Crop and Vignette - how to?

Hi,
I'd like to use a Vignette pre-set (or just the Vignette function), but I notice it creates the effect on the pre-cropeed image. In other words, let's say I crop an image, then apply vignette, how can I get LR to apply the effect to the cropped image and not the whole image?

One way to do it is to do a crop and then do an export in Photoshop or another 3-rd party editor exporting a file with all LR adjustments applied. Now don't do anything with the file in the external editor. Simply close it and return to LR where you can apply a vignette to the newly created file that is simply a crop of the original. The vignette will be as you'd expect it.

Similar Messages

Cropping and vignetting issues

I'm having issues when I crop, then try to apply vignetting. The vignetting effect is being applied to the original size image, causing an uneven vigneting effect. In other words, if my crop is the lower left portion of the image, the vignetting is dark in the lower left of the image but light in the upper right. How can I fix this? What am I doing wrong? At this point all I can do is crop in Photoshop first, then apply vignetting.

Vignetting is in the lens correction tab precisely because it is there to correct for lens vignetting. It can also be used in reverse to add vignetting to an image from a *lens*.
It is not designed to add vignetting to an *image*. There is presently no way to add vignetting after a crop. This is a commonly requested feature, but I suspect if it shows up, it will not be in the lens correction tab as at that point it is no longer a lens correction.

I cannot seem to figure out how to export the pictures I have worked on. I create a collection and when I export them they go to "my pictures" as the originals --NOT the cropped and edited versions. Help!!!

How to export you pictures after they have been edited?

Are you sure you are looking at the exported photos and not the original photos, when you say you don't see the cropping and editing?
If so, then you are probably exporting with Image Format set to "Original" and you probably want to set it to JPG or TIF

How do I stop banding in my gradients and vignetting?

How do I stop banding in my gradients and vignetting?

And finally, banding doesn't have to be in the file data, but can be in the monitor and/or calibration curves in the video card (8 bit video pipeline).

How do I finish editing a picture? I crop, and the photo still says it is being edited.

How do I get out of editing? I crop and size a photo and it has a belt around it saying it is still being edited. I need help.

Barbickfd
If your program is Photoshop Elements and not Premiere Elements, for your convenience, I am posting the link to the Adobe Photoshop Elements Forum where you can post your Photoshop Elements 12 crop question.
Photoshop Elements
Without further details, I am guessing that the Elements Organizer 12 is involved. You may have decided to edit a photo represented in the Elements Organizer, opened it in the Editor, and, then after the crop there, did not close out of the Editor, and went back to the Elements Organizer.
ATR

How to undo cropped and rotated RAW images in ACR

Can someone advise on returning to the original RAW image after the image has been edited in ACR.
"Reset Camera Raw Defaults" seems to do everything but undo crops and image rotation.
How do I undo these and/or return to the original unedited image?
Many thanks

Thanks but how exactly do I find the unedited CR2 within PSE/ACR?
Everytime I open the file in PSE or ACR the edited version comes up and the most original version I can return to is to reset the Defaults. However, this does not reverse crops and rotations
I have noticed that the original CR2 file is viewable within MS Explorer but I'm reluctant to delete the .xmp as I don't want to loose keywords etc associated with the image.
Many thanks for any suggestions

How do you crop and save a cropped image

How do you crop and save a cropped image in PS Touch?

This forum does not deal with any of the Touch applications.
Try here:
http://forums.adobe.com/community/photoshop_touch_for_phone
or here:
http://forums.adobe.com/community/creative_cloud_touch_apps/adobe_photoshop_touch

How will Aperture treat Nikon raw images which have been enhanced using Capture NX2 software? Some are cropped and "developed" and some have been enhanced using the control point technology. I have NIK sw as a plug-in in aperture.

How will Aperture treat Nikon raw images which have been enhanced using Capture NX2 software? Some are cropped and "developed" and some have been enhanced using the control point technology. I have NIK sw as a plug-in in aperture.

Actually, there is a Nik/Nikon connection — but I am pretty sure it is irrelevant to the OP's question. The connection is that Capture NX2 was written as a joint venture between Nikon and Nik. (The name similarity is a coincidence.)
Capture NX2 is a cool program that incorporates the features of Nik's Viveza and Nikon's Raw processing engine, along with some other powerful image adjustment features. It provides, like Aperture, a losses workflow. Unlike Aperture, the adjustments (Edit Steps in C-NX terminology) are saved in the original NEF file along with the un-altered raw data. Multiple versions can be saved in a single NEF.

HELP!!!! How to crop and save an image

I recently started using iPhoto when I bought a digital camera. I have figured out pretty much how to use it but I would like to crop AND SAVE some of the pictures. I have gone so far as to crop an image and print it but the print comes out like the original shot. Also is there some way to convert these images into smaller file sizes and saving for uploading onto another website? Thanks in advance! .
G5 2.0 DP and Powmac 7500/200 Mac OS X (10.3.9) 23" Cinema Display
G5 2.0 DP and Powmac 7500/200 Mac OS X (10.3.9) 23" Cinema Display

Hi imageconx1,
I think it will do you good to read the Help file for iPhoto. While iPhoto is open, hit the Help in the menubar.
You can also find the same info online on the iPhoto Support
site.
Cropping and saving image:
http://docs.info.apple.com/article.html?artnum=165597
Export photos and change size in the export window
http://docs.info.apple.com/article.html?artnum=165616

How to crop and delete a piece from a phot

How to crop and remove some part of a photo

You can use the crop tool for that, assuming you want to take a slice off it.
(in my menu it is listed above the eyedropper tool, or you could just press C)
You can then drag the box edges to fit the selection you want to keep.
To be more precise, turn off snapping by unchecking snap at View > Snap
If this does not do what you want, it would be handy if you added an image and description of what you want to change.

How do I Crop and transfer?

How do I crop an item, say a tree, from a picture and transfer it to another picture?

Canutoelbruto: I (dynomite) posted what I believe to be a similar question as yours. I noticed no reply. Did you ever figure out how to crop and transfer? Would you be willing to share?

How to retrieve original RAW image after cropping and opening RAW file?

Hi
I have a Canon EOS 350D camera and now have PSE 9. I have taken some RAW images & imported them into PSE 9 OK. I know the original RAW image is retained after editing. However, after cropping a RAW image in the Editor and then "Opening" and "Saving as" a PSD or JPEG, I then close the image in Editor and the cropped image appears in the Organiser. That is as it should be, I think. If I then wish to start again from scratch on the original RAW image, it seems to me that I have to manually delete the edited version and the .xmp file in Windows Explorer, and then double click the original RAW file in Windows Explorer, which then opens correctly in PSE 9 Editor. Can this be done from PSE 9?

When you open the original camera raw image, go to the flyout menu
and choose Camera Raw Defaults, that resets everything but the crop, straighten,
and rotatate settings.
To get rid of the crop and/or straighten settings, click and hold on the crop tool and choose Clear Crop.
To reset the Image rotation settings, you have manually rotate back using the image rotate buttons.
MTSTUNER

How to crop and sharpen photos

Where do I find information on cropping and sharpening photos that I want to use on projects? Thanks for your help.

Those functions are usually included with your software to provide those functions. It should have a full help facility.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

When placing a PDF created with Distiller, I only get Crop and Media as import options -- I need it to crop to the Trim! PLEASE HELP!

I'm having a MAJOR problem placing PDF files in InDesign CS4...
When I try to place a PDF that has been created in Distiller, the ONLY import options I can choose are CROP and MEDIA. I need it to crop to the TRIM, but that option is grayed out. The PDFs I'm trying to place were created in-house, and converted from Post Script files to PDFs using Distiller. We use PDF/X-1a equivalent settings when creating our PDFs.
If I export the file as a PDF and then try to place it into a CS4 file, I am able to select Trim as an option.
ALSO, if I open the Distiller PDF in Acrobat and then save it (without changing anything), I am able to select Trim as an option. A workaround I have found is to open all of the PDF files in Acrobat, save them to my desktop, and then save over the ones I need to place. Here's the problem with that: I work for a publishing company, and need to place hundreds of ads for each issue of our publications, and it adds a lot of time if I have to go and re-save everything just to be able to place all the ads.
Does anyone know how to fix this problem? I need to get this figured out so we can use CS4 for all of our publications again. -- We've gone back to using CS3 until I can get this figured out...
- Valerie

Steve,
Thanks for the reply, but my PDFs all have trim boxes on them. If I try to place the same PDF in InDesign CS3, it gives me Trim as an option. Also, if I open the PDF and save a copy to my desktop, I am able to select Trim as an option when placing the PDF, and I didn't change anything about it.
I've been trying to see if it's something with the Print Preset settings I'm using, but I can't find anything that seems like it would affect how InDesign would read the Trim area of the PDF.
I've attached 2 PDF files. One that was created with Distiller, and one that was exported from InDesign CS4. The Distiller one doesn't show Trim as an option in CS4, but the exported one does.... but they started out as the same ad. Ugh! Help me please!
- Valerie

Is there a way to adjust crop borders on Crop and Straighten?

I'm trying to use Photoshop CS3 to crop and straighten images of postage stamps. E.g., place a bunch of stamps on the scanner bed and scan them as one image. Then use Automate/Crop and Straighten Photos to create separate workspaces each with a single stamp image, cropped and rotated appropriately. This almost works; the problem is it often crops the stamps too closely, cutting off the perforations. The rotation is not always perfect either. For example, for the above image I get:
These two are pretty good except the perforation tips are trimmed off.
This one is a disaster
So I'm thinking if there were some way to specify how tightly the images are cropped, it might help solve the problem. Any other suggestions?

We now have a solution.
http://forums.adobe.com/thread/778507?tstart=0

Crop and Vignette - how to?

Similar Messages

Maybe you are looking for