Crop image in Photoshop Elements 9

how do i crop a photo to these dimensions 1500 X 1500 -could someone please help?
It's Version Photoshop Elements 9 - (I don't know if they are asking me to crop 1500 mm or Pixels) could you help with both ?

Dear sir or madam, when i went to (Image) on the tool bar and clicked "resize" then under the values blocks to be filled in, i typed the 1500 dimensions for both Height and Width in Pixels
- The Width automaitcailly changed it to 1640 ? whle the Height remaind the same and it shows at the top, overall Pixel dimensions 7.04M (i assume this is overall) ?
- The other way is to go direclty to the Edit / Create / Share columes off to the right hand side and under that is "QUICK" - there i am able to crop ...but when i type in 1500 on the upper value blocks it does not accept it ?
These are the only two wasy this version is allowing me to do anything... and i still don't know if any of it is right ?
The photos i have (that need to be exaclty 1500 x 1500 or 1200 x 1200 or 1700 x 1700) are at these dimensions currently:
1) Pixel Dimensions 11.8 M with a Width of 2125 Pixels
and Height of 1944 Pixels
2) Pixel Dimensions 13.5M with a Width of 2358 Pixels
and a Height of 1996 Pixels
OR if i chage each of them to Percents i can type in 1500 for Width but, it changes to closest value of 1272.26 Percent is what it reverts too
Sorry, coudl you help further ?

Similar Messages

Opening raw images in Photoshop Elements 9

When opening raw images in Photoshop Elements 9 (File -> Open or File -> Open As), the Adobe Camera Raw dialog do not open.
Instead I get a window with a progress bar and the text "Reading Camera Raw Format".
The image then opens in the Photoshop Elements editor.
I have tested this with raw images both from Canon EOS 1000D and Samsung WB2000 cameras.
I would appreciate any suggestions on how to solve this issue.
I run Photoshop Elements on a HP netbook running Widows XP and with an Intel Atom N450 / 1.66 GHz processor, 2 GB ram and a screen resolution of 1024 x 600 pixels.

Unfortunately you can't see the raw converter in PSE 9 on screens less than 800 px tall, which means not on netbooks. PSE will automatically convert it for you, but that dialog box and a few others, like the Advanced Downloader window, will not appear.

Photoshop and elements 13 Working in iPhoto Want to edit image using photoshop elements Did the following IPhoto Preferences Advanced Edit Photos: In drop down menu chose in Photoshop Elements Also control click and chose edit in external editor Drop

Photoshop and elements 13
Working in iPhoto
Want to edit image using photoshop elements
Did the following
IPhoto>Preferences>Advanced>Edit Photos: In drop down menu chose in Photoshop Elements
Also control click and chose edit in external editor
Drop down menu edit photos in external program>photoshop Elements
Go to to the image I'm working on --- selected the image, the clicked on edit. When nothing happened I double clicked the image. Still elements didn't open. Then I opened the Elements editor, went back to iphoto and tried the entire process again. the photo still didn't open on Elements 13 for editing.
I have 3 Elements 13 books as well as looked on line--all my references say the exact same thing ---- iPhoto>Preferences>advanced>edit in external program>photoshop Elements
I uninstalled and reinstalled both iPhoto as well as Elements.
I spoke with application technical support. There appears to be nothing wrong with my copy of iPhoto. However there is no support from Adobe. I waited for over 1.5 hours for chat support several days ago, and finally gave up.

You are probably choosing the obvious file rather than the correct file as the PSE editor. The actual editor is hidden away inside the Support Files folder. The PSE file at the top level of the PSE folder in Applications is just an alias for the welcome screen and what you're describing is exactly what happens when you choose that. You want this one:

How do I mirror an image in Photoshop Elements 9?

I am going to iron-on transfer my grandsons dino's onto a duvet cover for him, and I want the letters he used to show up correctly, so I have to "mirror" the image for iron-on transfer. How do I mirror an image in Photoshop Elements 9?

Image > Rotate > Flip Horizontal

I just upgraded to a 3ti from a rebel xt. When I try to open my RAW images in photoshop elements 5.

I just upgraded to a 3ti from a rebel xt. When I try to open my RAW images in photoshop elements 5.0 get an error message. I installed the camera raw update 4.2 but that didn't work. Any suggestions.

Hi,
Elements version 5 was made obsolete by Elements 6 back in 2007. The T3i was only released 2-3 years ago. Adobe was up to Elements version 9 or 10 by then. Every camera has its own particular camera raw software, and Adobe has to write an update for the software to work with each new camera's RAW files. And Adobe stops updating the old versions to work with new cameras when the next version of Elements/Lightroom come out.
I had to buy Lightroom 4 only 6 months after I had bought Lightroom 3 when I bought a new camera. The older version would not, and never will, work with the RAW files from my 6D.
You could, I believe, use DPP to convert the RAW files before exporting them into Elements 5, but personally I would just take this as a cue that it is time to get Elements 11. Or Lightroom 5. I personally prefer Lightroom.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

How do I download raw images into photoshop elements 11.

I am having difficulty downloading my raw images to photoshop elements 11. Files are currently on a thumb drive, but I don't know how to download to elements. I have the thumb drive plugged in --- not sure where to go from here. I have verified that I have the plug in - version 7.1.0.354.
Any ideas?

You can either drag them in Organizer workspace or import the folder. Or you can also use Adobe Photo Downloader. There are many options listed here http://helpx.adobe.com/photoshop-elements/getting-started/import-camera-or-card-reader.htm l
Thanks,
Garry

How do I bring tags on images from photoshop elements 8 to photoshop CS6

How do I bring tags on images from photoshop elements 8 to photoshop CS6

Mylenium wrote:
Ask in the PSE/ PS forums. The simple answer is, though, that unless they are emebedded in the image or exist as sidecar XMP files PS won't use them. It doesn't look inside the PSE catalog files/ database.
Mylenium
... which means you have to use the menu /file/write metadata to files so that the tags and ratings are written in the files or sidecar files themselves.

Cropping layer in Photoshop Elements

Hey~
I have just started using Photoshop Elements.I have three different pictures i their each individual layerss. I would like to crop one and when i use the crop tool it crops all the layers together. I have done my research and i tried using the Marquee Rectangular tool to select what I want. But, after I Inverse, I cant do Edit Clear( as suggested else where) becasue it "won't work". I also cannot do cntrl J to select that in a new layer. It just wont let me.
If this doesn't make sense, feel free to ask questions.
I appriciate any kind of help:-)
Thank you!

Here's a couple of non-destructive methods to crop a layer.
With the layer selected, make your selection with the marquee. Right-click the selection and select Layer via Copy. Hide the original layer.
With the layer selected, make your selection with the marquee, click Add Layer Mask. I like this one as (if you unlink the mask) you can then reposition the mask in the layer image.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Undo cropping done via Photoshop elements

I dragged a photo directly from iPhoto into Photoshop Elements (rather than saving it to the desktop first, then dragging to Elements) and cropped it, then clicked "save." Now when I go into iPhoto, I can see the full, uncropped image in the thumbnail, but when I double-click to enlarge it, I can see only my edited image from Photoshop. I tried to control/click on the image to "restore to original," but that option was not available to me. I no longer have the image in my camera. Is there a solution?

No, because that's not how you use iPhoto and Elements together.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
Regards
TD

Can't open raw images in Photoshop Elements 9

I've just finished doing a fresh install of Windows 7 x64 SP1 onto my desktop PC. I installed Photoshop Elements 9 but it can't open any raw images (specifically Canon .CR2). When I open one of the same images with Photoshop CS5.1, it properly opens up the image in Camera Raw (6.6), allows me to pre-process the image, then edits it in Photoshop (as you would expect).
Before installing Photoshop, I did manually install Adobe Camera Raw 6.2, then upgrade it (multiple steps) up to the current v6.6.
I also copied the Camera Raw.8bi into the Plug-Ins\File Formats sub-directory of both C:\Program Files (x86)\Adobe\Elements 9 Organizer and C:\Program Files (x86)\Adobe\Photoshop Elements 9 but there was no change of behavior with Photoshop Elements 9.
This was working prior to the re-install of Windows 7.
Any suggestions on how to get this working? Thank you, in advance.

When I to to Help>Update, it offers to update Photoshop Elements to v9.0.3 but no mention is made of Camera Raw (any version). I'm not even sure how to determine what version it thinks is installed since there's no reference to Adobe Camera Raw in the Windows 7 Programs and Feature Control Panel applet.
Suggestions?

Raw images in Photoshop Elements 3

Hi. I just got a new pc that has Windows Vista. I installed Photoshop Elements and CS2, and now I am trying to upload raw images to PE3, but it keeps uploading the jpeg file, not the raw. It works on XP, but not Vista. Is it a o/s problem or am i doing something else wrong. I am using a Canon EoS 20 D, and my PS3 and CS2 are all updated. Upgrading the software is not an option at the moment, so any help would be appreciated!

It could well be an OS problems as I believe that PSE 5 was the first that Adobe supported in Vista and that needed a patch to make it 5.02.

Olympus E500 RAW Image in Photoshop Elements 4.0

I am trying to find out if anyone has worked with the Olympus RAW Image (.orf) in Photoshop Elements. I downloaded the plug-in from the Olympus America site and installed it into Elements. Although the plug-in said that it was for Photoshop 5.0 or higher it loaded fine. However, when I open an image in Elements the interface is very basic and does not look at all like the Elements 4.0 interface. Thus I am wondering if anyone else has tried to use the Olympus RAW image with Photoshop and found a better plug in?
Alternatively is someone can give me some other input on how to edit these photos I would be appreciative.

You want to ditch that Olympus plug-in - i.e., take it out of the plug-ins
folder in Elements - and make sure you have the version of Adobe Camera Raw
which covers your camera. Once you find that, install it in place of the
one that shipped with Elements (probably 2.4) and your images ought to open
directly into ACR.

Can not open Lightroom 5 image in Photoshop Elements 12

I just purchased PSE 12. In Lightroom 5, I can set up an Edit in Photoshop Elements preset.
When I try to edit a .dng or .cr2 raw image in PSE from Lr5, the first dialog I get asks if I want to edit a copy with Lr adjustments. Then PSE opens but no file(s) are loaded.
If I open the file directly from PSE 12, it will open (with Lr5 adjustments)... but that's not the point.
Any ideas on getting the Lightroom 5 --> PSE 12 workflow to operate properly?

I don't want to seem flippant, but that's exactly what I did - Actually I set up 2 presets here (one for Adobe RGB & one for sRGB).
As I stated previously, I set these up on 2 different computers (a MacPro and a MacBook Pro), each computer running a different version of OS-X (Lion & Mavericks, respectively).
I have successfully set up several external editors using various stand-alone programs - they all still work -- with the exception of Photoshop Elements 12.

Cant import NEF RAW images into Photoshop Elements 9.

before anyone says i have the updated camera raw plug in because i have already looked so it should work, but it doesnt.
i took the images with the Nikon D3200 i NEF RAW format.
but photoshop kept on saying that the format was not supported, i was opening them up through FILE, OPEN, then i was browsing for the photos, but it would keep ion saying that the file was not supported.
but then i saw some where that you ha to open the image up through OPEN AS, so i did it that way, and for a moment it looked like it was working but then photoshop elements 9 crashed and it said it couldnt open up the image due to problem, can someone help me.
for the time being i will just use the JPEG images because i took and NEF RAW image and a JPEG image at the same time, which later on i will just replace the image with the NEF RAW image when i get it to work.
but until then cam some one help me try to get it to work, thank you.

before anyone says i have the updated camera raw plug in because i have already looked so it should work, but it doesnt.
The problem is that PSE9 will not support the version of camera raw that is needed for D3200 RAW files.
To make use of these D3200 RAW files, you need to download the FREE Adobe DNG Converter (version 8.2) and then use that software to convert the RAW to DNG.
Alternatively, you could purchase PSE 12, and then your D3200 RAW files will open properly without need for a converter.

Automated Resizing of Images in Photoshop Elements 9

I recently upgraded my wife's Photoshop Elements from version 6 to version 9. However, there is one feature from version 6 that seems to not work in version 9. When she drags an image into a blank template (of any size), the image drags in to the template in the full size. So if the images are three times larger than the template, she has to resize every image after she drags them in which is a pain for her. Previously in PSE6, when she dragged the image into the blank template, the program would automatically resize the image to fit within the window. Then she could resize the iamge if she needed to. It seems that there should be a setting for this, but I am coming up with nothing. Anybody know of a solution to this?

You didn't say if your on mac or windows, so you may not be familar
with the elements organizer. The following workaround works on windows pse9,
if your on a mac it may also.
1. In the elements organizer, select (highlight) the photos you want to use.
    (don't open the photos into the elements editor, just select them)
2. Back in the elements editor, with the project bin open, choose
   Show Files Selected in the Organizer.
3. When you drag the photos from the project bin into your document, they should resize
   similar to pse6.
   If they are still to big, step back one step in the undo history panel from Transform the Frame to Place.
MTSTUNER

Crop image in Photoshop Elements 9

Similar Messages

Maybe you are looking for