Crop and Resize photo within the COD service in ESS
Anyway to crop and resize photo within the COD webdynpro java component in ESS?
No what i mean is how to allow the user to upload a photo using the COD service but also allow them to crop and resize the image as documented here:
[How to Add Image Crop and Resize Capabilities in Web-Based Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10ab79a4-1fc2-2b10-29bb-ef9ff6771e72]
The solution above does not use the webdynpro COD service in ESS, it is a portal component with embedded JavaScript which also only stores the photo on portal only (not the infotype in ECC). I guess I need to figure out how to add these javascript files to the webdynpro COD service in ESS. Although I don't think Webdynpro Java allows you to add javascript.
Similar Messages
-
Cropping and Resizing Pictures in the Picture Motion Browser (PMB) software.
Solved!
Go to Solution.For complete information about cropping and resizing pictures, select the appropriate PMB version below.
PMB 5 or later
PMB 4.3 or older
NOTE: The links above take you to the PMB Support Web site. -
Not sure if this is a bug but it's frustrating! I'm using the
Mac version of Flash CS3. I set everything up correctly to crop a
video clip (dragging the sliders in the 'Crop and Resize' tab). I
then start the queue etc. The resulting flv has NOT cropped as I
specified?? I get strange sizes, distortions etc. This also happens
by direct import to the stage (embed or external).
Also I find that I need to check the 'Resize Video' check box
even if I don't want to resize the video to get Flash to import at
the correct size of the original! This renders the cropping tool
useless. Any ideas anyone?I've since done some tests. The issue appears to be related
to the source video and not the Flash Video Encoder, particularly
the compression format. I have a set of clips at the same size but
the compression formats are different (I checked the movie
properties in QuickTime). Sorenson versions seem to crop and resize
OK, but the DV format doesn't.
At least the Flash side of things are fine. -
I am scanning in many old photos and there are several photos on one page.... I read about a feature that was suppose to be available under adobe photo shop elements 13 that would allow multiple cropping under the file, automate, Crop And Straighten Photos....... the only thing that displays on the version 13 that I have is "Fit Image"...... which doesn't help me...... have they removed this tool or do you have to crop and save one image at a time? Thanks for your help?
You want Image>Divide Scanned Photos
-
Crop and Resize video in AME at the same time !
Hi everybody
I'm new to Adobe Media Encoder CS4, used to encode with Flash Video Encoder.
It seems that is it impossible with AME CS4 to crop and resize a video at the same time.
In input i have a 1280*720 video, that I first resize to obtain the desired height (300px)
so i obtain a 533*300 video,but when i would like to crop it in the same operation, that's not work, it doesn't keep the height i want (300px)
If I start by cropping my video, i obtain a 538*683 video, but i can't resize after, because the width and height in right panel are in grey, inaccessible.
In Flash Video Encoder (with Flash 8) it was possible to do this 2 operations at the same time, why doesn't this work in AME CS4 ?
(please excuse my poor english ^^)
Thanx by advance
Pierre-Alexismaybe you have outgrown or just need to look at the "pro" applications instead.
Other pro audio applications
https://discussions.apple.com/community/professional_applications/other_pro_audi o
http://www.apple.com/support/logicexpress/
http://www.apple.com/support/logicstudio/
http://www.apple.com/support/finalcutstudio/
At the least, check out their communities. -
Need to start JINI registrar instance from within the code
HI All,
I need to write JUnits for our app using JINI for which we need to start JINI registrar from within the code and then publish some services to it.
Any idea how we could be starting the JINI registrar from Java Code ? Any thoughts/suggestions/pointers would be highly appreciated.
Thanks in advance
VikramHi Senthil,
You can directly call the outer class method. Otherwise use the following way MyDialog.this.close(); (But there is no close() method in Dialog!!)
If this is not you expected, give me more details about problem.
(Siva E.) -
Cropping and resizing Images using Adobe Photoshop Elements 12
I am trying to edit pictures for my web site and previously used adobe photo shop 4 which I liked very well. When I try to crop and resize in photoshop 12 have been unable to adjust the images using pixels. As every photo on my website needs to be in pixels then this is a big problem for me! Is there anyway to change the preferences in the settings? Thanks Tess
You should head over to the Elements forums, this forum is for Photoshop. Go here : http://forums.adobe.com/community/photoshop_elements
-
Can I add or edit Keywords and captions from within the Map module?
I frequently find a need to edit or add to the caption while reviewing and geotagging photos in the Map module. Constantly toggling between modules is inconvenient. Is there a way to add/edit captions or keywords while working in the Map module (or view the map module while working in the Library?
Thanks!
Stevethank you
From: Modesto Vega <[email protected]>
To: Steve Murray <[email protected]>
Sent: Thursday, January 29, 2015 3:27 PM
Subject: Can I add or edit Keywords and captions from within the Map module?
Can I add or edit Keywords and captions from within the Map module?
created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?
Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu. I have an external hard drive that is set up to Time Machine. The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day. I then clicked "Restore Library" at the bottom right corner of the Time Machine screen. Roughly 2 hours later my iphoto was back to normal. When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend. I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library. Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed. Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto? If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above. Otherwise, good luck with your investigations. I'd be interested in hearing how you make out.
Karen -
How to save resized photo in the event
I am having trouble saving my resized photo in my event. When I open an event, choose the photo I want to resize, and use the export feature, I am unable to choose my event as a place to save to. Any suggestions. What I end up doing is saving it somewhere else I don't want to based on my limited choices in the drop down and moving it to the event. This is a hassle.
I also tried to resize the photo using the preview program and saving it to my event. THis way I at least got the option, but the saved file doesn't show up in the iphoto event, only in the finder when I view all of my photos.
Any suggestions. In a perfect world I just want to upload photos from my camera, iphoto creates an event which is great. and now I just want to resize them and have the original and the resized photo in the same event visible in iphoto. Is this possible?mpagriffin
Welcome to the Apple user discussion forums
If you want to have two different resolutions of a photo in iPhoto (and I can think of no reason to have this) you have to export the photo in the second resolution and import that new photo into iPhoto
You should never "save" anything into the iPhoto library - iPhoto is a database and you should never add or modify anything inside the iPhoto library
LN -
Crop And Straighten Photos - Changing parameters / Editing Script
Hi. I am currently using the Crop and Straighten Photos automation to crop scans of 10 to 12 maps that are scanned on a large flat bed scanner.
A lot of the plans have rough edges and aren't always completely square. Is it possible to allow a tolerance (eg. 5mm, or 20pixels etc) before cropping each image? I've tried editing a .jsx script that was submitted on this forum (the script was designed to crop more border from the image, as opposed to leaving more image) but this simply added a black border around my image as it enlarged the canvas side once the image had already been cropped.
Instead, I need the selection area to be increased prior to cropping.
Does anyone have an idea on whether I can get a script to do what I am looking for?
Furthermore, if two or more of the maps are joined at all by a hair or a frayed string of canvas from the map's backing then the Crop and Straighten Photos automation considers it to be one map and crops it as only one image. Is there a way of increasing this tolerance to make the cropping process more brutal so to speak?
Any help would be greatly appreciated.Hi Christoph.
I'd realised that once i made the post, and yes, the duplicate and flatten parts in the process are unnecessary, they have been removed. The action is set up now so that once it crops the individual images, it closes the main image down, and then saves and closes the individual images. It is setup to save and close 12 images (as this is the most there will ever be in my case), and I set the action to post errors to a log rather than halt, so if there are less than 12 files it will continue and just post an error in the file. It works really well now thanks!!
I then run an action that options each individual file and brings up the "save as" dialog. This is a chance to perform a QA on the image and to save it as the correct name on the plan.
However, the action is currently setup so that it creates a complete new image each time and closes the original. This is the only way I can make the "Save as" dialog point to the new destination as if I simply open and "save as" the original files, the default folder always resets back to the original folder where the cropped images are. I'll have to investigate other methods of opening and renaming the images to help speed this part of the process up.
Thanks so much for your effecient responses. They have been a great help!
Cheers. -
Hi,
I have another problem - after upgrade ios wirelles connection not work.
After reload i have :
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
STP: Unable to get the port parameters.
Please configure the bridge group on this interface first.
Please configure the bridge group on this interface first.
Please configure the bridge group on this interface first.
SETUP: new interface NVI0 placed in "shutdown" state
my old configuration work propertly in the old software, but after update i have notificatio.
Old thread:
https://supportforums.cisco.com/discussion/12379491/cisco-877w-no-wireless-connection
my current sh run:
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname cisco
boot-start-marker
boot system flash:c870-advipservicesk9-mz.124-24.T6.bin
boot-end-marker
logging message-counter syslog
logging buffered 4096 informational
enable secret 5 $1$eCNp$rWuBfZ/cexnwnkm7L447s.
aaa new-model
aaa session-id common
dot11 syslog
dot11 ssid ciscowifi
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 050D031D26595D0617
dot11 wpa handshake timeout 500
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.56.1
ip dhcp pool CLIENT
import all
network 192.168.56.0 255.255.255.0
default-router 192.168.56.1
dns-server 8.8.8.8 194.204.159.1 194.204.152.34
lease 0 2
ip cef
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
username marek password 7 00121A0908500A
archive
log config
hidekeys
ip tcp path-mtu-discovery
bridge irb
interface ATM0
description Polaczenie ADSL do ISP$ES_WAN$
no ip address
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
hold-queue 224 in
interface FastEthernet0
description Edzia
interface FastEthernet1
description dom
interface FastEthernet2
description Dziadek
interface FastEthernet3
interface Dot11Radio0
no ip address
no ip redirects
ip local-proxy-arp
ip nat inside
ip virtual-reassembly
no dot11 extension aironet
encryption vlan 1 mode ciphers tkip
encryption mode ciphers aes-ccm tkip
broadcast-key change 3600
ssid ciscowifi
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
world-mode dot11d country AU indoor
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
description ciscowifi
encapsulation dot1Q 1 native
no cdp enable
interface Vlan1
no ip address
bridge-group 1
interface Dialer0
description Interfejs dzwoniacy
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp chap hostname [email protected]
ppp chap password 7 xxxxxxxxxxxxxxxxxxxxxx
interface BVI1
description Polaczenie dla sieci LAN
ip address 192.168.56.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
ip nat inside source list 100 interface Dialer0 overload
ip nat inside source static tcp 192.168.56.10 80 interface Dialer0 80
ip nat inside source static tcp 192.168.56.10 22 interface Dialer0 22
logging trap debugging
logging 192.168.56.10
access-list 100 permit ip 192.168.56.0 0.0.0.255 any
access-list 100 deny ip any any
no cdp run
snmp-server community ciskacz RO
snmp-server chassis-id ciskacz
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
exec-timeout 0 0
transport preferred ssh
transport input ssh
scheduler max-task-time 5000
end
please help - thanks!Hello Marek,
I suppose you are not planning to do any kinds of advanced config using several VLANs and multiple SSIDs so let's just make your configuration simple and working.
In short, you need to remove all references to VLAN 1 and to any subinterfaces possibly related to the VLAN 1. This means in particular (follow these steps in sequence):
Remove the Dot11Radio0.1 subinterface entirely
In the Dot11Radio0 section, remove the encryption vlan 1 mode ciphers tkip command
In the dot11 ssid ciscowifi section, remove the vlan 1 command
After performing these steps, make sure that the ssid ciscowifi and encryption mode commands are still present in the Dot11Radio0 configuration, and if not, reenter them.
Best regards,
Peter -
How to crop and sharpen photos
Where do I find information on cropping and sharpening photos that I want to use on projects? Thanks for your help.
Those functions are usually included with your software to provide those functions. It should have a full help facility.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Crop and Straighten Photos in CS6
I open a 8"x10" jpeg or any other photo then go over to FILE menu and drop down to AUTOMATE then over to CROP and STRAIGHTEN PHOTO,S
Now what happens is that three other copies appear copy ,copy 2 copy 3 .
My original is OK at 8"x10" followed by the copy being 5"X7" then copy2 is about 1/2"x2" and copy 3 is about 3/4"x3/4"
I think this is being caused by interaction with CS5 as the same happens there.
CS4 is all OK this not being affected.
Now in CS4 i can crop and straighten but in CS5 and CS6 nothing can be done.
KipOK, here's the scoop: the feature in File>automate>crop and straighten is designed for those who scan in several photos with white space between them. It will make it's best attempt at separating each photograph by looking for the white space around them. It will then crop each photo to the edges it determines and make each straight based on the detected edge.
It is not designed to straighten the image in a photo. If you run this on a photograph, it is looking really hard for white space and will make its best attempt to separate what it thinks are independent items or photos and save each to a file.
If you want to straighten an image, go to the ruler tool and draw a line and choose straighten layer to get a rotation only, or go to the crop tool and select straighten, and draw a line that you wish to be the horizontal. This one will crop also.
I hope that clears up the issue.
Pattie -
Scripting and Crop and Straighten photos
photoshop CS3 has this neat feature "Crop and Straighten photos" which is very helpful in cleaning up scanned images (remove the black border) but is there a way to turn it into an action ?
i would like to apply this against many images (lots of files) in an automated way but being new to scripts/actions, I haven't had much success since this command creates a copy of the original.
is there an action that will help me batch remove the black border from all my images either using this CS3 command or another. thanksOK, I'm giving back: here's an adaptation of Paul's script that uses recursion to iterate through all subdirectories. (Note that I also changed the file name suffix to a "static" (non-sequenced) value, as well as the name of the output folder, since I am using this to process single-photo image files. The original lines are commented out.) To implement the recursion, I defined the "main" functionality in a function ("ProcessFiles") that calls itself when encountering a subfolder.
Here's the full script. Hope this helps someone!
===========================
// Prompts the user for a directory, and then recursively processes each image
// in that directory and all subdirectories by executing the "Crop and
// Straighten" command. Images are saved with a specified suffix in a
// designated subfolder.
// Adapted from a script provided by "Paul R." in the "Photoshop Scripting" forum
// http://www.adobeforums.com/webx?7@@.59b54905/2
// TIP: Hold down the "Alt" key while running this script to instruct Photoshop
// to treat the image as a single photo. (For more information, see:
// http://livedocs.adobe.com/en_US/Photoshop/10.0/help.html?content=WSfd1234e1c4b69f30ea53e4 1001031ab64-762e.html)
#target Photoshop
app.bringToFront;
var inputFolder = Folder.selectDialog("Please select folder to process");
if(inputFolder != null){
ProcessFiles(inputFolder);
function ProcessFiles(inFolder) {
// var fileList = inFolder.getFiles(/\.(jpg|tif||psd|)$/i);
var fileList = inFolder.getFiles();
var outfolder = new Folder(decodeURI(inFolder) + "/Cropped");
if (outfolder.exists == false) outfolder.create();
for(var a = 0 ;a < fileList.length; a++){
if(fileList[a] instanceof File && fileList[a].name.match(/\.(jpg|tif||psd|)$/i)){
var doc= open(fileList[a]);
doc.flatten();
var docname = fileList[a].name.slice(0,-4);
CropStraighten();
doc.close(SaveOptions.DONOTSAVECHANGES);
var count = 1;
while(app.documents.length){
// var saveFile = new File(decodeURI(outfolder) + "/" + docname +"#"+ zeroPad(count,3) + ".tif");
var saveFile = new File(decodeURI(outfolder) + "/" + docname + "-CR"+ ".tif");
SaveTIFF(saveFile);
activeDocument.close(SaveOptions.DONOTSAVECHANGES) ;
count++;
else if (fileList[a] instanceof Folder) {
// alert("Folder: " + fileList[a]);
ProcessFiles(fileList[a])
else {
// inappropriate file type, or null
function CropStraighten() {
function cTID(s) { return app.charIDToTypeID(s); };
function sTID(s) { return app.stringIDToTypeID(s); };
executeAction( sTID('CropPhotosAuto0001'), undefined, DialogModes.NO );
function SaveTIFF(saveFile){
tiffSaveOptions = new TiffSaveOptions();
tiffSaveOptions.embedColorProfile = true;
tiffSaveOptions.alphaChannels = true;
tiffSaveOptions.imageCompression = TIFFEncoding.TIFFLZW;
activeDocument.saveAs(saveFile, tiffSaveOptions, false, Extension.LOWERCASE);
function zeroPad(n, s) {
n = n.toString();
while (n.length < s) n = '0' + n;
return n;
Maybe you are looking for
-
Network connection fails with a "self assigned IP" or "no IP" msg displayed
I am having problems staying connected to the wireless network. I have four Macs - 3 MBPros and 1 iMac. They have all been upgraded to Snow Leopard and have had all recent updates from Apple. One of the MBP, and just now the iMac, keeps disconnecting
-
My flash and torch isn't working on my 5c why?
When I try to put the flash on when taking a picture it will not work and also the torch isnt working on my iPhone 5c ..helpppp
-
Interactive reporting CreateLimit function
Im using Interactive reproting 11.1.2.3. In the dashboard section for updating the values for the dropdown list boxes, im reading values from result section and add. Out of 10 dropdown boxes only one was not working. The code i used was function crea
-
FXO ports got jammed after a call is placed
Hi team. We have a analog line connected to an FXO port, every time we make a call through this line something happens and it's required for us to go to the gateway, unplug and plug again the line, next time anybody makes a call, it shows the same b
-
CAUTION-MAJOR BUG Address Book's "Merge Selected Cards" DELETES CONTENT!
I have just realized (after losing much data) that when using the Merge Selected Cards function within the Apple Address Book that it will, without notification, delete content! That's right, if the two cards share different data but have the same fi