest updates
Tried to run from the local none domain account - same issue now occurs there
I am not willing to do a repair or re install after spending the best part of a day installing my programs and arranging my start menu too my desired layout. Also each user in our test group has the same issue with totally different software installed. The
only common item between the 5 systems is .net 3.5 has been installed in order to run a piece of custom software (a simple exe).
I need to try to find another spare machine to test if simply joining the domain is the root cause. If so this will surely be a big issue when it is actually release later this month as we do nothing special here in terms of our domain config. If it is something
to do with the domain Microsoft should be much more specific about what can and cant be done on the group policies if you want metro to run. There is no way we could roll this out to our users if as soon as they join our domain their entire start
screen stops working.
HELP!!!

Kevinio04,
We have been experiencing the same error in our environment; however today I have found a solution for this. I have included my theory too, as to why this was happening. Let me know if this solution works for you:
If you have recently installed Windows 8 Enterprise on a machine, put the machine on a domain and then used Active Directory credentials to log in, then you may have
experienced all Metro Apps to crash.
Theory for Metro apps crashing: Once the machine was put on the domain and an Active Directory user would log into the Windows 8 machine group policy kicked in (depending on what OU that machine was in). Group policy writes to the Windows registry;
therefore if you put that same machine in a different OU after previously being in a different OU, there are still traces of the previous group policy in the Windows registry. In summary, a new OU needs to be created in group policy specifically for
Windows 8 machines. The machines that are going to have Windows 8 installed on them, must start with a clean Windows 8 install. You can find details in the outline below:
GROUP POLICY CHANGES
Create a new Windows 8 OU with no policies enforced
Once that OU is created, create the following Policy:
Location of Policy: Computer Configuration / Policies / Windows Settings / Security Settings / Local Policies/Security Options / Audit: Audit the access of global system objects
This policy needs to be set to: Not Configured
Audit: Audit the access of global system objects
Default: Disabled
Description of this Policy
*This security setting determines whether to audit the access of global system objects. If this policy is enabled, it causes system objects, such as mutexes, events, semaphores and DOS devices, to be created with a default system access control list (SACL).
Only named objects are given a SACL; SACLs are not given to objects without names. If the Audit object access audit policy is also enabled, access to these system objects is audited.*
INSTALL WINDOWS 8 ENTERPRISE
Administer a clean install of Windows 8 on a machine
Create a local administrator account
Log in with the location admin account to put the machine on the domain
Do NOT log onto the machine with Active Directory credentials yet!
Put the machine in the new Windows 8 OU
Restart the machine
Now, log onto the machine with Active Directory credentials
TADA!

Eclipse helios Metro runtime

Hi,
I am trying to get Metro runtime in eclipse helios, but without success.
I have tried with oepe bundle and also with latest helios release and install glassfish tools bundle via Eclipse marketspace.
Any clue?
brg

Here are some instructions on accessing metro: http://metro.java.net/guide/Developing_with_Eclipse.html

Metro PCS 8530 No Longer Connects to Blackberry Servers

I have the Q10 which I love. Wife has a 8530 which she loves. She basically just wants voice, BBM, and email. It works great for her.
Her 8530 went wacked the other day. Phone turned on and worked fine except it would connect to nothing. We got Metro PCS foriegn support which was just wonderful (not). So mechanically the phone seemed to function fine but she couldn't make a call, get or send texts, etc.
Metro PCS says phones need to be reset sometimes (whatever). So they got "their end" working again. She can now call, do text messenging (not BBM), and get internet (not with the BB browser though).
Everything works for the most part but she no longer gets BBM or email through Blackberry.
Metro PCS says those are Blackberry issues and gave us a BB number to call. We haven't tried that yet.
The signal seems ok with all caps 1XEV. Also she CAN get email through BB and BBM when on WiFi.
For the most part I have a feeling Metro PCS is messed up. But I don't know enough about phones to back it up with Metro PCS. I also know with the TMobile merger they are phasing out CDMA phones but they are suppose to still work here in the metro Detroit area.
So anyone been through this? Any advice on how to proceed? She's planning on getting a new phone, but she doesn't really want one. She likes hers. If we can avoid that it would be great. Wouldn't mind ditching Metro PCS though. I still have my old 8530 from MetroPCS before I jumped to Sprint. I wonder if that might be useful to compare settings? I don't think she will pay the money for a BB this time either, she'll probably go as cheap as possible Anyway Halp! Thanks!

Is there another Blackberry forum?

How to find in Metro tube which service sent request to another service

Hi Guys,
I have following question regarding use of Metro tubes:
In SOA system composed of number of Web Services deployed on multiple GlassFish servers (with Metro container); I have a tube library which is loaded on start of GlassFish and for each request message sent by any servlet or Web Service to another Web Service needs to detect address of the destination service (that is the easy bit) and which servlet or Web Service sent the request (here is the problem). This information is not contained in the packet. I would expect it should be possible to find it in the context object ClientTubelineAssemblyContext and getContainer(), however, so far I have not found out how.
Any help will be appreciated
Petr

Check your emails, this number should be in the confirmation email, also call the level one phone support, they can find out that with the serial number of your computer, or your other private information, such as address etc.

Images not being displayed in metro apps

OS: Windows 8.1 enterprise
Images are not being displayed (a small cross mark shown on the left) when I open metro apps that I download from Store. The store as well doesn't show images. I am able to see images in some built in metro apps like travel and weather.
What's the fix. I guess the company network is blocking it. What is the work around?
Thanks.
NOTE: This is WINDOWS 8.1 METRO UI issue. It doesn't have anything to do with VISIO. The only option that I had to choose when i selected Windows 8.1 is VISIO. This site appears to be broken and not user friendly.

Hi,
Which metro app did you download and occur the issue? As you post the question in Visio forum, did you use Visio 2013 preview? As far as I know, the version had been off the store after the official version released.
If I misunderstand, please give me more information (Such as App name) or images about your question.
Regards,
George Zhao
TechNet Community Support

Settings (and other Apps) Will Not Start (Metro)

This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
Here's the details from the System event log:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          19-Jun-2014 09:21:53
Event ID:      10001
Task Category: None
Level:         Error
Keywords:      Classic
User:          SARSYS9\Michael Sargent
Computer:      SarSys9
Description:
Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
"15612"
Happened while starting this command:
"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
    <EventRecordID>546613</EventRecordID>
    <Correlation />
    <Execution ProcessID="972" ThreadID="4068" />
    <Channel>System</Channel>
    <Computer>SarSys9</Computer>
    <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
</System>
<EventData>
    <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param2">15612</Data>
    <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param4">Unavailable</Data>
    <Data Name="param5">Unavailable</Data>
</EventData>
</Event>
That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
Thanks,
    Mike

Please post questions and problems about using Windows in the Windows forums on
http://answers.microsoft.com
The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
--Rob

Portege M750 and Win8 - metro interface, and touchpad don't work

For those of you that, as myself, tryed to install windows 8 in a Toshiba Portege M750 and had problems in portrait tablet mode I recommend the following driver it works perfectly:
http://cdn.wacom.com/U/drivers/TabletPC/ISD_DualTouch_710-8.zip
The problem I had was that swipe didn't work with metro interface, and touch didn't work also and in portrait, strangely, when you touch the secren two arrows with different directions woul appear.
This driver solved my problem.
Hope that this can help...

Problem with wacom dual touch driver solved

Cron job not running - script uses rsync, ssh (with id_rsa)

Does anyone know how to get cron to run a rsync/ssh script which uses id_rsa for passwordless logins?
I have a backup script I have slaved for months over that works wonderfully when running it from the command line.
It uses rsync and connects with SSH (passwordless using ssh keys). I have setup id_rsa and id_rsa.pub for passwordless logins (this is my user account, and connects using root@ to the server)
As stated all works find when run from the command line. But when I setup a cron job to run this file (exact same line I run from the command line) it does not execute. Actually, it does run, as I have an email notifiction which sends to me. It is just the rsync/ssh part that does not run.
I have spent days and days trying to figure it out. No error messages occur, nothing. Took me a while to find out cron is emailing the user account on Lion the messages (not to a proper email address).
The error shows a permission denied, which I believe to be the cron user cannot use the id_rsa/ssh connection.
Cron is running the script as my user, the same I use on the command line. I even tried copying the id_rsa to the root user .ssh folder in case cron is running as root but that does not work either.
So does anyone know how to get cron to run this rsync/ssh script which used id_rsa for passwordless logins?
Thanks a lot

YES! Got it working, finally!
So the issue is indeed cron/launchd not being able to access the ssh-agent which holds the key.
So this is the solution...
Download keychain for Mac:
http://www.funtoo.org/wiki/Keychain
Then once its installed and configured, the script to run needs this added to the top:
eval `keychain --noask --eval id_rsa` || exit 1
Note I am using id_rsa whereas keychains instructions refer to id_dsa so I just changed it and it works OK.
When the script runs the first time it asks for the key password. Then it works from then on.
What I do not know yet is will I need to re-enter the password when I logoff/logon again. That will cause an issue as I auto restart the Mac every day which means if I am off for a few days backup will stop (can you see the madness in this issue!).

[SOLVED] Problem with cron and unison

I've got a very strange problem I cannot solve.
I have set unison to synchronize my laptop (mercure) against my home computer (jupiter). It works really fine.
I can run it from the terminal:
unison -batch CERTES
and it runs good.
I have set ssh keys so that id doesn't ask me for a password. And that runs fine too because if I do ssh to jupiter, I log in without any password.
That's what the unison profile looks like:
[jordi@mercure ~]$ cat .unison/CERTES.prf
root = /home/jordi/CERTES
root = ssh://[email protected]//home/jordi/Macbook
After this, everything is ok.
Then I set a cron job so this is done once an hour everyday using crontab -e:
0 * * * * /usr/bin/unison -batch CERTES
And every hour I receive this mail:
Contacting server...
Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,password).
Fatal error: Lost connection with the server
Ok then, this seems like cron can't log into jupiter with ssh as I thought. So I modify /etc/ssh/sshd_config to put this option:
PermitUserEnvironment yes
I do the same on mercure, even if I think it's useless, but...
I always receive the same error and I can't get the 2 folders synchronzed.
Before my hard drive crashed a week ago, I had unison running by cron and it was working nice, but now I'm unable to do it again...
Does anyone has a clue about what's happening and how to solve it?
Last edited by jcerdan (2008-07-04 09:52:00)

I have tried adding source to the crontab but I got the same error.
This is the env output from cron:
CONSOLE=/dev/console
SHELL=/bin/sh
CMDLINE=root=/dev/disk/by-uuid/25d2ee78-61ac-4b43-929a-28180b156786 ro
TERM=linux
rootdelay=0
USER=jordi
INIT_VERSION=sysvinit-2.86
ro=y
PATH=/bin:/usr/bin:/sbin:/usr/sbin
_=/usr/bin/env
RUNLEVEL=3
PWD=/home/jordi
PREVLEVEL=N
root=/dev/disk/by-uuid/25d2ee78-61ac-4b43-929a-28180b156786
SHLVL=3
HOME=/home/jordi
kinit_params= rootfstype=ext3 rootdelay=0
And this is the env output from the terminal:
[jordi@mercure ~]$ env
XDG_DATA_HOME=/home/jordi/.local/share
SHELL=/bin/bash
TERM=xterm
DESKTOP_STARTUP_ID=
HISTSIZE=1000
QT_XFT=true
GTK_RC_FILES=/etc/gtk/gtkrc:/home/jordi/.gtkrc-1.2-gnome2
WINDOWID=54526543
QTDIR=/opt/qt
GTK_MODULES=gnomebreakpad
USER=jordi
GNOME_KEYRING_SOCKET=/tmp/keyring-C1rLTl/socket
SSH_AUTH_SOCK=/tmp/keyring-C1rLTl/ssh
KDEDIR=/opt/kde
OOO_FORCE_DESKTOP=gnome
SESSION_MANAGER=local/mercure:/tmp/.ICE-unix/3449
USERNAME=jordi
MOZ_PLUGIN_PATH=/usr/lib/mozilla/plugins:/opt/mozilla/lib/plugins
XDG_CONFIG_DIRS=/etc/xdg:/opt/kde/etc/xdg
PATH=/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/opt/kde/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/opt/qt/bin
DESKTOP_SESSION=gnome
GDM_XSERVER_LOCATION=local
INPUTRC=/etc/inputrc
PWD=/home/jordi
JAVA_HOME=/opt/java/jre
LIBXCB_ALLOW_SLOPPY_LOCK=true
EDITOR=vi
LANG=es_ES.utf8
GNOME_KEYRING_PID=3448
GDM_LANG=es_ES.utf8
KDEDIRS=/opt/kde:/usr
PS1=[\u@\h \W]\$
PS3=>
GDMSESSION=gnome
PS2=>
HISTCONTROL=erasedups
SHLVL=1
HOME=/home/jordi
PS4=+
XDG_CONFIG_HOME=/home/jordi/.config
GNOME_DESKTOP_SESSION_ID=Default
XDG_CACHE_HOME=/home/jordi/.cache
LOGNAME=jordi
LESS=-R
CLASSPATH=:/opt/java/jre/lib
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-5ncgDqnWoO,guid=1e082c45cdb24be2d415016e486c820b
XDG_DATA_DIRS=/usr/share:/usr/local/share:/usr/local/share/:/usr/share/:/usr/share/gdm/:/opt/kde/share
PKG_CONFIG_PATH=:/opt/kde/lib/pkgconfig:/opt/qt/lib/pkgconfig
WINDOWPATH=7
DISPLAY=:0.0
J2REDIR=/opt/java/jre
G_BROKEN_FILENAMES=yes
COLORTERM=gnome-terminal
XAUTHORITY=/home/jordi/.Xauthority
_=/usr/bin/env
A lot of vars are different, but they refer to the Gnome environment. I can see that SHELL, TERM are different, but I don't know what can make the difference.
Do you think there's a problem there?

Welcome to the Metro Discussion

Welcome to the Cisco Networking Professionals Connection Service Provider Forum. This conversation will provide you the opportunity to discuss issues surrounding Metro. We encourage everyone to share their knowledge and start conversations on issues such as MAN, Metro IP, Metro Ethernet Switching, Metro Optical Transport, DPT, SDH/SONET, Gigabit Ethernet, WDM and any other topic concerning Metro.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
We encourage you to tell your fellow networking professionals about the site. If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]

Great to have a special forum for MARS !
Are there any best practices documents that would get me up to speed with customizing MARS to show more focused alerts? For instance until I've configured IPS events into MARS, syslog events from ASA/FWSM were not enough for MARS to conclude that a scan is being performed.
I tried to make a lot of "noise" with hacking tools such as Nessus across the firewalls w/o any special "Critical" level alerts.
Thanks,
Yigal

Keep getting error message from 'Cron Daemon'

I have been running an Xserve G4 with Mac OS X Server 10.3.9 as a mail server and web server for several years now with no problems. Recently, however, I tried to set up a mailing list, which I had never done before. When I tried doing this, OS X automatically created a mailing list called "Mailman" for me, in addition to the mailing list I created.
Now I keep getting error messages sent by "Cron Daemon <[email protected]>" to that "Mailman" mailing list. The error messages are sent to the mailing list and I get them as a subscriber to the list. They read:
====
From: [email protected]
Subject: [Mailman] Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/senddigests
Date: 6 mai 2006 12:00:00 HAA
To: [email protected]
Modules/gcmodule.c:215: failed assertion `gc->gc.gc_refs == GC_REACHABLE'
Mailman mailing list
[email protected]
http://www.mydomain.com/mailman/listinfo/mailman
===
I did some research on the OS X Server support pages and discussion forums and couldn't find any references to such a problem.
With a worldwide search with Google, I only found very obscure stuff about Python, which I know nothing about.
The mailing lists appear to be working fine other than that (and the fact that Mailman uses "www.mydomain.com" instead of just "mydomain.com").
Any help would be greatly appreciated.
Pierre

Thanks for the clarification. I really do not need anything fancy at this point. Also, please note that I am still using Server 10.3.9, not 10.4.
Now, as for the initial problem, I am afraid it is not gone. It has just changed. Here's what I got in my mailbox this morning:
===
From: [email protected]
Subject: Un envoi sur la liste Mailman à partir de [email protected] requiert une approbation
Date: 8 mai 2006 09:25:02 HAA
To: [email protected]
En tant qu'administrateur de liste, votre autorisation est nécessaire
pour l'envoi du message suivant vers la liste:
Liste: [email protected]
De: [email protected]
Objet: Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/gate_news
Raison: Envoi par un non-abonné sur une liste reservée aux abonnés
Quand vous le souhaitez, rendez-vous à:
http://www.mydomain.com/mailman/admindb/mailman
pour approuver ou rejeter la demande.
From: [email protected] (Cron Daemon)
Date: 8 mai 2006 09:25:01 HAA
To: [email protected]
Subject: Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/gate_news
Modules/gcmodule.c:215: failed assertion `gc->gc.gc_refs == GC_REACHABLE'
From: [email protected]
===
In other words, the error message is still coming, but now it's being sent by "[email protected]" and since this is not a subscriber to the list, I get the admin notice requiring approval. (It's in French because I am using mailman's French-language option, but you should get the gist of it .)
I still do not know:
1) what causes this message and what it means
2) why it's coming from "[email protected]" rather than "[email protected]".
Like I said, I changed the "host_name" option from "www.mydomain.com" to "mydomain.com" in both mailing lists I have, but obviously there is still some part of Mailman that thinks it should be using "www.mydomain.com".
I am afraid I still don't know what to do about this.
FWIW, I ran the check_perms command you gave me this morning and it did find 10 problems and corrected them. I don't know yet if this will help with this particular problem.

When I click on the Nightly Windows 8 Start Screen icon it opens the Firefox 18 on desktop, how do I open Nightly on Metro?

Nightly was working on metro at first when I haven't installed Firefox 18 yet but when I installed Firefox 18 and thought it would run on metro if I set it as a default program which did not, opening nightly both on the desktop and start screen would open the firefox in the desktop instead.
I uninstalled Nightly and downloaded and installed the version 20 for 32 bit. When I looked on the default programs to set Nightly all I could see is Nightly on the list but the icon has changed to that of Firefox's. I set it as default and still it doesn't open as metro.
Any ideas how to fix this?

This is because the regular central Nightly channel builds is only the desktop version. The version on Nightly development channel is at 21.0a1 now actually.
You need a build that has Metro support.
http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-elm/
Many users state they cannot get Metro version to work on 32-bit Windows anyways.
There is this running thread at mozillaZine about the Metro builds. http://forums.mozillazine.org/viewtopic.php?f=23&t=2304983

Cronómetro

Similar Messages

Maybe you are looking for